FREE ENGLISH HONDA CIVIC 2010 (01) PDF USER GUIDE
FREE ENGLISH HONDA CIVIC 2010 (01) PDF USER MANUAL
FREE ENGLISH HONDA CIVIC 2010 (01) PDF OWNER GUIDE
FREE ENGLISH HONDA CIVIC 2010 (01) PDF OWNER MANUAL
FREE ENGLISH HONDA CIVIC 2010 (01) PDF REFERENCE GUIDE
FREE ENGLISH HONDA CIVIC 2010 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH HONDA CIVIC 2010 (01) PDF REFERENCE MANUAL
FREE ENGLISH HONDA CIVIC 2010 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH HONDA CIVIC 2010 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD HONDA CIVIC 2010 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
HONDA CIVIC 2010 (01) PDF SUMMARY:
How can I avoid damage to the vehicle, other property, or the environment?
As you read the PDF, you will find information that is preceded by a symbol. This information is intended to help you avoid damage to your vehicle, other property, or the environment.
What should I keep in mind when my vehicle needs maintenance?
When your vehicle needs maintenance, keep in mind that your dealer’s staff is specially trained in servicing the many systems unique to your vehicle. Your dealer is dedicated to your satisfaction and will be pleased to answer any questions and concerns.
How do I use the horn?
To use the horn, press the center pad of the steering wheel.
What should I do to close and lock the doors?
Be sure the doors are closed and locked. Locking the doors reduces the chance of someone being thrown out of the vehicle during a crash, and it helps prevent passengers from accidentally opening a door and falling out. Locking the doors also helps prevent an outsider from unexpectedly opening a door when you come to a stop.
How should front seats be adjusted?
Adjust the driver’s seat as far to the rear as possible while allowing you to maintain full control of the vehicle. Have a front passenger adjust their seat as far to the rear as possible.
What should I do after adjusting my seat?
Once your seat is adjusted correctly, rock it back and forth to make sure the seat is locked in position.
How should seat-backs be adjusted?
Adjust the driver’s seat-back to a comfortable, upright position, leaving ample space between your chest and the airbag cover in the center of the steering wheel. Passengers with adjustable seat-backs should also adjust their seat-back to a comfortable, upright position.
How should head restraints be adjusted?
Adjust the driver’s head restraint so the center of the back of your head rests against the center of the restraint. Have passengers adjust their head restraints properly as well. Taller persons should adjust their restraint as high as possible.
How should I fasten and position the seat belts?
Position the lap part of the belt as low as possible across your hips, then pull up on the shoulder part of the belt so the lap part fits snugly. Insert the latch plate into the buckle, then tug on the belt to make sure the belt is securely latched. Check that the belt is not twisted, because a twisted belt can cause serious injuries in a crash. If necessary, pull up on the belt again to remove any slack, then check that the belt rests across the center of your chest and over your shoulder.
What should occupants do after adjusting their seats and head restraints, and putting on their seat belts?
After all occupants have adjusted their seats and head restraints, and put on their seat belts, it is very important that they continue to sit upright, well back in their seats, with their feet on the floor, until the vehicle is safely parked and the engine is off.
What should I do if the seat belt touches or crosses my neck, or if it crosses my arm instead of my shoulder?
If the seat belt touches or crosses your neck, or if it crosses your arm instead of your shoulder, you need to adjust the seat belt anchor height. The front seats have adjustable seat belt anchors. To adjust the height of an anchor, press and hold the release button and slide the anchor up or down as needed (it has four positions).
What should I do if a seat belt does not seem to work properly?
If a seat belt does not seem to work properly, it may not protect the occupant in a crash. Have your dealer check the belt as soon as possible.
What should I do to maintain a proper sitting position?
Never place the shoulder portion of a lap/shoulder belt under your arm or behind your back. No one should sit in a seat with an inoperative seat belt.
What should a pregnant woman do to protect herself and her unborn child?
If you are pregnant, the best way to protect yourself and your unborn child when driving or riding in a vehicle is to always wear a seat belt, and keep the lap part of the belt as low as possible across the hips. When driving, remember to sit upright and adjust the seat as far back as possible while allowing full control of the vehicle. When riding as a front passenger, adjust the seat as far back as possible.
What should I do during checkups while pregnant?
Each time you have a checkup, ask your doctor if it’s okay for you to drive.
What additional safety precautions should I be aware of?
Keep your hands and arms away from the airbag covers. Do not place hard or sharp objects between yourself and a front airbag. Do not attach or place objects on the front airbag covers. Two people should never use the same seat belt. Do not put any accessories on seat belts. Do not attach hard objects on or near a door. Do not cover or replace front seat-back covers without consulting your dealer.
What should I look for and remove if the indicator comes on or the beeper sounds when the driver’s seat belt is latched and there is no front seat passenger and no items on the front seat?
Look for and remove any items under the front passenger’s seat. Remove any object(s) hanging on the seat or in the seat-back pocket. Remove any object(s) touching the rear of the seat-back.
What should I do if no obstructions are found in the front passenger seat?
If no obstructions are found, have your vehicle checked by a dealer.
How do I fasten the lap/shoulder belt?
To fasten the belt, insert the latch plate into the buckle, then tug on the belt to make sure the buckle is latched.
How do I unlock the lap/shoulder belt?
To unlock the belt, press the red PRESS button on the buckle. Guide the belt across your body so that it retracts completely. After exiting the vehicle, be sure the belt is out of the way and will not get closed in the door.
How do I deactivate the lockable retractor?
To deactivate the lockable retractor, unlatch the buckle and let the seat belt fully retract. To refasten the seat belt, pull it out only as far as needed.
What should I do if a seat belt is worn during a crash?
If a seat belt is worn during a crash, it must be replaced by the dealer. A belt that has been worn during a crash may not provide the same level of protection in a subsequent crash.
What should the dealer do if a seat belt is worn during a crash?
The dealer should also inspect the anchors for damage and replace them if needed. If the automatic seat belt tensioners activate during a crash, they must be replaced.
How often should I check the condition of my seat belts?
For safety, you should check the condition of your seat belts regularly.
How do I check the condition of my seat belts?
Pull each belt out fully, and look for frays, cuts, burns, and wear. Check that the latches work smoothly and the belts retract easily. If a belt does not retract easily, cleaning the belt may correct the problem.
What should I do if the SRS indicator alerts me to a possible problem?
Have your vehicle checked by a dealer as soon as possible if the SRS indicator alerts you to a possible problem.
What should I do if my airbag systems need servicing?
Take your vehicle to an authorized dealer as soon as possible.
What should I look for and remove if the indicator comes on with no front seat passenger and no objects on the seat, or with an adult riding there?
Look for and remove any items under the front passenger’s seat. Remove any object(s) hanging on the seat or in the seat-back pocket. Remove any object(s) touching the rear of the seat-back.
What should I do if no obstructions are found after the indicator comes on with no front seat passenger and no objects on the seat, or with an adult riding there?
If no obstructions are found, have your vehicle checked by a dealer as soon as possible.
What should be done if an airbag ever inflates?
Any airbag that has deployed must be replaced along with the control unit and other related parts. Any seat belt tensioner that activates must also be replaced.
What should my dealer do even if my airbags do not inflate?
Even if your airbags do not inflate, your dealer should inspect the driver’s seat position sensor, the front passenger’s weight sensors, the front seat belt tensioners, and all seat belts and their anchors worn during a crash to make sure they are operating properly.
What should I do if it is necessary to remove or modify a front seat to accommodate a person with disabilities?
If it is necessary to remove or modify a front seat to accommodate a person with disabilities, first contact Honda Automobile Customer Service at (800) 999-1009.
What should I do if water or another liquid soaks into a seat-back?
If water or another liquid soaks into a seat-back, it can prevent the side airbag cutoff system from working properly.
What should I teach my children about playing in vehicles?
Teach your children not to play in or around vehicles.
What should I know and decide about the emergency trunk opener?
Know how to operate the emergency trunk opener and decide if your children should be shown how to use this feature.
What should I make sure of any unused seat belt that a child can reach?
Make sure any unused seat belt that a child can reach is buckled, the lockable retractor is activated, and the belt is fully retracted and locked.
What kind of child seat should an infant be restrained in?
An infant must be properly restrained in a rear-facing, reclining child seat until the child reaches the seat maker’s weight or height limit for the seat, and the child is at least one year old.
What should I do if a rear-facing child seat prevents the driver or a front passenger from moving their seat as far back as recommended, or from locking their seat-back in the desired position?
We strongly recommend that you install the child seat directly behind the front passenger’s seat, move the seat as far forward as needed, and leave it unoccupied. Or, you may wish to get a smaller rear-facing child seat.
What should I do after selecting a proper child seat and a good place to install the seat?
After selecting a proper child seat and a good place to install the seat, there are three main steps in installing the seat: Properly secure the child seat to the vehicle. Make sure the child seat is firmly secured. Secure the child in the child seat.
How do I install a LATCH-compatible child seat?
Move the seat belt buckle or tongue away from the lower anchors. Make sure there are no objects near the anchors that could prevent a secure connection between the child seat and the anchors. Place the child seat on the vehicle seat, then attach the seat to the lower anchors according to the child seat maker’s instructions.
How do I install a tether strap?
Lift the head restraint, then route the tether strap through the legs of the head restraint and over the seat-back, making sure the strap is not twisted. Attach the tether strap hook to the tether anchor, then tighten the strap as instructed by the child seat maker. If the tether strap is too long and cannot be tightened firmly, find a route where the strap can be tightened securely.
How do I install a child seat with a lap/shoulder belt?
With the child seat in the desired seating position, route the belt through the child seat according to the seat maker’s instructions, then insert the latch plate into the buckle and remove any slack from the lap portion of the belt. To activate the lockable retractor, slowly pull the shoulder part of the belt all the way out until it stops, then let the belt feed back into the retractor. After the belt has retracted, tug on it. If the belt is locked, you will not be able to pull it out. If you can pull the belt out, it is not locked, and you will need to repeat these steps.
How do I deactivate the lockable retractor and remove a child seat?
To deactivate the lockable retractor and remove a child seat, unlatch the buckle, unroute the seat belt, and let the belt fully retract.
What should I do after properly securing the child seat?
After properly securing the child seat, lift the head restraint, then route the tether strap over the seat-back and through the head restraint legs. Lift the anchor cover, then attach the tether strap hook to the anchor, making sure the strap is not twisted. Tighten the strap according to the seat maker’s instructions. If the tether strap is too long and cannot be tightened firmly, find a route where the strap can be tightened securely.
How do I determine if a lap/shoulder belt properly fits a child?
To determine if a lap/shoulder belt properly fits a child, have the child put on the seat belt, then ask yourself: Does the child sit all the way back against the seat? Do the child’s knees bend comfortably over the edge of the seat?
When should a child use a booster seat?
A child who has outgrown a forward-facing child seat should ride in a back seat and use a booster seat until the lap/shoulder belt fits them properly without the booster. If you answer no to any of the following questions, the child needs to ride on a booster seat:
- Does the shoulder belt cross between the child’s neck and arm?
- Is the lap part of the belt as low as possible, touching the child’s thighs?
- Will the child be able to stay seated like this for the whole trip?
What kind of booster seats are available?
Booster seats can be high-back or low-back. Whichever style is selected, make sure the booster seat meets federal safety standards and that you follow the booster seat maker’s instructions.
What should be done if a child who uses a booster seat must ride in the front?
If a child who uses a booster seat must ride in front, move the vehicle seat as far back as possible, and be sure the child is wearing the seat belt properly.
When can a child stop using a booster seat?
A child may continue using a booster seat until the tops of their ears are even with the top of the vehicle’s or booster’s seat-back. A child of this height should be tall enough to use the lap/shoulder belt without a booster seat.
What should you do to prepare for a larger child to safely ride in front?
If you decide that a child can safely ride up front, be sure to:
- Carefully read the owner’s manual, and make sure you understand all seat belt instructions and all safety information.
- Move the vehicle seat to the rear-most position.
- Have the child sit up straight, back against the seat, and feet on or near the floor.
- Check that the child’s seat belt is properly positioned and secured.
- Supervise the child. Even mature children sometimes need to be reminded to fasten the seat belts or sit properly.
What physical requirements must a child meet to safely ride in the front?
Physically, a child must be large enough for the lap/shoulder belt to properly fit. If the seat belt does not fit properly, with or without the child sitting on a booster seat, the child should not sit in front.
What maturity requirements must a child meet to safely ride in front?
To safely ride in front, a child must be able to follow the rules, including sitting properly, and wearing the seat belt properly throughout a ride.
What does The National Highway Traffic Safety Administration and Transport Canada recommend for children age 12 and under?
The National Highway Traffic Safety Administration and Transport Canada recommend that all children age 12 and under be properly restrained in a back seat.
What should you not do regarding a child and a seat belt?
- Do not let a child wear a seat belt across the neck. This could result in serious neck injuries during a crash.
- Do not put any accessories on a seat belt. This could cause very serious injuries during a crash. It also increases the chance that the child will slide under the belt in a crash and be injured.
- Do not let a child put the shoulder part of a seat belt behind the back or under the arm. If they do, they could be very seriously injured in a crash.
- Two children should never use the same seat belt.
What should you do if you must sit in your parked vehicle with the engine running?
If you must sit in your parked vehicle with the engine running, even in an unconfined area, adjust the heating and cooling system as follows:
- Select the fresh air mode.
- Select the mode.
- Turn the fan on high speed.
- Set the temperature control to a comfortable setting.
What should you do if you must drive with the trunk open?
If you must drive with the trunk open, open all the windows, and set the heating and cooling system.
When should you have the exhaust system inspected for leaks?
Have the exhaust system inspected for leaks whenever:
- The vehicle is raised for an oil change.
- You notice a change in the sound of the exhaust.
- The vehicle was in a collision that may have damaged the underside.
What should you do if a label comes off or becomes hard to read?
If a label comes off or becomes hard to read (except for the U.S. dashboard label which may be removed by the owner), contact your dealer for a replacement.
How can you switch the information display between the odometer, trip meter, outside temperature (if equipped), and engine oil life and maintenance item code(s)?
To switch the information display between the odometer, trip meter, outside temperature (if equipped), and engine oil life and maintenance item code(s), press the SEL/RESET button repeatedly.
How do you reset a trip meter?
To reset a trip meter, display it, and then press and hold the SEL/RESET button until the number resets to ‘‘0.0’’.
How can you adjust the outside temperature display?
If the outside temperature is incorrectly displayed, you can adjust it up to 5°F ( 3°C) warmer or cooler. The temperature must be stabilized before doing this procedure.
- Select the outside temperature display, then press and hold the SEL/RESET button for 10 seconds. The following sequence will appear for 1 second each: 0, 1, 2, 3, 4, 5, 5, 4, 3, 2, 1, 0 (U.S.) or 0, 1, 2, 3, 3, 2, 1, 0 (Canada).
- When it reaches the desired value, release the SEL/RESET button. You should see the new outside temperature displayed.
What should you do if a “CHECK FUEL CAP” message appears on the information display?
Turn the engine off, and confirm the fuel fill cap is installed. If it is, loosen it, then retighten it until it clicks at least once. The message should go off after several days of normal driving once you tighten or replace the fuel fill cap. To scroll to another display, press the SEL/RESET button. The ‘‘CHECK FUEL CAP’’ message will appear each time you restart the engine until the system turns the message off.
What should you do if the system still detects a leak in your vehicle’s evaporative emissions system?
If the system still detects a leak in your vehicle’s evaporative emissions system, the malfunction indicator lamp (MIL) comes on. If the fuel fill cap was not already tightened, turn the engine off, and check or retighten the fuel fill cap until it clicks at least once. The MIL should go off after several days of normal driving once the cap is tightened or replaced. If the MIL does not go off, have your vehicle inspected by a dealer.
How do you use the horn?
To use the horn, press the center pad of the steering wheel.
How do you select a windshield wiper position?
Push the right lever up or down to select a position.
What do the windshield wiper positions do?
- MIST: The wipers run at high speed until you release the lever.
- OFF: The wipers are not activated.
- INT: The wipers operate every few seconds. Vary the delay by turning the adjustment ring. If you turn it to the shortest delay ( position), the wipers change to low speed operation when the vehicle speed exceeds 12 mph (20 km/h).
- LO: The wipers run at low speed.
- HI: The wipers run at high speed.
At low speed and high speed, the wipers run continuously.
On EX-L, Si, U.S. EX, and Canadian Sport models, the length of the wiper interval is varied automatically according to the vehicle’s speed.
While the vehicle is stopped and in gear, the wipers sweep the windshield whenever you remove your foot from the brake pedal.
How do you use the windshield washers?
Pull the wiper control lever toward you, and hold it. The washers spray until you release the lever. The wipers run at low speed, then complete one more sweep after you release the lever.
How do you turn on the headlights?
Turning the switch to the ‘‘ ’’ position turns on the headlights. If you leave the lights on with the key removed from the ignition switch, you will hear a reminder chime when you open the driver’s door.
How do you flash the high beams?
To flash the high beams, pull the lever back lightly, then release it. The high beams will stay on as long as you hold the lever back.
How do you signal a turn?
Push down on the lever to signal a left turn and up to signal a right turn. To signal a lane change, push lightly on the lever, and hold it. The lever will return to center when you release it or complete a turn.
How do you turn on the high beams?
Push the lever forward until you hear a click. The high beam indicator will come on. Pull the lever back to return to the low beams.
How do you turn on the parking lights?
Turning the switch to the ‘‘ ’’ position turns on the parking lights, taillights, instrument panel lights, side-marker lights, and rear license plate lights.
How do daytime running lights operate?
With the headlight switch off or position, the high beam headlights come on with reduced brightness when you turn the ignition switch to the ON (II) position and release the parking brake. They remain on until you turn the ignition switch off, even if you set the parking brake. The headlights revert to normal operation when you turn them on with the switch.
When can you use the fog lights?
You can use the fog lights only when the headlights are on low beam. They will go off when the headlights are turned off.
Turn the fog lights on and off by turning the switch next to the headlight switch.
How do you adjust the instrument panel brightness?
The buttons under the left side vent control the brightness of the instrument panel. Push the or button to adjust the brightness. Separate adjustments can be made when the headlights are on and off.
There are six brightness levels. When you push either button, the information display indicates the current level. You will hear a tone when you reach the maximum or minimum brightness. The display returns to the odometer 5 seconds after you stop adjusting the brightness.
How do you use the rear window defogger?
Push the defogger button to turn it on and off. The indicator in the button comes on to show the defogger is on. If you do not turn it off, the defogger will shut itself off after about 15 minutes. It also shuts off when you turn off the ignition switch. You have to turn the defogger on again when you restart the vehicle.
How do you turn on the hazard warning lights?
Push the button to turn on the hazard warning lights (four-way flashers). This causes all four outside turn signals and both turn indicators in the instrument panel to flash. Use the hazard warning lights if you need to park in a dangerous area near heavy traffic, or if your vehicle is disabled.
How do you adjust the steering wheel?
- Push the lever under the steering column all the way down.
- Move the steering wheel up or down, and in or out, so it points toward your chest, not toward your face. Make sure you can see the instrument panel gauges and indicators.
- Push the lever up to lock the steering wheel in position.
- Make sure you have securely locked the steering wheel in place by trying to move it up, down, in, and out.
What keys are provided?
The master key fits all the locks on your vehicle. The valet key works only in the ignition and the door locks. You can keep the trunk and trunk release handle locked when you leave your vehicle and the valet key at a parking facility.
What should you do if the immobilizer system indicator starts to blink?
Turn the ignition switch to the LOCK (0) position, remove the key, reinsert it, and turn the ignition switch to the ON (II) position again.
What are the ignition switch positions?
The ignition switch has four positions: LOCK (0), ACCESSORY (I), ON (II), and START (III).
- LOCK (0): You can insert or remove the key only in this position. To turn the key, push it in slightly. If your vehicle has an automatic transmission, the shift lever must also be in park.
- ACCESSORY (I): You can operate the audio system and the accessory power sockets in this position.
- ON (II): This is the normal key position when driving. Several of the indicators on the instrument panel come on as a test when you turn the ignition switch from the ACCESSORY (I) to the ON (II) position.
- START (III): Use this position only to start the engine. The switch returns to the ON (II) position when you let go of the key.
How do you lock and unlock the doors?
Each door has a lock tab next to the inside door handle. Pull the tab out to lock the door, and push it in to unlock the door.
To lock any passenger’s door when getting out of the vehicle, pull the lock tab out, and close the door. To lock the driver’s door, pull and hold the outside door handle, then pull the lock tab out. Release the handle, then close the door.
How can you lock the doors using the master door lock switch?
To lock the doors, push the top of the master door lock switch on either front door, pull out the lock tab on the driver’s door, or use the key in the outside lock on the driver’s door.
How can you unlock the doors using the master door lock switch?
Pushing the bottom of either master door lock switch unlocks all doors.
How do the childproof door locks work?
Each rear door has a lock lever near the edge. With the lever in the LOCK position, the door cannot be opened from the inside regardless of the position of the lock tab. To open the door, push the lock tab in, and use the outside door handle.
How can you turn off the Auto Door Lock modes?
- Make sure the shift lever is in the Park (P) position (A/T vehicles).
- Turn the ignition switch to the ON (II) position, and open the driver’s door.
- Push and hold the front of the master door lock switch on the driver’s door. You will hear a click. Keep holding the switch until you hear another click (after about 5 seconds).
- Release the switch, and within 5 seconds, turn the ignition switch to the LOCK (0) position.
How do you program the Park Lock mode?
- Make sure the shift lever is in the Park (P) position.
- Turn the ignition switch to the ON (II) position, and make sure to close the driver’s door.
- Push and hold the front of the master door lock switch on the driver’s door until you hear a click (after about 5 seconds).
- Release the switch, and within 5 seconds, turn the ignition switch to the LOCK (0) position.
How can you turn off the Auto Door Unlock modes?
- Make sure the shift lever is in the Park (P) position (A/T vehicles).
- Turn the ignition switch to the ON (II) position, and make sure to close the driver’s door.
- Push and hold the rear of the master door lock switch on the driver’s door. You will hear a click, and after about 5 seconds, you will hear another click.
- Release the switch, and within 5 seconds, turn the ignition switch to the LOCK (0) position.
How do you program the Ignition Switch Unlock mode?
- Make sure the shift lever is in the Park (P) position (A/T vehicles).
- Turn the ignition switch to the ON (II) position, and make sure to close the driver’s door.
- Push and hold the rear of the master door lock switch on the driver’s door. You will hear a click. Continue to hold the switch:
- Until you hear another click (after about 5 seconds) to activate driver’s door unlock feature.
- Or, until you hear two more clicks (after about 10 seconds) to activate all doors unlock feature.
- Release the switch, and within 5 seconds, turn the ignition switch to the LOCK (0) position.
How do you program the Park Unlock mode?
- Make sure the shift lever is in the Park (P) position.
- Turn the ignition switch to the ON (II) position, and make sure to close the driver’s door.
- Push and hold the rear of the master door lock switch on the driver’s door. You will hear a click. Continue to hold the switch:
- Until you hear another click (after about 5 seconds) to activate driver’s door unlock feature.
- Or, until you hear two more clicks (after about 10 seconds) to activate all doors unlock feature.
- Turn the ignition switch to the LOCK (0) position.
- push and hold the brake pedal, then move the shift lever out of the Park (P) position.
- move the shift lever to the Park (P) position.
- Release the switch, and within 5 seconds, turn the ignition switch to the ACCESSORY (I) position.
How do you open the trunk?
To open the trunk, pull the trunk release handle on the left side of the driver’s seat. To protect items in the trunk when you need to give the key to someone else, lock the trunk release handle with the master key, and give the other person the valet key.
How do you use the emergency trunk opener?
To open the trunk, push the release lever in the direction pointed by an arrow.
How do you close the trunk?
To close the trunk, press down on the trunk lid.
How do you use the remote transmitter to lock all doors?
Press this button once to lock all doors. Some exterior lights will flash once. When you push LOCK twice within 5 seconds, you will hear a horn to verify that the doors are locked. You cannot lock the doors if any door is not fully closed or the key is in the ignition switch.
What happens if you unlock the doors with the remote transmitter, but do not open any of the doors within 30 seconds?
If you unlock the doors with the remote transmitter, but do not open any of the doors within 30 seconds, the doors automatically relock. On U.S. LX, LX-S, EX, EX-L, and Si models, the security system will also set.
How do you verify that the security system has set?
If you push the LOCK button twice within 5 seconds, you will hear a horn to verify that the security system has set.
How do you unlock the doors using the remote transmitter?
Press this button once to unlock the driver’s door. Push it twice to unlock the other doors. Some exterior lights will flash twice each time you press the button. This button does not work when the key is in the ignition switch.
How do you open the trunk using the remote transmitter?
Press this button for about 1 second to open the trunk. You cannot open the trunk if the key is in the ignition switch.
How do you use the panic button on the remote transmitter?
Press this button for about 1 second to attract attention; the horn will sound and the exterior lights will flash for about 30 seconds. To cancel panic mode, press any other button on the remote transmitter, or turn the ignition switch to the ON (II) position.
How do you replace the remote transmitter battery?
- Remove the screw at the base of the transmitter with a small Phillips-head screwdriver.
- Separate the transmitter by prying its middle seam with your fingernail.
- Inside the transmitter, separate the inner cover from the keypad by releasing the two tabs on the cover.
- Remove the old battery from the back of the inner cover, and note the polarity. Make sure the polarity of the new battery is the same ( side facing down), then insert it into the back of the cover.
- Install the parts in reverse order.
How do you adjust the seat forward or backward?
To adjust the seat forward or backward, pull up on the bar under the seat cushion’s front edge. Move the seat to the desired position, and release the bar. Try to move the seat to make sure it is locked in position.
How do you change the seat-back angle?
To change the seat-back angle, pull up on the lever on the outside of the seat bottom.
How do you adjust the driver’s seat height?
To raise the seat, repeatedly pull up the lever on the outside of the seat cushion. To lower the seat, push the lever down repeatedly.
How do you adjust the head restraints?
To raise it, pull upward. To lower the restraint, push the release button sideways, and push the restraint down.
How do you remove a head restraint for cleaning or repair?
To remove a head restraint for cleaning or repair, pull it up as far as it will go. Push the release button, then pull the restraint out of the seat-back.
When reinstalling a head restraint, put the legs back in place. Then adjust it to the appropriate height while pressing the release button. Make sure the head restraint locks in position when you reinstall it.
How do I move the rear center shoulder belt when storing cargo?
You can move the rear center shoulder belt out of the way by removing the belt from the guide.
How do I lock the seat-back upright?
Push it firmly against the trunk panel. Make sure it is latched in place by pulling on the top of the seat.
How do I release the seat-back?
Pull the release under the trunk panel. Push the seat-back down, then let go of the release.
Can the left and right seat-backs be folded separately from inside the trunk?
Yes, the left and right seat-backs can be folded separately from inside the trunk.
What should I make sure of when carrying cargo?
- Make sure all items in the trunk, or items extending through the opening into the back seat, are secured. Loose items can fly forward and cause injury if you have to brake hard.
- Make sure that the folded seat-back does not press against the front passenger’s seat, as this could cause the weight sensors to work improperly.
- Make sure all rear shoulder belts are positioned in front of the rear seat-back, and the center shoulder belt is re-positioned in the guide whenever the seat-back is in its upright position. Be sure there are no twists in any shoulder belt.
- Do not put any heavy items on the seat-back when it is folded down.
Is it safe to drive with the seat-back folded down and the trunk lid open?
No, never drive with the seat-back folded down and the trunk lid open.
What precautions should I follow when using the seat heaters?
- Use the HI setting only to heat the seats quickly, because it draws large amounts of current from the battery.
- If the engine is left idling for an extended period, do not use the seat heaters, even on the LO setting. It can weaken the battery, causing hard starting.
How do the seat heaters work in the LO setting?
In the LO setting, the heater runs continuously. It does not cycle with temperature changes.
How do the seat heaters work in the HI setting?
In the HI setting, the heater turns off when the seat gets warm and turns back on after the seat’s temperature drops.
What position does the ignition switch need to be in to use the seat heaters?
The ignition switch must be in the ON (II) position to use seat heaters.
How do I rapidly heat up the seat?
Push the top of the switch, HI, to rapidly heat up the seat.
How do I keep the seat warm?
After the seat reaches a comfortable temperature, select LO by pushing the bottom of the switch. This will keep the seat warm.
Which front seats are equipped with seat heaters?
Both front seats are equipped with seat heaters.
Is the passenger seat fully heated?
The passenger seat is only heated in the seat bottom because of the side airbag cutoff system.
What happens if the MAIN switch is OFF?
If the MAIN switch is OFF, the passenger windows cannot be raised or lowered. Keep the MAIN switch off when you have children in the vehicle so they do not injure themselves by operating the windows unintentionally.
How do I open or close a window?
Turn the ignition switch to the ON (II) position to raise or lower any window. To open a window, push the switch down and hold it. Release the switch when you want the window to stop. Pull back on the switch and hold it to close the window.
How do I automatically open or close the driver’s window fully?
To open or close the driver’s window, push or pull the window switch firmly down or up to the second detent, and release it. The window will automatically go down or up all the way. To stop the window, pull or push the window switch briefly.
What happens if the driver’s window senses an obstacle while it is closing automatically?
If the driver’s window senses any obstacle while it is closing automatically, it will reverse direction, and then stop. To close the window, remove the obstacle, then use the window switch again.
When does auto reverse stop sensing when the window is almost closed?
Auto reverse stops sensing when the window is almost closed. Always check that all passengers and objects are away from the window before closing it.
How long will the windows operate after turning off the ignition switch?
The windows will operate for up to 10 minutes after you turn off the ignition switch. Opening either front door cancels this function.
What should I check before closing the windows?
Make sure your passengers are away from the windows before closing them.
How do I operate the moonroof?
Turn the ignition switch to the ON (II) position before operating the moonroof switch on the ceiling console.
How do I fully open the moonroof?
To open the moonroof fully, pull back the moonroof switch firmly. The moonroof opens all the way. To stop the moonroof from opening fully, briefly move the switch in either direction.
How do I tilt the moonroof?
To tilt the moonroof, push the center of the moonroof switch straight up. To stop the moonroof from tilting fully open, push the moonroof switch forward.
How do I partially open or close the moonroof?
To open or close the moonroof partially, pull or push the moonroof switch lightly to the first detent and hold it. The moonroof will stop when you release the switch.
How do I fully close the moonroof?
To close the moonroof fully, push the moonroof switch forward to the second detent, then release it. The moonroof closes all the way. To stop the moonroof from closing all the way, briefly move the switch in either direction.
What should I make sure of before opening or closing the moonroof?
Make sure all hands and fingers are clear of the moonroof before opening or closing it.
Does the moonroof have a key-off delay?
Yes, the moonroof has a key-off delay. The moonroof can be opened and closed for up to 10 minutes after the ignition switch is turned off. The key-off delay cancels as soon as either front door is opened. The ignition switch must then be turned to the ON (II) position for the moonroof to operate.
What happens if the moonroof runs into any obstacle while it is closing automatically?
If the moonroof runs into any obstacle while it is closing automatically, it will reverse direction, and then stop. To close the moonroof, remove the obstacle, then use the moonroof switch again.
When does auto reverse stop sensing when the moonroof is almost closed?
Auto reverse stops sensing when the moonroof is almost closed. Always check that all passengers and objects are away from the moonroof before closing it.
What should I do to ensure the best visibility?
Keep the inside and outside mirrors clean and adjusted for best visibility. Be sure to adjust the mirrors before starting to drive.
How do I reduce glare from headlights behind me?
The inside mirror has day and night positions. The night position reduces glare from headlights behind you. Flip the tab on the bottom edge of the mirror to select the day or night position.
What should I be aware of when trying to open the moonroof in freezing temperatures?
If you try to open the moonroof in below-freezing temperatures, or when it is covered with snow or ice, you can damage the moonroof panel or motor.
How do I adjust the power mirrors?
- Turn the ignition switch to the ON (II) position.
- Move the selector switch to L (driver’s side) or R (passenger’s side).
- Push the appropriate edge of the adjustment switch to move the mirror right, left, up, or down.
- When finished, move the selector switch to the center (off) position. This turns the adjustment switch off to keep the settings.
How do I operate the heated mirrors?
With the ignition switch in the ON (II) position, turn on the heaters by pressing the button. The indicator in the button comes on as a reminder. Press the button again to turn the heaters off.
What else does pressing the heated mirror button do?
Pressing this button also turns the rear window defogger on and off.
What are the three positions for the ceiling light switch?
The ceiling light has a three-position switch: ON (right), Door Activated, and OFF (left).
When does the ceiling light come on in the Door Activated position?
In the Door Activated (center) position, the light comes on when any door is opened, the doors are unlocked with the key or the remote transmitter, or the key is removed from the ignition.
How do I apply the parking brake?
To apply the parking brake, pull the lever up fully.
How do I release the parking brake?
To release it, pull up slightly, push the button, and lower the lever. The parking brake indicator on the instrument panel should go out when the parking brake is fully released.
What happens if I drive with the parking brake applied?
Driving the vehicle with the parking brake applied can damage the rear brakes and hubs. A beeper will sound if the vehicle is driven with the parking brake on.
What happens after all doors are closed tightly?
After all doors are closed tightly, the light(s) dims slightly, then fades out in about 30 seconds.
What happens if I do not open any door after unlocking the driver’s door or removing the key from the ignition switch?
If you do not open any door after unlocking the driver’s door or remove the key from the ignition switch, the light(s) fades out in about 30 seconds.
What happens if I leave any door open without the key in the ignition switch?
If you leave any door open without the key in the ignition switch, the ceiling light(s) will go off after 3 minutes.
How do I operate the spotlights?
Push the spotlight lenses to turn them on and off.
When does the courtesy light between the spotlights come on?
The courtesy light between the spotlights comes on when you turn the parking lights on.
How do I adjust the brightness of the courtesy light?
To adjust its brightness, push the instrument panel brightness control buttons under the driver’s side vent with the ignition switch in the ON (II) position.
What should I be careful of when using the beverage holders?
Be careful when using the beverage holders. A spilled liquid that is very hot can scald you or your passengers. Spilled liquids can damage the upholstery, carpeting, and electrical components in the interior.
How do I open the console compartment?
To open the console compartment, pull up on the lever, and lift the lid.
How do I close the console compartment?
To close, lower the lid, and push it down until it latches.
How do I open the front beverage holder?
Open the front beverage holder by sliding its cover backward.
Where is the rear seat beverage holder located?
The rear seat also has a beverage holder in the center armrest. To use it, pivot the armrest down.
What is the accessory power socket intended for?
This socket is intended to supply power for 12 volt DC accessories that are rated 120 watts or less (10 amps). It will not power an automotive type cigarette lighter element.
What position does the ignition switch need to be in to use an accessory power socket?
To use an accessory power socket, the ignition switch must be in the ACCESSORY (I) or ON (II) position.
Where is the additional accessory power socket located on EX, EX-L, and Si models without a navigation system?
The EX, EX-L, and Si models without navigation system have another accessory power socket in the center console compartment.
What is the combined power rating when using more than one accessory power socket?
When more than one socket is being used, the combined power rating of the accessories should be 120 watts or less (10 amps).
How do I open the glove box?
Open the glove box by pulling the handle to the left.
How do I close the glove box?
Close it with a firm push.
Should I keep the glove box closed while driving?
Always keep the glove box closed while driving.
How do I increase the fan speed and airflow for the ventilation system?
Turn the dial clockwise to increase the fan speed and airflow.
How do I decrease the fan speed and airflow for the ventilation system?
Turn the dial counterclockwise to decrease them.
How do I turn the air conditioning on and off?
This button turns the air conditioning on and off. The indicator in the button is on when the A/C is on.
What happens when the recirculation indicator is on?
When the recirculation indicator is on, air from the vehicle’s interior is sent throughout the system again.
What happens when the recirculation indicator is off?
When the indicator is off, air is brought in from the outside of the vehicle (fresh air mode).
How do I increase the temperature of the airflow?
Turning this dial clockwise increases the temperature of the airflow.
How do I use the mode control buttons?
Use the mode control buttons to select the vents air flows from. Some air will flow from the dashboard corner vents in all modes.
Where does air flow from in the mode?
Air flows from the center and corner vents in the dashboard.
Where does air flow from in the mode?
Airflow is divided between the vents in the dashboard and the floor vents.
Where does air flow from in the mode?
Air flows from the floor vents. When you select , the system automatically switches to fresh air mode.
Where does air flow from in the mode?
Airflow is divided between the floor vents and defroster vents at the base of the windshield.
Where does air flow from in the mode?
Air flows from the defroster vents at the base of the windshield.
What happens automatically when I select or ?
When you select or , the system automatically switches to fresh air mode and turns on the A/C (if equipped).
What happens automatically when I select MAX A/C?
The system automatically turns on the A/C and switches to recirculation mode. Air flows from the center and side vents in the dashboard.
How do I cancel MAX A/C?
Pressing the , A/C, or any of the mode buttons cancels MAX A/C, but the A/C stays on.
How does the ventilation system work?
The ventilation system draws in outside air, circulates it through the interior, then exhausts it through vents near the rear side panels.
How do I ventilate the interior?
- Set the temperature to the lower limit.
- Make sure the A/C is off.
- Select and fresh air mode.
- Set the fan to the desired speed.
How do I use the heater?
- Select.
- Set the fan to the desired speed.
- Adjust the warmth of the air with the temperature control dial.
What should I do if the engine coolant temperature gauge moves near the red zone?
If it moves near the red zone, turn off the A/C until the gauge reading returns to normal.
How do I use the A/C?
- Turn on the A/C by pressing the button. The indicator in the button comes on when a fan speed is selected.
- Make sure the temperature is set to maximum cool.
- Select.
- If the outside air is humid, select recirculation mode. If the outside air is dry, select fresh air mode.
- Set the fan to the desired speed.
How do I cool the interior with MAX A/C?
- Set the fan to the desired speed.
- Select MAX A/C. The system automatically turns on the A/C, selects , and switches to recirculation mode.
- Make sure the temperature is set to maximum cool.
How do I dehumidify the interior?
- Turn the fan on.
- If the A/C is off, turn it on (if equipped).
- Select and fresh air mode.
- Adjust the temperature to your preference.
How do I remove fog from the inside of the windows?
- Set the fan to the desired speed, or high for faster defrosting.
- Select . When you select , the system automatically switches to fresh air mode and turns on the A/C (if equipped). The A/C indicator will not come on if it was previously off.
- Adjust the temperature so the airflow feels warm.
- Select to help clear the rear window.
- To increase airflow to the windshield, close the corner vents.
How do I clear the windows faster?
Close the dashboard corner vents by rotating the wheel next to each vent. This sends more warm air to the windshield defroster vents. Once the windshield is clear, select fresh air mode to avoid fogging the windows.
How do I remove exterior frost or ice from the windows?
- Select. When you select , the system automatically switches to fresh air mode and turns on the A/C (if equipped). The A/C indicator will not come on if it was previously off.
- Select.
- Set the fan and temperature controls to maximum level.
How do I turn the ventilation system off?
Turning the fan speed control dial all the way to the left shuts the system off.
How can I prevent stale air and mustiness from collecting?
To keep stale air and mustiness from collecting, the fan should be running at all times.
What happens when I switch to from or ?
When you switch to , from or , the A/C stays on. To turn the A/C off, press and release the A/C button twice. The indicator in the button comes on and then goes off.
How can I customize the welcome message on the audio system display?
- Make sure the audio system is off.
- Push and hold the TUNE knob, then push the power/volume knob on the audio control panel. The first letter will be blinking.
- Turn the TUNE knob to change a letter.
- Push the top of the SEEK button to select the next segment, then turn the TUNE knob to select a letter. Repeat this procedure to set the message.
The system will return to the audio display about 5 seconds after you stop selecting a letter. You can set up to 16 characters on the display.
How do I turn on the radio and adjust the volume?
The ignition switch must be in the ACCESSORY (I) or the ON (II) position. Turn the system on by pushing the PWR/VOL knob or the AM/FM button. Adjust the volume by turning the same knob.
How do I change bands on the radio?
To change bands, press the AM/FM button.
How do I select a station?
You can use any of five methods to find radio stations on the selected band: tune, seek, scan, the preset buttons, and auto select.
How do I use the TUNE function to select a station?
Use the TUNE knob to tune the radio to a desired frequency. Turn the knob right to tune to a higher frequency, or left to tune to a lower frequency.
How do I use the SEEK function to select a station?
The SEEK function searches up and down from the current frequency to find a station with a strong signal. To activate it, press the or side of the SEEK button, then release it.
How do I use the SCAN function to select a station?
To activate it, press the SCAN button, then release it. SCAN will appear in the display. When the system finds a strong signal, it will stop and play that station for about 10 seconds. If you do nothing, the system will then scan for the next strong station and play it for 10 seconds. When it plays a station you want to listen to, press the SCAN button again.
How do I store a station using the preset buttons?
- Select the desired band, AM or FM. FM1 and FM2 let you store six stations each.
- Use the tune, seek, or scan function to tune the radio to a desired station.
- Pick a preset number (1 – 6), and hold it until you hear a beep.
- Repeat steps 1 through 3 to store a total of six stations on AM and twelve stations on FM.
Each side of the buttons (1 through 6) can store one frequency on AM, and two frequencies on FM.
How do I use the auto select feature?
- Press the A. SEL button.
- ‘‘A.SEL’’ flashes in the display, and the system goes into scan mode for several seconds.
- It stores the frequencies of six AM, and twelve FM stations in the preset buttons.
To turn off auto select, press the A. SEL (auto select) button. This restores the presets you originally set.
How do I adjust the sound?
Press the SOUND (TUNE) knob repeatedly to display the bass (BAS), treble (TRE), fader (FAD), balance (BAL), and speed-sensitive volume compensation (SVC) settings. Each mode is shown in the display as it changes. Turn the SOUND (TUNE) knob to adjust the setting. When the level reaches the center, you will see ‘‘ ’’ in the display. The system will automatically return the display to the selected audio mode about 5 seconds after you stop adjusting a mode.
How do I use the TREBLE/BASS modes?
Use the TREBLE/ BASS modes to adjust the tone.
How do I use the BALANCE/FADER modes?
BALANCE adjusts the side-to-side strength, while FADER adjusts the front-to-back strength.
How do I use the speed-sensitive volume compensation (SVC) mode?
The SVC mode controls the volume based on vehicle speed. The faster you go, the louder the audio volume becomes. As you slow down, the audio volume decreases. The SVC has four modes: SVC OFF, SVC LOW, SVC MID, and SVC HIGH. The default setting is MID. Turn the SOUND (TUNE) knob to adjust the setting.
How do I operate the XM Radio?
- Turn the ignition switch to the ACCESSORY (I) or the ON (II) position.
- Push the PWR/VOL knob to turn on the audio system, and press the AUX button.
- Adjust the volume by turning the knob. The last channel you listened to will show in the display.
How do I change XM Radio channel selections?
Turn the TUNE knob to change channel selections. Turn the knob right for higher numbered channels and left for lower numbered channels. In the category mode, you can only select channels within that category.
How do I switch between channel mode and category mode?
Press and hold the DISP button until the mode changes.
How do I select another category?
Press either side of the SEEK/SKIP button ( or ) to select another category.
How do I activate the XM Radio scan function?
To activate scan, press the SCAN button. The system plays each channel in numerical order for a few seconds, then selects the next channel. When you hear a channel you want to continue listening to, press the button again.
How do I store an XM Radio channel as a preset?
- Use the tune, seek, or scan function to tune to a desired channel.
- In category mode, only channels within that category can be selected. In channel mode, all channels can be selected.
- Pick a preset number you want for that channel. Press and hold the button until you hear a beep.
- Repeat steps 2 and 3 to store the first six channels.
- Press the AUX button again. Store the next six channels using steps 2 and 3.
How do I tune to a stored XM Radio channel?
Once a channel is stored, press and release the proper side of the preset button to tune to it. Press the AUX button. Either XM1 or XM2 will show in the display.
How do I get my radio I.D. number?
To get your radio I.D. number, turn the TUNE knob until ‘‘0’’ appears in the display. Your I.D. will appear in the display.
How do I select the disc player?
To select the disc player, press the CD button. You will see ‘‘CD’’ in the display.
How do I play a disc?
To load or play discs, the ignition switch must be in the ACCESSORY (I) or ON (II) position.
How do I load a disc?
Insert a disc about halfway into the disc slot. The drive will pull the disc in the rest of the way to play it.
What will I see in the display when playing a disc?
The number of the current track and the elapsed time are shown in the display. When playing a disc in MP3 or WMA, the numbers of the current folder and file, and the elapsed time are shown.
How do I display text data on a disc?
Each time you press the DISP button, the display shows you the text data on a disc, if the disc was recorded with text data.
How do I change or select tracks/files?
Use the SEEK/SKIP button while a disc is playing to select passages and change tracks (files in MP3/WMA mode). Each time you press and release the side of the SEEK/SKIP button, the player skips forward to the beginning of the next track (file in MP3 or WMA mode). Press and release the side to skip backward to the beginning of the current track. Press it again to skip to the beginning of the previous track.
How do I move rapidly within a track?
To move rapidly within a track, press and hold the or side of the SEEK/SKIP button.
How do I display the album, artist, and track name?
You can see the album, artist, and track name in the display. If a disc is recorded in MP3 or WMA, you can see the folder and file name, and the album, artist, and track tag. With the folder name, you will see the FOLDER indicator in the display. The TRACK indicator is shown with the file or track name.
How do I see more than 16 characters of text data?
The display shows up to 16 characters of selected text data (the folder name, file name, etc.). If the text data has more than 16 characters, you will see the first 15 characters and the indicator in the display. Press and hold the DISP button until the next 16 characters are shown. You can see up to 31 characters of the text data. If you press and hold the DISP button again, the display shows the first 16 characters again.
How do I select a different folder?
Turn the TUNE knob to move to the beginning of the next folder. Turn the knob to the right to skip to the next folder, and to the left to move to the beginning of the current folder. Turn it again to skip to the beginning of the previous folder. Turning the TUNE knob more than one click skips several folders at a time.
How do I continuously replay a track (files in MP3 or WMA mode)?
Press and release the RPT button. You will see ‘‘RPT’’ in the display. Press and hold the RPT button for 2 seconds to turn it off.
How do I activate folder repeat?
To activate folder repeat, press the RPT button twice. You will hear a beep and see F-RPT in the display. The system continuously replays the current folder. Press the RPT button again to turn it off.
How do I deactivate the repeat feature?
Pressing the RDM button, or selecting a different folder with the TUNE knob also turns off the repeat feature.
How do I activate random play within a disc?
To activate random play, press and release the RDM button. In MP3 or WMA mode, press the RDM button repeatedly to select RDM (within a disc random play). You will see ‘‘RDM’’ in the display. Press the RDM button for 2 seconds to return to normal play.
How do I activate folder random play?
To activate folder random, press and release the RDM button. You will see F-RDM in the display. The system will then select and play files randomly. This continues until you deactivate folder random by pressing and holding the RDM button for 2 seconds, or by selecting a different folder with the TUNE knob.
How do I activate the scan function?
To activate scan, press the SCAN button. In MP3 or WMA mode, press the SCAN button repeatedly to select SCAN. You will see SCAN in the display. You will get a 10 second sampling of each track/ file on the disc. Press and hold the SCAN button again to get out of scan mode and play the last track/file sampled.
How do I turn off the scan feature?
Pressing either side of the SEEK/ SKIP button also turns off the scan feature.
How do I activate folder scan?
To activate folder scan, press the SCAN button twice. You will see F-SCAN in the display. The system plays the first file in the first folder for about 10 seconds. If you do nothing, the system will then play the first files in the next folders for 10 seconds. After playing the first file in the last folder, the system plays normally.
How do I turn off the folder scan?
Pressing either side of the SEEK/ SKIP button, selecting a different folder with the TUNE knob, or pressing the SCAN button, also turns off the folder scan.
How do I stop playing a disc?
Press the eject button ( ) to remove the disc. If you eject the disc, but do not remove it from the slot, the system will automatically reload it after 10 seconds and put it in pause mode. To begin playing, press the CD button.
How do I play the radio when a disc is playing?
Press the AM/FM button. Press the CD button again to switch back to the CD player. Press the AUX button to switch to an appropriate audio unit.
How do I select a different disc in the optional disc changer?
To select a different disc, use the preset 4 (DISC ) or the preset 1 (DISC ) on the preset button. To select the previous disc, press the preset 4 (DISC ), or the preset 1 (DISC ) to select the next disc in sequence.
What happens if I select an empty slot in the magazine?
If you select an empty slot in the magazine, the changer will search for the next available disc to load and play.
What should I do if I see an error message while playing a disc?
Press the eject button. After ejecting the disc, check it for damage or deformation. If there is no damage, insert the disc again.
What should I do if the error message appears again?
Insert a different disc. If the new disc plays, there is a problem with the first disc. If the error message cycle repeats and you cannot clear it, take your vehicle to a dealer.
How do I play an iPod?
To play an iPod, connect it to the USB adapter cable in the console compartment by using your dock connector, then press the AUX button. The ignition switch must be in the ACCESSORY (I) or ON (II) position. The iPod will also be charged with the ignition switch in these positions.
How do I connect an iPod?
- Pull out the USB connector from the holder and remove the cable from the clip in the console compartment.
- Connect your dock connector to the iPod correctly and securely.
- Install the dock connector to the USB adapter cable securely.
How do I display text data for an iPod?
Each time you press the DISP button, the display mode switches between the album name, the song/track name, the artist name, or name off (which turns off the text display). The display shows up to 16 characters of the selected data. If the text data has more than 17 characters, you will see the first 15 characters and the indicator in the display. Press and hold the DISP button until the next 16 characters are shown.
What should I do if the iPod indicator does not appear in the audio display?
Check the connections, and try to reconnect the iPod a few times. If the audio system still does not recognize the iPod, the iPod may need to be reset. Follow the instructions that came with your iPod, or find reset instructions online.
How do I turn the audio system on?
The audio system can be turned on by pushing the power/volume knob or the AM/FM button. Pushing the AUDIO button will also turn on the system.
How do I adjust the volume?
Adjust the volume by turning the power/volume knob.
What are the five methods to find radio stations on the selected band?
The five methods to find radio stations are tune, seek, scan, the preset buttons, and auto select.
How do I tune the radio to a desired frequency?
Use the TUNE bar to tune the radio to a desired frequency. Press the side of the bar to tune to a higher frequency, and press the side to tune to a lower frequency. Press and hold the or side of the TUNE bar until you hear two beeps to change the frequency rapidly. Release the bar when the display reaches the desired frequency.
How do I change bands?
To change bands, press the AM/FM button, or touch the desired band icon (FM1, FM2, AM, XM1, or XM2).
How do I activate the seek function?
To activate the seek function, press and hold the or side of the TUNE bar until you hear a beep, then release it.
How do I activate the scan function?
To activate the scan function, press the SCAN button, then release it. You will see SCAN in the display. When the system finds a strong signal, it will stop and play that station for about 10 seconds.
How do I store a station?
- Use the tune, seek, or scan function to tune the radio to a desired station.
- Pick a preset button, and hold it until you hear a beep.
- Repeat steps 1 through 3 to store a total of six stations on AM and twelve stations on FM.
How do I use the auto select feature?
- Press the AUDIO button to view the audio control icons, then touch the AUTO SEL icon.
- You will see AUTO SEL flashing in the display, and the system goes into scan mode for several seconds.
- It stores the frequencies of six AM, and twelve FM stations in the preset buttons.
How do I turn off auto select?
Press the AUTO SEL icon to restores the presets you originally set.
How do I listen to XM Radio?
To listen to XM Radio, turn the ignition switch to the ACCESSORY (I) or the ON (II) position. Push the power/volume knob to turn on the audio system, and press the XM RADIO button. Adjust the volume by turning the knob. The last channel you listened to will show in the display.
How do I switch to XM Radio from another source?
You can also change to the XM Radio while you are listening to an FM station, AM station, disc, PC card, etc., by touching the XM1 or XM2 icon on the audio display.
How do I switch between channel mode and category mode?
To switch between channel mode and category mode, touch the MODE icon. In channel mode, you can select all of the available channels. In category mode, such as Jazz, Rock, Classical, etc., you can select all of the channels within that category. Each time you touch and release the MODE icon, the display changes between the channel mode and the category mode. In category mode, only channels within that category can be selected. In channel mode, all channels can be selected.
How do I store an XM Radio channel?
- Press the XM RADIO button. Either XM1 or XM2 will show in the display.
- Use the tune, seek, or scan function to tune to a desired channel.
- Pick the preset button (icon) you want for that channel. Press and hold the button (icon) until you hear a beep.
How do I change XM Radio channel selections?
Press the TUNE bar to change channel selections. Press for higher numbered channels and for lower numbered channels. In the category mode, you can only select channels within that category.
How do I activate scan function in XM Radio?
To activate scan, press the SCAN button or touch the SCAN icon on the screen. The system plays each channel in numerical order for a few seconds, then selects the next channel. When you hear a channel you want to listen to, press the button or touch the icon again. The scan function gives you a sampling of all channels while in the channel mode. In the category mode, only the channels within that category are scanned.
How do I select another category?
Press and hold either side of the TUNE bar ( or ) until you hear a beep to select another category.
How do I select a channel from the list?
- Press the AUDIO button to show the audio control display on the navigation screen.
- Touch the CHANNEL LIST icon to switch the display to the channel list which shows all channels in all categories.
- Select and touch a desired channel.
How do I store the first six channels?
- Repeat steps 2 and 3 to store the first six channels.
- Press the XM RADIO button again or touch the other XM icon (XM1 or XM2) on the audio display.
- Store the next six channels using steps 2 and 3.
- Once a channel is stored, press and release the proper preset button (icon) to tune to it.
How do I adjust the sound?
To adjust the sound, push the AUDIO button, then enter the sound grid by touching the SOUND icon on the display.
How do I adjust the left/right balance?
To adjust the left/right balance, touch the L or R icon.
How do I adjust the strength of sound from the subwoofer speaker?
To adjust the sound strength, touch or on each side of the adjustment bar.
How do I adjust the front/rear fader?
To adjust the front/rear fader, touch the FR or RR icon.
How do I adjust the treble and bass?
To adjust the treble and bass, touch either or on the treble or bass adjustment bar.
How do I select the SVC (speed-sensitive volume compensation) mode?
Touch the appropriate icon (Low, Mid, Hi, Off) to select the mode.
How do I adjust the illumination of the audio system?
You can use the instrument panel brightness control buttons to adjust the illumination of the audio system. The audio system illuminates when the parking lights are on, even if the radio is off.
How do I select the background screen to display the sound level?
Each time you touch the background icon, the display changes. There are three screen modes: level (the sound level is shown with the vertical bars), spectrum analysis (the sound level appears as ripples of water), and off.
How do I use the joystick to select the icon?
Move it up and down to move the highlighting and scroll through lists. Select the icon, then move the joystick to left or right to change the setting.
How do I load or play discs?
To load or play discs, the ignition switch must be in the ACCESSORY (I) or ON (II) position.
How do I load a disc?
- The disc player is behind the navigation screen. To use the disc player, press the OPEN button beside the screen. The screen folds back, and the disc player appears.
- Insert a disc about halfway into the disc slot. The drive will pull the disc in the rest of the way and begin to play it.
How do I return the screen to the upright position?
To return the screen to the upright position, press the CLOSE button on the edge of the screen panel.
How do I operate the disc player?
Push the AUDIO button beside the screen to show the audio display and operate the disc player. You can also operate the audio system without using the control icons on the audio screen. Press the CD button. The status bar appears on the bottom of the screen. On the navigation screen, you can see the audio information whenever you touch the AUDIO INFO icon on the lower portion of the screen.
How do I change or select tracks/files?
- Each time you press and release (preset 6), the player skips forward to the beginning of the next track (file in MP3 or WMA mode).
- Press and release (preset 5), to skip backward to the beginning of the current track. Press it again to skip to the beginning of the previous track.
- To move rapidly within a track/file, press and hold (preset 4) or (preset 3).
How do I select a different folder?
To select a different folder, press either side of the TUNE bar to move to the beginning of the next folder. Press the side of the TUNE bar to skip to the next folder, and the side to move to the beginning of the current folder. Press it again to skip to the beginning of the previous folder.
How do I continuously replay a track (file in MP3 or WMA mode)?
To continuously replay a track (file in MP3 or WMA mode), press and release the RPT button (preset 1). You will see TRACK REPEAT in the display. Press and hold the RPT button for 2 seconds to turn it off.
How do I activate folder repeat?
To activate folder repeat, press and hold the RPT button (preset 1). You will see FOLDER REPEAT in the display. The system continuously replays the current folder. Press the RPT button again to turn it off. Pressing the RDM button or selecting a different folder with the TUNE bar also turns off folder repeat.
How do I activate track random?
To activate track random, press and release the RDM button (preset 2). You will see TRACK RANDOM in the display. Press and hold the RDM button for 2 seconds to return to normal play.
How do I activate folder random?
To activate folder random, press the RDM button (preset 2) twice. You will see FOLDER RANDOM in the display. The system then selects and plays files randomly. This continues until you deactivate folder random by pressing the RDM button again, or if you select a different folder with the TUNE bar.
How do I select a track/file directly from a track list on the audio display?
Press the AUDIO button to show the audio display, then touch the Track List icon. The track list menu appears on the display.
How do I activate scan?
To activate scan, press and release the SCAN button. You will see TRACK SCAN in the display. You will get a 10 second sampling of each track/file on the disc. Press and hold the SCAN button for 2 seconds to get out of scan mode and play the last track/ file sampled.
How do I activate folder scan?
To activate folder scan, press and hold the SCAN button. You will see FOLDER SCAN in the display. The system plays the first file in each folder for about 10 seconds. If you do nothing, the system then plays the first file in each folder for 10 seconds each. After playing the first file of the last folder, the system goes to normal play.
How do I remove a disc from the audio unit?
- Fold back the screen by pressing the OPEN button.
- Press the disc eject button ( ) to remove the disc.
What happens if I eject the disc, but do not remove it from the slot?
If you eject the disc, but do not remove it from the slot, the system will automatically reload it after 10 seconds and put it in pause mode. To begin playing, press the CD button.
How do I stop playing a disc?
To return the screen to the upright position, press the CLOSE button.
How do I select the desired track/file by touching the icon on the display?
The selected icon will be highlighted in blue. The system begins to play the selected track/file. With a disc in MP3 or WMA, touch the folder icon on the upper left of the screen to move to the parent folder. The current folder is highlighted in blue.
How do I play the radio when a disc is playing?
To play the radio when a disc is playing, press the AM/FM button or touch the FM1, FM2, AM, XM1, or XM2 icon. If a PC card is in the audio unit, touch the CARD icon to play the PC card. Press the CD button again or touch the CD icon to switch back to the disc player.
How do I select a different disc?
To select a different disc, use either side of the TUNE bar. To select the previous disc, press the side. To select the next disc, press the side.
How do I load or play a card?
To load or play a card, the ignition switch must be in the ACCESSORY (I) or ON (II) position.
How do I load a PC card?
- The PC card slot is behind the navigation screen. To use the PC card player, press the OPEN button beside the screen. The screen folds back, and the PC card slot appears.
- Insert a PC card straight into the slot. The drive will read the PC card and begin to play it.
How do I return the screen to the upright position?
Return the screen to the upright position by pressing the CLOSE button on the edge of the screen panel.
How do I operate the PC card player?
Push the AUDIO button beside the screen to show the audio display and operate the PC card player. You can also operate the audio system without using the control icons on the audio screen. Press any of the appropriate control buttons. The status bar appears on the bottom of the screen. On the navigation screen, you can see the audio information whenever you touch the AUDIO INFO icon on the screen.
How do I select a play mode?
- Touch the PLAY MODE icon, then choose one of the modes by touching its icon.
- When a mode is selected, it is highlighted in blue.
How do I select a play mode using the audio display?
To select a play mode, push the AUDIO button to show the audio display, then touch the PLAY MODE icon on the display.
How do I select a play mode using the joystick?
Select the desired mode by touching the appropriate icon, or move the joystick, then press ENT.
How do I select the desired mode?
- After you select the play mode, the display changes to the selectable playing menu.
- If you select ‘‘Continue playing the current song,’’ the system goes into the selected play mode after playing the current file.
- If you select ‘‘Play a New Track List,’’ the system goes into the selected play mode immediately and begins to play the files in order to the new list.
How do I exit the play mode screens?
To exit the play mode screens, press the AUDIO button.
How do I change or select tracks/files?
- Each time you press and release (preset 6), the player skips forward to the beginning of the next file.
- Press and release (preset 5), to skip backward to the beginning of the current file. Press it again to skip to the beginning of the previous file.
- To move rapidly within a file, press and hold (preset 4) or (preset 3).
How do I select a different folder?
To select a different folder, press either side of the TUNE bar to move to the beginning of the next folder. Press the side of the TUNE bar to skip the next folder, and press the side to move to the beginning of the current folder. Press it again to skip to the beginning of the previous folder.
How do I continuously replay a file?
To continuously replay a file, press and release the RPT button (preset 1). You will see TRACK REPEAT in the display. Press the RPT button again to turn it off.
How do I activate each repeat mode?
To activate each repeat mode, press and hold the RPT button (preset 1) for 2 seconds. You will see FOLDER REPEAT, ARTIST REPEAT or ALBUM REPEAT in the display. The system continuously replays the current folder/artist/album. Press and hold the RPT button for 2 seconds again to turn it off. Pressing the RDM button, or selecting a different folder/artist/album with the TUNE bar also turns off the repeat feature.
How do I activate track random?
To activate track random, press and release the RDM button (preset 2). You will see TRACK RANDOM in the display. Press and hold the RDM button for 2 seconds to return to normal play.
How do I activate each random play?
To activate each random play, press the RDM button (preset 2) 2 times. You will see FOLDER RANDOM, ARTIST RANDOM or ALBUM RANDOM in the display. The system then selects and plays files randomly. This continues until you deactivate each random play by pressing the RDM button again, or you select a different folder/artist/ album with the TUNE bar.
How do I activate scan?
To activate scan, press and release the SCAN button. You will see TRACK SCAN in the display. You will get a 10 second sampling of each file on the PC card. Press and hold the SCAN button for 2 seconds to get out of scan mode and play the last file sampled.
How do I activate each scan feature?
To activate each scan feature, press and hold the SCAN button until you hear a beep. You will see FOLDER SCAN, ARTIST SCAN or ALBUM SCAN in the display. The system plays the first file in the folder for about 10 seconds. If you do nothing, the system plays the first file in each folder, in order, for 10 seconds each. After playing the first file of the last folder/artist/album, the system returns to normal play.
How do I select a file directly from a track list on the audio display?
Press the AUDIO button to show the audio display, then touch the Track List icon. The track list menu appears on the display.
How do I play a file?
Touch its icon on the screen. In folder mode, touch the folder icon on the upper left of the screen to move to the parent folder. The current folder is highlighted in blue.
How do I search a file?
- When you select ‘‘Song Search’’ from the track list display, the song search menu appears.
- You can then select any of three modes to search a file: Title by Keyword, Artist, and Album.
How do I search for a song title by keyword?
In Title by Keyword mode, enter the title name, or any keyword, by touching the letter icons on the screen. Touch the List icon to begin the song search. If you press the CANCEL button on the screen, the display returns to the mode menu without doing a search. To cancel the selected letter, select the letter and touch the Delete icon. To select more characters, touch the More icon. The other character list will be shown.
How do I search for a song by artist name?
Select the Artist icon, and the artist list appears. Select the desired artist, and the artist’s file list is displayed.
How do I search for a song by album name?
Select the Album icon, and the album list appears. Select the desired album, and its song list is displayed. You can then select the desired song from the list.
How do I remove a PC card from the audio unit?
- Fold back the screen by pressing the OPEN button.
- Press the eject button ( ) to remove the card.
How do I stop playing a PC Card?
To return the screen to the upright position, press the CLOSE button.
How do I play the radio when a PC card is playing?
To play the radio when a PC card is playing, press the AM/FM button or touch the FM1, FM2, AM, XM1, or XM2 icon. If a disc is in the audio unit, press the CD button or touch the CD icon to play the disc. Touch the CARD icon to switch back to the PC card player.
How do I play an iPod?
To play an iPod, connect it to the USB adapter cable in the console compartment by using your dock connector. Press the AUDIO button beside the screen to show the audio display and touch the AUX icon. The ignition switch must be in the ACCESSORY (I) or ON (II) position.
How do I connect an iPod?
- Pull out the USB connector from the holder and remove the cable from the clip in the console compartment.
- Connect your dock connector to the iPod correctly and securely.
- Install the dock connector to the USB adapter cable securely.
How do I change or select files in iPod mode?
- Each time you press and release (preset 6), the player skips forward to the beginning of the next file.
- Press and release (preset 5), to skip backward to the beginning of the current file. Press it again to skip to the beginning of the previous file.
- To move rapidly within a file, press and hold (preset 4) or (preset 3).
How do I select a file from the iPod Menu?
- Press the AUDIO button to display the screen, then touch the iPod MENU icon.
- Select the desired mode by touching the appropriate icon, or move the joystick, then press ENT.
- If you select ‘‘ALL’’ on either the artists or albums list, all available files on the selected list are played.
- Press the AUDIO button to go back to the normal audio playing display.
- Pressing the CANCEL button goes back to the previous screen, and pressing the MAP button cancels the audio control display on the screen.
How do I select a file directly from a track list on the audio display?
Press the AUDIO button to show the audio display, then touch the Track List icon. The track list menu appears on the display.
How do I play a file from the track list?
Touch its icon on the screen. The current folder is highlighted in blue.
How do I select repeat or random mode?
You can select any type of repeat and random mode by using the RPT button or RDM button.
How do I activate the repeat feature?
To activate the repeat feature, press the RPT button (Preset 1). You will see ‘‘REPEAT’’ in the display. To turn it off, press the RPT button (Preset 1) again.
How do I activate the track random feature?
To activate the track random feature, press the RDM button (Preset 2). You will see ‘‘TRACK RANDOM’’ in the display. To turn it off, press the RDM button (Preset 2).
How do I activate the album random feature?
To activate the album random feature, press and hold the RDM button (Preset 2). You will see ‘‘ALBUM RANDOM’’ in the display. To turn it off, press and hold the RDM button (Preset 2).
How do I play the radio, disc, or PC card?
- To play the radio, press the AM/FM button or touch the FM1, FM2, AM, XM1, or XM2 icon.
- Press the CD icon to switch to the disc mode (if a disc is loaded). Each time you press the CD button, the audio mode switches between iPod, disc and XM Radio.
- If a PC card is in the audio unit, touch the CARD icon to play the PC card.
How do I stop playing your iPod?
Disconnect the iPod at any time when you see ‘‘OK to disconnect’’ message in the iPod display. Always make sure you see ‘‘OK to disconnect’’ message in the iPod display before you disconnect it. Make sure to follow the iPod’s instructions on how to disconnect the dock connector from the USB adapter cable.
How do I play a USB flash memory device?
To play a USB flash memory device, connect it to the USB adapter cable in the console compartment. The ignition switch must be in the ACCESSORY (I) or ON (II) position. Press the AUDIO button beside the screen to show the audio display and touch the AUX icon.
How do I connect a USB flash memory device?
- Pull out the USB connector from the holder and remove the cable from the clip in the console compartment.
- Connect the USB flash memory device to the USB connector correctly and securely.
How do I select a file directly from a track list on the audio display?
Press the AUDIO button to show the audio display, then touch the Track List icon. The track list menu appears on the display.
How do I play a file from the track list?
Touch its icon on the screen. The current folder is highlighted in blue.
How do I change or select files while playing a USB flash memory device?
- Each time you press and release (preset 6), the player skips forward to the beginning of the next file.
- Press and release (preset 5), to skip backward to the beginning of the current file. Press it again to skip to the beginning of the previous file.
- To move rapidly within a file, press and hold (preset 4) or (preset 3).
How do I select a different folder?
To select a different folder, press either side of the TUNE bar. Press the side to skip to the next folder, and press the side to skip to the beginning of the previous folder.
How do I select repeat, random or scan mode?
You can select any type of repeat, random and scan modes by using the RPT button, RDM button, or SCAN button.
How do I activate the track repeat feature?
To activate the track repeat feature, press the RPT button (Preset 1). You will see ‘‘TRACK REPEAT’’ in the display. To turn it off, press the RPT button (Preset 1).
How do I activate the folder repeat feature?
To activate the folder repeat feature, press and hold the RPT button (Preset 1). You will see ‘‘FOLDER REPEAT’’ in the display. To turn it off, press and hold the RPT button (Preset 1).
How do I activate the track random feature?
To activate the track random feature, press the RDM button (Preset 2). You will see ‘‘TRACK RANDOM’’ in the display. To turn it off, press the RDM button (Preset 2).
How do I activate the folder random feature?
To activate the folder random feature, press and hold the RDM button (Preset 2). You will see ‘‘FOLDER RANDOM’’ in the display. To turn it off, press and hold the RDM button (Preset 2).
How do I activate the track scan feature?
To activate the scan feature, press the SCAN button. You will see ‘‘TRACK SCAN’’ in the display. You will also see the file number blinking. You will get a 10 second sampling of each file in the folder. Press the SCAN button to get out of the scan mode. The system plays the last file sampled.
How do I activate the folder scan feature?
To activate the folder scan feature, press and hold the SCAN button. You will see ‘‘FOLDER SCAN’’ in the display. You will also see the folder number blinking. You will get a 10 second sampling of the first file in each folder. Press the SCAN button to get out of the scan mode. The system plays the last file sampled.
How do I play the radio, disc, or PC card while playing a USB flash memory device?
- To play the radio, press the AM/FM button or touch the FM1, FM2, AM, XM1, or XM2 icon.
- Press the CD icon to switch to the disc mode (if a disc is loaded). Each time you press the CD button, the audio mode switches between the USB, disc and XM Radio.
- If a PC card is in the audio unit, touch the CARD icon to play the PC card.
If you see an error message on the screen while playing a USB flash memory device, what should you do?
Find the solution in the chart. If you cannot clear the error message, take the vehicle to the dealer.
What does it mean when the system cannot read the file(s) when using a USB flash memory device?
Check the files in the USB flash memory device. There is a possibility that the files have been damaged. It could also appear when an unsupported USB flash memory device is inserted or if there is no music information.
What frequencies do the AM and FM bands cover?
The AM band covers 530 to 1,710 kHz, and the FM band covers 87.7 to 107.9 MHz.
What can affect how well the radio receives stations?
How well the radio receives stations is dependent on many factors, such as the distance from the station’s transmitter, nearby large objects, and atmospheric conditions. Driving very near the transmitter of a station that is broadcasting on a frequency close to the frequency of the station being listened to can also affect the radio’s reception.
What happens when you are listening to an AM station and the signal gets weaker?
The sound volume will become weaker, and the station will drift in and out.
What happens when you are listening to an FM station and the signal weakens?
You will see the stereo indicator flickering off and on as the signal weakens. Eventually, the stereo indicator will go off, and the sound will fade completely as you get out of range of the station’s signal.
How far apart are radio stations assigned frequencies on the AM and FM bands?
Radio stations on the AM band are assigned frequencies at least 10 kHz apart (530, 540, 550). Stations on the FM band are assigned frequencies at least 0.2 MHz apart (87.9, 88.1, 88.3).
Why might the sound from the radio distort or flutter while driving in the city?
Radio signals, especially on the FM band, are deflected by large objects such as buildings and hills. The radio then receives both the direct signal from the station’s transmitter and the deflected signal, which causes the sound to distort or flutter. This is a main cause of poor radio reception in city driving.
What atmospheric conditions can affect radio reception?
Atmospheric conditions such as thunderstorms, high humidity, and even sunspots can affect radio reception.
What should you do to protect discs?
When a disc is not being played, store it in its case to protect it from dust and other contamination. To prevent warpage, keep discs out of direct sunlight and extreme heat. Handle a disc by its edges; never touch either surface. Do not place stabilizer rings or labels on the disc.
How should you clean a disc?
To clean a disc, use a clean, soft cloth. Wipe across the disc from the center to the outside edge.
What can cause a disc to not play properly, or possibly jam in the drive?
These, along with contamination from fingerprints, liquids, and felt-tip pens, can cause the disc to not play properly, or possibly jam in the drive.
What should you do when recording a CD-R or CD-RW?
The recording must be closed for it to be used by the system.
What kind of discs should you use when using CD-R or CD-RW discs?
Use only high quality discs labeled for audio use.
What should you not do with the disc player?
Never try to insert foreign objects in the disc player.
What kind of discs should you play?
Play only standard round discs. Odd-shaped discs may jam in the drive or cause other problems.
What should you not use discs with?
Do not use discs with adhesive labels. The label can curl up and cause the disc to jam in the unit.
What kind of discs should you not insert in the disc player?
Do not insert damaged discs as it may become stuck inside and damage the audio unit. Examples of these discs are bubbled, wrinkled, labeled, and excessively thick discs, damaged discs, and poor quality discs.
What may cause the sound to skip?
Scratches and fingerprints on the discs.
What kind of logo do recommended discs have?
Recommended discs are printed with the following logo DIGITAL AUDIO.
What formats may the audio unit not play?
Audio unit may not play the following formats such as 3-inch (8-cm) CD Triangle Shape, Arrow Shape and Can Shape.
How do you activate the seek function using the remote audio controls?
To activate the seek function, press and hold the top ( ) or bottom ( ) of the CH button until you hear a beep. The system searches up or down from the current frequency to find a station with a strong signal.
What happens when you press the top of the CH button when playing a disc?
The system skips to the beginning of the next track (file in MP3 or WMA format) each time the top ( ) of the CH button is pressed.
What happens when you press the bottom of the CH button when playing a disc?
Press the bottom ( ) to return to the beginning of the current track or file. Press it twice to return to the previous track or file.
What does the VOL button do?
The VOL button adjusts the volume up ( ) or down ( ). Press the top or bottom of the button, hold it until the desired volume is reached, then release it.
What does the MODE button do?
The MODE button changes the mode. Pressing the MODE button repeatedly cycles through all possible media sources whether they are present or not. On vehicles without a navigation system, pressing the MODE button repeatedly cycles through all present, connected media sources. Media sources that are not present or connected will not appear when cycling with the MODE button.
What does the CH button do when listening to the radio?
If you are listening to the radio, use the CH button to change stations. Each time you press and release the top ( ) of the button, the system goes to the next preset station on the band you are listening to. Press and release the bottom ( ) to go back to the previous station.
What happens when you are playing a PC card and press the top of the CH button?
Press the top ( ) of the CH button to advance to the next file.
What happens when you are playing a PC card and press the bottom of the CH button?
Press the bottom ( ) to go back to the previous file.
In MP3 or WMA mode, how do you use the seek function to select folders?
Press and hold the top ( ) of the CH button until you hear a beep to skip forward to the first file of the next folder. Press the bottom ( ) to skip backward to the previous folder.
What happens when you are playing a USB flash memory device or iPod with the USB adapter cable (if equipped) and press and release the top of the CH button?
Press and release the top ( ) of the CH button to skip forward to the beginning of the next file.
What happens when you are playing a USB flash memory device or iPod with the USB adapter cable (if equipped) and press the bottom of the CH button?
Press the bottom ( ) to skip backward to the beginning of the current file. Press it twice to return to the previous file.
How do you select a compatible audio unit that is connected to the jack?
When a compatible audio unit is connected to the jack, press the AUX button to select it.
Where is the auxiliary input jack located?
The auxiliary input jack is underneath the accessory power socket on the front panel.
What type of auxiliary input does the system accept?
The system will accept auxiliary input from standard audio accessories using a 1/8 inch (3.5 mm) stereo miniplug.
What happens if the vehicle’s battery is disconnected or goes dead, or the radio fuse is removed?
The audio system will disable itself. If this happens, you will see ‘‘ENTER CODE’’ in the frequency display the next time you turn on the system.
How do you re-enable the audio system after it has been disabled?
Use the preset buttons (icons on vehicles with navigation system) to enter the code. The code is on the radio code card included in your owner’s manual kit. When it is entered correctly, the radio will start playing.
What should you do if you make a mistake entering the code?
If you make a mistake entering the code, do not start over; complete the sequence, then enter the correct code.
How many tries do you have to enter the correct code?
You have 10 tries to enter the correct code. If you are unsuccessful in 10 attempts, you must then leave the system on for 1 hour before trying again.
What should you do if you lose the radio code card?
If you lose the card, you must obtain the code number from a dealer. To do this, you will need the system’s serial number.
Where can you find the audio system’s code and serial numbers?
You should have received a card that lists your audio system’s code and serial numbers. It is best to store this card in a safe place at home. In addition, you should write the audio system’s serial number in the owner’s manual.
How does the radio theft protection feature work?
Your vehicle’s audio system will disable itself if it is disconnected from electrical power for any reason. To make it work again, you must enter a specific 5 digit code using the preset buttons (icon on vehicle’s with navigation system).
How do you set the time on models without a navigation system?
To set the time, press the CLOCK (AM/FM) button until the displayed time begins to blink, then release the button. Press the CLOCK (AM/FM) button again to enter the set time.
How do you quickly set the time to the nearest hour?
If the displayed time is before the half hour, pressing the CLOCK (AM/FM) button until you hear a beep, then pressing the R (preset 3) button sets the clock back to the previous hour. If the displayed time is after the half hour, the clock sets forward to the beginning of the next hour.
How do you change the hours and minutes when setting the clock?
Change the hours by pressing the H (preset 1) button until the numbers advance to the desired time. Change the minutes by pressing the M (preset 2) button until the numbers advance to the desired time.
When does the security system automatically set?
The security system automatically sets 15 seconds after you lock the doors, hood, and trunk.
How do you activate the security system?
For the system to activate, you must lock the doors from the outside with the key, driver’s lock tab, door lock master switch, or remote transmitter. The security system indicator on the instrument panel starts blinking immediately to show you the system is setting itself.
Can you still open the trunk without triggering the alarm after the security system is set?
With the system set, you can still open the trunk with the master key or the remote transmitter without triggering the alarm. The alarm will sound if the trunk lock is forced, or the trunk is opened with the trunk release handle.
What happens if the security system will not set?
The security system will not set if the hood, trunk, or any door is not fully closed. If the system will not set, check the door and trunk open indicators on the instrument panel to see if the doors and trunk are fully closed. Since it is not part of the monitor display, manually check the hood.
How can you check if the system is set after exiting the vehicle?
To see if the system is set after you exit the vehicle, press the LOCK button on the remote transmitter within 5 seconds. If the system is set, the horn will beep once.
What happens when the security system is activated?
The horn sounds and a combination of headlights (low beam), parking lights, side marker lights, and taillights flash if someone attempts to break into your vehicle or remove the radio. This alarm continues for 2 minutes, then it stops.
How do you reset an activated security system before the 2 minutes have elapsed?
To reset an activated system before the 2 minutes have elapsed, unlock the driver’s door with the key or the remote transmitter.
What will cause the alarm to activate once the security system is set?
Once the security system is set, opening any door (without using the key or the remote transmitter), the hood, or the trunk will cause the alarm to activate. It will also activate if the audio unit is removed from the dashboard or the wiring is cut.
How do you engage cruise control?
Push the CRUISE button on the steering wheel. The CRUISE MAIN indicator on the instrument panel comes on. Accelerate to the desired cruising speed above 25 mph (40 km/h). Press and release the SET/ DECEL button on the steering wheel. The CRUISE CONTROL indicator on the instrument panel comes on to show the system is now activated.
When should cruise control be used?
It should be used for cruising on straight, open highways. It is not recommended for city driving, winding roads, slippery roads, heavy rain, or bad weather.
What should you do if your speed increases while going down a hill?
If your speed increases going down a hill, use the brakes to slow down. This will cancel cruise control.
How do you resume the set speed after canceling cruise control?
To resume the set speed, press the RES/ACCEL button. The indicator on the instrument panel will come back on.
How can you increase the set cruising speed?
Press and hold the RES/ACCEL button. When you reach the desired cruising speed, release the button. Push on the accelerator pedal until you reach the desired cruising speed, then press the SET/ DECEL button. To increase the speed in very small amounts, tap the RES/ ACCEL button. Each time you do this, your vehicle will speed up about 1 mph (1.6 km/h).
Can you still use the accelerator pedal to speed up for passing when cruise control is on?
Even with the cruise control turned on, you can still use the accelerator pedal to speed up for passing. After completing the pass, take your foot off the accelerator pedal. The vehicle will return to the set cruising speed.
What causes the cruise control to cancel?
Resting your foot on the brake or clutch pedal.
How can you decrease the set cruising speed?
Tap the brake or clutch pedal lightly with your foot. The CRUISE CONTROL indicator on the instrument panel goes out. When the vehicle slows to the desired speed, press the SET/ DECEL button. Press and hold the SET/DECEL button. Release the button when you reach the desired speed. To slow down in very small amounts, tap the SET/DECEL button. Each time you do this, your vehicle will slow down about 1 mph (1.6 km/h). If you need to decrease your speed quickly, use the brakes as you normally would.
How can you cancel cruise control?
Tap the brake or clutch pedal. Push the CANCEL button on the steering wheel. Push the CRUISE button on the steering wheel.
How do you resume the set speed after canceling cruise control?
When you push the CANCEL button, or tap the brake or clutch pedal, the system will remember the previously set cruising speed. To return to that speed, accelerate to above 25 mph (40 km/h), and then press and release the RES/ACCEL button. The CRUISE CONTROL indicator comes on. The vehicle will accelerate to the same cruising speed as before.
How do you turn the cruise control system off completely?
Pressing the CRUISE button turns the system off and erases the previous cruising speed.
What is HandsFreeLink (HFL)?
HandsFreeLink (HFL) allows you to place and receive phone calls using voice commands, without handling your cell phone.
What do you need to use HFL?
To use HFL, you need a Bluetooth-compatible cell phone.
Where can you find a list of compatible phones, pairing procedures, and special feature capabilities?
In the U.S., visit handsfreelink.honda. com or call (888) 528-7876. In Canada, visit http://www.honda.ca or call (888) 9-HONDA-9.
What do the HFL buttons do?
Press and release the HFL Talk button to give a command or answer a call. Press and release the HFL Back button to end a call, go back to the previous command, or cancel the command.
What may interfere with the microphone?
Air or wind noise from the dashboard and side vents and all windows may interfere with the microphone. Adjust or close them as necessary.
How do you use voice control with HFL?
Press and release the HFL Talk button each time you want to make a command. After the beep, speak in a clear, natural tone. Try to reduce all background noise. Many commands can be spoken together.
What happens when HFL is in use?
When HFL is in use, navigation voice commands cannot be recognized.
How do you change the volume level of HFL?
To change the volume level of HFL, use the audio system volume knob or the steering wheel volume controls.
How can you hear general HFL information, including help on pairing a phone or setting up the system?
Say ‘‘Tutorial’’.
How can you get help at any time, including a list of available commands?
Say ‘‘Hands free help’’.
What information is displayed when there is an incoming call or HFL is in use?
A notification that there is an incoming call, or HFL is in use, will appear on the navigation screen when the audio system is on. On the map screen, you will see a ‘‘HFL’’ message on the screen. The ‘‘ ’’ indicator will be displayed on the audio display when a phone is linked.
How do you use HFL?
Press HFL Talk button each time you give a command.
What commands can you use with HFL?
‘‘Phone Setup,’’ ‘‘Call’’ or ‘‘Dial,’’ ‘‘Pair,’’ ‘‘Edit,’’ ‘‘Delete,’’ ‘‘List,’’ ‘‘Status,’’ ‘‘Next Phone,’’ ‘‘Set Pairing Code,’’ and enter desired phone number. You can also say a name if a phonebook entry is stored.
What other commands can you use with HFL?
‘‘Redial,’’ ‘‘Transfer,’’ ‘‘Mute,’’ ‘‘Send,’’ ‘‘Phonebook,’’ ‘‘Store,’’ ‘‘Edit,’’ ‘‘Delete,’’ ‘‘Receive Contact,’’ ‘‘List,’’ ‘‘Change Language,’’ ‘‘Hands Free Help,’’ ‘‘System Set up,’’ ‘‘Tutorial,’’ ‘‘Clear,’’ ‘‘Auto Transfer,’’ ‘‘Call Notification,’’ ‘‘Security,’’ and ‘‘Change Passcode’’.
How do you pair a phone to the HFL system?
To use HFL, you need to pair your Bluetooth-compatible cell phone to the system. Your phone must be in discovery or search mode to pair. Press and release the HFL Talk button. If you are pairing a phone for the first time, HFL will give you information about the pairing process. Follow the HFL prompts and put your phone in discovery or search mode. HFL will give you a 4-digit pairing code and begin searching for your phone. When your phone finds a Bluetooth device, select HFL from the options and enter the 4-digit code from the previous step. Follow the HFL prompts and name the newly paired phone.
How do you rename a paired phone?
Press and release the HFL Talk button before a command. Say ‘‘Phone setup’’. Say ‘‘Edit’’ after the prompts. If there is more than one phone paired to the system, HFL will ask you which phone’s name you want to change. Follow the HFL prompts and rename the phone.
How do you delete a paired phone?
Press and release the HFL Talk button before a command. Say ‘‘Phone setup’’. Say ‘‘Delete’’ after the prompts. HFL will ask you which phone you want to delete. Follow the HFL prompts to continue with the deletion.
How do you hear the names of all paired phones?
Press and release the HFL Talk button before a command. Say ‘‘Phone setup’’. Say ‘‘List’’ after the prompts. HFL will read out all the paired phone’s names.
How do you hear which paired phone is currently linked?
Press and release the HFL Talk button before a command. Say ‘‘Phone setup’’. Say ‘‘Status’’ after the prompts. HFL will tell you which phone is linked to the system.
How do you change from the currently linked phone to another paired phone?
Press and release the HFL Talk button before a command. Say ‘‘Phone setup’’. Say ‘‘Next phone’’ after the prompts. HFL disconnects the linked phone and searches for another paired phone. Once another phone is found, it is linked to the system. HFL will inform you which phone is now linked. If no other phones are found or paired, HFL will inform you that the original phone is linked again.
How do you change the pairing code setting?
Press and release the HFL Talk button before a command. Say ‘‘Phone setup’’. Say ‘‘Set pairing code’’ after the prompts. If you want HFL to create a random code each time you pair a phone, say ‘‘Random’’. If you want to choose your own 4-digit code to be used each time, say ‘‘Fixed’’ and follow the HFL prompts.
How do you make a call using a phone number?
Press and release the HFL Talk button before a command. Say ‘‘Call’’ or ‘‘Dial’’. Follow the HFL prompts and say the phone number you want to dial. Follow the HFL prompts to confirm the number and say ‘‘Call’’ or ‘‘Dial’’. Once connected, you will hear the person you called through the audio speakers.
How do you make a call using a name in the HFL phonebook?
Press and release the HFL Talk button before a command. Say ‘‘Call’’ or ‘‘Dial’’. Follow the HFL prompts and say the name stored in the HFL phonebook that you want to call. Follow the HFL prompts to confirm the name and make the call.
How do you redial the last number called by HFL?
Press and release the HFL Talk button and say ‘‘Redial’’.
How do you make a call from an imported phonebook?
Press the INFO button, then select ‘‘Cellular Phonebook’’. Select ‘‘Search Imported Phonebook’’. Select a phonebook you want to choose a phone number from. Select the name. All the phone numbers stored for that name will be listed. Select the desired number to call from the list.
How do you search for a specific name in the phonebook?
To search for a specific name in the phonebook, enter the keyword for either the first or last name.
How do you display all names in the phonebook?
To display all names in the phonebook, select the ‘‘List’’ option.
What happens if you select “Store in HandsFreeLink?” Selecting ‘‘Store in HandsFreeLink ,’’ the phone number will be stored in HFL, so that you can call it using HFL’s name tag by voice.
What do you do if your phone has call waiting?
If your phone has Call Waiting, press and release the HFL Talk button to put the original call on hold and answer the incoming call. To return to the original call, press the HFL Talk button again. If you don’t want to answer the incoming call, disregard it and continue with your original call. If you want to hang up the original call and answer the new call, press the HFL Back button.
How do you transfer a call?
Press and release the HFL Talk button and say ‘‘Transfer’’.
How do you receive a call?
When you receive a call, an incoming call notification (if activated) will play and interrupt the audio system if it is on. Press the HFL Talk button to answer the call, or the HFL Back button to hang up.
How do you mute your voice during a call?
To mute your voice during a call, press and release the HFL Talk button and say ‘‘Mute’’.
How do you unmute your voice?
To unmute your voice, press and release the HFL Talk button and say ‘‘Mute’’ again.
How do you send numbers or names during a call?
Press and release the HFL Talk button before a command. Say ‘‘Send’’. Follow the HFL prompts and say the name or number you want to send. Follow the HFL prompts to send the tones and continue the call. To send a pound ( ), say ‘‘pound.’’ To send a star (*), say ‘‘star’’.
How do you edit the number stored in a name?
Press and release the HFL Talk button before a command. Say ‘‘Phonebook’’. Say ‘‘Edit’’ after the prompts. Follow the HFL prompts and say the name entry you want to edit. When asked, say the new number for that name. Follow the HFL prompts to complete the edit.
How do you store a phonebook entry?
Press and release the HFL Talk button before a command. Say ‘‘Phonebook’’. Say ‘‘Store’’ after the prompts. Say a name you want to list as your phonebook entry. Say the number you want to store for the name entry. Follow the HFL prompts and say ‘‘Enter’’ to store the entry.
How do you delete a name?
Press and release the HFL Talk button before a command. Say ‘‘Phonebook’’. Say ‘‘Delete’’ after the prompts. Say the name you want to delete and follow the HFL prompts to complete the deletion.
How do you list all names in the phonebook?
Press and release the HFL Talk button before a command. Say ‘‘Phonebook’’. Say ‘‘List’’ after the prompts. HFL begins reading the names in the order they were stored.
How do you store a specific phone number from your cell phone directly to the HFL phonebook?
Follow the HFL prompts, select a number from your cell phone, and send it to HFL. Say ‘‘Receive contact’’ after the prompts. Follow the HFL prompts and name the number, or say ‘‘Discard’’ if it is not the number you want to store. Follow the HFL prompts if you want to store another number.
How do you import a cellular phonebook?
Select ‘‘Cellular Phonebook ,’’ and HFL will begin importing the phonebook. Select ‘‘OK’’ after the import is completed.
How do you search an imported phonebook?
Select ‘‘Cellular Phonebook ,’’ and a list of imported phonebooks will be displayed. Select a phonebook from the list. Select ‘‘Search Imported Phonebook’’.
How do you select a person from the list?
Select a person from the list. Select the person’s number you want to call, and press the HFL Talk button.
How do you search for a specific name in the phonebook?
To search for a specific name in the phonebook, enter the keyword for either the first or last name.
How do you display all names in the phonebook?
To display all names in the phonebook, select the ‘‘List’’ option.
How do you delete an imported phonebook?
Select ‘‘Cellular Phonebook ,’’ and a list of imported phonebooks will be displayed. Select a phonebook you want to delete. If the phonebook is PIN-protected, you will need to enter the 4-digit PIN number. Select ‘‘Yes OK ,’’ then ‘‘Yes OK ’’ to complete the deletion.
How do you add a PIN?
Select the phonebook you want. The display will change. Enter the new 4-digit PIN. You will have to re-enter the PIN for confirmation.
How do you remove a PIN?
Select the phonebook you want. The display will change. Enter the current PIN for this phonebook. Select ‘‘Do not use PIN ,’’ then select ‘‘Done ’’ after you enter the current PIN.
How do you change the PIN to a new number?
Enter your current PIN. Enter your new PIN number. You will be asked to re-enter the PIN for verification.
How do you set a 4-digit passcode to lock the HFL system for security purposes?
Say ‘‘System Setup’’. Say ‘‘Security’’after the prompts. Follow the HFL prompts and say the 4-digit passcode you want to set. Follow the HFL prompts to confirm the number.
How do you change your security passcode?
Say ‘‘System setup’’. Say ‘‘Change passcode’’ after the prompts. Follow the HFL prompts and say the new 4-digit passcode. Follow the HFL prompts to confirm the number.
How do you select either a ring tone or a prompt as the incoming call notification?
Say ‘‘System setup’’. Say ‘‘Call notification’’ after the prompts. Follow the HFL prompts and say ‘‘Ring tone’’ or ‘‘Prompt’’. You can also say ‘‘Off’’ for no audible incoming call notification.
How do you activate or deactivate the auto transfer function?
Say ‘‘System setup’’. Say ‘‘Auto transfer’’ after the prompts. HFL will let you know if auto transfer is on or off, depending on the previous setting. Follow the HFL prompts to change the setting.
How do you clear the system?
Say ‘‘System setup’’. Say ‘‘Clear’’ after the prompts. Follow the HFL prompts to continue to complete the clearing procedure. You can also clear the system when you have forgotten the passcode and cannot access HFL. When HFL asks you for the passcode, say ‘‘System clear .’’ Paired phones, all names in the HFL phonebook and all imported phonebook data will be lost.
How do you change the system language between English and French?
Say ‘‘Change Language’’. Follow the HFL prompts to change the language to English or French. If you have not named your paired phone in the language you just selected, HFL will ask you to name it in the current language.
How do you quickly change the language?
Follow the HFL prompts. Say the language you want to change to in that language.
What should you avoid during the first 600 miles (1,000 km)?
Avoid full-throttle starts and rapid acceleration. Avoid hard braking for the first 200 miles (300 km). Do not tow a trailer.
When should you change the oil for the first time?
Do not change the oil until the scheduled maintenance time.
What kind of gasoline should you use?
All models except Si: Your vehicle is designed to operate on unleaded gasoline with a pump octane number of 87 or higher. Use of a lower octane gasoline can cause a persistent, heavy, metallic rapping noise that can lead to engine damage. Si model only: Your vehicle is designed to operate on premium unleaded gasoline with a pump octane number of 91 or higher. Use of a lower octane gasoline can cause occasional metallic knocking noises in the engine and will result in decreased engine performance. Use of a gasoline with a pump octane number less than 87 can lead to engine damage.
What kind of gasoline additives are recommended and not recommended?
We recommend using quality gasolines containing detergent additives that help prevent fuel system and engine deposits. In addition, in order to maintain good performance, fuel economy, and emissions control, we strongly recommend, in areas where it is available, the use of gasoline that does NOT contain manganese-based fuel additives such as MMT. Use of gasoline with these additives may adversely affect performance, and cause the malfunction indicator lamp on your instrument panel to come on.
What should you do if the malfunction indicator lamp comes on?
If this happens, contact your authorized dealer for service.
What percentage of ethanol or MTBE can gasoline contain?
Your vehicle is designed to operate on oxygenated gasoline containing up to 10% ethanol by volume and up to 15% MTBE by volume. Do not use gasoline containing methanol.
What could seriously affect the vehicle’s handling, stability, and reliability?
Removing parts from the vehicle or replacing components with non-Honda components.
How can lowering a vehicle with a non-Honda suspension kit cause the airbags to deploy?
Significantly reducing ground clearance can allow the undercarriage to hit speed bumps or other raised objects, which could cause the airbags to deploy.
How can raising a vehicle with a non-Honda suspension kit affect the handling and stability?
Raising a vehicle with a non-Honda suspension kit can affect the handling and stability.
How can larger or smaller wheels and tires affect the vehicle’s systems?
Larger or smaller wheels and tires can interfere with the operation of the vehicle’s antilock brakes and other systems.
What can modifying the steering wheel or other safety features do?
Modifying the steering wheel or any other part of the vehicle’s safety features can make the systems ineffective.
What can non-Honda wheels cause?
Non-Honda wheels, because they are a universal design, can cause excessive stress on suspension components and will not be compatible with the tire pressure monitoring system (TPMS).
What storage areas does the vehicle have?
The vehicle has a glove box, console compartment, trunk (including the rear seats when folded down), center pocket, and door and seat-back pockets.
What can affect the vehicle’s handling, stability, stopping distance, and tires?
Carrying too much cargo or improperly storing it can affect the vehicle’s handling, stability, stopping distance, and tires, and make it unsafe.
What does the figure for determining correct load limit include?
This figure includes the total weight of all occupants, cargo, and accessories, and the tongue load if you are towing a trailer.
Where is the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” located?
The statement is located on the vehicle’s placard.
How do you determine the available amount of cargo and luggage load capacity?
Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs.
What is the maximum load for the U.S. and Canadian vehicle models?
The maximum load for the vehicle is 850 lbs (385 kg) for U.S. models and 395 kg for Canadian models.
Where is the Tire and Loading Information label located?
The Tire and Loading Information label is attached to the driver’s doorjamb.
What can overloading or improper loading affect?
Overloading or improper loading can affect handling and stability and cause a crash in which you can be hurt or killed.
What should you follow when loading cargo?
Follow all load limits and other loading guidelines in this manual.
What should the weight of luggage and cargo not exceed?
That weight may not safely exceed the available cargo and luggage load capacity calculated.
What must the total weight of the vehicle, all occupants, accessories, cargo, and trailer tongue load not exceed?
The total weight must not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR). Both are on a label on the driver’s doorjamb.
What should you do with all items that could be thrown around during a crash?
Store or secure all items that could be thrown around and hurt someone during a crash.
How should you distribute cargo in the trunk?
Distribute cargo evenly on the floor of the trunk, placing the heaviest items on the bottom and as far forward as possible.
What should you do if you carry large items that prevent you from closing the trunk lid?
Follow the instructions on page to avoid the possibility of carbon monoxide poisoning.
What should you do if you fold down the back seat?
Tie down items that could be thrown about the vehicle during a crash or sudden stop.
What should you not put on top of the trunk panel?
Do not put any items on top of the trunk panel because they can block your view and be thrown around the vehicle during a crash.
What should you be sure of when placing items on the floor behind the front seats?
Be sure items placed on the floor behind the front seats cannot roll underneath and interfere with the proper operation of the seats, the sensors under the seats, or the driver’s ability to operate the pedals.
What should you do with the glove box while driving?
Keep the glove box closed while driving. If it is open, a passenger could injure their knees during a crash or sudden stop.
What can driving over a pothole or road debris at too high a speed cause?
Driving over a pothole or road debris at too high a speed can seriously damage a wheel.
What should you do when driving over potholes or road debris?
Slow down under these conditions.
What could curbs and steep inclines damage?
Curbs and steep inclines could damage the front and rear bumpers.
When might the front or rear bumper scrape?
The front or rear bumper may scrape when trying to drive onto an incline, such as a steep driveway or trailer ramps.
What could happen if you drive your vehicle on very rough or rutted roads?
You could damage the suspension and underbody by bottoming out.
What can going too fast over parking lot “speed bumps” cause?
Going too fast over parking lot “speed bumps” can also cause damage.
What should you make sure of before driving?
Make sure all windows, mirrors, and outside lights are clean and unobstructed. Remove frost, snow, or ice. Check that the hood and trunk are fully closed. Check that any items you may be carrying are stored properly or fastened down securely. Check the seat adjustment. Check the adjustment of the inside and outside mirrors. Check the steering wheel adjustment. Make sure the doors are securely closed and locked. Fasten your seat belt. Check that your passengers have fastened their seat belts.
What checks and adjustments should you do every day before you drive your vehicle?
When you start the engine, check the gauges and indicators in the instrument panel. Visually check the tires. If a tire looks low, use a gauge to check its pressure.
How do you start the engine in a vehicle with manual transmission?
Apply the parking brake. In cold weather, turn off all electrical accessories to reduce the drain on the battery. Press the clutch pedal down all the way. The START (III) position does not function unless the clutch pedal is pressed. Without touching the accelerator pedal, turn the ignition key to the START (III) position. Do not hold the key in the START (III) position for more than 15 seconds at a time. If the engine does not start right away, pause for at least 10 seconds before trying again.
How do you start the engine in a vehicle with automatic transmission?
Make sure the shift lever is in Park. Press on the brake pedal. Without touching the accelerator pedal, turn the ignition key to the START (III) position. Do not hold the key in the START (III) position for more than 15 seconds at a time. If the engine does not start right away, pause for at least 10 seconds before trying again.
What should you do when shifting up or down in a manual transmission vehicle?
Make sure you push the clutch pedal down all the way, shift to the next gear, and let the pedal up gradually. When you are not shifting, do not rest your foot on the clutch pedal, as this can cause your clutch to wear out faster.
What should you do before shifting into reverse in a manual transmission vehicle?
Come to a full stop before you shift into reverse. You can damage the transmission by trying to shift into reverse with the vehicle moving. Push down the clutch pedal, and pause for a few seconds before shifting into reverse, or shift into one of the forward gears for a moment. This stops the gears so they won’t “grind”.
What can happen if you inadvertently downshift into the wrong gear?
The engine can be damaged if you inadvertently downshift into the wrong gear (for example, going from third gear at high rpms to second gear instead of upshifting to fourth gear; the engine speed limiter will not work in this situation).
What should you do when slowing down in a manual transmission vehicle?
When slowing down, you can get extra braking from the engine by shifting to a lower gear. This extra braking can help you maintain a safe speed and prevent your brakes from overheating while going down a steep hill. Before downshifting, make sure the engine speed will not go into the tachometer’s red zone in the lower gear.
What should you do if you leave the vehicle parked outside for a long time on a hot day?
Be careful before moving the shift lever because the shift lever may be extremely hot.
What gear should you drive in for good fuel economy and effective emissions control?
Drive in the highest gear that lets the engine run and accelerate smoothly.
What are the recommended shift points for a 5-speed manual transmission?
1st to 2nd: 15 mph (24 km/h) 2nd to 3rd: 27 mph (44 km/h) 3rd to 4th: 39 mph (63 km/h) 4th to 5th: 53 mph (85 km/h)
What are the recommended shift points for a 6-speed manual transmission?
1st to 2nd: 17 mph (27 km/h) 2nd to 3rd: 29 mph (46 km/h) 3rd to 4th: 37 mph (60 km/h) 4th to 5th: 43 mph (69 km/h) 5th to 6th: 49 mph (79 km/h)
What should you do when driving on slippery surfaces?
Use extra care when driving on slippery surfaces because rapid slowing or speeding up can cause loss of control.
What happens if you exceed the maximum speed for the gear you are in?
The engine speed will enter into the tachometer’s red zone. If this occurs, you may feel the engine cut in and out, which is caused by a limiter in the engine’s computer controls. The engine will run normally when you reduce the rpm below the red zone.
What should you do before downshifting?
Make sure the engine will not go into the tachometer’s red zone.
What does the rev limit indicator show?
The rev limit indicator shows you when the engine speed is near the tachometer’s red zone.
What should you do if you cannot shift to reverse when the vehicle is stopped?
Apply the parking brake, and turn the ignition key to the ACCESSORY (I) or LOCK (0) position. With the clutch pedal still pressed, start the engine. Press the clutch pedal, and shift to reverse.
What should you do if you need to use the procedure to shift to reverse?
Have the vehicle checked by your dealer because your vehicle may be developing a problem.
What should you do with the clutch pedal pressed to shift to reverse?
Move the shift lever to the first/second gear side of the neutral gate, then shift to reverse.
How do you shift from Park to any position in an automatic transmission vehicle?
Press the brake pedal, the release button on the front of the shift lever, then pull the lever. You cannot shift out of Park when the ignition switch is in the LOCK (0) or the ACCESSORY (I) position.
What does it indicate if the “D” indicator flashes while driving?
It indicates a possible problem in the transmission.
What should you do if the malfunction indicator lamp comes on along with the “D” indicator?
Avoid rapid acceleration, and have the transmission checked by your dealer as soon as possible because there is a problem with the automatic transmission control system.
How do you shift from P to R in an automatic transmission vehicle?
Press the brake pedal, and press the shift lever release button.
How do you shift from R to P in an automatic transmission vehicle?
Press the shift lever release button.
What does the Park (P) position do?
This position mechanically locks the transmission. Use Park whenever you are turning off or starting the engine.
What must you do to shift out of Park?
You must press on the brake pedal and have your foot off the accelerator pedal. Press the release button on the front of the shift lever to move it.
What should you do to avoid transmission damage?
Come to a complete stop before shifting into Park. You must also press the release button to shift into Park.
When can you remove the key from the ignition switch?
The shift lever must be in Park before you can remove the key from the ignition switch.
How do you shift from Park to reverse?
Press the brake pedal and press the release button.
How do you shift from reverse to neutral?
Come to a complete stop and then shift.
What must you do before shifting into reverse from neutral?
Press the release button.
When should you use Drive (D)?
Use this position for your normal driving. The transmission automatically selects a suitable gear (1 through 5) for your speed and acceleration.
When should you use Neutral (N)?
Use neutral if you need to restart a stalled engine, or if it is necessary to stop briefly with the engine idling. Shift to the Park position if you need to leave your vehicle for any reason.
What should you do when you are moving the shift lever from neutral to another gear?
Press on the brake pedal.
When should you use D3?
Use D3 when towing a trailer in hilly terrain, or to provide engine braking when going down a steep hill. D3 can also keep the transmission from cycling between third, fourth, and fifth gears in stop-and-go driving.
How do you shift to Second (2)?
Press the release button on the front of the shift lever. This position locks the transmission in second gear. It does not downshift to first gear when you come to a stop.
When should you use second gear?
For more power when climbing. To increase engine braking when going down steep hills. For starting out on a slippery surface or in deep snow. To help reduce wheel spin.
How do you shift from second to first?
Press the release button.
What happens if you exceed the maximum speed for the gear you are in an automatic transmission vehicle?
The engine speed will enter into the tachometer’s red zone. If this occurs, you may feel the engine cut in and out. This is caused by a limiter in the engine’s computer controls. The engine will run normally when you reduce the rpm below the red zone.
What should you do if pushing on the brake pedal and pressing the release button does not let you shift the transmission out of Park?
Set the parking brake. Remove the key from the ignition switch. Insert the built-in key into the shift lock release slot. Push down on the key while you press the release button on the shift lever and move the lever out of Park to neutral. Remove the key from the shift lock release slot, then reinstall the cover. Make sure the notch on the cover is on the shift lever side. Return the key to the ignition switch, press the brake pedal, and restart the engine.
What does it mean if you need to use the shift lock release?
It means your vehicle is developing a problem. Have it checked by your dealer.
What should you put on the notch of the shift lock release slot cover to prevent scratches?
Put a cloth on the notch of the shift lock release slot cover to prevent scratches.
What should you do before putting the transmission in Park in an automatic transmission vehicle?
Set the parking brake. This keeps the vehicle from moving and putting pressure on the parking mechanism in the transmission.
What should you make sure of when parking?
Make sure the moonroof (if equipped) and the windows are closed. Place any packages, valuables, etc., in the trunk or take them with you. Turn off the lights. Lock the doors. Always use the parking brake when you park your vehicle.
What should you do if the vehicle is facing uphill when parking?
Turn the front wheels away from the curb. If you have a manual transmission, put it in first gear.
What should you do if the vehicle is facing downhill when parking?
Turn the front wheels toward the curb. If you have a manual transmission, put it in reverse gear.
What should you do before driving away?
Make sure the parking brake is fully released. Driving with the parking brake partially set can overheat or damage the rear brakes.
What could happen if the parking brake is not set firmly?
Your vehicle may roll if it is parked on an incline.
What should you check on vehicles with a security system?
Check the indicator on the instrument panel to verify that the security system is set.
Where should you never park?
Never park over dry leaves, tall grass, or other flammable materials because the hot three way catalytic converter could cause these materials to catch on fire.
What should you do after driving through deep water?
Check the brakes after driving through deep water. Apply the brakes moderately to see if they feel normal. If not, apply them gently and frequently until they do. Be extra cautious in your driving.
What will you hear if the brake pads need replacing?
You will hear a distinctive, metallic screeching sound when you apply the brake pedal.
What happens if you do not have the brake pads replaced?
They will screech all the time.
What is normal for the brakes to do occasionally?
It is normal for the brakes to occasionally squeal or squeak when you apply them.
What should you not do with your foot on the brake pedal?
Resting your foot on the pedal keeps the brakes applied lightly, builds up heat, reduces their effectiveness and reduces brake pad life. In addition, fuel economy can be reduced. It also keeps your brake lights on all the time, confusing drivers behind you.
What should you do when going down a long hill?
Constant application of the brakes when going down a long hill builds up heat and reduces their effectiveness. Use the engine to assist the brakes by taking your foot off the accelerator and downshifting to a lower gear.
What will you feel when the ABS activates?
You will feel a pulsation in the brake pedal when the ABS activates, and you may hear some noise.
How should you steer when braking hard?
Always steer moderately when you are braking hard. Severe or sharp steering wheel movement can still cause your vehicle to veer into oncoming traffic or off the road.
What should you do if the ABS indicator comes on?
The anti-lock function of the braking system has shut down. The brakes still work like a conventional system, but without anti-lock. You should have your dealer inspect your vehicle as soon as possible.
What should you do if the ABS indicator comes on while driving?
Test the brakes.
How should you apply pressure to the brake pedal when letting the ABS work?
Let the ABS work for you by always keeping firm, steady pressure on the brake pedal.
What should you never do with the brake pedal when ABS is engaged?
You should never pump the brake pedal.
What happens if the ABS indicator and the brake system indicator come on together, and the parking brake is fully released?
The EBD system may also be shut down.
What should you do if the ABS indicator and the brake system indicator come on together, and the parking brake is fully released?
Test your brakes. If the brakes feel normal, drive slowly and have your vehicle repaired by your dealer as soon as possible. Avoid sudden hard braking which could cause the rear wheels to lock up and possibly lead to a loss of control.
What does the vehicle stability assist (VSA) system do?
The vehicle stability assist (VSA) system helps to stabilize the vehicle during cornering if the vehicle turns more or less than desired. It also assists you in maintaining traction while accelerating on loose or slippery road surfaces.
What may you notice when VSA activates?
When VSA activates, you may notice that the engine does not respond to the accelerator in the same way it does at other times. There may also be some noise from the VSA hydraulic system. You will also see the VSA activation indicator blink.
What will you see when VSA activates?
When VSA activates, you will see the VSA Activation indicator blinks.
What should you do if the VSA system indicator comes on while driving?
Pull to the side of the road when it is safe, and turn off the engine. Reset the system by restarting the engine. If the VSA system indicator stays on or comes back on while driving, have the VSA system inspected by your dealer.
What happens if the low tire pressure indicator or TPMS indicator comes on?
The VSA system automatically turns on even if the VSA system is turned off by pressing the VSA OFF switch. If this happens, you cannot turn the VSA system off by pressing the VSA OFF switch again.
What happens if the VSA system indicator does not come on when the ignition switch is turned to the ON (II) position?
There may be a problem with the VSA system. Have your dealer inspect your vehicle as soon as possible.
What should you make sure of when replacing tires?
Make sure they are of the same size and type as your original tires.
What should you do if you install winter tires?
Make sure they are the same size as those that were originally supplied with your vehicle. Exercise the same caution during winter driving as you would if your vehicle was not equipped with VSA.
How do you turn the VSA system on and off?
Press and hold the VSA OFF switch until you hear a beep.
What should you do immediately after freeing your vehicle from being stuck?
Be sure to switch the VSA on again. It is not recommended driving your vehicle with the VSA and traction control systems switched off.
When might it be easier to free your vehicle with the VSA temporarily switched off?
In certain unusual conditions when your vehicle gets stuck in shallow mud or fresh snow.
What happens when the VSA system is off?
The traction control system is also off.
When is VSA turned on?
VSA is turned on every time you start the engine, even if you turned it off the last time you drove the vehicle.
What happens when VSA is off?
The VSA activation indicator comes on as a reminder.
How do you turn the system back on?
Press and hold the switch again.
What should you do when the low tire pressure indicator is on?
One or more of your tires is significantly underinflated. You should stop and check your tires as soon as possible, and inflate them to the proper pressure as indicated on the vehicle’s tire information placard.
What should you do if you think you can safely drive a short distance to a service station?
Proceed slowly, and inflate the tire to the recommended pressure shown on the driver’s doorjamb.
What should you do if the tire is flat, or if the tire pressure is too low to continue driving?
Replace the tire with the compact spare tire.
What should you do if you cannot make the low tire pressure indicator go out after inflating the tires to the specified values?
Have your dealer check the system as soon as possible.
When may the low tire pressure indicator come on unexpectedly?
Because tire pressure varies by temperature and other conditions.
What could happen if you check and fill your tires in a warm area, then drive in extremely cold weather?
The tire pressure will be lower than measured and could be underinflated and cause the low tire pressure indicator to come on.
What could happen if you check and adjust your tire pressure in cooler conditions, and drive into extremely hot conditions?
The tire may become overinflated. However, the low tire pressure indicator will not come on if the tires are overinflated.
When you restart the vehicle with the compact spare tire, what may happen?
The TPMS indicator may also come on and stay on after driving several miles (kilometers).
How often should you manually check the tire pressures?
Manually check the tire pressures monthly.
What should each tire be set to?
Each tire, including the spare, should be checked monthly when cold and set to the recommended inflation pressure as specified on the tire information label and in the owner’s manual.
What does it mean if the Tire Pressure Monitoring System (TPMS) Indicator comes on and stays on?
There is a problem with the tire pressure monitoring system.
What happens if there is a problem with the tire pressure monitoring system?
The system will shut off and no longer monitor tire pressures. Have the system checked by your dealer as soon as possible.
What happens after you replace the flat tire with the compact spare tire?
The low tire pressure indicator stays on. This is normal; the system is not monitoring the spare tire pressure. Manually check the spare tire pressure to be sure it is correct. After several miles (kilometers) driving with the compact spare tire, the TPMS indicator comes on and the low tire pressure indicator goes off.
What happens when you replace the spare tire with the specified regular tire equipped with the tire pressure monitor sensor?
The low tire pressure indicator or the TPMS indicator will go off, after several miles (kilometers) driving.
What should you never use in a flat tire?
Never use a puncture-repairing agent in a flat tire. If used, you will have to replace the tire pressure sensor.
What should you do with a flat tire?
Have the flat tire repaired by your dealer as soon as possible.
What is the maximum allowable weight of the trailer and everything in or on it?
The maximum allowable weight of the trailer and everything in or on it must not exceed 1,000 lbs (450 kg). Towing a load that is too heavy can seriously affect your vehicle’s handling and performance and can also damage the engine and drivetrain.
What should the tongue load of a fully-loaded trailer be?
The weight that the tongue of a fully-loaded trailer puts on the hitch should be approximately 10% of the total trailer weight. Too much tongue load reduces front-tire traction and steering control. Too little tongue load can make the trailer unstable and cause it to sway.
How do you achieve a proper tongue load?
Start by loading 60% of the load toward the front of the trailer and 40% toward the rear, then re-adjust the load as needed.
How can you confirm that vehicle and trailer weights are within limits?
The best way to confirm that vehicle and trailer weights are within limits is to have them checked at a public scale.
What should you check the first time you set up a towing combination?
Using a suitable scale or a special tongue load gauge, check the tongue load the first time you set up a towing combination (a fully-loaded vehicle and trailer), then recheck the tongue load whenever the conditions change.
What should you be sure of when using electric brakes?
If you choose electric brakes, be sure they are electronically actuated. Do not attempt to tap into your vehicle’s hydraulic system.
What should you do before installing electric brakes?
See your trailer dealer or rental agency for more information on installing electric brakes.
What should you always use when towing a trailer?
Always use safety chains when you tow a trailer. Make sure the chains are secured to the trailer and hitch, and that they cross under the tongue and can catch the trailer if it becomes unhitched. Leave enough slack to allow the trailer to turn corners easily, but do not let the chains drag on the ground.
What must trailer lights and equipment comply with?
Trailer lights and equipment must comply with federal, state, provincial, territorial, and local regulations. Check with your local trailer dealer or rental agency for the requirements in the area where you plan to tow, and use only equipment designed for your vehicle.
What should you do if you cannot clearly see behind you, or if the trailer creates a blind spot?
Install special mirrors.
Since lighting and wiring vary by trailer type and brand, what should you do?
You should have a qualified technician install a suitable connector between the vehicle and the trailer. Improper equipment or installation can cause damage to your vehicle’s electrical system and affect your vehicle warranty.
What should you check when preparing to tow, and before driving away?
The vehicle has been properly serviced, and the suspension, cooling system, and lights are in good operating condition. All weights and loads are within limits. The hitch, safety chains, and any other attachments are secure. All items in or on the trailer are properly secured and cannot shift while you drive. The lights and brakes on your vehicle and the trailer are working properly. Your vehicle tires and spare are properly inflated, and the trailer tires and spare are inflated as recommended by the trailer maker.
What should you always do when backing up?
Always drive slowly and have someone guide you when backing up. Grip the bottom of the steering wheel, then turn the wheel to the left to get the trailer to move to the left, and turn the wheel right to move the trailer to the right.
What precautions should you follow when parking?
Follow all normal precautions when parking, including firmly setting the parking brake and putting the transmission in Park (automatic) or in 1st or reverse (manual). Also, place wheel chocks at each of the trailer’s tires.
What should you do when being passed by a large vehicle?
Keep a constant speed, and steer straight ahead. Do not try to make quick steering or braking corrections.
How should you make turns when towing a trailer?
Make turns more slowly and wider than normal. The trailer tracks a smaller arc than your vehicle, and it can hit or run over something the vehicle misses.
How should you brake when towing a trailer?
Allow more time and distance for braking. Do not brake or turn suddenly as this could cause the trailer to jackknife or turn over.
What should you do when climbing hills while towing a trailer?
Closely watch your temperature gauge. If it nears the red (Hot) mark, turn the air conditioning off, reduce speed and, if necessary, pull to the side of the road to let the engine cool.
What should you do if the automatic transmission shifts frequently while going up a hill?
Shift to D3.
What should you do if you must stop when facing uphill?
Use the foot brake or parking brake. Do not try to hold the vehicle in place by pressing on the accelerator, as this can cause the automatic transmission to overheat.
What should you do when driving down hills while towing a trailer?
Reduce your speed, and shift down to second gear. Do not “ride” the brakes, and remember, it will take longer to slow down and stop when towing a trailer.
How fast should you drive when towing a trailer?
Drive slower than normal in all driving situations, and obey posted speed limits for vehicles with trailers.
What position should the shift lever be in when towing a trailer on level roads?
If you have an automatic transmission, use the D3 position.
What is the proper shift lever position to use when towing a trailer in hilly terrain?
D3 is the proper shift lever position to use when towing a trailer in hilly terrain.
What should you do before you begin a maintenance task?
Read the instructions before you begin, and make sure you have the tools and skills required.
What should you make sure of before you begin a maintenance task?
Make sure your vehicle is parked on level ground, the parking brake is set, and the engine is off.
What should you use to clean parts?
Use a commercially available degreaser or parts cleaner, not gasoline.
How can you reduce the possibility of fire or explosion?
Keep cigarettes, sparks, and flames away from the battery and all fuel-related parts. Wear eye protection and protective clothing when working with the battery or compressed air.
What should you be sure of when you operate the engine?
Be sure there is adequate ventilation whenever you operate the engine.
What should you let cool down before touching any parts?
Let the engine and exhaust system cool down before touching any parts.
How can you see the current engine oil life?
Turn the ignition switch to the ON (II) position, and press the SEL/ RESET button repeatedly until the engine oil life display appears.
What will you see if the remaining engine oil life is 15 to 6 percent?
You will see the engine oil life indicator every time you turn the ignition switch to the ON (II) position. The maintenance minder indicator will also come on, and the maintenance item code(s) for other scheduled maintenance items needing service will be displayed next to the engine oil life indicator.
How do I check the automatic transmission fluid level?
Park the vehicle on level ground. Start the engine and let it run until the radiator fan comes on, then shut off the engine. Wait about 60 seconds (but no longer than 90 seconds) before proceeding. Remove the dipstick and wipe it with a clean cloth. Insert the dipstick all the way into the transmission securely. Remove the dipstick and check the fluid level. It should be between the upper and lower marks. If the level is below the lower mark, add fluid into the dipstick hole to bring it to the level between the upper and lower marks. Pour the fluid slowly and carefully so you do not spill any, and clean up any spills immediately.
What kind of automatic transmission fluid should I use?
Always use Honda Genuine ATF-Z1 (automatic transmission fluid). Using transmission fluid other than Honda Genuine ATF-Z1 may cause deterioration in transmission operation and durability, and could result in damage to the transmission.
How do I check the manual transmission fluid level?
Check the fluid level with the transmission at normal operating temperature and the vehicle sitting on level ground. Remove the transmission filler bolt, and carefully feel inside the bolt hole with your finger. The fluid level should be up to the edge of the bolt hole. If it is not, add Honda Manual Transmission Fluid (MTF) until it starts to run out of the hole. Reinstall the filler bolt, and tighten it securely.
What should I do if I am not sure how to add manual transmission fluid?
Contact your dealer if you are not sure how to add fluid.
What kind of manual transmission fluid should I use?
Use Honda Manual Transmission Fluid (MTF). If Honda MTF is not available, you may use an SAE 10W-30 or 10W-40 viscosity motor oil with the API Certification Seal that says ‘‘FOR GASOLINE ENGINES’’ as a temporary replacement. However, motor oil does not contain the proper additives, and continued use can cause stiffer shifting. Replace as soon as it is convenient.
When should I have the automatic transmission fluid replaced?
The automatic transmission should be drained and refilled with new fluid when this service is indicated by a maintenance message on the information display.
When should I have the manual transmission fluid replaced?
The manual transmission should be drained and refilled with new fluid when this service is indicated by a maintenance message on the information display.
How do I check the brake fluid level?
The fluid level should be between the MIN and MAX marks on the side of the reservoir. If it is not, add brake fluid to bring it up to that level. Use the same fluid specified for the brake system.
What does a low brake fluid level indicate?
A low fluid level can indicate a leak in the clutch system. Have this system inspected as soon as possible. If the level is at or below the MIN mark, your brake system needs attention. Have the brake system inspected for leaks or worn brake pads.
What kind of brake fluid should I use?
Always use Honda Heavy Duty Brake Fluid DOT 3. If it is not available, you should use only DOT 3 or DOT 4 fluid, from a sealed container, as a temporary replacement. Brake fluid marked DOT 5 is not compatible with your vehicle’s braking system and can cause extensive damage.
Why is it important to use the right kind of brake fluid?
Using any non-Honda brake fluid can cause corrosion and decrease the life of the system. Have the brake system flushed and refilled with Honda Heavy Duty Brake Fluid DOT 3 as soon as possible.
How often should I replace the brake fluid?
Replace the brake fluid according to the time recommendations in the maintenance minder schedule.
How often should I check the brake fluid level?
Check the brake fluid level in the reservoirs monthly.
How do I check the power steering fluid level?
Check the level on the side of the reservoir when the engine is cold. The fluid should be between the UPPER LEVEL and LOWER LEVEL. If not add power steering fluid to the UPPER LEVEL mark.
What does a low power steering fluid level indicate?
A low power steering fluid level can indicate a leak in the system. Check the fluid level frequently, and have the system inspected as soon as possible.
What kind of power steering fluid should I use?
Always use Honda Power Steering Fluid. You may use another power steering fluid as an emergency replacement, but have the power steering system flushed and refilled with Honda PSF as soon as possible.
What should I NOT do with the steering wheel?
Turning the steering wheel to full left or right lock and holding it there can damage the power steering pump.
How should I handle a halogen headlight bulb when replacing it?
When replacing a bulb, handle it by its base, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.
What can happen if oil, perspiration, or a scratch gets on a halogen headlight bulb?
Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.
How do I change the headlight bulb on the driver’s side?
Remove the engine coolant reserve tank by pulling it out of its holder. Start the engine, turn the steering wheel all the way to the right, then turn off the engine. Use a flat-tip screwdriver to remove the two holding clips from the inner fender, and pull the inner fender cover back. Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down. Remove the bulb by turning it one-quarter turn counterclockwise. Insert the new bulb into the hole, and turn it one-quarter turn clockwise to lock it in place. Push the electrical connector back onto the bulb, making sure it is on all the way. Reinstall the inner fender cover. Then reinstall the holding clips, and lock them in place by pushing on their centers. If you replaced a headlight bulb on the driver’s side, reinstall the engine coolant reserve tank. Turn on the headlights to test the new bulb.
How do I change the headlight bulb on the passenger’s side?
To change the bulb on the passenger’s side, turn the steering wheel to the left. Use a flat-tip screwdriver to remove the two holding clips from the inner fender, and pull the inner fender cover back. Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down. Remove the bulb by turning it one-quarter turn counterclockwise. Insert the new bulb into the hole, and turn it one-quarter turn clockwise to lock it in place. Push the electrical connector back onto the bulb, making sure it is on all the way. Reinstall the inner fender cover. Then reinstall the holding clips, and lock them in place by pushing on their centers. Turn on the headlights to test the new bulb.
How do I replace the front side marker/parking/turn signal light bulb?
Open the trunk. Use a flat-tip screwdriver to remove the two holding clips from the inner fender, and pull the inner fender cover back. Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise. Remove the bulb from the socket by pushing the bulb in and turning it counterclockwise until it unlocks. Install the new bulb in the socket. Turn it clockwise to lock it in place. Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place. Reinstall the inner fender cover. Then reinstall the holding clips, and lock them in place by pushing on their centers. Test the lights to make sure the new bulb is working.
How do I replace rear bulbs in fenders?
Open the trunk. Remove the screw from the center of each fastener on the side of the trunk lining. Pull the lining back. Determine which of the four bulbs is burned out: stop/taillight, back-up light, turn signal, or side marker. Remove the socket by turning it one-quarter turn counterclockwise. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. Reinstall the socket into the light assembly by turning it clockwise until it locks. Put the fasteners into the holes on the side of the trunk lining. Reinstall the screws. Reinstall the trunk lining, making sure it is installed under the edge of the trunk seal. Test the lights to make sure the new bulb is working.
How do I replace rear bulbs in the trunk lid (EX-L, Canadian Sport, and Si models)?
Open the trunk. Remove the screw from the center of each fastener on the trunk lid trim. Pull the trim back. Remove the socket from the light assembly by turning it one-quarter turn counter-clockwise. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. Insert the socket back into the light assembly. Turn it clockwise to lock it in place. Reinstall the socket. Turn it clockwise until it locks. Make sure the new bulb is working. Put the fasteners into the holes on the trunk lid trim. Reinstall the screws. Push the trunk lid trim back into position. Test the lights to make sure the new bulb is working.
How do I replace a high-mount brake light bulb?
Open the trunk, and remove the socket from the light assembly by turning it one-quarter turn counter-clockwise. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. Insert the socket back into the light assembly. Turn it clockwise to lock it in place.
How do I replace a fog light bulb (Si model)?
Use a Phillips-head screwdriver to remove the screw, then carefully pull it out of the bumper. Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down. Remove the bulb by turning it one-quarter turn counterclockwise. Install the new bulb, and turn it one-quarter turn clockwise to lock it in place. Push the electrical connector onto the bulb. Make sure it is on all the way. Align the two tabs on the fog light assembly with the holes in the bumper, then push the fog light assembly into place. Tighten the screw securely. Turn on the fog lights to test the new bulb.
How do I clean the seat belts?
Use a soft brush with a mixture of mild soap and warm water to clean them. Do not use bleach, dye, or cleaning solvents. Let the belts air dry before you use the vehicle.
What can cause seat belts to retract slowly and how do I fix it?
Dirt build-up in the loops of the seat belt anchors can cause the belts to retract slowly. Wipe the insides of the loops with a clean cloth dampened in mild soap and warm water or isopropyl alcohol.
When should I have the dust and pollen filter replaced?
Have your dealer replace the filter when this service is indicated by a maintenance message on the information display. It should be replaced every 15,000 miles (24,000 km) if you drive primarily in urban areas that have high concentrations of soot in the air, or if the flow from the heating and cooling system becomes less than usual.
What should I do if I use non-Honda floor mats?
Make sure they fit properly and that they can be used with the floor mat anchors. Do not put additional floor mats on top of the anchored mats.
What should I do if I remove the driver’s floor mat?
If you remove the driver’s floor mat, make sure to re-anchor it when you put it back in your vehicle. The driver’s floor mat that came with your vehicle hooks over the floor mat anchors. This keeps the floor mat from sliding forward and possibly interfering with the pedals.
How should I position the rear floor mats?
Make sure the rear floor mats are properly positioned. If not, the floor mat will interfere with the seat operation and make the front passenger’s weight sensors ineffective.
How often should I check the condition of the wiper blades?
Check the condition of the wiper blades at least every 6 months. Replace them if you find signs of cracking in the rubber, and areas that are getting hard or if they leave streaks and unwiped areas when used.
How do I replace a wiper blade?
Lift the wiper arm off the windshield, raising the driver’s side first, then the passenger’s side. Disconnect the blade assembly from the wiper arm: Put a cloth on the edge of the lock tab to prevent scratches, then push up on the lock tab carefully with a flat-tip screwdriver. Pivot the blade assembly toward the wiper arm until it releases from the wiper arm. Examine the new wiper blades. If they have no plastic or metal reinforcement along the back edge, remove the metal reinforcement strips from the old wiper blade, and install them in the slots along the edge of the new blade. Make sure the three rubber tabs inside the blade fit to each notch of the reinforcement, as shown. Remove the blade from its holder by grabbing the tabbed end of the blade and pulling firmly until the tabs come out of the holder. Place the top of the wiper blade on the end of the blade assembly, and slide the blade onto the assembly in the direction pointed to by the arrow. Slide the wiper blade assembly onto the wiper arm. Push down the lock tab. Make sure the wiper blade assembly locks in place. Lower the wiper arm down against the windshield, the passenger’s side first, then the driver’s side. Make sure the tab on the blade assembly fits in the indent of the wiper blade and the blade is completely installed.
How do I clean the wheels?
Clean the wheels as you would the rest of the exterior. Wash them with the same solution, and rinse them thoroughly.
How do I clean aluminum alloy wheels?
Aluminum alloy wheels have a protective clear-coat that keeps the aluminum from corroding and tarnishing. Cleaning the wheels with harsh chemicals (including some commercial wheel cleaners) or a stiff brush can damage the clear-coat. To clean the wheels, use a mild detergent and a soft brush or sponge.
What should I do to safely operate my vehicle regarding the tires?
To safely operate your vehicle, your tires must be the proper type and size, in good condition with adequate tread, and correctly inflated.
What are the benefits of keeping tires properly inflated?
Keeping the tires properly inflated provides the best combination of handling, tread life, and riding comfort.
What are the effects of underinflated tires?
Underinflated tires wear unevenly, adversely affect handling and fuel economy, and are more likely to fail from being overheated.
What are the effects of overinflated tires?
Overinflated tires can make your vehicle ride more harshly, are more prone to damage from road hazards, and wear unevenly.
How often should I check my tires?
We recommend that you visually check your tires every day. If you think a tire might be low, check it immediately with a tire gauge. Use a gauge to measure the air pressure in each tire at least once a month. Remember to check the spare tire at the same time.
When should I check the air pressures of my tires?
Check the air pressures when the tires are cold. This means the vehicle has been parked for at least 3 hours, or driven less than 1 mile (1.6 km). Add or release air, if needed, to match the recommended cold tire pressures.
What should I do if I check my tire pressures when the tires are hot?
If you check air pressures when the tires are hot (driven for several miles/kilometers), you will see readings 4 to 6 psi (30 to 40 kPa, 0.3 to 0.4 kgf/cm ) higher than the cold readings. This is normal. Do not let air out to match the recommended cold air pressure. The tire will be underinflated.
How can I tell if a pressure loss is due to a tire problem?
You should get your own tire pressure gauge and use it whenever you check your tire pressures. This will make it easier for you to tell if a pressure loss is due to a tire problem and not due to a variation between gauges.
What should I look for when a tire starts losing pressure?
While tubeless tires have some ability to self-seal if they are punctured, you should look closely for punctures if a tire starts losing pressure.
Where can I find the recommended tire pressures and tire sizes?
For convenience, the recommended tire sizes and cold tire pressures are on a label on the driver’s doorjamb.
What should I look for when I examine the tires?
Every time you check inflation, you should also examine the tires for damage, foreign objects, and wear. You should look for: Bumps or bulges in the tread or side of the tire. Replace the tire if you find either of these conditions. Cuts, splits, or cracks in the side of the tire. Replace the tire if you can see fabric or cord. Excessive tread wear.
Is the tire pressure different for high-speed driving?
Tire pressure for high-speed driving is the same as for normal driving. When you return to normal speed driving, be sure to readjust the tire pressure for normal driving. You should wait until the tires are cold before adjusting the tire pressure.
What should I do if I ever drive in a sanctioned competitive event at sustained high speeds (over 118 mph or 190 km/h)?
If you ever drive in a sanctioned competitive event at sustained high speeds (over 118 mph or 190 km/h), be sure to adjust the cold tire pressures as shown in the next column. If you do not, excessive heat can build up and cause sudden tire failure.
When should I replace a tire due to tread wear?
You should replace the tire if you can see three or more tread wear indicators. A tire this worn gives very little traction on wet roads.
How long do tires last?
The service life of your tires is dependent on many factors, including, but not limited to, driving habits, road conditions, vehicle loading, inflation pressure, maintenance history, speed, and environmental conditions (even when the tires are not in use). In addition to your regular inspections and inflation pressure maintenance, it is recommended that you have annual inspections performed once the tires reach five years old. It is also recommended that all tires, including the spare, be removed from service after 10 years from the date of manufacture, regardless of their condition or state of wear.
Where can I find the date of manufacture of my tires?
The last four digits of the TIN (tire identification number) are found on the sidewall of the tire and indicate the date of manufacture.
What are tread wear indicators?
Your tires have wear indicators molded into the tread. When the tread wears down, you will see a 1/2 inch (12.7 mm) wide band across the tread. This shows there is less than 1/16 inch (1.6 mm) of tread left on the tire.
What should I do if I find a tire is worn unevenly?
If you find a tire is worn unevenly, have your dealer check the wheel alignment.
When should I have my tires rebalanced?
A tire should always be rebalanced if it is removed from the wheel. When you have new tires installed, make sure they are balanced. This increases riding comfort and tire life. For best results, have the installer perform a dynamic balance.
How often should I rotate my tires?
To help increase tire life and distribute wear more evenly, rotate the tires according to the maintenance messages displayed on the information display. Move the tires to the positions shown in the chart each time they are rotated. If you purchase directional tires, rotate only front-to-back.
What should I do when the tires are rotated?
When the tires are rotated, make sure the air pressures are checked.
How should I replace my tires?
Replace your tires with radial tires of the same size, load range, speed rating, and maximum cold tire pressure rating (as shown on the tire’s sidewall). It is best to replace all four tires at the same time. If that is not possible or necessary, replace the two front tires or two rear tires as a pair. Replacing just one tire can seriously affect your vehicle’s handling.
What can happen if I mix radial and bias-ply tires on my vehicle?
Mixing radial and bias-ply tires on your vehicle can reduce braking ability, traction, and steering accuracy. Using tires of a different size or construction can cause the ABS and vehicle stability assist system (VSA) to work inconsistently.
What should I do if I ever replace a wheel?
If you ever replace a wheel, make sure that the wheel’s specifications match those of the original wheels. Also be sure you use only TPMS specific wheels (if equipped). If you do not, the tire pressure monitoring system will not work.
What kind of tires should I use?
Always use the size and type of tires recommended in this owner’s manual.
What kind of tires are suitable for winter driving conditions?
Tires marked ‘‘M S’’ or ‘‘All Season’’ on the sidewall have an all-weather tread design suitable for most winter driving conditions. For the best performance in snowy or icy conditions, you should install snow tires or tire chains. They may be required by local laws under certain conditions.
If I mount snow tires on my vehicle, what kind of tires should they be?
If you mount snow tires on your vehicle, make sure they are radial tires of the same size and load range as original tires. Mount snow tires on all four wheels. The traction provided by snow tires on dry roads may be lower than your original tires. Check with the tire dealer for maximum speed recommendations.
When should I mount tire chains on my tires?
Mount tire chains on your tires when required by driving conditions or local laws. Install them only on the front tires.
What should I do when installing cables?
When installing cables, follow the manufacturer’s instructions, and mount them as tight as you can. Make sure they are not contacting the brake lines or suspension. Drive slowly with them installed. If you hear them coming into contact with the body or chassis, stop and investigate. Remove them as soon as you begin driving on cleared roads.
How do I check the condition of the battery?
Check the condition of the battery monthly by looking at the test indicator window. The label on the battery explains the test indicator’s colors. Check the terminals for corrosion (a white or yellowish powder). To remove it, cover the terminals with a solution of baking soda and water. It will bubble up and turn brown. When this stops, wash it off with plain water. Dry off the battery with a cloth or paper towel. Coat the terminals with grease to help prevent further corrosion.
What should I do if I need to connect the battery to a charger?
If you need to connect the battery to a charger, disconnect both cables to prevent damaging your vehicle’s electrical system. Always disconnect the negative (–) cable first, and reconnect it last.
What happens if my vehicle’s battery is disconnected, or goes dead?
If your vehicle’s battery is disconnected, or goes dead, the audio system will disable itself. The next time you turn on the radio, you may see ‘‘ENTER CODE’’ in the frequency display. Use the preset buttons to enter the code. The navigation system will also disable itself. The next time you turn on the ignition switch, the system will require you to enter a PIN before it can be used. Refer to the navigation system manual. If your vehicle’s battery is disconnected, or goes dead, the time setting will be reset to 1:00. To set the time again, follow the setting procedure.
What should I do to prepare my vehicle for storage?
Fill the fuel tank. Block the rear wheels. If the vehicle is to be stored for a longer period, it should be supported on jackstands so the tires are off the ground. If you need to park your vehicle for an extended period (more than 1 month), there are several things you should do to prepare it for storage. Proper preparation helps prevent deterioration and makes it easier to get your vehicle back on the road. If possible, store your vehicle indoors. Leave one window open slightly (if the vehicle is being stored indoors). Cover the vehicle with a ‘‘breathable’’ cover, one made from a porous material such as cotton. Non-porous materials, such as plastic sheeting, trap moisture, which can damage the paint. To minimize sticking, apply a silicone spray lubricant to all door and trunk seals. Also, apply a vehicle body wax to the painted surfaces that mate with the door and trunk seals. Support the front wiper blade arms with a folded towel or rag so they do not touch the windshield. Disconnect the battery. If possible, periodically run the engine until it reaches full operating temperature (the cooling fan cycles twice). Preferably, do this once a month. Wash and dry the exterior completely. Clean the interior. Make sure the carpeting, floor mats, etc., are completely dry. Leave the parking brake off. Put the transmission in reverse (manual) or Park (automatic).
What should I do if I have a flat tire while driving?
If you have a flat tire while driving, stop in a safe place to change it. Drive slowly along the shoulder until you get to an exit or an area to stop that is far away from the traffic lanes.
How do I change a flat tire?
Turn on the hazard warning lights, and turn the ignition switch to the LOCK (0) position. Have all passengers get out of the vehicle while you change the tire. Park the vehicle on firm, level, and non-slippery ground. Put the transmission in Park (automatic) or reverse (manual). Apply the parking brake. Open the trunk. Raise the trunk floor by lifting up on the back edge. Take the tool case out of the spare tire. Unscrew the wing bolt, and take the spare tire out of its well. Loosen each wheel nut 1/2 turn with the wheel nut wrench.Remove the center cap from the wheel with the extension. Place the jack under the jacking point. Turn the end bracket clockwise until the top of the jack contacts the jacking point. Make sure the jacking point tab is resting in the jack notch. Use the extension and the wheel nut wrench as shown to raise the vehicle until the flat tire is off the ground. Remove the wheel nuts, then remove the flat tire. Handle the wheel nuts carefully; they may be hot from driving. Place the flat tire on the ground with the outside surface facing up. Before mounting the spare tire, wipe any dirt off the mounting surface of the wheel and hub with a clean cloth. Wipe the hub carefully; it may be hot from driving. Put on the spare tire. Put the wheel nuts back on finger-tight, then tighten them in a crisscross pattern with the wheel nut wrench until the wheel is firmly against the hub. Do not try to tighten the wheel nuts fully. Lower the vehicle to the ground, and remove the jack. Tighten the wheel nuts securely in the same crisscross pattern. Have the wheel nut torque checked at the nearest automotive service facility. Tighten the wheel nuts to 80 lbf·ft (108 N·m , 11 kgf·m). Place the flat tire face down in the spare tire well. Remove the spacer cone from the wing bolt, turn it over, and put it back on the bolt. Secure the flat tire by screwing the wing bolt back into its hole. Store the jack and tools in the tool case. Place the tool case in the center of the flat tire. Lower the trunk floor, and close the trunk lid. Store the wheel cover or center cap in the trunk. Make sure it does not get scratched or damaged.
What should I do after changing a flat tire?
The compact spare tire is smaller than a standard tire, and it will affect the vehicle’s handling. Drive cautiously when the spare is mounted on your vehicle. The vehicle can easily roll off the jack, seriously injuring anyone underneath. Follow the directions for changing a tire exactly, and never get under the vehicle when it is supported only by the jack.
What should I do if the engine won’t start?
Diagnosing why the engine won’t start falls into two areas, depending on what you hear when you turn the ignition switch to the START (III) position:
- You hear nothing, or almost nothing. The engine’s starter motor does not operate at all, or operates very slowly.
- You can hear the starter motor operating normally, or the starter motor sounds like it is spinning faster than normal, but the engine does not start up and run.
What should I check if you hear nothing, or almost nothing when trying to start the engine?
When you turn the ignition switch to the START (III) position, you do not hear the normal noise of the engine trying to start. You may hear a clicking sound, a series of clicks, or nothing at all. Check the transmission interlock. If you have a manual transmission, the clutch pedal must be pushed all the way to the floor or the starter will not operate. With an automatic transmission, it must be in Park or neutral. Turn the ignition switch to the ON (II) position. Turn on the headlights, and check their brightness. If the headlights are very dim or do not come on at all, the battery is discharged. Turn the ignition switch to the START (III) position. If the headlights do not dim, check the condition of the fuses. If the fuses are OK, there is probably something wrong with the electrical circuit for the ignition switch or starter motor. You will need a qualified technician to determine the problem.
What should I check if the starter motor operates normally, or the starter motor sounds like it is spinning faster than normal, but the engine does not start up and run?
Do you have fuel? Check the fuel gauge; the low fuel indicator may not be working. There may be an electrical problem, such as no power to the fuel pump. Check all the fuses. Are you using a properly coded key? An improperly coded key will cause the immobilizer system indicator in the instrument panel to blink rapidly. Are you using the proper starting procedure?
What should I do if the headlights dim noticeably or go out when I try to start the engine?
If the headlights dim noticeably or go out when you try to start the engine, either the battery is discharged or the connections are corroded. Check the condition of the battery and terminal connections. You can then try jump starting the vehicle from a booster battery.
How do I jump start my vehicle?
Although this seems like a simple procedure, you should take several precautions. The numbers in the illustrations show you the order to connect the jumper cables. Turn off all the electrical accessories: heater, A/C, audio system, lights, etc. Put the transmission in neutral (manual) or Park (automatic), and set the parking brake. Open the hood, and check the physical condition of the battery. In very cold weather, check the condition of the electrolyte. If it seems slushy or frozen, do not try jump starting until it thaws. Connect one jumper cable to the positive (+) terminal on your battery. Connect the other end to the positive (+) terminal on the booster battery. Connect the second jumper cable to the negative (–) terminal on the booster battery. Connect the other end to the grounding strap as shown. Do not connect this jumper cable to any other part of the engine. If the booster battery is in another vehicle, have an assistant start that vehicle and run it at a fast idle. Start the vehicle. If the starter motor still operates slowly, check that the jumper cables have good metal-to-metal contact. Once your vehicle is running, disconnect the negative cable from your vehicle, then from the booster battery. Disconnect the positive cable from your vehicle, then from the booster battery.
CLICK HERE TO DOWNLOAD HONDA CIVIC 2010 (01) PDF MANUAL