Free English HOMEMATIC HMIP-HAP2 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD HOMEMATIC HMIP-HAP2 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What is the function of the HOMEMATIC HMIP-HAP2?
The HOMEMATIC HMIP-HAP2 is the central element of the Homematic IP smart home system and communicates with the Homematic IP radio protocol.
All devices of the system can be configured and controlled comfortably and individually with a smartphone via the Homematic IP app. The scope of functions varies depending on the number of components in your system.
What are the important notices and instructions for the HOMEMATIC HMIP-HAP2?
Read the manual carefully and keep it in a safe place.
Attention! This indicates a hazard.
Additional important information.
What are the technical specifications of the HOMEMATIC HMIP-HAP2?
| Device short name | HmIP-HAP2 |
| Supply voltage | 5 VDC // 5 VCC |
| Plug-in mains adapter (input) | 100 V-240 V/50 Hz |
| Power consumption plug-in mains adapter max. | 2.5 W // 2.5 W |
| Standby power consumption | < 1 W |
| Current consumption | max. 500 mA // 500 mA maxi. |
| Degree of protection | IP20 |
| Degree of pollution | 2 |
| Ambient temperature | 5 to 35 °C |
| Dimensions (W x H x D) | 104 x 104 x 40 mm |
| Weight | 165 g |
| Radio frequency | 868.0-868.6 MHz/869.4-869.65 MHz |
| Receiver category | SRD category 2 |
| Maximum radiated power | 10 dBm |
| Typical open area RF range | 300 m |
| Display | Status LED, emergency |
| Network | 10/100 MBit/s | Auto-MDIX |
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD HOMEMATIC HMIP-HAP2 (01) PDF DOCUMENT