HALO HUB-LINK (01) PDF DOCUMENT

Please read instructions carefully and utilize the proper precautions before operating this equipment. Your safety is important.

General Use & Safety:

When used correctly, lithium-ion rechargeable batteries provide a safe and dependable source of portable power. However, if they are misused or abused, this may result in leakage, burns, fire or explosion, causing personal injury or damage to other devices.

Misusing or incorrectly connecting this product may cause electric shock to users and damage equipment.

Do not operate in explosive atmospheres such as in the presence of flammable liquids, gases or dust.

Keep away from moisture and corrosive materials. Do not use near water or wet areas such as bathtubs, showers, bathrooms, sinks, swimming pools or basements.

Do not expose this product to moisture, water, rain, or snow.

Keep away from heat sources. This includes open flames, radiators, and stove ovens.

The lithium-ion rechargeable battery used in this charging device may present a risk of fire or chemical burn if mistreated.

Do not expose to fire or excessive temperature. Do not expose to heat above 140°F (60°C).

In the unlikely event of leakage or explosion use sand or a chemical fire extinguisher. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

This product may become warm under extended high-power operation. Do not cover, wrap, or otherwise restrict this product during operation.

Do not disassemble this product. There are no user-serviceable parts inside. Incorrect reassembly may result in shock or fire hazard.

Do not drop or subject to strong impacts. Do not operate this product if it has received a sharp blow or has otherwise been damaged in any way.

Do not puncture, crush, or subject to mechanical shock.

Only charge this product by the specified method. Use of an attachment not recommended or sold by the manufacturer may result in a risk of fire, electric shock, or injury to persons.

Do not operate this product with a damaged cord or plug, or a damaged output cable.

This product, along with its accessories, are not toys and should be kept away from children.

To reduce risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the power pack.

Do not insert any foreign object into the ports or openings of this product.

When charging the internal battery, work in a well-ventilated area and do not restrict ventilation in any way.

WARNING: IF THE POWER BANK OVERHEATS, BECOMES SWOLLEN, OR IS DEFORMED IN ANY WAY, IMMEDIATELY STOP USING THE PRODUCT AND CONTACT CUSTOMER SERVICE.

Product Maintenance:

Regularly check all ports and wall chargers for any debris, dirt, damage, and corrosion.

Do not disassemble the device.

Do not cover the device with towels, clothes, or other items.

Equipment Cleaning:

Please make sure that the device is disconnected from all input power and output devices.

Wipe with a clean, dry cloth.

Do not use corrosive cleaners or solvents.

Do not insert metal objects into the ports to clean them as this could cause electrical shock. Blow any debris out with canned air.

Disposal/Recycling:

Do not put the device and its accessories in the trash can. Items must be properly handled in accordance with local laws and regulations.

The HALO HUB-LINK power bank includes the following components:

01: Integrated USB-C Cable

02: LCD Display

03: Power ON/OFF Button

04: Integrated iPhone® Cable

05: USB-C Bidirectional Port

06: USB-A Output Port

07: USB-C to USB-C Charging Cable (Included accessory)

08: Adjustable Wrist Strap

IMPORTANT: Fully charge the power bank before using it for the first time. When not being used, store in a cool, dry place.

CHARGING THE POWER BANK:

To charge your HALO HUB-LINK, use the included USB-C to USB-C cable with a wall adapter (not included) that is rated for 5V/3A.

The digital screen will display the current power level while it is charging.

The estimated charging time is up to 3 hours via USB-C.

To charge your devices, you can use either of the integrated charging cables (USB-C or iPhone®) or the USB-A or USB-C ports.

When using the USB ports, it is recommended to use the USB charging cables provided by your device manufacturer.

NOTE: Output is rated for up to 15W for integrated cables and USB-A/USB-C ports.

To adjust the wrist strap, simply slide the retention bead in or out to lengthen or shorten the USB-C cable loop.

If your HALO HUB-LINK is not charging items or charging them slowly, the potential cause could be that the cable or device may not be compatible, or too many items may be plugged in at once. Try charging fewer devices, or using the original cable for that device.

If the HALO HUB-LINK does not appear to charge items (i.e., the Power ON/OFF Button or LCD Display does not turn on), the unit may need to be charged. Use the supplied cable to connect the power bank to a USB power source.

If the power bank seems to discharge too quickly, it might be because too many items are charging at once. To resolve this, try charging fewer devices simultaneously.

If your HALO HUB-LINK does not appear to recharge (but the LCD Display still turns on when the Power ON/OFF Button is pressed), the charging cable or USB source may not be compatible. Try charging with the supplied cable or from a different USB source.

The E1 ERROR CODE indicates that the over-temperature protection has been triggered. The unit will not charge or discharge in cold/hot environments. To fix this, move the unit to a room temperature environment for at least an hour and try again.

The E2 ERROR CODE can appear in two situations:

1. When attempting to charge the unit: This means the input over-voltage protection has been triggered. Try using a different USB-C adapter when charging.

2. When attempting to charge a device: This means the output over-current protection has been triggered. Try plugging in fewer devices.

Battery Type	Lithium-ion
Capacity	5000mAh 3.7V, 18.5Wh
USB-C Input	10W Max (5V/2A)
Outputs	USB-C Cable (>3.6V = 5V/3A) (<3.6V = 5V/2.4A) iPhone Cable (5V/2.4A) USB-C Port (>3.6V = 5V/3A) (<3.6V = 5V/2.4A) USB-A Port (5V/2.4A)
Operating Temperature	Charge: 50°-104°F (10°-40°C) Discharge: 14°-104°F (-10°-40°C)
Storage Temperature	32°-113°F (0°-45°C)
Dimensions	3.91 x 3.11 x 0.72 in. (99.31 x 78.99 x 18.28 mm)
Weight	0.33lb (150g)