AZATOM HOME HUB Q (01) PDF MANUAL

AZATOM HOME HUB Q (01) PDF SUMMARY:

How do I install the batteries?

1. Open the batteries compartment.
2. Install two AAA batteries (not supplied).
3. Close the battery compartment.

---

What is the general operation of the Home Hub Q?

You can use all the functions on the top of the unit or the remote control after connecting to power supply (called Standby Mode).

---

How do I turn on the system?

Press the ON/OFF button to turn the system on from standby mode. Press ON/OFF/SOURCE to select different functions. When turning the system on, the unit will start in the same mode as it was in when it was switched off.

---

How do I turn off the system?

Press and hold the ON/OFF button on the unit or press the button on the remote control again to turn the system off and go to standby mode. The unit will automatically revert to Standby Mode when not in use for 15 minutes unless in FM mode. Be sure to unplug the power cord from the outlet when the system is not in use for an extended period of time.

---

How do I set the time?

1. In standby mode, press and hold the CLOCK button for some seconds, hour indicator will blink.
2. Set the hour with the ▲ button or ▼ button.
3. Press the CLOCK button to confirm, minute indicator will blink.
4. Repeat steps 2-3 to set the minutes, day, month and year. In standby mode, press and hold the CLOCK button for 3 seconds, then press the ►|| button to select 12 / 24 hour format.

---

How do I set the alarm timer?

1. Ensure that you have set the clock correctly.
2. Press ▲/▼ on the remote control to select an alarm sound source: FM tuner or buzzer.
3. Press ALARM 1 or ALARM 2. The hour digits will begin to blink.
4. Press ▲/▼ repeatedly to set the hour.
5. Press ALARM 1 or ALARM 2. The minute digits begin to blink.
6. Repeat steps 5-6 to set the minute.
7. Repeat steps 5-6 to select whether the alarm will ring for the whole week, on weekdays, or at the weekend.
8. Repeat steps 5-6 to set the alarm volume.

---

How do I connect the power?

Connect the AC power cord to the wall socket.

---

How do I use the USB charge socket?

Connect a USB cable (not supplied) to the USB socket to charge your smartphone or tablet PC.

---

How do I use Qi (wireless charging)?

This function only works with mobile devices that support Qi technology.

1. To prevent the displacement of mobile devices, please put anti-slip mat first.
2. Make sure your mobile devices are aligned to the Home Hub Q’s charging area.

---

How do I synchronize the clock?

1. In the STANDBY mode, press and hold the SNOOZE button on the remote control for few seconds, then the unit will enter the CLOCK SYNC mode.

2. Press ▲/▼ on the remote control or on the unit to switch the clock synchronization modes:

   • RDS Only synchronize with the RDS radio station.
   • OFF Turn off the clock synchronization function, only adjust the clock manually.

3. Then press the button on remote control or on the main unit to confirm.

---

How do I activate and deactivate the alarm timer?

Press ALARM 1 or ALARM 2 to activate or deactivate the timer.

• If the timer is activated, [AL1] or [AL2] is displayed.
• If the timer is deactivated, [AL1] or [AL2] disappears.

---

How do I repeat the alarm?

You can press to adjust the interval to repeat alarm. When the alarm rings, press SNOOZE/ DIMMER. The alarm repeats ringing 9 minutes later.

---

How do I stop the alarm ring?

When the alarm rings, press the corresponding ALARM 1 or ALARM 2. The alarm stops but the alarm settings remain.

---

How do I view the alarm settings?

Press ALARM 1 or ALARM 2 to view the alarm settings.

---

How do I set the sleep timer?

This unit can switch to standby automatically after a set period of time.

1. Press SLEEP repeatedly to select a set period of time (in minutes).

   • When the sleep timer is activated, the display will show, the volume will gradually decrease before the unit powers off.

2. Press SLEEP repeatedly until [OFF] is displayed.

   • When the sleep timer is deactivated, disappears on the display.

---

How do I adjust the display brightness?

Press DIMMER repeatedly to select different levels of display brightness.

---

How do I adjust the volume level?

During play, press the VOL+/- buttons to increase/decrease the volume level.

---

How do I select a preset sound effect?

During play, press the EQ button repeatedly to select: [FLAT], [Pop], [Classic], [Rock], [Jazz].

---

How do I mute the sound?

During play press the MUTE button to mute or restore sound. Press this button again to cancel the effect.

---

How do I pair Bluetooth-enabled devices manually?

The first time you connect your Bluetooth device to this player, you need to pair your device to this player.

1. Turn on the Bluetooth function on your device.
2. Switch player’s source to Bluetooth, Display panel shows “BT”, then shows “NO BT” (if no Bluetooth device is connected).
3. Press the or PAIR on remote control or on the Home Hub Q for a few seconds to activate Bluetooth pairing mode, display panel shows “PAIR”.
4. Search for Bluetooth device with your device.
5. Select “Home Hub Q” in the pairing list.
6. If prompted, enter default password “0000”, when the pairing succeeds the display panel shows “BT” again.
7. To disconnect connection, turn off the Bluetooth function on your device or switch the player to another source.

---

How do I control music from my Bluetooth device?

• If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to the music stored on the device through the player.
• If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the player’s remote control to play music stored on the device.

1. Pair your device with the player.

2. Start to play music via your device (if it supports A2DP)

3. Use supplied remote control to control play (if it supports AVRCP)

   • To pause/resume play, press the ►|| button.
   • To skip to a track, press the |◄ ◄ / ► ► | buttons.

---

How do I play from an external audio device?

You can listen to an external audio device through this unit.

1. Ensure that the unit is connected to the TV or audio device.

   • Connect the 3.5mm audio cable to the LINE IN socket on the rear of unit and to the headphone socket on the audio player.

2. Press the ON/OFF/SOURCE button on the main unit repeatedly or the LINE IN button on the remote control to select the LINE source.

3. Start to play on the audio player.

4. Press the VOL +/– buttons on remote control or on the main unit to adjust the volume to your desired level.

---

How do I tune in a station on the FM radio?

1. Press the FM button to select the FM source.
2. Press and hold the buttons, the frequency changes down or up automatically until a station is found.
3. Press buttons repeatedly until you find the station you want.

---

How do I program radio stations automatically?

Press and hold the PROG button for 2 seconds to activate automatic programming. All available stations are programmed in the order of waveband reception strength. The first programed radio station is played automatically.

---

How do I program radio stations manually?

1. Tune in the desired station, then press the PROG button.
2. Press the ▲/▼ buttons on the remote control to select a preset number.
3. Press the PROG button to store the station.
4. Repeat above steps 1 to 3 for each station you want to store in memory with a preset number.

---

How do I tune to a preset radio station?

Press the ▲ or ▼ buttons to select a preset number that you want.

---

What do I do if there is no power?

• Ensure that the AC cord of the apparatus is connected properly.
• Ensure that there is power at the AC outlet.
• Press ON/OFF button to turn the unit on.

---

What do I do if the remote control does not work?

• Before you press any function button, first select the correct source.
• Reduce the distance between the remote control and the unit.
• Insert the battery with its polarities (+/-) aligned as indicated.
• Replace the battery.
• Aim the remote control directly at the sensor on the front of the unit.

---

What do I do if there is no response from the unit?

Disconnect and reconnect the AC power plug, then turn on the unit again.

---

What do I do if there is poor radio reception?

• Increase the distance between the unit and your TV or VCR.
• Fully extend the FM antenna.
• Connect an outdoor FM antenna instead.

---

What do I do if the timer does not work?

• Set the clock correctly.
• Switch on the timer.

---

What do I do if the clock/timer setting erased?

• Power has been interrupted or the power cord has been disconnected.
• Reset the clock/timer.

---

What do I do if I can’t find the Bluetooth name of this unit on my Bluetooth device for Bluetooth pairing?

• Ensure that the unit is switch on.
• Ensure that the Bluetooth function is activated on your Bluetooth device.