Free English GAMEMAX F45 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD GAMEMAX F45 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the components included in the package for the GAMEMAX F45?
The package content for the GAMEMAX F45 includes the following items:
| Image | Q’ty | Used for |
| A | 14 | MB Screw |
| B | 4 | PSU Screw |
| C | 8 | 3.5″ HDD Screws |
| D | 8 | 2.5″ SSD Screws |
| E | 14 | Hard Drive Damper |
| F | 1 | Hex Wrench |
| G | 5 | Motherboard Standoff |
| H | 6 | Cable Tie |
How are the connectors labeled on the GAMEMAX F45 for Combo Audio and Power SW?
For the Combo Audio connector on the GAMEMAX F45, the pins are labeled: PORT 1L, PORT 1R, PORT 2R, PORT 2L, AUG GND, PRESENCE, SENSE1_R, and SENSE2_R.
For the POWER SW connector on the GAMEMAX F45, the pins are labeled with POWER SW on both sides of the connection.
What are the pin labels for the USB3.0 connector on the GAMEMAX F45?
The pin labels for the USB3.0 connector on the GAMEMAX F45 are VBUS, SSRX1-, SSRX1+, GND, SSTX1-, SSTX1+, GND, D1-, D1+, NC, VBUS, SSRX2-, SSRX2+, GND, SSTX2-, SSTX2+, GND, D2-, and D2+.
What are the pin labels for the Type C Gen2 connector on the GAMEMAX F45?
The pin labels for the Type C Gen2 connector on the GAMEMAX F45 are A1, A2, A3, A4, A5, A6, A7, A8, A9, A10, A11, A12, B1, B2, B3, B4, B5, B7, B8, B9, B10, B11, and B12. Specific labels include: A1/GND, A2/TX1+, A3/TX1-, A4/VBUS, A5/CC, A6/D+, A7/D-, A8/SBU1, A9/VBUS, A10/RX2-, A11/RX2+, A12/GND, B1/GND, B2/TX2+, B3/TX2-, B4/VBUS, B5/VCONN, B7/GND, B8/SBU2, B9/VBUS, B10/RX1-, B11/RX1+, B12/GND.
What components are visible on the I/O Panel of the GAMEMAX F45?
The I/O Panel of the GAMEMAX F45 includes the following visible components:
- USB 3.0 (two ports)
- Type-C Gen2 (one port)
- Combo Audio (one jack)
- Power SW (one button)
What are the numbered parts in the Exploded View of the GAMEMAX F45?
The numbered parts in the Exploded View of the GAMEMAX F45 are:
| Number | Part Name |
| 1 | Front Panel |
| 2 | Left side panel |
| 3 | Right side panel |
| 4 | Chassis |
| 5 | Detachable bottom plate |
| 6 | GPU Card Holder |
| 7 | IO Component |
| 8 | Front 120mm fan x3 (included) |
| 9 | Rear 120mm fan x1 (included) |
What is the procedure to start the installation process for the GAMEMAX F45 case?
To begin the installation process for the GAMEMAX F45 case:
Step 1. Remove the left and right side panels and the bottom plate.
How do I remove the front panel on the GAMEMAX F45 case?
To remove the front panel on the GAMEMAX F45 case, simply pull it off. If a fan has been pre-installed in the front, there is no need to remove the panel.
What is the first step for installing hardware inside the GAMEMAX F45 after opening the case?
The first step for hardware installation in the GAMEMAX F45 case is to insert the PSU from the right side and secure it with screws (Item B).
How is the motherboard installed in the GAMEMAX F45?
To install the motherboard in the GAMEMAX F45:
Step 1. Put in the motherboard.
Step 2. Place the I/O baffle.
Step 3. Lock the screws (Item A).
What is the procedure to install a graphics card in the GAMEMAX F45 after preparing the PCI-E area?
The procedure to install a graphics card in the GAMEMAX F45 involves:
Step 1. Open the magnetic PCI-E baffle.
Step 2. Remove the PCI-E interface card, put it in the graphics card, and lock the screw fixation.
How are SSDs and HDDs secured using lock-free screws in the GAMEMAX F45?
To secure SSDs and HDDs with lock-free screws in the GAMEMAX F45:
For SSDs, use the screws labeled D.
For 3.5″ HDDs, use the screws labeled C.
Where can 3.5″ HDDs and 2.5″ SSDs be installed in the GAMEMAX F45 chassis?
The GAMEMAX F45 supports the installation of 3.5″ HDDs and 2.5″ SSDs in multiple locations:
3.5″ HDDs can be installed in bays near the motherboard standoffs and at the bottom plate.
2.5″ SSDs can be installed in bays near the motherboard standoffs and at the bottom plate, as well as on the side behind the motherboard tray area.
What is the cooling consideration if a 3.5-inch hard drive is installed at the bottom of the GAMEMAX F45?
If a 3.5-inch hard drive is installed at the bottom of the GAMEMAX F45, only 2 x 120mm fans or 1 x 140mm fan can be installed in that area for cooling.
What are the fan cooling system specifications supported by the GAMEMAX F45?
The fan cooling system specifications supported by the GAMEMAX F45 are:
- Front: 3 x 120mm fans (included), 2 x 140mm fans (included)
- Bottom: 3 x 120mm or 2 x 140mm (optional)
- Rear: 1 x 120mm fan (included)
What are the liquid cooling system specifications supported by the GAMEMAX F45?
The liquid cooling system specifications supported by the GAMEMAX F45 are:
- Front: 120mm, 240mm, 280mm, or 360mm radiators (optional)
- Rear: 120mm radiator (optional)
What should users pay attention to regarding airflow direction inside the GAMEMAX F45 chassis?
Users should pay attention to the airflow direction inside the GAMEMAX F45 chassis. The illustration shows air intake arrows from the front and bottom, and exhaust arrows from the rear and top/side (depending on fan placement).
How should the PWM ARGB HUB in the GAMEMAX F45 be powered and connected to the motherboard/case controls?
To connect the PWM ARGB HUB in the GAMEMAX F45:
Step 1. Connect the SATA Power input to the hub.
Step 2. Connect the Link LED SW or RESET Button to the corresponding header on the hub for manual ARGB control.
Step 3. Connect the 5V 3pin AURA Cable to the ARGB motherboard header if synchronizing with the motherboard.
Step 4. Connect the PWM TEMP Cable to the CPU Fan socket on the motherboard.
Step 5. Connect the CPU Cooler Fan to the Link 1st PWM Port (Red) on the hub.
What warning is associated with the power connection on the PWM ARGB HUB of the GAMEMAX F45?
A warning indicates: Please do not plug in the wrong power interface, otherwise it will burn out equipment!
What are the functions of the remote control buttons for the PWM ARGB HUB in the GAMEMAX F45?
The functions of the remote control buttons for the PWM ARGB HUB in the GAMEMAX F45 include:
- Automatic Mode Cycle (MB/AUTO button)
- Power off (Off button)
- ON/MB SYNC (On/MB button)
- Mode + (M+ button)
- Static Brightness + (S+ button)
- Fan Speed + (M+ button while Fan Speed is active)
- Fan Speed – (M- button while Fan Speed is active)
- Static Brightness – (S- button)
- Mode – (M- button)
- Static Color Button (direct color selection buttons)
- Double click 10 times for PassCode/PairCode (activates pairing mode). PairCode results in quick flash 3 times. PassCode results in slow flash 3 times.
- Double click 10 times (again) for RGB sequence adjustment: Press the red key until the red, Press the greey key until the green, Press OFF key to save.
CLICK HERE TO DOWNLOAD GAMEMAX F45 (01) PDF DOCUMENT