Free English GAMEMAX GCR09 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD GAMEMAX GCR09 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What parts are included in the assembly package for the GAMEMAX GCR09?
The following parts are included for the assembly of the GAMEMAX GCR09:
| Part ID | Quantity | Description |
|---|---|---|
| A | 5 | Casters/Wheels |
| B | 1 | Star Base |
| C | 1 | Gas Lift |
| D | 1 | Gas Lift Cover |
| E | 1 | Seat Mechanism |
| F | 1 | Seat Cushion |
| G | 1 | Backrest |
| H | 1 | Bracket/Cover |
| I | 1 | Lumbar Cushion |
| J | 1 | Headrest Cushion |
| K | 1 | Side Cap |
| L | 12 | Screws |
| N | 2 | Side Covers |
| O | 1 | Allen Wrench/Tool |
| P | 4 | Washers |
How do I assemble the base and wheels of the GAMEMAX GCR09?
Follow these steps to assemble the base:
1. Locate the Star Base (Part B) and the five Wheels (Part A).
2. Insert each Wheel (Part A) firmly into the sockets on the legs of the Star Base (Part B) as indicated in Step 1.
3. Insert the Gas Lift (Part C) into the center hole of the Star Base. Place the Gas Lift Cover (Part D) over the Gas Lift as shown in Step 2.
How do I attach the seat mechanism to the GAMEMAX GCR09?
Referencing assembly Step 3:
1. Place the Seat Cushion (Part F) upside down.
2. Align the Seat Mechanism (Part E) with the mounting holes on the bottom of the seat.
3. Secure the mechanism using the Screws (Part L). Tighten them with the provided tool.
How do I assemble the backrest and side covers on the GAMEMAX GCR09?
According to assembly Steps 4 and 6:
1. Attach the Backrest (Part G) to the seat assembly brackets.
2. Locate the Side Covers (Part N).
3. Place the Side Covers (Part N) over the metal hinges on the side of the chair.
4. Secure the covers using Screws (Part L) as detailed in the diagram circle in Step 6.
5. Insert the Cap (Part K) to cover the screw hole.
How do I install the cushions on the GAMEMAX GCR09?
Based on assembly Step 5:
1. Attach the Lumbar Cushion (Part I) to the lower portion of the backrest.
2. Attach the Headrest Cushion (Part J) to the upper portion of the backrest.
How do I operate the recline feature on the GAMEMAX GCR09?
As shown in diagrams 7 and 8, the chair features a recline function. Use the lever located on the side mechanism (installed in Step 3) to adjust the angle of the backrest. Diagram 8 depicts the chair in a fully reclined position.
CLICK HERE TO DOWNLOAD GAMEMAX GCR09 (01) PDF DOCUMENT