FENDER X TEUFEL ROCKSTER NEO (01) PDF Document

The scope of delivery for the FENDER X TEUFEL ROCKSTER NEO includes:

• Portable Bluetooth® speaker with mains connection and lithium battery

• Power cord

To power and charge your FENDER X TEUFEL ROCKSTER NEO, follow these steps:

Step 1. Open the cover on the back panel of the speaker.

Step 2. Connect the included power cord to the power input socket on the speaker.

Step 3. Plug the other end of the power cord into a mains power outlet.

The LED lights on the control panel indicate the charging progress. The feedback is as follows:

• One light blinking: 0 – 25% charged

• One solid light, second light blinking: 26 – 50% charged

• Two solid lights, third light blinking: 51 – 75% charged

• Three solid lights, fourth light blinking: 76 – 99% charged

• Four solid lights: 100% charged

To establish a Bluetooth connection, follow these steps:

Step 1. On your smartphone, open the settings and enable Bluetooth.

Step 2. On the FENDER X TEUFEL ROCKSTER NEO, press and hold the Bluetooth button for 1.5 seconds to activate pairing mode.

Step 3. On your smartphone, search for available Bluetooth devices and select “FXT ROCKSTER NEO” from the list to connect.

You can control playback and volume using the buttons on the top panel of the speaker or from your connected Bluetooth device.

Volume: Press the – (minus) button to decrease the volume or the + (plus) button to increase the volume.

Track Control:

• To skip to the previous track, triple tap the previous track button (K◄).

• To skip to the next track, triple tap the next track button (►H).

The FENDER X TEUFEL ROCKSTER NEO features two special sound modes that can be activated using the mode button (icon with a tree).

• Outdoormode: Press and hold the mode button for 0.5 seconds to activate. This mode is optimized for outdoor listening.

• Ecomode: Press and hold the mode button for 4 seconds to activate. This mode helps to conserve battery power.

Yes, the Teufel Go App is available for the FENDER X TEUFEL ROCKSTER NEO. You can download it from the Apple App Store for iOS devices or the Google Play Store for Android devices to access additional features and controls.

To link two speakers wirelessly to play the same audio (mono), follow these steps:

Step 1. Connect your audio source (e.g., smartphone) via Bluetooth to one speaker. This will be the “Broadcaster”. Ensure the second speaker (the “Receiver”) is not connected to any device.

Step 2. On the Broadcaster speaker, press and hold the Party Link button for 1.5 seconds.

Step 3. On the Receiver speaker, press and hold the Party Link button for 1.5 seconds.

The speakers will connect, and both will play the audio from the Broadcaster.

To create a wireless stereo setup (Left and Right channels) with two speakers, use the Party Link Stereo function:

Step 1. Connect your audio source via Bluetooth to one speaker (the “Broadcaster”).

Step 2. On the Broadcaster speaker, double-tap the Party Link button. The button’s light will turn yellow.

Step 3. On the second speaker (the “Receiver”), double-tap the Party Link button. Its light will also turn yellow.

The speakers are now linked in stereo mode, with one acting as the Left channel and the other as the Right channel.

To connect two speakers with a cable for synchronized playback, follow these instructions:

Step 1. Connect your audio source via Bluetooth to the first speaker (the “Master”). On this Master speaker, triple-tap the Party Link button.

Step 2. Connect an XLR cable from the “LINE / COMPANION OUT” port on the Master speaker to the “INPUT 1” port on the second speaker (the “Companion”).

Step 3. On the Companion speaker, ensure the switch for INPUT 1 is set to “LINE”.

Step 4. On the Master speaker, you can toggle the Party Link button to select the audio mode for the wired output: Master, Left, Right, or Mono.

The rear panel has inputs for microphones and instruments.

To connect a microphone:

1. Plug your microphone into the “INPUT 1” socket.

2. Set the selector switch next to the input to “MIC”.

3. Use the corresponding rotary knob to adjust the microphone volume.

To connect an instrument (e.g., guitar):

1. Plug your instrument into the “INPUT 2” socket.

2. Set the selector switch next to the input to “INSTR”.

3. Use the corresponding rotary knob to adjust the instrument volume.

To use the power bank feature, certain conditions must be met:

1. The FENDER X TEUFEL ROCKSTER NEO must be powered ON.

2. The speaker’s battery level must be greater than 30%.

If these conditions are met, you can connect your device’s charging cable to the USB port labeled “POWERBANK 5V 2A” on the back of the speaker to begin charging.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.