Post questions, comments, reviews or page errors in the comment box below.

Click here to download AAXA TECHNOLOGIES P300 NEO (01) PDF MANUAL


PDF Content Summary:

****** Page 1 ****** aaxa TECHNOLOGIES p 200 rojector User Guide

****** Page 2 ****** Caution! WARNING: Please use this product as instructed. Misuse may cause injury or death. DO NOT use while driving DO NOT expose to water or wet surfaces. Electric shock may occur DO NOT expose the projected LED image to your eyes or the eyes of others DO NOT block or restrict airflow from ventilation holes as this may cause the projector to overheat Keep the projector, battery, or charger away from any heat sources Caution for Battery Use • Do not pierce or puncture the battery with sharp objects • Do not heat the product or expose it to high temperature. • Do not wet it or place it in any liquid Caution for Headphone Use • Prolonged use at high volume may impair your hearing. • High volume during walking or driving may cause distractions and result in injury or death

****** Page 3 ****** Table of Contents Chapter 1: P300 Neo at a Glance P300 Neo Introduction I Remote & Touchpad 2 Accessories 3 Chapter 2: Getting Started Powering On / Off 4 Focus Adjustment / Throw Distance • 5 External Inputs/Outputs 6 Connecting to a Computer VGA’ 7 Connecting to a Digital Input • 9 Connecting to Composite Video • ’11 Connecting to Digital Input Video• •13 Connecting to Speakers or Headphones • 15 Connecting a TF Card Connecting a USB Stick Chapter 3: Menu Screens Main Menu Video Player Menu • Photo Viewer Menu Music Player Menu Text Viewer Menu Chapter 4: Setup Menu Settings Keystone Feature Chapter 5: Technical Details Troubleshooting Specifications Notes 16 18 21 22 26 30 33 34 39 41 43 44

****** Page 4 ****** P300 Neo at a Main Unit Front/Back Focus Adjustment DC Port Headphone Out AV Port Digital Input Port Glance Note: Boost Mode can only be used for 1 hour. Chapter 1 Touchpad Power Switch Mini-VGA Port TF Card Slot USB Port 1

****** Page 5 ****** Remote & Touchpad Power On/Off – -t : 00 Home Main Menu Navigation ooo Volume Down — eoe oo Remote — Source Menu Volume Up Media Player Menu Navigation Back Menu Exi Back Both the touchpad and remote can be used to navigate through the menus. The Main Menu Navigation on the remote functions exactly the same as the directional pad on the P300 Neo unit. NOTE: Pressing power on the remote will only put the projector in STANDB Y mode. Toggle the “ON/OFF” switch on the side of the projector to hilly tum the projector off. 2

****** Page 6 ****** Accessories eoe ooe Remote Power Adapter A/V Cable VGA Cable (sold separately) Tripod Note: VGA Adapter Cable sold separately *Under various circumstances, the actual accessories may be different from those shown in the pictures above. Additional accessories are available for purchase at aaxatech.com 3

****** Page 7 ****** Getting Started Powering ON the projector 1. Connect the power cord to the P300 Neo. Chapter 2 2. Connect the other end of the power cord into the wall power source. 3. Toggle the On / Off switch on the side of the projector to the “ON” position the projector should automatically turn on. Powering OFF the projector 1. To turn off the projector, toggle the “Power Switch” to the “OFF” position. This will fully turn off the projector. 4

****** Page 8 ****** FOCUS Adjusment / Throw Distance Focus Adjustment Spin the focus wheel up or down until the image becomes clear. Throw Distance Chart row Istance Units: Inches 19 29 38 48 57 67 76 86 Throw Ratio 1.2 lagona Ize Units: Inches 20 30 40 50 60 70 80 90 Projection Angle: 100% Offset *minimum throw distance: 10 inches 0/ 4 GOV 16:9As ect Ratio 5

****** Page 9 ****** External Inputs and Outputs Headphones/speakers Composite Cable Digital Input Mini-VGA TF Card USB Stick

****** Page 10 ****** Connecting to a Computer via VGA Step 1: Connect one end of the VGA Cable to your computer’s VGAAdapter. step 2: Connect the other end of the VGA Cable to your P300 Neo’s VGA port. Step 3: In the Main Menu, select the “Inputs” icon and then the Select “INPUT” icon Note: VGA Adapter Cable sold separately Select “VGA’ “VGA” Icon. INPUT icon 7

****** Page 11 ****** Connecting to a Computer Cont. Step 4: Enabling VGA on your Computer — To enable VGA output on your computer, most computers require “turning on” the video output feature. Each computer is different. Please consult your owner’s manual for instructions to enable VGA output. Below are standard instructions for a Win- dows 10 computer — not all systems are the same. step 5: -4. Press Windows+P to toggle through display settings. Select either “Duplicate” or “Extend” de- pending on your viewing option *NOTE: different operating sys- tems may differ step 6: Bees Related settings 1. Right click on computer desktop and select “Screen Resolution” 2. Display Properties window will pop up 3. If a secondary monitor is grayed out, click on it and se- lect ttExtend these displays” in the “Multiple Displays” drop down 4. If the image is blurry or the text is not legible, adjust the screen resolution. We recommend 1280×720 8

****** Page 12 ****** Connecting to a Computer via Digital Input Step 1: Connect one end of the Digital Input Cable to your computer’s Digital Input Adapter. Step 2: Connect the other end of the Digital Input Cable to your P300 Neo’s Digital Input port. step 3: In the Main Menu, select the “Inputs” icon and then the “Digital Input” Icon. INPUT Select “INPUT” icon Select “DIGITAL INPUT” icon 9

****** Page 13 ****** Connecting to a Computer Cont. Step 4: Enabling Digital Video output on your Computer — To enable Digital Video output on your computer most computers require “turning on” the video output feature. Each computer is different. Please consult your owner’s manual for instructions to enable Digital Video output. Below are standard instructions for a Windows 10 computer— not all systems are the same. Step 5: Press Windows+P to toggle through display settings. Select either ttDuplicatei’ or ttExtend’J de- pending on your viewing option *NOTE: different operating sys- tems may differ step 6: Related settings 1. Right click on computer desktop and select “Screen Resolution” 2. Display Properties window will pop up 3. If a secondary monitor is grayed out, click on it and se- lect “Extend these displays” in the “Multiple Displays” drop down 4. Ifthe image is blurry or the text is not legible, adjust the screen resolution. We recommend 1280×720 10

****** Page 14 ****** Connecting to Composite Video Step 1: Connect the 3.5mm Composite AV Cable to the back of the P300 Neo. step 2: Connect the composite end of the AV Cable (Red, White, Yellow) to your device. 11

****** Page 15 ****** Connecting to Composite Video Cont. Step 3: In the Main Menu HOME 10. INPUT .7 Select “INPUT” icon Step 4: Turn on your multimedia device. Connectivity with multimedia devices Select “RCA’ The P300 Neo can connect to many media devices including: iPod, iPhone, iPad, VHS players, DVD players, Blu-Ray players, smart phones, cameras, video game consoles and other peripherals with ease. *Some smanphones require video out capabilities to be displayed with the P300 Neo. Check 12 with your phone manufacturer.

****** Page 16 ****** Connecting to Digital Video Input Step 1: Connect one end of the Digital Input cable to your P300 Neo’s Digital Video Input Adapter. v•oeo IN step 2: Connect the opposite end of the Digital Video Input cable to your device. Note: Apple devices require a specialized Digital Input adapter (Sold separately by Apple) PNIU’S 13

****** Page 17 ****** Connecting to Digital Video Input Cont. Step 3: In the Main Menu Select “INPUT” icon Step 4: ‘NPUt Select “DIGITAL INPUT” Icon Turn on your multimedia device. If available, select 1280×720. Connectivity with multimedia devices The P300 Neo can connect to many media devices including: iPod, iPhone, iPad, VHS players, DVD players, Blu-Ray players, smart phones, cameras, video game consoles and other peripherals with ease. *Some smanphones require video out capabilities to be displayed with the P300 Neo. Check 14 with your phone manufacturer.

****** Page 18 ****** Connecting Speakers / Headphones Step 1: Step 2: step 3: Connect your speakers/headphones to the projector’s audio port. Ensure that the projector and/or the headphones are powered on. Place the headphones on and enjoy! *CAUTION: Prolonged use of headphones at a high volume may impair hearing. 15

****** Page 19 ****** TF Card How to insert your TF Card Slide in your TF card into the TF card slot on the side of the P300 Neo (facing down as shown in picture). Gently slide the TF card until it clicks into place. How to access your TF Card Once your TF Card has been inserted, you can navigate to any media content category in the main menu. After selecting the media content cat- egory, choose the TF card selection. You can now access the data on your TF card through the onboard media player *Review the “Specifications” section of this manual to read about the supported file formats. (up to 32 GB) Note: Microsoft Office and PDF file formats are not supported To view a slideshow convert your slideshow into JPEG pictures first 16

****** Page 20 ****** TF Card Cont. VIDEOS PHOTOS Media Player menu DATA soul*CE HOME SEITiNas INPUTS In the main menu select the type of file you wish to play. Select the TF Card icon to acess your files. File Menu System The P300 Neo will show all folders and files you have on your TF Card in the C: drive. Use the touchpad to navigate to differ- ent folders or files. Return: Brings you back to the main menu 17

****** Page 21 ****** USB Drive How to insert your USB Drive Slide your USB Drive into the USB port (as shown in picture). Gently slide the drive until it cannot go in any further. How to access your USB Drive Insert your USB Drive into the projector. Use the navigation pad to choose the USB Drive icon from the main menu to access your files. Choose your desired file. *Review the “Specifications” section of this manual to read about the supported file formats. (up to 32 GB) Note: Microsoft Office and PDF file formats are not suppo/ted. To view a slideshow conven your slideshow into JPEG pictures first 18

****** Page 22 ****** USB Drive Cont. HOME SETTINGS INPUTS DATA SOURCE v•oros -ANA. PHOTOS Media Player menu In the main menu select the type of file you wish to play. Select the USB Drive icon to access your files. File Menu System The P300 Neo will show all folders and files you have on your USB Drive in the C: drive Use the touchpad to navigate to differ- ent folders or files. Return: Brings you back to the main menu 19

****** Page 23 ****** TF Card and USB Drive DATA SOURCE If both TF Card and USB Drive are inserted, depending on which one inserted first, the first one will show in the C: drive and the second one will show in the D: drive. 20

****** Page 24 ****** Menu Screens Main Menu Chapter 3 The P300 Neo features a built in PMP (Portable Media Player) function. This function allows the projector to play videos, pictures, music files, and text directly from your connected devices. PHOTOS HOME SETTINGS INPUTS Menu Exi Back Press the left and right directional buttons to choose an icon from the main menu. To select a menu option, press the “0K” button in the middle of the navigation pad. To go back to the previous screen, press the “Back” button. To Jump back to the submenu, press the “Menu” button once. To return to the main menu, press and hold the ‘Return” button. 21

****** Page 25 ****** Video Player Menu Opening a file: Select the “Video” icon (Fig. 3.1). From the submenu (Fig. 3.2), select the storage media with the stored files. Choose which file you wish to play. Fig. 3.1 Fig. 3.2 DATA SOURCE HOME 10. SETTING S The P300 Neo will show all folders and files you have on your USB and/or TF Card drive. (Fig. 3.2 assumes both USB and TF Card are inserted). Previewing Files: Press the directional keys to highlight the item of interest. Wait 2-3 seconds and a preview of the video will show on the screen. 22

****** Page 26 ****** Video Player Menu While Playing Videos While playing videos, the volume is adjustable. Further controls are available in the video player submenu – which is accessed through the “0K” button. Volume Down Volume Up A Positive Keystone Adjustment Negative Keystone Adjustment 0K Enter Video Player Submenu To open/hide the video playback menu, use the 0K” and g Back” Buttons on the projector. 23

****** Page 27 ****** Video Player Submenu Playing Videos The Video Player Submenu can be accessed by pressing “0K” during video playback. To exit the Video Player Submenu, press the “Back” button or wait 5 seconds. To navigate the Playback Menu, use the directional buttons on the navigation pad or remote to highlight the option you wish to choose (Fig. 3.3). 0K Fig. 3.3 Pause Volume Down Volume Up A Positive Keystone Adjustment Negative Keystone Adjustment Confirm selection Prev. Next / oo 04 20 Stop Aspect 24

****** Page 28 ****** Video Playback FAQ How do I loop a video? How do I preview a video? 1. 2. 3. 4. 5. Choose either USB or TF Card for playback Navigate the folders until you reach the file you wish to play. Highlight the file you want to play, then confirm the selection. Move selection on video player menu to “Repeat 1 and con- firm the selection. The video will now loop after playback is finished. 1 2. 3. 4. 5. Choose the “Videos” icon from the main menu. Navigate using either remote or onboard buttons to the file you wish to preview. Highlight the file. *Do not select the file, just highlight it. Wait 3-4 seconds. A preview screen will pop up on the lower right for the video. 25

****** Page 29 ****** Photo Menu Opening a File: Select the “Photos” icon from the main menu (Fig. 3.4). From the submenu (Fig. 3.5), select the storage media with the stored files. Choose which file you wish to play. Fig. 3.4 .22 Fig. 3.5 OATA SOURCE HOME SETTINGS INPUTS The P300 Neo will show all folders and files you have on your USB and/or TF Card drive. (Fig. 3.5 assumes both USB and TF Card are inserted). Previewing Files: Press the directional keys to highlight the desired file. Wait 2-3 seconds and a preview of the picture will show on the screen. 26

****** Page 30 ****** Photo Menu While Viewing Pictures While viewing pictures, further controls are available in the Photo Submenu – which is accessed through the “0K” button. Previous Picture Next Picture A Positive Keystone Adjustment V Negative Keystone Adjustment 0K Enter Photo Player Submenu To open/hide the Photo Playback menu, use the “0K” and “Back” Buttons on the projector.

****** Page 31 ****** Photo Submenu Viewing Pictures: The Photo Submenu can be accessed by pressing “0K” during picture slide-show playback. To exit the Photo Submenu, press the “Back” button or wait 5 seconds. To navigate the playback menu, use the directional buttons on the navigation pad or remote to highlight the option you wish to choose (Fig 3.6). Previous Picture A Positive Keystone Adjustment Y Negative Keystone Adjustment Next Picture Confirm selection Fig 3.6 Pause Prev. Next Stop epeat N MSC Off Playlist 28

****** Page 32 ****** Photo Slideshow FAQ How do I play a slideshow? How do I manually control the slideshow? 1. 2. 3. 4. 5. 6. Choose either USB or TF Card for playback Navigate to the folder that contains the pictures you wish to view in the slideshow. Confirm selection of the first picture. Press “Play” in the photo menu Slideshow will now play. NOTE: Selecting “Repeat A” will loop slideshow. 1. 2. 3. After selecting the photo you wish to be displayed, you can press “Play” to start the slideshow (as outlined in the previous FAQ). To manually control the slideshow, you must stop the slideshow with the “Stop” button. You may use either the controls on your remote or on top of the projector itself to flip through the pictures in the current playlist. 29

****** Page 33 ****** Music Player Menu Opening a File: Select the “Music” icon (Fig. 3.7). From the Submenu (Fig. 3.8), select the storage media with the stored files. Choose which file you wish to play. Fig. 3.7 snoeos Fig. 3.8 OATÅ SOURCE The P300 Neo will show all folders and files you have on your USB and/or TF Card drive. (Fig. 3.5 assumes both USB and TF Card are inserted). Previewing Files: Press the directional keys to highlight the desired file. Wait 2-3 seconds and a preview of the audio will show on the screen. 30

****** Page 34 ****** Music Player Menu Listening to Audio: To adjust the volume, use the left and right button on the projector or the volume keys on the remote. To navigate the playback menu, push the “0K” button to open the menu and use the directional buttons on the navigation pad or remote to highlight the option you wish to choose (Fig 3.9). To open/hide the music playerback menu, use the “0K” and “Back” button on the projector. Fig. 3.9 0K Pause Volume Down Volume Up A Positive Keystone Adjustment Negative keystone Adjustment 0K Confirm selection Prev. Next stop R_ALL Mute 31

****** Page 35 ****** Music Playback FAQ How do I loop a song? How do I create a song playlist? 1. 2. 3. 4. 5. Choose either USB or TF Card for playback Navigate the folders until you reach the file you wish to play. Highlight the file you want to play, then confirm the selection. Move selection on music player menu to “Repeat 1 , ” and con- firm the selection. The song will now loop after playback is finished. 2. 3. 4. 5. 6. 7. 8. Insert your media device (either TF card or USB) into computer. Make a new folder on media device (folder name will be the name of the playlist). Transfer songs from computer to the new folder, name accordingly. Remove media device from computer and insert into projector. Navigate to Audio section, then choose appropriate media device. Navigate to your playlist folder. Start at first song. Playback will follow each successive song on the list. *To create a special order for the list, add nu- merical numbering to the beginning of each file. 32

****** Page 36 ****** E-Book Viewer Menu Opening a File: Select where the files are located from the main menu. Select the “Text” icon (Fig. 3.10) Choose the file you wish to play. VIDEOS .72 Fig. 3.10 *OME SETTINGS INPUTS The P300 Neo will show all folders and files you have on your USB or TF Card Drives. Viewing Text Files: The P300 Neo Micro Projector allows you to view text files. Select the file you want to view in the file menu for the particular storage device on which the file is stored. You can press the up and down arrow buttons on the remote to flip through the pages you have in the present folder. Note: Microsoft Office and PDF file formats are not supported To view a slideshow conven your slideshow into JPEG pictures first 33

****** Page 37 ****** Setup Menu The Settings Menu can be accessed by selecting “Setting” on the Main Menu VIDEOS i PHOTOS MUSIC TEXT HOME SETTINGS INPUTS Within the settings menu, there are four more submenus that allow you to customize your P300 Neo to the settings you want. Chapter 4 Picture Picture Mode Color Mode Aspect Ratio Brightness Mode Projection Sound Sound Mode Balance Auto Volume Time Sleep Timer Auto Sleep Option OSD Language Restore Factory Default 34

****** Page 38 ****** Picture Settings Picture Mode Changes the picture mode to different settings depending on your usage Color Mode Adjusts the color temperature from warm to cool (red to blue) Aspect Ratio Changes the aspect ratio of the picture – Auto, 4:3, 16:9*, etc. Brightness Mode Choose between Eco, Standard, and Boost* * Projection Flips the projected image PICTURE Picture Mode Standard Cøi•r Temperature Aspect Ratio Brightness Mode Eco Frant inverted *Caution: Some pictures may be cut off when aspect ratio is set incorrectly * *Boost mode should only be used in low temperature environments with adequate clearance of exhaust / intake vents. A tripod is highly recommended. DO NOT block vents while operating in Boost mode. Note: Boost Mode can only be used for 1 hour. 35

****** Page 39 ****** Sound Settings Sound Mode Balance Auto Volume User SOUND Sound Mode Changes the sound mode depend- ing on what is currently playing Balance Adjusts the sound balance manu- ally Auto Volume With the Auto Volume On, the video can be opened with volume automatically 36

****** Page 40 ****** Time Settings Sleep Timer Auto Sleep TIME Sleep Timer Sets when projector goes to sleep Auto Sleep Sets auto sleep function where projector will turn off when not in use or if there is no signal. 37

****** Page 41 ****** Option Settings (‘SO Language English Restore Factory Default OPTION OSD Language Changes the language of the device. Options include English, Spanish, Chinese, German, French, Korean, Japanese Restore Factory Default Restores the projector to factory settings 38

****** Page 42 ****** Keystone Adjustments What is Keystoning? “Keystoning” occurs when a projector is aligned non-perpendicularly to a screen, or when the projection screen has an angled surface. The image that results from one of these misalignments will look trapezoidal rather than square. Digital Keystone Adjustments By adding a special, selectable algorithm to the scaling, some new projectors are able to alter the image before it reaches the projection lens. The result is a squared image, even at an angle. 39

****** Page 43 ****** Keystone Adjustments FAQ How to Correct Keystone If the image looks trapezoidal with the base larger (as pictured right), press the bottom button on the directional pad on the top of the P300 Neo until the keystone effect corrects and the picture turns into a square projection. If the image looks trapezoidal with the top larger (as pictured right), press the top button on the directional pad on the top of the P300 Neo until the keystone effect corrects and the picture turns into a square projection. 40

****** Page 44 ****** Technical Details Troubleshooting IMAGE IS BLURRED Possible Causes The Projector is not in focus The Projector is offset from plane / angle of operation NO SYNC, NO SIGNAL Chapter 5 Solution Adjust the focus with the focus adjustment dial until the image comes into focus Move the projector so that it is both 180 degrees and on an evern plane with the screen. Or it can be adjusted by keystone settings 1. Be sure to setup the computer to enable a video signal output. On some lap- tops this is done by pressing and holding Function F5 key. If using the P300 Neo as an external monitor on Windows based systems, this can be done by se- lecting “extend my desktop to this monitor”. The native resolution of the P300 Neo projector is 1280×720. Depending on the video driver different resolutions may need to be selected for proper output. 41

****** Page 45 ****** Technical Details Troubleshooting THE PROJECTOR DOES NOT TURN ON Possible Causes There is no power Projector is under STNADBY mode NO PICTURE / FILE NOT SUPPORTED Possible Causes The video source is not properly connected or selected Incorrect file extension / Video is encoded with incorrect codec Solution Check to ensure the power outlet source is good. Check the power adapter to ensure a proper con- nection with the wall outlet as well as the projector. Confirm that the unit is charged and has enough power To power on the projector, press the power button on the remote Solution Check the video source signal to ensure that it is properly connected. Select the current input source by choosing the input desired from the main menu Please refer to “Specifications” page to see which file types and codex are supported. Verify that the file was encoded properly. 42

****** Page 46 ****** Specifications Brightness: Native Resolution: Max Resolution: Battery Runtime: Contrast Ratio: Aspect Ratio: Projection Lens: Image Size: Lamp: Video in: Audio Output: TF Card: USB: Dimensions: Weight: Supported File Formats: *HDMITM is a registered trademark of HDMI Licensing LLC. 420 Lumens 1280×720 (720p) 1920×1080 (1080P) 150 Minutes (Eco Mode) 1000:1 16:9 Manual Focus 10—120 inches Triple RGB LEDs with Vibrant Color Technology Life 30,000hrs Composite AN Mini-VGA Digital Input (Compatible with Full Size HDMITM) 3.5 mm audio jack TF Card Slot (32GB maximum) 5 Pin USB 2.0 (Full Size) (32GB maximum) 5.9″ x 3.5″ x 1.2″ 0.84 lbs MP3, WMA, OGG, WAV, JPG AVI, BMP, GIF 43 AAXA Technologies is not affiliated with HDMI Licensing LLC.

****** Page 47 ****** Notes

****** Page 48 ****** Please direct all customer service inquiries to: AAXA Technologies, Inc. 17691 Mitchell N., Unit Irvine, CA 92614 (714) 957-1999 info@aaxatech.com


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL

AAXA TECHNOLOGIES P300 NEO (01) PDF MANUAL

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.