DIGITECH AUDIO AA-2104 (01) PDF MANUAL

DIGITECH AUDIO AA-2104 (01) PDF SUMMARY:

What is the first step to take when using the AA-2104 unit?

For the first use, please fully charge the AA-2104 unit.

---

How will I know when the device needs to be charged?

When the device is in one of the Bluetooth modes, the RED LED will flash three times continuously (not including when the Red LED flashes once for successfully connection), when the battery is low, please charge the unit.

---

How do I charge the AA-2104?

Connect the charging cable to a USB power adapter (not supplied), USB port or computer. Once connected, the Micro USB charging cable will begin to charge AA-2104 unit.

---

How will I know when the unit is fully charged?

In charging mode, the Red LED will turn off when full charged.

---

How long does the unit take to fully charge?

The entire charging time should take around 2 hours.

---

How do I use the device as a Bluetooth transmitter?

When the unit is in an off state, please slide the button to “TX” side on the side of the unit, then press MFB to power on the unit.

---

What happens to paired device information when switching to transmitter mode?

All the paired device information in RX mode will be deleted after the device is powered on.

---

Should I switch between TX and RX modes immediately after turning off the unit?

Please don’t switch TX or RX mode immediately after unit turning off the unit.

---

How many devices will the unit remember when working as a Bluetooth transmitter?

When working as the Bluetooth transmitter, the unit will remember up to 4 devices.

---

How long does the unit take to automatically reconnect to a paired device?

• In 7 seconds if the unit has 1 paired device.
• In 12 seconds if the unit has 2 paired devices.
• In 17 seconds if the unit has 3 paired devices.
• In 22 seconds if the unit has 4 paired devices.

---

How do I power on the AA-2104?

In an off state, press MFB for around 3 seconds, the Blue LED will then flash twice.

---

How do I power off the AA-2104?

In an on state, press MFB for around 3 seconds, the Red LED will flash twice.

---

How do I enter pairing mode?

Power on the unit, double click the MFB, the Blue LED will flash quickly to enter pairing mode. It will be in connective standby mode if no connections in 2 minutes.

---

How do I clear the pairing list?

Power off with the current working mode (TX or RX), 3 seconds later, switch to the other working mode, then power on, the pairing information for the former mode will be cleared up.

---

How do I connect with all connected devices?

Power on the unit (using two connections simultaneously), short press MFB to connect all the connected device automatically.

---

How many devices does the unit support simultaneously in TX mode?

The unit will only support two devices connected simultaneously in TX mode.

---

Which devices does the unit prioritize when connecting in TX mode?

It will prioritize the latest two connected devices.

---

When does the device power off automatically?

The AA-2104 will power off automatically when the battery voltage is lower than 3.1V.

---

What are the LED indicators in transmitter mode?

• Power on: Blue LED flashes twice quickly.
• Pairing: Blue LED flashes quickly.
• Unconnected standby mode: Blue LED flashes once every second.
• Connected standby mode: Solid Blue LED.
• Low voltage: Red LED flashes quickly.
• Charging: Solid Red.
• Fully charged: Red LED turns off.

---

How do I transmit audio from a TV to Bluetooth headphones or speakers using the AA-2104?

1. Make sure the Bluetooth speaker or Bluetooth headset is in pairing mode.
2. Press the MFB on the AA-2104 for around 3 seconds until the Blue LED flashes quickly to enter into pairing mode, if the AA-2104 does not enter into pairing mode, press the MFB for 2 Seconds then double press the MFB (keep pressing consistently) to enter into pairing mode.
3. Put the AA-2104 and Bluetooth speaker or Bluetooth headset together, around 30 seconds later, AA-2104 will connect with the Bluetooth speaker or Bluetooth headset automatically.
4. Connect the AA-2104 and TV with an appropriate audio cable. (Plug one side of the audio cable to the audio output jack of the TV, then plug into side to AA-2104 in the 3.5mm audio port on the unit).
5. You then should hear the sound coming from TV through the Bluetooth headset or Bluetooth speaker. If there is no sound in the Bluetooth speaker or Bluetooth headset, please check the audio output setting on TV and that the volume of the TV is set to a sufficient level.

---

How do I use the AA-2104 with a computer and Bluetooth headphones or speakers?

1. Make sure your Bluetooth speaker or Bluetooth headset is in pairing mode.
2. Press MFB on the AA-2104 for around 3 seconds until the Blue LED flashes quickly to enter into pairing mode, if the AA-2104 does not enter into pairing mode, press MFB for 2 Seconds then double press MFB to enter into pairing mode.
3. Put the AA-2104 and Bluetooth speaker or Bluetooth headphone together, around 30 seconds later, AA-2104 will connect with the Bluetooth speaker or Bluetooth headphone automatically.

---

How do I connect two devices simultaneously while using the AA-2104 as a Bluetooth transmitter?

1. Name the two Bluetooth headsets or two Bluetooth speakers as A & B.
2. Select the TR mode on the AA-2104.
3. Follow the above pairing steps for working as a Bluetooth transmitter to connect device A and AA-2104.
4. When the connection is successful, power off the device A, and then pair Device B with AA-2104 (following the same pairing steps).
5. After successfully connecting with device B, then power off AA-2104.
6. Power on the device A.
7. Then power on the AA-2104 (no need to enter into pairing mode), it will search and connect with device A and B automatically, the pairing time will take around 30 seconds. Then connect to audio source to check if the two devices are playing simultaneously. If not, please power off AA-2104, and reopen AA-2104 to connect with device A and B. If restarting AA-2104 does not work, please rework the steps for two connections simultaneously.

---

What should I do if one of the connected devices has no sound or intermittent playing?

When one of the devices connected has no sound or intermittent playing, please re-pair the two devices two or three times to check if the problem is still occurring.

---

Can the AA-2104 connect with two mobile phones simultaneously as a Bluetooth receiver?

Yes, the AA-2104 can connect with two mobile phones simultaneously, but it could not play music from two mobile phone at the same time.

---

How do I connect two mobile phones to the AA-2104 in receiver mode?

1. Name the two mobile phone as A and B.
2. Following the pairing steps to connect A with AA-2104, after successful connection, please switch off the Bluetooth of the mobile A. Double click MFB of AA-2014 to enter into pairing mode.
3. Connect mobile B with AA-2104. After successfully connection, power off AA-2014. Switch on the Bluetooth of mobile A, and then power on AA-2014, around 30 seconds AA-2014 and the two mobile phones will connect automatically.

---

What should I do if the AA-2104 does not connect to a Bluetooth device after 1 minute?

If the AA-2104 has not connected with the target Bluetooth headset or speaker after more than 1 minute, please try to clear up the pairing list of the AA-2104.

---

How do I maintain the battery for optimal performance?

• The full performance of a new battery is achieved only after two or three complete charge and discharge cycles.
• Do not leave a fully charged battery connected to a charger since overcharging may shorten battery lifetime.
• If left unused, a fully charged battery will lose power over time.
• Leaving the device in hot or cold places will reduce the capacity and lifetime of the battery.
• You should always try to keep the battery between 15 ℃ and 25 ℃.
• Battery performance is particularly limited in temperatures well below freezing.
• Do not dispose of batteries in a fire as they may explode.
• Batteries may also explode if damaged.

---

What safety instructions should I follow when using the AA-2104?

• Keep the unit away from children.
• Maintain equipment dry, rain, moisture and all kinds of liquids or moisture can contain minerals, corrode electronic circuit.
• If the device is wet, please make it completely dry.
• Do not use or put the devices in dust or dirt storage, it will damage the detachable parts and electronic components.
• Do not use equipment very hot environments, overheating, high temperature will shorten the service life of electronic devices, damage batteries, make some plastic parts deform or melt.
• Do not use equipment in very cold environments.
• Do not attempt to disassemble the device.
• Do not use strong chemicals, detergent or detergent to clean the device.

---

What is the caution regarding the battery?

Risk of explosion if the battery is replaced by an incorrect type.

---

How should I dispose of used batteries?

Dispose of used batteries according to the instructions.

---

How should I dispose of old electrical appliances?

Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points.