CECOTEC BOLERO MINICOOLING 20L BAHAMAS PAT 1 (01) PDF DOCUMENT

The CECOTEC BOLERO MINICOOLING 20L BAHAMAS PAT 1 includes the following components:

Power Cables:

1. AC Power cable

2. DC Power cable

Control Panel:

1. Red light: Indicates heating mode is activated.

2. Green light: Indicates cooling mode is enabled.

3. Mode change switch with three positions:

a. Heating mode

b. Off

c. Refrigeration mode

4. DC connector

5. AC connector

The CECOTEC BOLERO MINICOOLING 20L BAHAMAS PAT 1 is packaged to protect it during transport. Take the appliance out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place to prevent damage if you need to transport it in the future.

Make sure all parts and components are included and in good condition. If any piece is missing or in bad condition, contact the official Cecotec Technical Support Service immediately.

1. Make sure that the mode switch is in the OFF position before connecting the mini fridge to a power outlet.

2. Plug the AC power cable into the AC connector of the mini fridge.

3. Place the mini fridge on a stable surface and plug the other end of the cable into a power outlet.

4. Set the switch to Cooling mode or Heating mode.

1. Keep the switch in the OFF position before connecting the mini fridge to the socket in your car.

2. Plug the DC power cable into the DC connector of the mini fridge.

3. Place the mini fridge on a stable surface and plug the other end of the cable into the connector in your car.

4. Set the switch to Cooling mode or Heating mode.

WARNING: For the operation of the mini fridge, it is necessary to use the car engine. Do not leave the mini fridge running in the car with the engine switched off.

Internal temperature

The temperature inside the refrigerator will not immediately reach the desired temperature when it is switched on. It usually takes about 2 hours to reach the desired temperature. The minimum temperature of the mini fridge varies according to the ambient temperature.

Cool down

For faster cooling, store cold drinks in the mini fridge. Temperature depends on the environment. The colder the ambient temperature, the cooler the mini fridge will be. Ambient temperature is the temperature of surrounding air. When the ambient temperature is 25 °C, it may be cooled down to about 10 °C.

Heating

The appliance is also designed to keep warm. It is not designed to directly heat up cold items. After switching the mini fridge off, hot items will maintain their temperature for several hours, provided the door is properly closed. Temperature dwell time will vary depending on environmental conditions. Take care to avoid burns during use of the mini fridge in Heating mode. When the room temperature is 25 °C, it may be heated up to about 60-65 °C.

The green indicator light indicates that Cooling mode is enabled, while the red indicator light indicates that Heating mode is enabled.

Make sure that the mode switch is at least 30 minutes in the off position before switching between modes.

Never use the mini fridge in a car with a voltage of 24V, or in a house with a voltage other than 220-240V. This will cause malfunctions and fire.

This product should not be used near water and at high temperatures to avoid malfunctions, electric shock and other accidents.

Transforming or tampering with the mini fridge and power cord will result in malfunction and fire.

In summer, do not place the mini fridge inside the car or in the boot and other high temperature places to avoid appliance failure.

When using the appliance in the car, be sure to switch on the engine and, if the engine is switched off, disconnect the power cable.

Unplug the power cord when the appliance is not to be used for a long period of time.

Do not block the air inlet or drain hole, as the appliance will not cool down or heat up.

Make sure to unplug the appliance after use and before storing it.

Store the mini fridge in a cool, dry place. Always make sure it is completely dry before storing it.

Always let the mini fridge dry completely with the door open before storing it. Keep the door open while the appliance reaches room temperature to avoid moisture and mould formation inside the appliance.

Clean the mini fridge with a soft, damp cloth.

It is common for condensation to form inside the mini fridge be sure to clean it frequently to prevent bad odours and ensure proper operation.

1. Check the indicator lights. If the indicator light is off or goes on and off, check the state of the electrical connection.

2. Make sure the sockets are in good condition and clean them if necessary.

1. Make sure that the switch is in the desired mode and check if the fan is working properly.

2. The lowest possible temperature depends on the surrounding environment. The colder the ambient temperature, the cooler the mini fridge will be.

Place the appliance more than 5 cm away from the wall to ensure good heat dissipation.

To ensure optimum performance, do not use the mini fridge in places with a high ambient temperature.

Avoid direct cooling of hot objects.

The mini fridge works on a thermoelectric system and the difference in temperature between inside and outside or frequent opening of the door will cause interior condensation or frost formation, which is normal.

It is not recommended to keep the door open or to open or close it frequently. Do not attempt to directly cool down hot items.

Reference: 02701

(*) Approximate values which may vary depending on many factors.

(**) Refrigerating appliance intended for use at room temperatures between 10°C and 32°C.