CECOTEC BOLERO MINICOOLING 20L BAHAMAS PAT 2 (01) PDF DOCUMENT

The CECOTEC BOLERO MINICOOLING 20L BAHAMAS PAT 2 includes the following parts and components:

Cables:

1. AC Power cable

2. DC Power cable

Control Panel:

1. Red light: indicates heating mode is activated

2. Green light: indicates cooling mode is enabled

3. Mode change switch with three positions:

a. Heating mode

b. Off

c. Refrigeration mode

4. DC connector

5. AC connector

Before first use, take the CECOTEC BOLERO MINICOOLING 20L BAHAMAS PAT 2 out of its box and remove all packaging materials. It is recommended to keep the original box and other packaging elements in a safe place to prevent damage if you need to transport it in the future. If you dispose of the original packaging, ensure all materials are recycled accordingly. Make sure all parts and components are included and in good condition.

1. Make sure that the mode switch is in the OFF position before connecting the mini fridge to a power outlet.

2. Plug the AC power cable into the AC connector of the mini fridge.

3. Place the mini fridge on a stable surface and plug the other end of the cable into a power outlet.

4. Set the switch to Cooling mode or Heating mode.

1. Keep the switch in the OFF position before connecting the mini fridge to the socket in your car.

2. Plug the DC power cable into the DC connector of the mini fridge.

3. Place the mini fridge on a stable surface and plug the other end of the cable into the connector in your car.

4. Set the switch to Cooling mode or Heating mode.

WARNING: For the operation of the mini fridge, it is necessary to use the car engine. Do not leave the mini fridge running in the car with the engine switched off.

The temperature inside the refrigerator will not immediately reach the desired temperature when it is switched on. It usually takes about 2 hours to reach the desired temperature. The minimum temperature of the mini fridge varies according to the ambient temperature.

Cool down: For faster cooling, store cold drinks in the mini fridge. The temperature depends on the environment; the colder the ambient temperature, the cooler the mini fridge will be. Ambient temperature is the temperature of the surrounding air. When the ambient temperature is 25 °C, it may be cooled down to about 10 °C.

Heating: The appliance is also designed to keep items warm; it is not designed to directly heat up cold items. After switching the mini fridge off, hot items will maintain their temperature for several hours, provided the door is properly closed. Temperature dwell time will vary depending on environmental conditions. Take care to avoid burns during use of the mini fridge in Heating mode. When the room temperature is 25 °C, it may be cooled down to about 10 °C.

Note: The green indicator light indicates that Cooling mode is enabled, while the red indicator light indicates that Heating mode is enabled. Make sure that the mode switch is in the off position for at least 30 minutes before switching between modes.

Read these instructions thoroughly before using the appliance. Keep this instruction manual for future reference or new users.

This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance should not be carried out by unsupervised children.

Do not store explosive substances such as aerosol cans with flammable propellant in this appliance.

This appliance is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices.

Children from 3 to 8 years old are allowed to load and unload refrigeration appliances.

When positioning the appliance, make sure that the power cable is not trapped or damaged.

Do not place multiple mobile sockets or mobile power supplies on the rear of the appliance.

The appliance must not be exposed to rain.

Keep the ventilation grilles of the enclosure of the appliance or of the built-in cabinet clear.

Do not use mechanical devices or similar to accelerate the defrosting process other than those recommended by the manufacturer.

Do not use electrical devices inside the preservation of food compartments unless they’re of a type recommended by the manufacturer.

Do not damage the refrigeration circuit.

Make sure to unplug the appliance after use and before storing it.

Store the mini fridge in a cool, dry place. Always make sure it is completely dry before storing it.

Always let the mini fridge dry completely with the door open before storing it. Keep the door open while the appliance reaches room temperature to avoid moisture and mould formation inside the appliance.

Clean the mini fridge with a soft, damp cloth.

It is common for condensation to form inside the mini fridge; be sure to clean it frequently to prevent bad odours and ensure proper operation.

1. Check the indicator lights. If the indicator light is off or goes on and off, check the state of the electrical connection.

2. Make sure the sockets are in good condition and clean them if necessary.

1. Make sure that the switch is in the desired mode and check if the fan is working properly.

2. The lowest possible temperature depends on the surrounding environment. The colder the ambient temperature, the cooler the mini fridge will be.

Place the appliance more than 5 cm away from the wall to ensure good heat dissipation.

To ensure optimum performance, do not use the mini fridge in places with a high ambient temperature.

Avoid direct cooling of hot objects.

The mini fridge works on a thermoelectric system and the difference in temperature between inside and outside or frequent opening of the door will cause interior condensation or frost formation, which is normal. It is not recommended to keep the door open or to open or close it frequently. Do not attempt to directly cool down hot items.

(*) Approximate values which may vary depending on many factors.

(**) Refrigerating appliance intended for use at room temperatures between 10°C and 32°C.

The temperature range information for the appliance can be found on the product marking. It indicates the optimum room temperature for proper operation. The climate classes and their corresponding optimum room temperatures are: