FREE ENGLISH BOSCH SOLUTION 2000 (02) PDF USER GUIDE
FREE ENGLISH BOSCH SOLUTION 2000 (02) PDF USER MANUAL
FREE ENGLISH BOSCH SOLUTION 2000 (02) PDF OWNER GUIDE
FREE ENGLISH BOSCH SOLUTION 2000 (02) PDF OWNER MANUAL
FREE ENGLISH BOSCH SOLUTION 2000 (02) PDF REFERENCE GUIDE
FREE ENGLISH BOSCH SOLUTION 2000 (02) PDF INSTRUCTION GUIDE
FREE ENGLISH BOSCH SOLUTION 2000 (02) PDF REFERENCE MANUAL
FREE ENGLISH BOSCH SOLUTION 2000 (02) PDF INSTRUCTION MANUAL
FREE ENGLISH BOSCH SOLUTION 2000 (02) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD BOSCH SOLUTION 2000 (02) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the safety warnings regarding electricity?
Danger! Electricity
Injuries due to electricity are possible if the system is not operated correctly or if the system is opened or modified. Never open or modify the system. Contact your installer if you want to get your system modified.
What precautions should be taken for sensitive components?
Caution! Sensitive components
Damage of sensitive components is possible if the system is not handled carefully or if the system is opened or modified.
Always handle the system carefully.
Never open or modify the system.
Please contact your installer if you want to get your system modified.
How should old electrical and electronic equipment be disposed of?
This product and/or battery must be disposed of separately from household waste. Dispose such equipment according to local laws and regulations, to allow their reuse and/or recycling. This will help in conserving resources, and in protecting human health and the environment.
What is the purpose of this short information manual?
This manual describes the most important operations of the Solution 2000 / 3000 / 4000 control panels. It does not replace the control panel User manual.
What are the default codes for the system?
Master code default: [2] [5] [8] [0]
Installer code default: [1] [2] [3] [4]
Who should I contact for installation and programming?
Please contact your installer to complete the installation and programming as instructed in the control panel Installation manual.
How do I enter the user menu on an LCD alphanumeric keypad?
It is convenient to operate the system with the LCD alphanumeric keypad.
1. Enable the keypad and confirm that the system is in disarmed status.
2. To enter the menu:
– Users with authority levels can enter their own user menu by entering the user code (default = 2580) followed by the [-] key.
– Without any codes, users can enter the general menu by only pressing [-] key.
3. Select the menu and operate according to the menu prompts.
How do I change the Master Code?
1. Enter the master code, then press [-].
2. Select menu [2] [2] (User Code), press [#] to select U01 – User 01 Name.
3. Enter the new master code, and press [#].
4. Press [-] until “Confirm to Save Parameter Change” appears, then press [#].
What user code commands can be executed with the LCD alphanumeric or LCD icon keypad?
The system supports 4-digit programmable user code to execute the following user code commands:
| Master/User Command | Function Description |
|---|---|
| Code+[1][#] | Change or Delete User Code and RF Keyfob |
| Code+[2][#] | Change Domestic Phone Number |
| Code+[3][#] | Change Telco Arm/Disarm Sequence |
| Code+[4][#] | Setting STAY Mode 2 Zones |
| Code+[5][#] | Turn Output On/Off |
| Code+[6][#] | Setting the Date and Time |
| Code+[7][#] | Walk Test Mode |
| Code+[8][#] | Event Memory Recall Mode |
| Code+[9][#] | Duress Disarm |
| Code+[*] | STAY 1 Arm / Disarm or STAY 2 Disarm |
| Code+[#] | AWAY Arm / Disarm |
| Code+[0][1][*] | STAY1 Arm/Disarm Area 1 Or STAY2 Disarm Area 1 |
| Code+[0][2][*] | STAY1 Arm/Disarm Area 2 Or STAY2 Disarm Area 2 |
| Code+[0][1][#] | AWAY Arm/Disarm Area 1 |
| Code+[0][2][#] | AWAY Arm/Disarm Area 2 |
| Code+[9][9][8][#] | System Reset |
| Code+[9][4][1][#] | Reset Network Module 1 |
| Code+[9][4][2][#] | Reset Network Module 2 (only for Solution 4000) |
| Code+[9][0][#] | Cycle door (only via assigned keypad) |
| Code+[9][1][#] | Door commands: 1. Cycle, 2. Lock, 3. Unlock, 4. Secure, 5. Unsecure |
What commands are available only with the LCD icon keypad?
| Command | Function Description |
|---|---|
| Code+[1][2][3][#] | Inquire Cloud status |
| Code+[1][4][1][#] | RF zone diagnose |
| Code+[1][4][2][#] | RF keyfob diagnose |
| Code+[1][4][3][#] | RF repeater diagnose |
How can I operate the system using keypad keys?
You can operate the system with the corresponding keypad keys:
– Long press command, hold-down the single key for 3 seconds.
– Two keys command, press and hold (or press and release) the two keys at the same time.
– Other command, press and release the single key.
Long press command:
| Keypad Command | Function Description |
|---|---|
| [0] (long press) | Arm/Disarm the system in STAY Mode 2 |
| [1] (long press) | Horn Speaker Test |
| [2] (long press) | Bell Test |
| [3] (long press) | Strobe Test |
| [4] (long press) | Turn Day Alarm On/Off |
| [5] (long press) | Fault Analysis Mode |
| [6] (long press) | Initiate a Modem Call |
| [7] (long press) | Reset Latching Output |
| [8] (long press) | Change the Codepad Buzzer Tone and Codepad Area Display |
| [9] (long press) | Send Test Report |
| [*] (long press) | Arm the system in AWAY Mode |
| [#] (long press) | Arm/Disarm the system in STAY Mode 1 |
Two keys Command:
| Keypad Command | Function Description |
|---|---|
| [1]+[3] or [*]+[#] | Codepad Panic Alarm |
| [4]+[6] | Codepad Fire Alarm |
| [7]+[9] | Codepad Medical Alarm |
Other Command:
| Keypad Command | Function Description |
|---|---|
| [*] [*] | Entering Zone Bypass |
| [#] | Stop Walk Test / New Fault Confirm |
What should I do in case of problems or unexpected behavior of the system?
Please contact your installer in case of problems or any unexpected behavior of the system.
What control panels does this information apply to?
Throughout this document, the words “control panel” refer to all Solution 2000/3000/4000 control panels including:
– ICP-SOL2-P Control panel PCBA, 8-zone
– ICP-SOL2-APR Control panel, 8-zone, 230VAC
– ICP-SOL2-PE Control panel with enclosure, 8 zone
– ICP-SOL3-P Control panel, 16-zone
– ICP-SOL3-APR Control panel, 16-zone, 230VAC
– ICP-SOL3-PE Control panel with enclosure, 16 zone
– ICP-SOL4-P Control panel, 32-zone
– ICP-SOL4-PE PCB and enclosure, 32 zone
Where can I find more detailed information on operation and installation?
For detailed information on operation and installation, the following documents are available:
– User manual
– Installation manual
– Quick installation guide
CLICK HERE TO DOWNLOAD BOSCH SOLUTION 2000 (02) PDF MANUAL