BEYERDYNAMIC DT 71 IE (01) PDF DOCUMENT

Please follow these safety instructions for your BEYERDYNAMIC DT 71 IE earphones:

Read the manual carefully and completely before use.

Heed all instructions given, especially those regarding safe use.

Do not use the earphones if they are defective.

Only use the BEYERDYNAMIC DT 71 IE as described in the user manual.

High volume levels over long listening periods can permanently damage your hearing. As the BEYERDYNAMIC DT 71 IE sits directly in the ear canal, there is an increased risk of hearing damage.

Before using the BEYERDYNAMIC DT 71 IE, set the volume to minimum. Only increase the volume after inserting the earphones.

In case of tinnitus, reduce the volume. If necessary, consult a doctor.

According to regulations to protect employees against damages caused by noise and vibrations, please follow these instructions:

Earphones drastically reduce the perception of ambient noise. Using earphones in road traffic can be potentially dangerous. The user’s hearing must not be impaired to the extent that it causes road safety risks.

Please make sure that you do not use the BEYERDYNAMIC DT 71 IE in road traffic or within the action area of potentially dangerous machines and tools.

Avoid using the BEYERDYNAMIC DT 71 IE in situations where hearing must not be impaired, particularly when crossing a level crossing or on a construction site.

Risk of injury: You should avoid sudden movements when using wired earphones. You could seriously injure yourself, especially if you are wearing piercings, earrings, glasses etc., on which the cable could get caught.

Risk of swallowing: Keep small parts, such as product, packaging, and accessories, away from children and pets. They constitute a choking hazard if swallowed.

One pair of earphones

One straight cable, 1.40 m, MMCX to 3-pole mini jack (3.5 mm)

One adapter mini jack (3.5 mm) to 1/4″ jack (6.35 mm)

One carrying case

Three pairs of memory foam eartips (S, M, L)

Five pairs of silicone eartips (XS, S, M, L, XL)

One additional pair of earwax guard grilles

The delivery includes five pairs of silicone eartips (XS, S, M, L, XL). The sizes are marked on the shaft of the silicone eartips.

To fit them:

Carefully place the silicone eartips onto the earphone housings.

Make sure that the oval opening of the eartip aligns with the oval shape of the housing.

Fitting and adjusting the Comply™ eartips:

Carefully place the Comply™ eartips onto the earphone housings.

Before inserting, roll the eartip attached to the earphone tightly lengthwise between your fingers.

After insertion, the eartips will expand, providing a secure fit and good support for the earphones, even during movement.

Removing Comply™ eartips:

To remove Comply™ eartips, squeeze them firmly and pull them off the housing with a slight twisting motion.

If you are using them regularly, we recommend changing the eartips every three months.

1. Carefully remove the eartip from the earphone.

2. Dirty sound outlets can be cleaned by replacing the small earwax guard grilles.

Use a lint-free cleaning cloth to clean the earphone’s sound outlet from residues.

Make sure that no liquid flows into the outlet.

3. Attach the earwax guard grille to the earphone.

4. Attach the eartip to the earphone.

The earphones have plug-in cables on the housings with standard MMCX connectors with locking mechanisms. When detaching or attaching the cable, always hold the cable by the connector to avoid damaging the cable or earphone. Do not pull directly on the cable! Otherwise, the cable or the earphone may be damaged.

Detach the cable from the housing.

Attach the cable.

Due to the anatomical shape of the earphone housing, the cable of the earphone is routed behind the ear. This way of wearing the earphone effectively suppresses cable noise, and the earphone sits firmly in the ear even when the cable is pulled.

1. Bend the ear hooks to fit around your ears. Insert the earphones so that they ensure a proper seal. A good fit has a major effect on the sound quality.

2. Important: If the bass is weak, the eartips are not sealing properly. Insert the earphone deeper or use another size of the eartips to achieve a better fit.

General Usage:

Only use the earphones in healthy ears. If you have an ear canal infection or other ear disease, never use earphones until the disease is completely healed.

We recommend cleaning the eartips and the earphones on a daily basis.

Cleaning the eartips:

Remove the eartips from the earphones. Silicone eartips can be cleaned under running, lukewarm water with a little bit of hand soap.

Earwax, which is inside the eartip, can be removed with a cotton bud.

Rinse off the soap and allow the eartips to dry.

Only reattach the eartips when they are completely dry.

Never use a hairdryer, oven/microwave, heater or fan heater for drying!

Cleaning the earphones:

Only clean the earphones with a soft, lint-free cloth. You can lightly moisten the cloth with lukewarm water. Make sure the cloth is not soaking wet.

Never use solvent-based or aggressive cleaning agents.

If the earwax guard grille is heavily clogged with earwax, the sound will be significantly affected. It is important to allow the earwax to dry before cleaning.

Only when the earwax has dried, the earwax guard grille can be carefully wiped off with a cotton bud or a fine brush.

Hold the earphone so that the nozzle is pointing towards the floor to prevent any loosened earwax from falling into the earphone.

Store the earphones in the supplied case when not in use.

The symbol on the product, in the operating instructions or on the packaging means that electrical and electronic devices must be disposed of separately from household waste at the end of their life cycle.

Always dispose of used equipment in accordance with applicable regulations.

Straight cable, MMCX to 3-pole mini stereo jack (3.5 mm), length 1.4 m… Order # 1001842

Jack adapter 3.5 mm to 1/4″ jack (6.35 mm)… Order # 1002114

Five pairs of silicone eartips (XS, S, M, L, XL)… Order # 1002103

Three pairs of foam eartips (Type ComplyTM Tx-500)

Size S… Order # 728136

Size M… Order # 728144

Size L… Order # 728152

Set of earwax guard grilles… Order # 928542

Storage case… Order # 1002115