BAUHN APVK-1222 (01) PDF Document

The BAUHN APVK-1222 kit includes the following items:

A. Foldable Tripod

B. Condenser Microphone

C. LED Video Light

D. Bluetooth Remote

E. AAA Activ Energy Battery

F. Phone Holder

G. USB-C Charging Cable

H. User Guide

I. Warranty Certificate

Follow these steps to assemble your BAUHN APVK-1222:

1. Set up the tripod to the desired height using the adjustment locks.

2. Screw the phone holder onto the tripod as illustrated in the guide, ensuring it is securely screwed in.

3. Extend the phone holder and slide your phone in. The phone holder will automatically lock and hold your phone in place.

4. Slide the condenser microphone into the LED video light to securely lock it in place.

5. Once the condenser microphone and LED video light are connected, slide the assembly onto the phone holder, ensuring it is securely locked in.

6. Use the handle on the tripod to adjust the angle of your photo or video.

To use the microphone included with the BAUHN APVK-1222 kit:

1. Connect the condenser microphone’s 3.5mm audio cable to your phone’s earphone port.

2. Slide the switch up for phone mode. Slide the switch down for camera mode (your camera must support the 3.5mm MIC input).

3. Note: You will need to purchase a lightning to 3.5mm adaptor for iOS smart phones that do not have an earphone port.

The BAUHN APVK-1222 LED video light is operated using the following steps:

1. Slide the On/Off switch to the On position to turn the LED video light unit on. The power LED indicator will light up blue.

2. Press the Power button to turn the light on or off. The power LED indicator will turn off once the video light is on. Press again to turn off the light and the power LED indicator will light up blue again.

3. Use the arrow buttons to adjust the brightness level.

4. Press the Mode button to change brightness settings.

5. Slide the On/Off switch to the Off position to turn the LED video light unit off. The power LED indicator will also turn off.

To operate the Bluetooth remote for the BAUHN APVK-1222:

1. Slide the On/Off switch to turn the remote on until the LED indicator starts flashing.

2. Turn on your phone’s Bluetooth and select SelfieCom from the list of found devices. Once connected, the LED indicator will stop flashing. Note that the remote will automatically turn off after 5 minutes if not paired.

3. Press the capture button to remotely take a picture.

4. Slide the On/Off switch again to turn the remote off.

The BAUHN APVK-1222 components are charged as follows:

LED Video Light: Connect the supplied USB-C charging cable to the USB-C port on the LED video light. The charging LED indicator will light up red. Once fully charged, the charging LED indicator will light up green.

Remote: Connect the supplied USB-C charging cable to the USB-C port on the remote. The charging LED indicator will light up red. Once fully charged, the charging LED indicator will turn off.

If the BAUHN APVK-1222 Remote is not working:

1. Check that the smart phone is paired with the remote.

2. For Android devices, go to your camera settings and set your volume key as the capture function.

3. The remote control will automatically power off after 10 minutes of inactivity. Press and hold the capture button to turn the remote on again.

4. Charge the remote using the supplied USB-C cable for 2 hours.

If the BAUHN APVK-1222 Condenser Microphone is not working:

1. Check that the switch is on the appropriate mode (phone or camera).

2. Check whether your smart phone or camera supports the microphone power. Insert the supplied AAA battery inside the Microphone battery slot if your smart phone or camera does not support it.

3. For iOS smart phones that do not have earphones, you will need a lightning to 3.5mm adaptor (not included).

If the BAUHN APVK-1222 LED video light is not working:

1. Charge the LED video light using the supplied USB-C cable for 4 hours.

2. Slide the On/Off switch to On to turn the power on.

3. Press the Power button to turn the video light on.

The technical specifications for the BAUHN APVK-1222 are detailed below:

Follow these safety precautions for the BAUHN APVK-1222:

1. Ensure all packaging materials are kept out of reach of babies and young children to prevent suffocation.

2. Only use the power bank in a well-ventilated, clean, and dry environment away from excessive heat or moisture.

3. Keep the product away from direct sunlight, heat sources, and microwaves.

4. In case of damage, do not disassemble, repair, or modify the product yourself.

5. Children should be supervised to ensure they do not play with the product.

6. Do not put any object on top of the product or store it where it can fall into a bath or sink.

7. Clean the product using a dry cloth only; do not use water, chemicals, oils, or organic liquids.

8. Use this appliance only for its intended purpose as described in the guide.