BAUHN ASPBWC-0725 (01) PDF DOCUMENT

The box for the BAUHN ASPBWC-0725 webcam contains:

A. Webcam

B. User Guide

C. Warranty Certificate

The main parts of the BAUHN ASPBWC-0725 webcam are:

1. Microphone

2. Lens

3. Power Indicator

4. Flexible Clip/Base

5. USB Cable

To mount the BAUHN ASPBWC-0725 webcam:

1. Open the flexible clip/base.

2. Mount the webcam on top of your monitor or laptop screen, ensuring the foot on the flexible clip/base is flush with the back of your screen to hold it in position.

3. You can also place the webcam on a flat surface.

To connect the BAUHN ASPBWC-0725 webcam, plug the USB cable into the USB port on your computer. The webcam will automatically install.

The BAUHN ASPBWC-0725 webcam is a plug-and-play device. Once you have connected the USB cable to your computer, the webcam will automatically install. The power indicator will light up when the installation is complete. You can then use the webcam with programs such as Skype. Note that you may need to select the webcam and its built-in microphone in the settings of the specific software you are using.

For optimal performance with your BAUHN ASPBWC-0725 webcam:

• Do not use it in a dusty, damp, or dirty environment.

• Do not use it in a high-temperature environment.

• To ensure picture quality, avoid pointing the webcam lens at a strong light source.

• Make sure the webcam is firmly placed on a stable surface.

If the BAUHN ASPBWC-0725 webcam cannot be detected:

• If you are using a desktop computer, it is recommended to plug the USB cable into the USB port on the back of the computer.

• The USB port on your computer may be loose. Try another USB port.

• The USB cable may be damaged. Try another USB cable.

• The computer is faulty. Try another computer.

If there is no sound from the BAUHN ASPBWC-0725 webcam:

• The webcam is not selected as the audio input device. In your software, select the webcam as the audio input device.

• The webcam microphone is faulty.

If there is no image or video from the BAUHN ASPBWC-0725 webcam:

• The webcam is not selected as the video input device. In your software, select the webcam as the video input device.

• The USB port is loose. Plug in the USB port again.

• The webcam is faulty.

To improve poor video quality from your BAUHN ASPBWC-0725 webcam:

• The webcam is too far from the object. Adjust the distance between the webcam and the object.

• The surrounding light is too dark or too strong. Adjust the surrounding light.

• The network speed is too slow. Wait for the network speed to resume.

For the safety of yourself and others, follow all instructions and take notice of all warnings for the BAUHN ASPBWC-0725 webcam.

Installation: This product should be positioned in a well-ventilated area, on a sturdy, level and stable surface, not exposed to vibrations. Do not place the product on an unstable cart, stand, tripod or table. Any fall of the product may cause serious injury to a person, and serious damage to the product.

Power and connection: To avoid risk of fire or electric shock, do not overload wall outlets and extension cords. If the USB cable becomes damaged, do not use the product. Ensure the cable is fully unwound before use. Do not pull the USB cable to disconnect it from a computer. Disconnect by grasping the USB connector.

Usage conditions and restrictions: This appliance is intended for indoor domestic use only. Do not subject the product to heavy impact or shock, and do not place objects on top of it. Do not attempt to repair, disassemble or modify the appliance yourself.

Cleaning: Unplug the product from the computer before cleaning. Use a soft, dry cloth for cleaning the product; do not use a damp cloth. Never clean with industrial strength polish, wax, benzene, paint thinner, air freshener, lubricant, detergent or other chemicals. Wipe off any moisture, dirt or dust on the USB connector pins with a clean, dry cloth.

Responsible disposal: At the end of its working life, do not throw this product out with your household rubbish. An environmentally friendly method of disposal will ensure that valuable raw materials can be recycled. Electrical and electronic items contain materials and substances which, if handled or disposed of incorrectly, could potentially be hazardous to the environment and human health.