AZATOM ACTIVE X1 (01) PDF MANUAL

AZATOM ACTIVE X1 (01) PDF SUMMARY:

What warnings should I be aware of when using the AZATOM® Active X1?

• Please use and store this product at room temperature.
• Do not expose this product to rain or wet conditions.
• Do not throw and drop this product, avoid damage.
• Do not self-dismantle, repair and transform the product.
• Only charge with a rated voltage charger (DC5V=1A).
• Long time high volume may cause hearing impairment; please adjust the volume appropriately when listening, especially for long time listening.
• Unauthorized dismantlement will void the warranty.
• Improper battery replacement may cause explosion; only replace it with the same or equivalent battery.
• Do not expose the battery to sunlight, fire, or excessive heat.

These warnings are essential for ensuring the safe and proper use of the AZATOM® Active X1 speaker. Following these guidelines will help prevent damage to the product, avoid potential hazards, and maintain the validity of the warranty. Storing the device at room temperature and protecting it from moisture and physical shock will preserve its condition. Using only the specified charger and avoiding prolonged high-volume listening can prevent hearing damage and ensure the battery’s longevity. Additionally, refraining from unauthorized repairs and protecting the battery from extreme temperatures are crucial safety measures.

---

What is included in the packing content?

• Master unit: 1 pc
• USB cable: 1 pc
• 3.5mm audio cable: 1 pc
• Hook: 1pc
• Manual : 1 pc

The packing content lists all the items included with the AZATOM® Active X1 speaker. The master unit is the speaker itself. The USB cable is used for charging and data transfer. The 3.5mm audio cable allows you to connect the speaker to devices without Bluetooth. The hook can be used to hang the speaker. Finally, the manual provides instructions on how to use the speaker.

---

What external interfaces does the product have?

• Micro USB interface
• Micro SD card slot
• AUX external audio interface

These external interfaces provide versatile connectivity options for the AZATOM® Active X1 speaker. The Micro USB interface is used for charging the device and for data transfer, allowing you to connect the speaker to a computer. The Micro SD card slot enables you to play music directly from a Micro SD card, supporting various audio formats. The AUX external audio interface allows you to connect the speaker to other devices, such as MP3 players or older devices without Bluetooth, using a 3.5mm audio cable.

---

What are the features of the speaker?

• Bluetooth 4.2
• Faster data transfer, lower power consumption
• Support one-key to reconnect
• Support Aux In play
• Support NFC
• Support iOS power display
• Support Micro SD card reader data access
• Support Bluetooth hands-free bi-directional conversation
• Built-in 1700mAh lithium battery, built-in intelligent power management module
• Support Micro SD card lossless MP3, WMA, WAV, FLAC, APE format audio playback

These features enhance the functionality and user experience of the AZATOM® Active X1 speaker. Bluetooth 4.2 ensures a stable and efficient wireless connection with lower power consumption. The one-key reconnect feature simplifies the process of reconnecting to previously paired devices. Aux In play allows you to connect devices via a 3.5mm audio cable. NFC support enables quick and easy pairing with NFC-enabled devices. iOS power display lets you monitor the speaker’s battery level on your iOS device. The Micro SD card reader allows you to access data on a Micro SD card. Bluetooth hands-free bi-directional conversation enables you to take calls through the speaker. The built-in lithium battery and intelligent power management module provide long-lasting and efficient power usage. Support for various lossless audio formats ensures high-quality music playback from a Micro SD card.

---

What are the basic parameters of the product?

• Product type: Portable Bluetooth speaker
• Speaker system: 2x Drivers with a combined max output of 18 Watt plus passive sub-woofer
• Volume control mode: Touch the button to adjust
• Bluetooth 4.2
• Storage type: Micro SD card (MAX 32G)
• Power supply: Built-in 1700mAh lithium battery

These basic parameters define the core specifications of the AZATOM® Active X1 speaker. As a portable Bluetooth speaker, it is designed for wireless audio playback on the go. The speaker system includes two drivers with a combined max output of 18 watts, along with a passive subwoofer, providing a balanced and powerful audio experience. The volume can be adjusted via touch button controls. It uses Bluetooth 4.2 for wireless connectivity. It supports Micro SD cards up to 32GB for local music storage. The built-in 1700mAh lithium battery ensures portable power.

---

What are the technical parameters of the product?

• Max Power: 18 Watt
• Frequency response: 110Hz-18KHz
• USB specification: USB2.0, compatible with USB 1.1
• Charging time: DC5V=1A around 3 hours
• Playtime: Up to 12 hours
• File format: MP3, WMA, WAV, APE, FLAC
• Voice call: Bi-directional conversation
• Micro SD card playback: Micro SD card music playback
• Bluetooth play: Yes
• Micro SD card reader: Support data access
• External audio source: Aux In
• Bluetooth connection: One key reconnect
• Power level display: Support iOS/Android power display
• Ringtone: Support ringtone playback

These technical parameters provide detailed specifications about the AZATOM® Active X1 speaker’s performance and capabilities. The max power output is 18 watts, indicating its loudness. The frequency response ranges from 110Hz to 18KHz, defining the range of audio frequencies it can reproduce. It uses USB 2.0, which is compatible with USB 1.1, for charging and data transfer. The charging time is approximately 3 hours with a DC5V=1A charger. A full charge provides up to 12 hours of playtime. It supports various audio file formats, including MP3, WMA, WAV, APE, and FLAC. It supports bi-directional voice calls, Micro SD card playback, and Bluetooth playback. It can also be used as a Micro SD card reader and supports external audio input via Aux In. The speaker features one-key Bluetooth reconnection and power level display for both iOS and Android devices, as well as ringtone playback.

---

What do the keys and components do?

• Previous/VOL-: Press it to switch to the previous track, press and hold it to turn down the volume.
• Next/VOL+: Press it to switch to the next track, press and hold it to turn up the volume.
• Play/Pause: Press it in playing state to play/pause.
• BT: Press and hold it to disconnect the Bluetooth, and press it to connect the last connected Bluetooth device.
• Call: If there is an incoming call in BT state, press this button to answer the call, or press and hold it to reject; during the call, press it to end.
• Mode: Press it to switch among BT, Micro SD card AUX.
• Power: Same as the Mode button; press and hold for 2 seconds to turn on/off.

These keys and components control various functions of the AZATOM® Active X1 speaker. The Previous/VOL- button allows you to navigate to the previous track with a short press and decrease the volume with a long press. The Next/VOL+ button advances to the next track with a short press and increases the volume with a long press. The Play/Pause button starts or pauses the music playback. The BT button disconnects the current Bluetooth connection when held down and reconnects to the last paired device with a short press. The Call button answers incoming calls in Bluetooth mode with a short press, rejects calls with a long press, and ends ongoing calls with a short press. The Mode button switches between Bluetooth, Micro SD card, and AUX input modes. The Power button, which also functions as the Mode button, turns the speaker on or off when held down for 2 seconds.

---

How do I turn the speaker on and off?

Press and hold the power button for 2 seconds to turn on the speaker. The speaker makes a ding dong sound, and the blue LED starts flashing. Press and hold for 2 seconds again to turn off the speaker.

To power the AZATOM® Active X1 speaker on or off, simply press and hold the power button located on the device for 2 seconds. When turning the speaker on, you will hear a “ding dong” sound, and the blue LED indicator will begin to flash. To turn the speaker off, repeat the same process: press and hold the power button for 2 seconds until the speaker shuts down.

---

How do I connect to Bluetooth?

Turn on Bluetooth on the mobile phone, tablet PC, or other devices, search for Bluetooth device “Active X1”, and then tap Connect to confirm. If necessary, type “0000” and tap OK to connect. The Bluetooth speaker will connect to the last paired device automatically when turned on.

To connect the AZATOM® Active X1 speaker to a device via Bluetooth, first ensure that Bluetooth is enabled on your mobile phone, tablet PC, or other device. Next, search for available Bluetooth devices; the speaker should appear as “Active X1” in the list. Tap “Connect” to initiate the pairing process. If prompted for a code, enter “0000” and tap OK. Once successfully paired, the speaker will automatically connect to the last paired device when turned on.

---

How do I disconnect a Bluetooth device?

When the speaker and the device are connected, press and hold the BT button to disconnect the Bluetooth connection, accompanied by a thud sound; the speaker is available for connection now, and the blue LED starts flashing.

To disconnect a Bluetooth device from the AZATOM® Active X1 speaker, locate the BT button on the speaker. When the speaker is connected to a device, press and hold the BT button. You will hear a “thud” sound, and the blue LED will start flashing, indicating that the Bluetooth connection has been disconnected and the speaker is now available for pairing with a new device.

---

How do I reconnect Bluetooth?

When the Bluetooth is disconnected, tap the BT button to connect to the last paired device, and tap the play button to play the last song.

After disconnecting Bluetooth on the AZATOM® Active X1 speaker, you can reconnect to the last paired device by simply tapping the BT button. Once the connection is re-established, tap the play button to resume playing the last song. This feature allows for quick and easy reconnection to your preferred device without needing to go through the full pairing process again.

---

How do I use True Wireless Stereo?

1. Power on Speaker A and speaker B (no need at the same time).
2. Press the BT button on A or B.
3. If you notice that it had a machine sound of deng, release the press. At this time, the two speakers are trying to connect, both blue LEDs flickering, then, after the deng deng sound, it means the two speakers connected each other, the blue LED stays.
4. Use the Bluetooth device to connect one of the speakers, the pairing name is Active X1. After having connected, you can play the two speakers (A & B) at the same time.
   • Press the keys of either speaker A or speaker B, it can control two speakers at the same time (including volume up/down, next/previous song, power off, etc.).
   • At the moment of two speakers connecting, if you press the BT button on A, then A is the master speaker, it’s the left channel, B is the right channel for speaker B, vice versa.

To use the True Wireless Stereo (TWS) function with two AZATOM® Active X1 speakers, begin by powering on both Speaker A and Speaker B. You don’t need to power them on simultaneously. Next, press the BT button on either Speaker A or Speaker B. Listen for a “deng” sound; once you hear it, release the button. The blue LEDs on both speakers will start flickering, indicating that they are attempting to connect to each other. Once they successfully connect, you will hear a “deng deng” sound, and the blue LEDs will remain steady. Finally, use your Bluetooth device to connect to one of the speakers; it will appear as “Active X1” in the list of available devices. Once connected, audio will play through both speakers simultaneously. You can control both speakers using the keys on either Speaker A or Speaker B, including adjusting the volume, skipping tracks, and powering them off. If you press the BT button on Speaker A during the connection process, Speaker A will become the master speaker and play the left audio channel, while Speaker B will play the right channel, and vice versa.

---

How do I use NFC quick pairing?

1. Enter to the Bluetooth mode: Turn on the speaker, and it will voice “Bluetooth mode,” the BT indicator white light will start to quick blinking.
2. Turn on the NFC (Near field communication) function on your devices, like smartphones, tablets, etc.
3. Then post your device on the left side of the speaker: NFC area.
4. It will appear “Are you ready to pair Active X1”, please select yes, it will connect in a few seconds with the voice of “connected”, then play your music.

To use NFC quick pairing with the AZATOM® Active X1 speaker, first, turn on the speaker to enter Bluetooth mode. The speaker will announce “Bluetooth mode,” and the BT indicator white light will start blinking rapidly. Next, enable the NFC function on your smartphone, tablet, or other compatible device. Then, bring your device close to the NFC area on the left side of the speaker. A prompt will appear on your device asking, “Are you ready to pair Active X1?”. Select “Yes” to confirm. The devices will connect in a few seconds, and you will hear a “connected” voice prompt. After successful pairing, you can begin playing music.

---

How do I play music on a Micro SD card?

1. Insert a Micro SD card and turn on the device. Insert a Micro SD card with music files into the card slot, press and hold the Power button to turn on the speaker, accompanied by a ding-dong sound.
2. Switch to Micro SD card music mode. Press the Mode switch button, and the speaker will make a dong-dong sound and play the music files on the Micro SD card.

Note: BT is the default mode of the Bluetooth speaker; if you want to play music on a Micro SD card, switch to Micro SD card mode first; if the speaker is turned on, the files on the Micro SD card will be played automatically when the card is inserted.

To play music from a Micro SD card on the AZATOM® Active X1 speaker, first, insert the Micro SD card containing your music files into the card slot. Then, press and hold the Power button to turn on the speaker; you will hear a “ding-dong” sound. Next, press the Mode switch button to switch to Micro SD card music mode. The speaker will make a “dong-dong” sound and begin playing the music files stored on the Micro SD card. Note that Bluetooth (BT) is the default mode, so you must switch to Micro SD card mode to play music from the card. If the speaker is already on when you insert the Micro SD card, it will automatically start playing the files.

---

How do I use the hands-free call feature?

When the speaker is connected to your smartphone, if there is an incoming call, the music will pause and the “dudu” sound is ring, press the BT button to answer the call and press it again to end the call; or press and hold the BT button to reject the call.

To use the hands-free call feature on the AZATOM® Active X1 speaker, ensure that the speaker is connected to your smartphone via Bluetooth. When you receive an incoming call, the music will pause, and you will hear a “dudu” sound. Press the BT button to answer the call. To end the call, press the BT button again. If you wish to reject the call, press and hold the BT button.

---

How do I use external audio playing?

1. Connect to the speaker with an audio cable.
2. Press and hold the Power button to turn on the speaker, insert the audio cable after the ding-dong sound, and press the Mode switch button to switch to Aux In mode; you can also insert the audio cable in the power-on state to realize plug and play.

To use the external audio playing feature on the AZATOM® Active X1 speaker, first, connect the speaker to your audio source using a 3.5mm audio cable. Press and hold the Power button to turn on the speaker; you will hear a “ding-dong” sound. Then, press the Mode switch button to switch to Aux In mode. Alternatively, you can insert the audio cable while the speaker is already powered on to automatically activate the plug-and-play function.

---

How do I enter card reader/charging mode?

1. Copy music: Turn off the speaker, insert the Micro SD card, connect the speaker to PC with the USB cable via Micro USB interface, and press the Power button to enter card reader mode, and then you can copy music files to the Micro SD card.
2. Charging the speaker: You can connect the speaker to PC with the provided USB cable and charge the speaker no matter it’s power on/off. It is recommended to buy a separate DC5V=1A USB charger or other DC5V=1A charger for mobile phones and charge the speaker through an indoor outlet.

Tip: Please charge the speaker first if it hasn’t been used for a long time.

To enter card reader/charging mode on the AZATOM® Active X1 speaker, follow these steps:

1. Copying Music: First, turn off the speaker and insert the Micro SD card into the card slot. Connect the speaker to your PC using the USB cable via the Micro USB interface. Press the Power button to enter card reader mode, which will allow you to copy music files to the Micro SD card.
2. Charging the Speaker: Connect the speaker to your PC using the provided USB cable. The speaker can be charged whether it is powered on or off. For faster charging, it is recommended to use a separate DC5V=1A USB charger or another DC5V=1A charger for mobile phones and plug it into an indoor outlet.

If the speaker hasn’t been used for a long time, it’s advisable to charge it fully before use.

---

What should I do if pairing failed repeatedly?

1. Turn off the speaker and restart it.
2. If your device requires a code, type 0000.

If you experience repeated pairing failures with the AZATOM® Active X1 speaker, first, try turning off the speaker and then restarting it. If your device prompts you for a code during the pairing process, enter “0000”.

---

What should I do if the music play is interrupted?

1. Check if the device is out of effective range, or if there is a barrier between the speaker and the device.

If the music playback is interrupted while using the AZATOM® Active X1 speaker, check whether the device is within the effective range of the speaker. Also, ensure that there are no obstructions or barriers between the speaker and the device, as these can interfere with the Bluetooth connection.

---

What should I do if there is a Micro SD card error?

1. Check if the Micro SD card format is proper (speaker supports FAT32 format).
2. Check if the file formats of the Micro SD card are WAV, WMA, MP3, APE, or FLAC.

If you encounter a Micro SD card error while using the AZATOM® Active X1 speaker, first verify that the Micro SD card is formatted correctly. The speaker supports the FAT32 format. Also, ensure that the audio files on the Micro SD card are in a supported format, such as WAV, WMA, MP3, APE, or FLAC.

---

What should I do if there is no sound during playing?

1. Check if the speaker volume is adjusted properly.
2. Check if the speaker is muted or paused.

If there is no sound during playback on the AZATOM® Active X1 speaker, first, check that the speaker volume is set appropriately and not too low. Also, verify that the speaker is not muted or paused.

---

What should I do if the speaker can’t be turned on or there is no reaction?

1. Restart the speaker, use the reset function.

If the AZATOM® Active X1 speaker cannot be turned on or is not responding, try restarting the speaker by using the reset function.