AT&T SAMSUNG GALAXY S8 (01) PDF MANUAL

Bixby responds to your voice commands and can help you understand your settings and set up your Samsung device.

Use your face, fingerprint, or iris to unlock your device.

Configure facial recognition security to add an extra layer of security when using your device.

Use your fingerprint as an alternative to entering passwords in certain apps. You can also use your fingerprint to verify your identity when logging in to your Samsung account.

Use iris recognition as an alternative to entering passwords in certain apps. You can also use your eyes to verify your identity when logging in to your Samsung account.

This device is rated IP68 using the Ingress Protection rating system.

• Turns off the screen and disables touch functionality during a call when the device is in close proximity to the body.

• Turns the screen back on and enables touch functionality during a call when the device is outside a specific range from the body.

• Press to turn the screen on or off.

• Press and hold to select a power control option.

• Press twice quickly to launch the camera.

• Adjust the volume for ringtones, media, notifications, and system sounds.

• In the camera app, press a volume key to take a photo.

Launch Bixby.

1. Insert the removal tool into the hole on the SIM card/Memory card tray, and then push until the tray pops out.

2. Place the SIM card on the tray with the gold contacts facing down.

3. Place the memory card on the tray with the gold contacts facing down.

4. Slide the SIM card/Memory card tray back into the slot.

Warning: Small components such as SIM cards and memory cards can pose a choking risk. Please be careful when handling these cards to avoid damaging them.

You can install an optional microSD™ memory card (not included) to add more memory space to your device. A memory card can be installed at any time. It is not necessary to install it prior to using the device.

Caution: Be careful when using the removal tool to eject an internal card tray.

1. Insert the USB Type-C cable into the USB charger/Accessory port.

2. Connect the USB cable to the charging head, and then plug the charging head into a standard outlet.

3. Unplug the charging head from the outlet and remove the USB cable from the device when charging is complete.

Note: You should dry the inside of the charging port before inserting a power connector to charge your device. If the charging port is not fully dry, your device may operate abnormally. For example, it may charge more slowly or overheat.

The battery comes partially charged. You can use the device while charging.

Caution: Use only charging devices that are approved by Samsung. Samsung accessories are designed for your device to maximize battery life. Using other accessories may void your warranty and may cause damage.

You can use a Micro-USB cable to connect your device to a computer with the included Micro-USB connector.

Note: The Micro-USB connector does not support On-the-Go USB accessories.

While charging, the device and the charger may become hot and stop charging. This usually does not affect the device’s lifespan or performance and is in the device’s normal range of operation. Disconnect the charger from the device and wait for the device to cool down.

To turn the device on:

Press and hold the Power key until the device turns on.

To turn the device off:

1. Press and hold the Power key.

2. Tap Power off, and confirm when prompted.

The first time you turn your device on, the Setup Wizard guides you through the basics of setting up your device. Follow the prompts to choose a default language, connect to a Wi-Fi network, set up accounts, choose location services, learn about your device’s features, and more.

Use your device’s screen lock features to secure your device. By default, the device locks automatically when the screen times out.

To lock the device:

Press the Power key.

To unlock the device:

Press the Power key, or double-tap or touch and hold Home, and then drag your finger across the screen.

The default Screen lock on your device is Swipe.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Cloud and accounts > Accounts.

3. Tap + Add account > Google.

Note: When you sign in to a Google account, Factory Reset Protection (FRP) is activated. FRP requires your Google account information when resetting to factory settings.

Create a Samsung account for access to Samsung content and apps on your device.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Cloud and accounts > Accounts.

3. Tap + Add account > Samsung account.

Note: To quickly access your Samsung account, tap Settings > Samsung account.

View and manage all of your email accounts.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Cloud and accounts > Accounts.

3. Tap + Add account > Email.

Use Smart Switch™ to transfer contacts, photos, and other content from your old device. You can also use the included On-the-Go adapter to transfer content quickly and easily from your old device without installing the Smart Switch app.

Note: The USB option must be set to Media device (MTP) on the other device. Transferring content with a USB cable may increase battery consumption. Make sure your battery is fully charged.

1. From a Home screen, swipe up to access Apps, and then tap Settings > Cloud and accounts > Smart Switch.

2. Follow the prompts and select the content to transfer.

You can access your voicemail from a Home screen.

1. From a Home screen, tap Phone.

2. Tap Voicemail.

3. Follow the tutorial to create a password, record a greeting, and record your name.

Lightly tap items to select or launch them.

• Tap the keyboard to enter characters or text.

• Tap an item to select it.

• Tap an app shortcut to launch the app.

Lightly tap items twice to select or launch them.

• Double-tap an image to zoom in or out.

Touch and hold items to activate them.

• Touch and hold a field to display a pop-up menu of options.

Lightly drag your finger vertically or horizontally across the screen.

• Swipe the screen to unlock the device.

• Swipe the screen to scroll through the Home screens or menu options.

Touch and hold an item, and then move it to a new location.

• Drag an app shortcut to add it to a Home screen.

• Drag a widget to place it in a new location on a Home screen.

Pinch the screen using your thumb and forefinger or spread by moving your fingers apart.

• Pinch the screen to zoom out while viewing a picture or a web page.

• Spread your fingers on the screen to zoom in while viewing a picture or a web page.

The device uses basic command options to perform common actions.

• More options: Tap to view more menu options for a screen.

• Delete: Tap to select items to delete.

• Share: Tap to select items to share, and then choose a sharing method.

• Edit: Tap to customize the screen.

• On/Off: Tap to turn the option on or off.

• Menu: Tap to view available options for the field.

The navigation keys are hidden in full screen mode. When hidden, you can still use Home by touching and holding the area of the screen where the icon is normally displayed.

To enter or exit full screen mode:

Double-tap the Hide/Show icon to the left of the navigation keys.

To view the navigation keys in full screen mode:

Swipe up from the bottom of the screen to display the Navigation bar.

You can configure the Navigation bar background color and button layout.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Display > Navigation bar for the following settings:

• Show and hide button: Add a button on the left side of the navigation bar to show or hide the Navigation bar.

• Background color: Choose a color for the background of the Navigation bar.

• Hard press Home button: Adjust the amount of pressure needed to touch and hold Home by moving the slider.

• Unlock with Home button: Touch and hold Home while the screen is off to skip the Lock screen and go directly to the Home screen.

• Button layout: Choose the order of the navigation keys.

Your device has multiple Home screens to hold app shortcuts and widgets. You can add, remove, change the order of screens, as well as choose a different main Home screen.

1. From a Home screen, pinch the screen.

2. Use these options to manage screens:

• To align shortcuts into a line at the top of a screen, tap Align top.

• To align shortcuts into a line at the bottom of a screen, tap Align bottom.

• To remove a Home screen, tap Remove.

• To set a screen as the main Home screen, tap Main. This screen is displayed when you tap Home.

• To change the order of screens, touch and hold a screen, and then drag it to a new position.

• To add a screen, swipe to the end of the screens, and then tap + Add.

• To enable Bixby Home, swipe right, and then tap On/Off.

You can use app shortcuts to launch an app from any Home screen.

1. From a Home screen, swipe up to access Apps.

2. Touch and hold an app shortcut to open the options menu.

3. Tap + Add to Home.

To remove a shortcut:

1. Touch and hold an app shortcut to open the options menu.

2. Tap Remove from Home.

• Removing a shortcut does not delete the app, it just removes the shortcut from a Home screen.

To move a shortcut from one Home screen to another:

1. Touch and hold an app shortcut to release it.

2. Drag the app shortcut to a new Home screen, and then release it.

You can organize App shortcuts in folders on an Apps list screen and Home screen.

Change the look of the Home and Lock screens with wallpaper. You can display a favorite picture or choose from preloaded wallpapers.

1. From a Home screen, pinch the screen.

2. Tap Wallpapers to customize.

3. Tap View all to see all available wallpapers.

4. Tap an image to choose it.

• Infinity wallpapers are applied to all screens.

• Other wallpapers prompt you to select which screen you want to use it for.

• If available, tap Motion effect to add movement to your screens.

5. Tap Set as wallpaper, and confirm when prompted.

Set the theme to be applied to your Home and Lock screens, wallpapers, and app icons.

1. From a Home screen, pinch the screen.

2. Tap Themes to customize.

• Tap a theme to preview and download it to My themes.

3. Tap View all to see downloaded themes.

4. Tap a theme, and then tap Apply to apply the selected theme.

Apply custom icons to replace built-in app icons.

1. From a Home screen, pinch the screen.

2. Tap Wallpapers > Icons to customize.

3. Tap an icon set to preview and download it to My icons.

• Tap View all to see downloaded icons.

4. Tap an icon, and then tap Apply to apply the selected icon set.

You can show icons with shaded frames to make them stand out on the Home screen and Apps list screen.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Display > Icon frames and choose one of the following options:

• Icons only: Show icons only.

• Icons with frames: Show icons with shaded frames.

3. Tap Done, and confirm when prompted.

Widgets are simple application extensions that run on a Home screen.

To add a widget to a Home screen:

1. From a Home screen, pinch the screen.

2. Tap Widgets.

3. Touch and hold a widget, drag it to a Home screen, and release it.

To remove a widget from a Home screen:

1. From a Home screen, touch and hold a widget to open the options menu.

2. Tap Remove from Home screen.

Customize your Home and Apps screens.

1. From a Home screen, pinch the screen.

2. Tap Home screen settings to customize:

• Home screen layout: Set your device to have a Home and Apps screen, or only a Home screen where all apps are located.

• Home screen grid: Choose a dimension option to determine how icons are arranged on the Home screen.

• Apps screen grid: Choose a dimension option to determine how icons are arranged on the Apps screen.

• Apps button: Add an apps button to the Home screen for easy access to the Apps screen.

• App icon badges: Select how to show icon badges when apps receive notifications.

• Add apps to Home screen: Automatically add newly downloaded apps to the Home screen.

• Quick-open notification panel: Enable this feature to open the Notification panel from the Home screen by swiping down.

• Hide apps: Select apps to hide.

• About Home screen: View version information.

Switch between the default screen layout and a simpler layout. The Easy mode layout has larger text and icons, making for a more straightforward visual experience.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Display > Easy mode.

3. Tap Easy mode to enable this feature.

4. Tap Apply to confirm.

To disable Easy mode:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Display > Easy mode > Standard mode.

3. Tap Apply to exit Easy mode.

Battery full

Battery low

Battery charging

Vibrate mode

Mute mode

4G LTE™ active

Signal strength

Network not available

Wi-Fi active

Location service active

Missed call

Call in progress

Call on hold

New email

New voicemail

New message

File download in progress

File upload in progress

Wi-Fi available

App updates available

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Display > Status bar.

• Tap Show recent notifications only to display only the three most recent notification icons on the Status bar.

• Tap Show battery percentage to display the battery charge percentage next to the battery icon on the Status bar.

You can access the Notification panel from any screen.

1. Drag the Status bar down to display the Notification panel.

2. Swipe down the list to see notification details.

• To open an item, tap it.

• To clear a single notification, drag the notification left or right.

• To clear all notifications, tap Clear.

3. Drag upward from the bottom of the screen or tap Back to close the Notification panel.

You can also open or close the Notification panel by swiping up or down on the fingerprint sensor.

To enable this feature:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Advanced features > Finger sensor gestures.

3. Tap On/Off to enable this feature.

The Notification panel also provides quick access to device functions, allowing you to quickly turn them on or off.

1. Drag the Status bar down to display the Notification panel.

2. Drag View all downward.

• Tap a setting to turn it on or off.

• Tap More options to reorder Quick settings or to change the button layout.

3. Drag View all upward to close Quick settings.

Edge panels can be used to access apps, tasks, and contacts, as well as view news, sports, and other information on the Edge screen.

From any screen, drag the Edge panel handle to the center of the screen. Swipe left or right to view other panels.

To configure Edge panels:

1. From any screen, drag the Edge panel handle to the center of the screen, and then tap Edge panel settings.

2. Tap On/Off to enable the feature. The following options are available:

• Checkbox: Enable or disable each panel.

• Edit (if available): Configure individual panels by tapping.

• Download: Search for and download more Edge panels from Galaxy Apps.

• More options > Reorder: Change the order of the panels by dragging them to the left or right.

• More options > Uninstall: Remove an Edge panel from your device.

• More options > Edge panel handle:

– Move: Drag to change the position of the Edge panel handle along the edge of the screen.

Following from configuring Edge panels:

– Position: Choose either Right or Left to set which side the Edge screen displays on.

– Move from any screen: Touch and hold the Edge panel handle to change its position from any screen.

– Size: Drag the slider to adjust the size of the Edge panel handle.

– Transparency: Drag the slider to adjust the transparency of the Edge panel handle.

3. Tap Back to save changes.

You can add up to ten apps in two columns to the Apps edge panel.

1. From any screen, drag the Edge panel handle to the center of the screen. Swipe until the Apps edge panel is displayed.

2. Tap an app or app pair to open it.

To configure Apps edge:

1. From any screen, drag the Edge panel handle to the center of the screen. Swipe until the Apps edge panel is displayed.

2. Tap + Add app to add other apps to the Apps edge.

• To add an app to the Apps edge, find it on the left side of the screen and tap it to add it to an available space on the right column.

• To create a shortcut for two apps to open in Multi window™, tap Create app pair.

• To create a folder shortcut, drag an app from the left side of the screen on top of an app in the columns on the right.

• To change the order of the apps on the Edge panel, drag each app to the desired location.

• To remove an app, tap Remove.

3. Tap Back to save changes.

People edge allows you to quickly communicate with contacts in your My people list.

1. From any screen, drag the Edge panel handle to the center of the screen. Swipe until the People edge panel is displayed.

2. Tap a contact, and tap Call or Message.

To configure People edge:

1. From any screen, drag the Edge panel handle to the center of the screen. Swipe until the People edge panel is displayed.

2. Tap Add contact.

• To add a contact, tap Select contacts.

• To remove a contact, tap Remove.

• To change the order of the contacts, drag each contact to the desired location.

3. Tap Back to save changes.

The Smart select feature captures an area of the screen as an image or animation that you can share or pin to the screen.

1. From any screen, drag the Edge panel handle to the center of the screen. Swipe until the Smart select panel is displayed.

2. Tap a Smart select tool to use:

• Rectangle: Capture a rectangular area of the screen.

• Oval: Capture an oval area of the screen.

• Animation: Record activity on the screen as an animated GIF.

• Pin to screen: Capture an area and pin it to the screen.

Set the Edge screen to light up when you receive calls or notifications while the device is turned over.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Display > Edge screen > Edge lighting.

3. Tap On/Off to enable the feature.

4. Choose one of the following options:

• When screen is on: Show Edge lighting only when the screen is on.

• When screen is off: Show Edge lighting only when the screen is off.

• Always: Show Edge lighting at all times.

Customize the color, width, and transparency of the Edge lighting feature.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Display > Edge screen > Edge lighting.

3. Tap Edge lighting style to customize:

• Effect: Choose an edge effect.

• Color: Choose a preset or custom color, and enable app colors.

• Transparency: Drag the Transparency slider to adjust the transparency of the Edge lighting.

• Width: Drag the Width slider to adjust the width of the Edge lighting.

4. Tap Apply when finished.

Choose which notifications will light up the Edge screen.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Display > Edge screen > Edge lighting.

3. Tap Manage notifications to choose the apps that can activate Edge lighting when a notification is received.

Reject an incoming phone call with a text message by placing your finger on the heart rate sensor for two seconds. The call is rejected, and a preset message is sent to the caller.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Display > Edge screen.

3. Tap Edge lighting > More options > Quick reply.

• To edit the text reply, tap the default message.

You can view the current software version and license information for the Edge screen feature.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Display > Edge screen > About Edge screen.

The Bixby Home page displays customized content based on your interactions. Bixby learns from your usage patterns and will suggest content you may like.

From a Home screen, swipe right.

– or –

Press the Bixby key.

Bixby Vision is available on the Camera viewfinder to help understand what you see.

1. From a Home screen, swipe up to access Apps.

2. Tap Camera > Bixby Vision and follow the prompts.

Bixby Vision can be used on pictures and images saved in the Gallery app.

1. From a Home screen, swipe up to access Apps.

2. Tap Gallery, and then tap a picture to view it.

3. Tap Bixby Vision and follow the prompts.

Bixby Vision can help you find out more about an image you find in the Internet app.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Internet.

3. Touch and hold an image until a pop-up menu is displayed.

4. Tap Bixby Vision and follow the prompts.

View missed calls and message alerts, check the time and date, and view other customized information without unlocking your device.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > Always On Display.

3. Tap On/Off to enable the feature, and then set the following options:

• Content to show: Choose to show Home button and clock, Clock, or Home button.

• Show always: Enable to show the Always On Display at all times.

– Set schedule: If Show always is disabled, then set a schedule for when to start and end Always On Display.

• About Always On Display: View the current software version and license information.

Some display settings can appear on both the Lock screen and Always On Display (AOD).

1. From a Home screen, pinch the screen.

2. Tap Wallpapers > AOD to customize.

• Tap an AOD to preview and download it to My Always On Display.

3. Tap View all to see downloaded AODs.

4. Tap an AOD, and then tap Apply to apply the selected AOD.

To use your face to unlock your device, you must set a pattern, PIN, or password.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > Face recognition.

3. Follow the prompts to register your face.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > Face recognition for the following options:

• Remove face data: Delete existing faces.

• Samsung Pass: Access your online accounts using face recognition.

• Face unlock: Enable or disable face recognition security.

• Face unlock when screen turns on: Unlock your device with face recognition as soon as the screen turns on.

• Faster recognition: Turn on for faster face recognition. Turn off to increase security and make it harder to unlock using an image or video of your likeness.

Register your irises for identity verification.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > Iris scanner.

3. Follow the prompts to register your irises.

Note: To register just one of your eyes, tap the link on the setup screen to register one iris.

Note: The Iris scanner is not intended to be used as a medical device and the biometric data collected and stored locally by the mechanism is not intended to be used for any diagnostic, therapeutic, or preventative purposes. Please follow all instructions for use of this feature.

Iris verification can be used for other accounts accessed from your device.

To access the Iris scanner:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > Iris scanner.

The following options are available under Iris scanner:

• Remove iris data: Delete existing irises.

• Preview screen mask: Choose a mask to display when using the iris scanner.

• Samsung Pass: Use your irises for identification when using supported apps.

• Samsung Pay: Use your irises to make payments quickly and securely.

• Iris unlock: Enable to unlock the device using your irises.

• Iris unlock when screen turns on: Unlock your device with your irises as soon as the screen turns on.

• Tips for using iris recognition: View a tutorial on how to use the iris scanner.

Use fingerprint recognition as an alternative to entering passwords in certain apps. You can also use your fingerprint to verify your identity when logging in to your Samsung account.

To use your fingerprint to unlock your device, you must set a pattern, PIN, or password. You can register up to three fingerprints.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > Fingerprint scanner.

3. Follow the prompts to register your fingerprint.

You can add, delete, and rename fingerprints.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > Fingerprint scanner for the following options:

• To rename a fingerprint, tap the fingerprint, enter a new name, and then tap Rename.

• To add a fingerprint, tap + Add fingerprint and follow the prompts to register a fingerprint.

• To delete a fingerprint, touch and hold the fingerprint, and then tap Remove.

Use fingerprint recognition to verify your identity in supported apps and actions.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > Fingerprint scanner for the following options:

• Samsung Pass: Use your fingerprint for identification when using supported apps.

• Samsung Pay: Use your fingerprints to make payments quickly and securely.

• Fingerprint unlock: Use your fingerprint for identification when unlocking your device.

Multitask by using two apps at the same time. Apps that support Multi window can be displayed together on a split screen. You can switch between the apps and adjust the size of their windows.

1. From any screen, touch and hold Recent apps.

2. Tap Multi window in the title bar to launch an app in split screen view.

• Recently opened apps are displayed in the lower window. Apps that support Multi window have the Multi window icon in their title bar.

• If there are no recently opened apps that support Multi window, or if you want to launch a different app, tap App list.

3. Tap an app in the lower window to add it to the split screen view.

The Window controls modify the way app windows are displayed in split screen view.

Tap the middle of the window border for the following options:

• Add app pair on Home screen: Add the open pair of apps as a shortcut to the Home screen.

• Snap window: Choose an area of the selected app to snap to the top of the screen.

• Switch windows: Swap the two windows.

• Open in pop-up view: Open the selected app in a pop-up window.

• Close app: Close the selected app.

Additional features are available for Multi window.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Advanced features > Multi window, and then tap On/Off to enable each of the following options:

• Use Recents button: Touch and hold Recent apps to either put the app into split screen view or dock the open app at the top of the screen. While in Multi window view, touch and hold Recent apps to close the app on the bottom.

• Pop-up view action: Swipe down diagonally from either the right or left top corner of the screen to put the app into pop-up view.

Text can be entered using a keyboard or your voice.

Tap a field to display the Samsung keyboard.

• Tap Show predictive text to view suggested words while you type.

• Tap Show toolbar functions to view all keyboard options.

The toolbar provides additional helpful functions.

From the Samsung keyboard, tap Expand toolbar for the following options:

• Emoji: Insert an emoji.

• Voice input: Use Samsung voice input.

• Settings: Access keyboard settings.

• Clipboard: Access the clipboard.

• One-handed keyboard: Change the keyboard layout for use with one hand.

Set customized options for the Samsung keyboard.

From the Samsung keyboard, tap Settings for the following options:

• Languages and types: Set the keyboard type and choose which languages are available on the keyboard.

– To switch between languages, slide the Space bar sideways.

• Smart typing: Use predictive text and auto-correction features to prevent common typing mistakes. Type by swiping between letters.

• Keyboard layout and feedback: Configure the keyboard toolbar, change keyboard size and colors for visibility, adjust layout, and choose key-tap feedback.

• Reset to default settings: Return keyboard to original settings and clear personalized data.

• About Samsung keyboard: View version and legal information for the Samsung keyboard.

Instead of typing, enter text by speaking.

1. From the Samsung keyboard, tap Voice input.

2. Tap the screen and speak your text.

Set customized options for Samsung voice input.

1. From the Samsung keyboard, tap Voice input.

2. Tap Settings for options.

• Keyboard language: Choose the language for the keyboard.

• Voice input language: Select the language for Samsung voice input.

• Hide offensive words: Hide potentially offensive words with asterisks.

Use Emergency mode to access helpful emergency features and conserve your device’s power during an emergency situation.

To save battery power, Emergency mode:

• Restricts application usage to only essential applications and those you select.

• Turns off connectivity features and Mobile data when the screen is off.

To activate Emergency mode:

1. Press and hold the Power key.

2. Tap Emergency mode.

• When accessing for the first time, read and accept the terms and conditions.

3. Tap Turn on.

While in Emergency mode, only the following apps and features are available on the Home screen:

• Flashlight: Use the device’s flash as a steady source of light.

• Emergency alarm: Sound an audible siren.

• Share my location: Send your location information to your emergency contacts.

• Phone: Launch the call screen.

• Internet: Launch the web browser.

• Add: Add other available apps.

– Email: Launch the Email app.

– Facebook: Launch the Facebook app.

– Maps: Launch Google Maps.

• Battery charge: Display estimated battery charge remaining.

• Estimated usage time remaining: Display estimated standby time that can be reached based on current battery charge and usage.

• Emergency call: Dial the emergency telephone number (for example, 911). This kind of call can be made even without activated cellular service.

• More options:

– Turn off Emergency mode: Disable Emergency mode and return to standard mode.

– Remove: Choose apps to remove from the screen.

– Manage emergency contacts: Manage your medical profile and ICE (In Case of Emergency) group contacts.

– Settings: Configure the available settings. Only a limited number of settings are enabled in Emergency mode.

When emergency mode is turned off, the device returns to standard mode.

1. Press and hold the Power key.

2. Tap Emergency mode.

Note: When Emergency mode is activated, Locating method is set to Battery saving. After Emergency mode is turned off, check your location settings.

The Apps list displays all preloaded and downloaded apps. You can uninstall, disable, or hide apps from view.

To access and launch all apps from the Apps list:

1. From a Home screen, swipe up or down to access Apps.

2. Tap an app’s shortcut to launch it.

• To return to the main Home screen, tap Home.

In addition to swiping to access apps, you can add an Apps button to the Home screen.

1. From a Home screen, swipe up to access Apps.

2. Tap More options > Home screen settings > Apps button.

3. Tap Show Apps button > Apply.

If you are not sure exactly where to find a certain setting, you can use the Search feature.

1. From a Home screen, swipe up to access Apps.

2. Tap Search phone.

3. Enter a word or words in the Search phone field. As you type, apps that match are displayed on the screen.

4. Tap an entry to go to that app.

• To customize the Finder search settings, tap More options > Settings.

Uninstall or disable apps you have downloaded.

1. From a Home screen, swipe up to access Apps.

2. Touch and hold an app to open the options menu.

• To uninstall an app, tap Uninstall.

• To disable an app, tap Disable.

Note: Some preloaded apps can only be disabled, not uninstalled. Apps that are disabled are turned off and hidden from view.

View and download Samsung apps that are optimized for use with Galaxy devices.

1. From a Home screen, swipe up to access Apps.

2. Tap More options > Galaxy Essentials.

App shortcuts can be listed alphabetically or in your own custom order.

1. From a Home screen, swipe up to access Apps.

2. Tap More options > Sort.

• Custom order: Arrange apps manually.

– To remove empty spaces between apps, tap More options > Clean up pages.

• Alphabetical order: Sort apps alphabetically.

Create a folder to organize App shortcuts on an Apps list screen.

1. From a Home screen, swipe up to access Apps.

2. Touch and hold an app shortcut, and then drag it on top of another app shortcut until it is highlighted.

3. Release the app shortcut to create the folder.

• Enter folder name: Name the folder.

• Palette: Change the folder color.

• Add apps: Place more apps in the folder. Tap apps to select them, and then tap Add.

4. Tap Back to close the folder.

Create a folder and copy it to a Home screen.

1. From a Home screen, swipe up to access Apps.

2. Touch and hold a folder to open the options menu.

3. Tap Add to Home.

When you delete a folder, the app shortcuts are returned to the Apps list screen.

1. From a Home screen, swipe up to access Apps.

2. Touch and hold a folder to delete.

3. Tap Delete folder, and confirm when prompted.

Manage your downloaded and preloaded apps.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Apps.

3. Tap Menu to set which apps to view, and then choose All apps, Enabled, or Disabled.

4. Tap More options for the following options:

• Sort by size/name: Sort the apps by size or name.

• Default apps: Choose or change apps that are used by default for certain features, like email or browsing the Internet.

• App permissions: Control which apps have permissions to use certain features of your device.

• Show/Hide system apps: Show or hide system (background) apps.

• Special access: Select which apps can have special access permissions to features on your device.

• Reset app preferences: Reset options that have been changed. Existing app data is not deleted.

5. Tap an app to view and update information about the app. The following options may be displayed:

• Uninstall/Disable: Uninstall or disable the app. Preloaded apps can only be disabled.

• Force stop: Stop an app that is not working correctly.

• Mobile data: View mobile data usage.

• Battery: View battery usage since the last full charge.

• Storage: Manage the app’s storage usage.

• Memory: View memory usage.

• Notifications: Configure notifications from the app.

• Permissions: View permissions granted to the app for access to your device’s information.

• Set as default: Set the app as a default for a certain category of apps.

Note: Options vary by app.

The Calculator provides basic and advanced arithmetic functions.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Calculator, and enter the first number.

3. Tap an arithmetic function key, and enter the next number.

4. Tap Equals to view the result.

5. Tap Clear to clear the results.

View and clear your calculator history.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Calculator > History.

• To return to the calculator, tap Keypad.

• To clear the calculator history, tap Clear history.

Quickly convert units of measurement using the unit converter.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Calculator > Unit converter.

3. Select a category and use the drop-down menus to choose units of measurement.

4. Enter a numeric value to view the conversion.

The Calculator app also provides advanced arithmetic functions.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Calculator, and turn the device to landscape view.

• If Auto rotate is not enabled, tap Rotate screen.

Add existing calendars to the Calendar app.

1. From a Home screen, swipe up to access Apps.

2. Tap Calendar > More options.

3. Tap Manage calendars > Add account, and select an account type.

4. Enter your account information and follow the prompts.

There are several ways the calendar can be viewed.

1. From a Home screen, swipe up to access Apps.

2. Tap Calendar > View, and then tap an option:

• Year: Display all twelve months of this year. Swipe across the screen to display another year.

• Month: Display the current month. Swipe across the screen to display another month. Events and tasks are also displayed.

• Week: Display the current week. Swipe across the screen to display another week.

• Day: Display today’s schedule by hour. Swipe across the screen to display another day.

• Tasks: Display all tasks.

3. Tap Today to return to the current date.

Use your Calendar to create events.

1. From a Home screen, swipe up to access Apps.

2. Tap Calendar > Add to add an event.

3. Enter details for the event, and then tap Save.

Share events from your Calendar.

1. From a Home screen, swipe up to access Apps.

2. Tap Calendar, tap an event, and tap again to edit it.

3. Tap Share, choose a sharing method, and follow the prompts.

Delete events from your Calendar.

1. From a Home screen, swipe up to access Apps.

2. Tap Calendar, tap an event, and tap again to edit it.

3. Tap Delete, and confirm when prompted.

Use your Calendar to create tasks. Tasks are items you add to the calendar to be accomplished on a certain day. A task displays as a checklist item and is removed once you mark the task as complete.

1. From a Home screen, swipe up to access Apps.

2. Tap Calendar > View > Tasks.

3. Tap Add to add a task.

4. Enter details for the task, and then tap Save.

Delete tasks from your Calendar.

1. From a Home screen, swipe up to access Apps.

2. Tap Calendar, and tap a day on the calendar to view the tasks for the day, or tap View > Tasks.

3. Tap the Checkbox by the task to mark it as complete and remove it from the calendar.

• To delete a task, tap the task to open it, tap Delete, and confirm when prompted.

Use Calendar settings to customize your calendar.

1. From a Home screen, swipe up to access Apps.

2. Tap Calendar > More options > Settings.

3. Tap an option and follow the prompts.

Take pictures with your device’s front or rear camera.

1. From a Home screen, swipe up to access Apps.

2. Tap Camera.

3. Use the display screen as a viewfinder.

• To focus the shot, tap the screen. When you tap the screen, a brightness scale is displayed. Slide the light bulb to adjust the brightness.

• To add an effects filter, swipe to the left and tap a preview filter to apply it to the screen.

• To change the shooting mode, swipe to the right and select a mode.

• To quickly switch between the front and rear cameras, swipe the screen up or down.

• To change a camera setting, tap Settings.

4. Tap Take a picture.

Record high-quality videos using your device.

1. From a Home screen, swipe up to access Apps.

2. Tap Camera, and aim the camera at your subject.

3. Tap Record to begin recording a video.

• To take a picture while recording, tap Capture.

• To temporarily stop recording, tap Pause. To continue recording, tap Resume.

4. Tap Stop when you are finished recording.

Allow the camera to determine the ideal mode for your pictures or choose from several shooting modes.

1. From a Home screen, swipe up to access Apps.

2. Tap Camera, and swipe to the right to see the available shooting modes.

Rear camera modes:

• Auto: Allow the camera to determine the ideal mode for the picture.

• Pro: Manually adjust the ISO sensitivity, exposure value, white balance, and color tone while taking pictures.

• Panorama: Create a linear image by taking pictures in either a horizontal or vertical direction.

• HDR (Rich tone): Enables the light sensitivity and color depth features of the device to produce a brighter and richer picture.

• Selective focus: Change the focus of pictures after they have been taken. You can focus on subjects near to the camera, far away from the camera, or both.

• Slow motion: Record videos at a high frame rate which can be played in slow motion.

• Hyperlapse: Create your own time lapse video by recording at various frame rates. The frame rate is adjusted depending on the scene being recorded and the movement of the device.

• Food: Take pictures that emphasize the vivid colors of food.

• Virtual shot: Create multi-directional views of objects.

• Selfie: Take selfie shots and apply various effects, such as an airbrushed effect.

• Wide selfie: Take wide-angle selfie shots to fit more people into your pictures.

• Selective focus: Change the focus of pictures after they have been taken. You can focus on subjects near to the camera, far away from the camera, or both.

• Virtual shot: Create multi-directional views of objects.

Use the icons on the main camera screen and the settings menu to configure your camera’s settings.

1. From a Home screen, swipe up to access Apps.

2. Tap Camera > Settings.

Rear camera settings include:

• Picture size: Select a resolution. Selecting a higher resolution for higher quality requires more memory.

• Video size: Select a resolution. Higher resolution requires more memory.

• Tracking AF: Focus on and track a subject selected on the preview screen.

• Shape correction: Correct distortion in pictures automatically.

• Timer: Take time-delayed pictures or videos.

• HDR (rich tone): Enables the light sensitivity and color depth features of the device to produce a brighter and richer picture.

Front camera settings:

• Picture size: Select a resolution. Selecting a higher resolution for higher quality requires more memory.

• Video size: Select a resolution. Higher resolution requires more memory.

• Save pictures as previewed: Save self-portraits or self-recordings as viewed on the camera screen, not as flipped images.

• Shooting methods:

– Tap screen: Tap the screen to take selfies.

– Show palm: Hold your hand out with your palm facing the camera to have your picture taken.

– Tap heart rate sensor: Once your face has been recognized, tap the heart rate sensor to take a selfie.

• Timer: Take time-delayed pictures or videos.

• HDR (rich tone): Enables the light sensitivity and color depth features of the device to produce a brighter and richer picture.

Common settings (for both cameras):

• Motion photo: Create a short video by taking pictures.

• Video stabilization: Activate anti-shake to keep the focus steady when the camera is moving.

• Grid lines: Display viewfinder grid lines to help compose a picture or video.

• Location tags: Attach a GPS location tag to the picture.

• Review pictures: Review pictures after taking them.

• Quick launch: Press the Power key twice in quick succession to open the camera.

• Storage location: Select the memory location. A memory card (not included) must be installed to view Storage location.

• Voice control: Take pictures using key words.

• Floating Camera button: Add a camera button that you can move anywhere on the screen.

• Volume key function: Use the Volume key as the camera key, the record key, a zoom key, or for system volume.

• Shutter sound: Play a tone when you take a picture.

• Reset settings: Reset the camera settings.

The Clock app offers features for keeping track of time and setting alarms.

1. From a Home screen, swipe up to access Apps.

2. Tap Clock, and tap a tab to use a feature.

Use the Alarm tab to set one-time or recurring alarms, and choose options for how to be notified.

1. From a Home screen, swipe up to access Apps.

2. Tap Clock > Add alarm.

3. Tap the following items to configure an alarm:

• Date: Choose the day for this alarm.

• Time: Set a time for the alarm.

• Repeat: Choose when to repeat the alarm.

• Alarm name: Enter a name for the alarm.

• Snooze: Allow snoozing. Set interval and repeat values for the alarm while snoozing.

• Bixby briefing: Enable Bixby Voice to read aloud the current time, weather, and news when the alarm rings. This option is only displayed if Bixby is enabled.

• Alarm sound: Choose a sound to play for the alarm, and drag the slider to set the volume of the alarm.

• Vibration: Choose whether the alarm uses vibration alert.

• Read time aloud: Read the time aloud when the alarm rings.

4. Tap Save to save the alarm.

At the set alarm time, the phone sounds the alarm and/or vibrates.

1. To stop an alarm, tap Dismiss, or swipe Dismiss to the left or right.

2. To postpone the alarm, tap Snooze.

You can delete an alarm that you created.

1. From a Home screen, swipe up to access Apps.

2. Tap Clock, and find the alarm in the alarm list (under Alarm), and then touch and hold it to select it.

3. Tap Delete.

The World clock lets you keep track of the current time in multiple cities around the globe.

1. From a Home screen, swipe up to access Apps.

2. Tap Clock > World clock.

3. Tap Add city.

4. Tap Search and enter the name of the city.

5. Tap the city name in the list, and then tap Add.

• To remove a city, touch and hold it, and tap Delete.

Set a time in a city on your World clock list to see what the local times would be in the other listed cities.

1. From a Home screen, swipe up to access Apps.

2. Tap Clock > World clock.

3. Tap Time zone converter.

4. Tap Menu to choose a different city.

• To add a city to the list, tap Add city.

5. Swipe the hours, minutes, and period (AM or PM) on the clock to set a time. Local times for the other cities listed are automatically updated.

• To return the clock to the current time, tap Reset.

The Stopwatch lets you time events down to a hundredth of a second.

1. From a Home screen, swipe up to access Apps.

2. Tap Clock > Stopwatch.

3. Tap Start to begin timing.

• To keep track of lap times, tap Lap.

4. Tap Stop to end timing.

• To continue timing after stopping the clock, tap Resume.

• To reset the Stopwatch to zero, tap Reset.

The Timer provides a countdown timer for up to 99 hours, 59 minutes, and 59 seconds.

1. From a Home screen, swipe up to access Apps.

2. Tap Clock > Timer.

3. Use the keypad and tap Hours, Minutes, and Seconds to set the length of the Timer.

4. Tap Start to begin the Timer.

• To temporarily stop the Timer, tap Pause. To continue timing after pausing, tap Resume.

• To stop and reset the Timer, tap Cancel.

Use the following procedure to add a new contact.

Note: The Contacts app and the Contacts tab in the Phone app have different options and functions.

1. From a Home screen, swipe up to access Apps.

2. Tap Contacts > Create contact, and then tap contact fields to enter information.

• Choose a storage account for the contact. You can store the contact on the device or sync it with an account.

• Tap Contact photo to assign a picture or an animated GIF to the new contact.

• Enter a name and other contact information.

– Tap Add field to enter additional entries.

– Tap Remove field to remove an entry.

– Tap View more for additional fields.

– Tap the label to the right of an entry to choose a label for the field (for example, Home or Work).

• Tap Scan business card to import contact information from a business card through the device’s camera.

3. Tap Save.

When editing a contact, you can tap a field and change or delete information, or you can add more fields to the contact’s list of information.

1. From a Home screen, swipe up to access Apps.

2. Tap Contacts, and then tap a contact.

3. Tap Details > Edit.

4. Tap any of the fields to add, change, or delete information.

5. Tap Save.

Share a contact by using various sharing methods.

1. From a Home screen, swipe up to access Apps.

2. Tap Contacts, and then tap a contact.

3. Tap Details > Share.

4. Tap either vCard file (VCF) or Text.

5. Choose a sharing method and follow the prompts.

Your device can import contacts from an installed memory card (not included).

1. From a Home screen, swipe up to access Apps.

2. Tap Contacts > More options > Manage contacts.

3. Tap Import/Export contacts.

4. Tap Import and follow the prompts.

Manually back up contacts to an installed memory card (not included).

1. From a Home screen, swipe up to access Apps.

2. Tap Contacts > More options > Manage contacts.

3. Tap Import/Export contacts.

4. Tap Export and follow the prompts.

Consolidate contact information from multiple sources into one contact by linking entries into a single contact.

1. From a Home screen, swipe up to access Apps.

2. Tap Contacts, and then tap the contact to select it.

3. Tap Details > More options > Link contacts.

4. Tap contacts to choose them.

5. Tap Link.

To unlink contacts:

1. From a Home screen, swipe up to access Apps.

2. Tap Contacts, and then tap the contact to select it.

3. Tap Details > More options > Manage linked contacts.

4. Tap Unlink beside contacts to unlink them from the main contact.

When you mark contacts as favorites, they are easily accessible from other apps.

1. From a Home screen, swipe up to access Apps.

2. Tap Contacts, and then tap a contact.

3. Tap Details.

4. Tap Add to Favorites to mark contacts as Favorites and the star brightens.

• To remove contacts from Favorites, tap Remove from Favorites and the star dims.

Delete a single contact or multiple contacts.

1. From a Home screen, swipe up to access Apps.

2. Tap Contacts, and then touch and hold a contact to select it.

• You can also tap other contacts to select them for deletion.

3. Tap Delete, and confirm when prompted.

You can use groups to organize your contacts. Create your own contact groups.

1. From a Home screen, swipe up to access Apps.

2. Tap Contacts > Groups.

3. Tap Create, and then tap fields to enter information about the group:

• Group name: Enter a name for the new group.

• Group ringtone: Customize the sounds for the group.

• Add member: Select contacts to add to the new group, and then tap Done.

4. Tap Save.

Add more contacts to a group, or remove contacts.

1. From a Home screen, swipe up to access Apps.

2. Tap Contacts > Groups, and then tap a group.

• To remove a contact, touch and hold a contact to select it, and then tap Remove.

• To add a contact, tap Edit > Add member, and then tap the contacts you want to add. When finished, tap Done > Save.

Send a text message to members of a group.

1. From a Home screen, swipe up to access Apps.

2. Tap Contacts > Groups, and then tap a group.

3. Tap More options > Send message.

Send an email to members of a group.

1. From a Home screen, swipe up to access Apps.

2. Tap Contacts > Groups, and then tap a group.

3. Tap More options > Send email.

4. Tap contacts to select them, or tap the All checkbox at the top of the screen to select all, and then tap Done.

• Only group members that have an email address in their records are displayed.

5. Choose an email account and follow the prompts.

Delete a group you have created.

1. From a Home screen, swipe up to access Apps.

2. Tap Contacts > Groups, and then tap a group.

3. Tap More options > Delete.

• To only delete the group, tap Group only.

• To delete the group and the contacts in the group, tap Group and members.

These settings allow you to modify settings associated with using the Contacts app.

1. From a Home screen, swipe up to access Apps.

2. Tap Contacts > More options > Settings.

3. Tap an option and follow the prompts.

Share content directly with your contacts from within any app. Once enabled, your frequent contacts are displayed in the Share window.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Advanced features > Direct share, and tap On/Off to enable.

View and manage all of your email accounts in one app. Learn how to create and send email messages.

1. From a Home screen, swipe up to access Apps.

2. Tap Email > Compose new email.

• Different email account may have additional steps and options.

3. Tap the To field to manually add an email address or tap Add from Contacts to select a recipient from Contacts, Groups, or Recents.

• If manually entering recipients, enter additional recipients by separating each entry with a semicolon (;). More recipients can be added at any time before the message is sent.

• If adding a recipient from your Contacts, tap the contact to place a checkmark, and then tap Done. The contact is displayed in the recipients field.

• Tap Show additional fields to add Cc and Bcc fields.

4. Tap the Subject and Message fields to enter text.

• Tap Attach to add files, images, audio, and more to your email.

• Tap More options for additional email options.

5. Review your message and tap Send.

There are several tools available from the Inbox screen.

1. From a Home screen, swipe up to access Apps.

2. Tap Email.

• Tap a message to read and reply or forward it.

• Tap Search to search for key words in your email inbox.

• Tap Edit for additional message options.

• Tap Sort by to customize how messages display.

You can view email you receive for multiple accounts, or you can view email accounts individually.

1. From a Home screen, swipe up to access Apps.

2. Tap Email.

3. Tap Mailbox at the top left of the screen to choose a different view:

• [Account name]: View email for only one email account.

• All accounts: View all email in a combined inbox.

Email accounts can be removed from your device.

1. From a Home screen, swipe up to access Apps.

2. Tap Email.

3. Tap Mailbox > Settings.

4. Tap the account you want to remove.

5. Tap Remove, and confirm when prompted.

Modify settings associated with using the Email app.

1. From a Home screen, swipe up to access Apps.

2. Tap Email.

3. Tap Mailbox > Settings.

• Under General, tap an option, and then follow the prompts.

• Tap an account to configure specific settings for only that account.

Find and download premium apps that are exclusive to Galaxy devices. A Samsung account is required to download from Galaxy Apps.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Galaxy Apps.

View, edit, and manage pictures and videos.

The following categories allow you to organize your content:

• Pictures: View pictures and videos in the order they were saved. Content is organized by date.

• Albums: Create custom albums to organize your pictures and videos.

• Stories: Create custom collections of related pictures and videos and share them with your contacts.

Pictures stored on your device are viewable in the Gallery app.

1. From a Home screen, swipe up to access Apps.

2. Tap Gallery > Pictures.

3. Tap a picture to view it. Swipe left or right to view other pictures or videos.

• To mark the picture as a favorite, tap Favorite. The picture is added to Favorites under the Albums tab.

• To use Bixby Vision on the current picture, tap Bixby Vision.

To access the following features when viewing a picture, tap More options:

• Details: View and edit information about the picture, including the date created, location, and properties.

• Set as wallpaper: Set the picture as wallpaper.

• Set as Always On Display image: Set the picture as the background image for the Always On Display.

• Show date and location tags: See date and location tags when viewing your pictures.

• Print: Send the picture to a connected printer.

• Open in Photo Editor Pro: Edit the picture in Photo Editor Pro.

Edit pictures stored on your device.

1. From a Home screen, swipe up to access Apps.

2. Tap Gallery > Pictures.

3. Tap a picture to view it. The following editing tools may be available:

• Transform: Rotate, flip, crop, or make other changes to the overall appearance of the picture.

• Effects: Add color effects.

• Stickers: Overlay illustrated or animated stickers.

• Draw: Add handwritten text or hand drawn content.

Play videos stored on your device.

1. From a Home screen, swipe up to access Apps.

2. Tap Gallery > Pictures.

3. Tap a video to view it. Swipe left or right to view other pictures or videos.

• To mark the video as a favorite, tap Favorite. The video is added to Favorites under the Albums tab.

• To access the following features, tap More options:

– Details: View and edit information about the video, including the date created, location, and properties.

– Show date and location tags: See date and location tags when viewing your videos.

4. Tap Play video to play the video.

Enhance the playback quality of your videos in any video app.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Advanced features > Video enhancer.

3. Tap On/Off to enable this feature.

Edit videos stored on your device.

1. From a Home screen, swipe up to access Apps.

2. Tap Gallery > Pictures.

3. Tap a video to view it.

4. Tap Edit to use the following tools:

• Trim: Cut segments of the video.

• Effects: Add visual effects to the video.

• Touch up effect: Enhance faces.

• Stickers: Overlay illustrated or animated stickers.

• Audio: Adjust the volume levels and add background music to the video.

5. Tap Save, and then confirm when prompted.

Share pictures and videos from the Gallery app.

1. From a Home screen, swipe up to access Apps.

2. Tap Gallery > Pictures.

3. Tap More options > Share, and then tap pictures and videos to select them.

4. Tap Share, and then choose an app or connection to use for sharing your selection. Follow the prompts.

Delete pictures and videos stored on your device.

1. From a Home screen, swipe up to access Apps.

2. Tap Gallery.

3. Tap More options > Edit.

4. Tap pictures and videos to select them, or tap the All checkbox at the top of the screen to select all pictures and videos.

5. Tap Delete, and confirm when prompted.

Capture an image of your screen. It will automatically create a Screenshots album in the Gallery app.

From any screen, press and hold the Power and Volume down keys.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Advanced features.

3. Tap On/Off to enable each of the following:

• Smart capture: Capture an image of any scrollable areas of the screen that are currently hidden, as well as the area that is visible, and crop and share the screenshot immediately.

• Palm swipe to capture: Capture an image of the screen by swiping the edge of your hand across it, from side to side, keeping in contact with the screen.

Watch and upload YouTube™ videos right from your device.

1. From a Home screen, swipe up to access Apps.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Internet.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Internet.

3. Tap the address field, enter the web address, and then tap Go on the keyboard.

Add to Bookmarks: Add the current web page to bookmarks.

Refresh: Refresh or reload the current web page.

< Back or Back: Return to the previous page.

Forward: Go forward to a recent page.

Home: Display your Internet Home screen.

Bookmarks: Manage bookmarked pages, saved pages, and history.

Tabs: Manage open tabs. The number on the icon indicates the number of tabs that are currently open.

Tap Quick menu for the following options:

Share: Share the web page with others.

New tab: Open a new tab.

Turn on Night mode: Switch to Night mode.

Web page text size: Change the text size.

Close: Close the Quick menu.

Settings: Change Quick menu options.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Internet.

3. Tap Tabs > New tab.

To close a tab, tap X Close tab.

The Bookmarks page stores Bookmarks, Saved pages, and History.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Internet.

3. Tap Add to Bookmarks.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Internet.

3. Tap Bookmarks > Bookmarks.

4. Tap a bookmark entry.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Internet.

3. Tap More options > Save webpage.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Internet.

3. Tap Bookmarks > Saved pages.

4. Tap a saved page.

Tap Bookmarks > History.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Internet.

3. Tap More options > Share, and follow the prompts.

Pages viewed in Secret mode are not listed in your browser history or search history, and leave no traces (such as cookies) on your device. Secret tabs are a darker shade than the normal tab windows. Any downloaded files remain on your device after you close the secret tab.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Internet.

3. Tap Tabs.

4. Tap Turn on secret mode.

5. Tap Set password to protect your Secret mode data with a password. – or – Tap Don’t use password.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Internet.

3. Tap Tabs > Turn off secret mode.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Internet.

3. Tap More options > Settings.

4. Tap an option and follow the prompts.

1. From a Home screen, swipe up to access Apps.

2. Tap Messages > Compose.

3. Tap contacts, if desired, and then tap Compose.

Tap the Recipient field to manually enter a recipient. You can also select the recipient based on Groups or recent calls.

Enter additional recipients by separating each entry with a semicolon (;) and then using the previous procedure. More recipients can be added at any time before the message is sent.

4. Tap the Enter message field to enter a message.

Attach: Add images, audio, and more to your message.

Emoticon: Choose an available emoticon from the list and add it into your message at the cursor location.

5. Review the message and tap Send.

If you exit a message before you send it, the message is automatically saved as a draft.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Advanced features > Send SOS messages, and then tap On/Off to enable this feature.

3. Tap Send messages to > Add and add recipients by creating new contacts or selecting from Contacts.

To include a picture from your front and rear camera, tap Attach pictures.

To include a five-second audio recording in your SOS message, tap Attach audio recording.

4. Press the Power key quickly three times to send an SOS message.

1. From a Home screen, swipe up to access Apps.

2. Tap Messages, and then tap a message to view it.

To play an audio or video attachment, tap Play.

To scroll through the list of messages, swipe up or down.

1. From a Home screen, swipe up to access Apps.

2. Tap Messages > More options > Edit.

3. Tap each message you want to delete.

4. Tap Delete, and confirm when prompted.

1. From a Home screen, swipe up to access Apps.

2. Tap Messages > Search.

3. Enter a word or phrase to search for, and then tap Search on the keyboard.

1. From a Home screen, swipe up to access Apps.

2. Tap Messages > More options > Settings.

Emergency alerts notify you of imminent threats and other situations. There is no charge for receiving an Emergency alert message.

1. From a Home screen, swipe up to access Apps.

2. Tap Messages > More options > Settings.

3. Tap Notifications > Wireless emergency alerts to customize notifications for emergency alerts.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > My Files.

3. Tap a category to view the relevant files or folders.

4. Tap a file or folder to open it.

Recent files: View recently accessed files. This option displays if one or more files have been accessed recently.

Categories: View your files based on the file type.

Phone: View folders and files located on the device and optional memory card (not included).

Cloud: View files saved on your cloud accounts. Cloud drives vary depending on the services you sign in to.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > My Files. The following options are available:

Search: Search for a file or folder.

More options:

Get more space: View storage information for your device.

Settings: View settings for the app.

Search

Recents

Contacts

Places

Keypad (1-9, *, 0, #)

Voicemail icon

Call icon

Hide keyboard icon

Video call icon

More options icon

1. From a Home screen, tap Phone.

2. Enter a number on the keypad and tap Call.

Tap Keypad if the keypad is not displayed.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Advanced features > Swipe to call or send messages.

3. Tap On/Off to enable this feature.

1. From a Home screen, tap Phone.

2. Tap Recents to display a list of recent calls.

3. Tap a contact, and then tap Call.

1. From a Home screen, swipe up to access Apps.

2. Tap Contacts.

3. Swipe your finger across a contact to the right to call the contact.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Advanced features > Direct call, and tap On/Off to enable.

Call the contact whose call log, message, or contact details are currently on the screen by bringing the device close to your ear.

On the incoming call screen, drag Answer to the right to answer the call.

– or –

On the incoming call pop-up screen, tap Answer to answer the call.

On the incoming call screen, drag Decline to the left to reject the call and send it to your voicemail.

– or –

On the incoming pop-up screen, tap Decline to reject the call and send it to your voicemail.

On the incoming call screen, drag Send message upward and select a message.

– or –

On the incoming call pop-up screen, tap Send message and select a message.

Tap End when you are ready to end your call.

Press the Volume keys to increase or decrease the volume.

– or –

Tap More options > Turn on extra volume to quickly add more volume to the incoming audio.

Tap Speaker to hear the caller using the speaker.

– or –

Tap Bluetooth to hear the caller using a Bluetooth headset.

If you exit the call screen to use another app, your active call is indicated in the Status bar.

Drag the Status bar down to display the Notification panel and tap the call.

Drag the Status bar down to display the Notification panel, and then tap End call.

1. From a Home screen, tap Phone.

2. Tap Recents. A list of recent calls is displayed. If the caller is in your Contacts list, the caller’s name is displayed.

1. From a Home screen, tap Phone.

2. Tap Recents.

3. Tap the call that contains the information that you want to save to your Contacts list.

4. Tap Details.

5. Tap Create contact.

– or –

If you want to replace the number for an existing contact, tap Update existing.

1. From a Home screen, tap Phone.

2. Tap Recents.

3. Touch and hold the call you want to delete from the Call log.

4. Tap Delete.

1. From a Home screen, tap Phone.

2. Tap Recents.

3. Tap the caller you want to add to the Block list.

4. Tap Details > Block number, and confirm when prompted.

From a Home screen, tap Phone > More options > Settings > Block numbers.

1. From a Home screen, tap Phone.

Tap Keypad if the keypad is not displayed.

2. Tap More options > Speed dial. The Speed dial screen displays the reserved speed dial numbers.

3. Tap an unassigned number.

Tap Menu to select a different Speed dial number than the next one in sequence.

Number 1 is reserved for Voicemail.

4. Type in a name or number, or tap Add from Contacts to assign a contact to the number.

The selected contact is displayed in the Speed dial number box.

1. From a Home screen, tap Phone.

Tap Keypad if the keypad is not displayed.

2. Touch and hold the Speed dial number.

If the Speed dial number is more than one digit long, enter the first digits, and then hold the last digit.

1. From a Home screen, tap Phone.

Tap Keypad if the keypad is not displayed.

2. Tap More options > Speed dial.

3. Tap Remove by the contact you want to remove from Speed dial.

1. From a Home screen, tap Phone.

2. Enter the emergency telephone number (911 in North America) and tap Call.

3. Complete your call. During this type of call, you have access to most in-call features.

1. Drag Phone upward to open the call screen.

2. Tap Emergency call to display the Emergency dialer.

3. Enter the emergency telephone number (911 in North America) and tap Call.

4. Complete your call. During this type of call, you have access to most in-call features.

1. From a Home screen, tap Phone.

2. Tap Voicemail.

– or –

From a Home screen, swipe up to access Apps, and then tap Visual Voicemail.

3. Follow the voice prompts from the voicemail center.

1. From the active call, tap + Add call to dial the second call.

2. Dial the new number and tap Call. When the call is answered:

Tap Swap to switch between the two calls.

Tap Merge to hear both callers at once (multi-conferencing).

1. From a Home screen, tap Phone.

2. Enter a number and tap Video call.

Note: Not all devices support video calling. The receiver has the option to accept the video call or answer the call as a regular voice call.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Wi-Fi calling.

3. Tap On/Off to enable this feature.

4. Follow the prompts to set up and configure Wi-Fi calling.

1. From a Home screen, swipe up to access Apps.

2. Tap Phone > More options > Settings.

3. Tap an option and follow the prompts.

1. From a Home screen, swipe up to access Apps.

2. Tap Phone > More options > Settings.

3. Tap More settings > TTY mode.

4. Tap TTY OFF, TTY FULL, TTY HCO, or TTY VCO.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Samsung Gear.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Samsung Notes.

3. Tap Create and type a note. Available options include:

Text: Use the keyboard to type text.

Pen: Use your finger to write text.

Brush: Create a drawing.

Attach: Insert an image or voice file into the note.

4. Tap Save when finished.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Samsung Notes.

3. Tap a note to view it.

4. Tap Edit to make changes.

5. Tap Save.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Samsung Notes.

Browse note entries by swiping up or down.

To search for a note, tap Search.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Samsung Notes.

3. Tap More options for the following options:

Edit: Select notes to share, delete, or move.

Sort by: Change the way notes are organized.

List/Grid view: Switch between List view and Grid view.

Trash: View deleted notes.

Settings: View settings for the Samsung Notes app.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung Pay, and tap Start and follow the prompts.

Note: For added security, your credit and debit card information is not stored on a cloud service. If you are using the Samsung Pay app on multiple devices, you must sign in to the app and add all payment cards on each device.

Note: Make sure the NFC feature is enabled on your device.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung Pay.

3. Select a card to pay with and authorize payments by scanning your finger or iris, or by entering your Samsung Pay PIN.

4. Hold your phone over the store’s card reader.

When your payment is complete, a receipt is sent to your registered email.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung Pay.

3. Tap More options > Settings > Use Favorite Cards.

4. Tap On/Off to enable Simple Pay on each screen (Lock Screen, Home screen, or Always On Display).

1. From any screen, swipe up from the bottom of the screen.

Your payment card and Simple Pay are displayed.

2. Drag the card down to close Simple Pay.

If your device is ever lost, you can use the Find My Mobile function to remotely wipe your data for even more protection.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Samsung+.

3. Tap Get started, and sign in to your Samsung account.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Samsung+.

3. Tap Plus for the following options:

Search: Enter keywords to find the information you need.

Community: View community boards where you can ask questions and give answers to other Samsung users.

Text chat: Chat with an automated support system by texting.

Call us: Start a phone call with customer service.

Video chat: Start a video call with customer service.

The app will open to your Home page. Swipe left and right across the tabs to view Help topics.

Home: Register your Samsung devices and view customized cards.

Learn: View Articles about your device to help you get the most out of it.

Community: View community boards where you can ask questions and give answers to other Samsung users.

Get help: View quick links to call, video, and community support for your device.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Secure Folder.

3. Follow the prompts to create a secure lock for your folder.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Secure Folder.

3. Tap Add apps and tap the apps you want to add to the Secure folder.

4. Tap Add.

To remove apps from the Secure folder, tap Edit apps, select the apps, and tap Uninstall/Disable.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Secure Folder.

3. Tap Add files and tap the location of your files.

4. Tap the file you want to add, and tap Done.

To remove files from the Secure folder, touch and hold the file, and tap More options > Move out of Secure Folder.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Secure Folder.

3. Tap More options > Customize icon.

To change the app name, tap under Enter app name and type a new name, and tap Apply.

To change the app icon, tap an icon, and tap Apply.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Secure Folder.

3. Tap More options > Settings and tap an option to customize.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Smart Switch.

1. From a Home screen, swipe up to access Apps.

2. Tap Samsung folder > Samsung Connect, and sign in with your Samsung account.

3. Follow the prompts to begin using Samsung Connect.

Change channels, adjust the volume, and schedule recordings using the Remote app.

Auto reply when you are driving and do not want to answer the phone. You can auto reply to messages, emails, and phone calls. You can also allow up to five of your contacts to contact you while using DriveMode.

Manage your AT&T account. You can review and pay your bill, check minutes and data usage, upgrade to a new device, or change your plan.

Transfer your contacts, call logs, messages and media when switching phones.

Set limits on purchases and texts, block data and phone numbers, and view phone activity with this family smartphone manager.

View and play voicemail messages, easily save important numbers to your Favorites list, and respond by calling or texting.

Keep up with friends and family with the Facebook app. Share updates, photos, and videos, as well as text, chat, and play games.

Configure and manage key security options, such as anti-virus and anti-malware technology, a lost and stolen device locator service, an application privacy adviser, and a backup service.

From a Home screen, swipe up to access Apps, and then tap Settings.

– or –

Drag down from the Status bar to display the Notification panel, and then tap Settings.

1. From a Home screen, swipe up to access Apps, and then tap Settings.

2. Tap Search.

3. Enter a word or words in the Search field. As you type, settings that match display on the screen.

4. Tap an entry to go to that setting.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Wi-Fi, and then tap On/Off to turn on Wi-Fi.

When Wi-Fi is turned on, your device automatically scans for available networks and displays them.

3. Tap the network you want to connect to.

When you select an open network, you are automatically connected to the network. Otherwise, enter a password to connect.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Wi-Fi, and then tap On/Off to turn on Wi-Fi.

3. Tap + Add network at the bottom of the list.

4. Enter information about the Wi-Fi network:

Network name: Enter the network name.

Security: Select a security option and enter your password.

Show advanced options: Add advanced options, such as IP settings and Proxy settings.

5. Tap Connect.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Wi-Fi, and then tap On/Off to turn on Wi-Fi.

3. Tap Advanced. To view all network settings, tap View more.

Switch to mobile data: Connect automatically to a mobile network connection when the Wi-Fi connection is unstable. When the Wi-Fi signal is strong, it switches back to Wi-Fi.

Turn on Wi-Fi automatically: Enable Wi-Fi in frequently used locations.

Wi-Fi power saving mode: Reduce battery usage by analyzing Wi-Fi traffic patterns.

Network notification: Receive notifications when open networks in range are detected.

Auto connect to AT&T Wi-Fi: Automatically connect to AT&T Wi-Fi hotspot when detected.

Manage networks: View your saved Wi-Fi networks.

Wi-Fi control history: View devices that have turned your Wi-Fi on or off.

Hotspot 2.0: Connect automatically to Wi-Fi access points that support Hotspot 2.0.

WPS push button: Connect to a Wi-Fi network by pressing the WPS button on a router.

WPS PIN entry: Connect to a Wi-Fi network by entering your WPS PIN.

Keep Wi-Fi on during sleep: Specify whether to disconnect from Wi-Fi when the device is asleep.

Install network certificates: Install authentication certificates.

MAC address: View your device’s MAC address, which is required when connecting to some secured networks (not configurable).

IP address: View your device’s IP address (not configurable).

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Wi-Fi, and then tap On/Off to turn on Wi-Fi.

3. Tap Wi-Fi Direct.

Your device scans for discoverable Wi-Fi Direct devices.

4. Tap a device, and then follow the prompts to connect.

1. From an app, tap Share.

– or –

Tap More options > Share.

2. Tap Wi-Fi Direct and follow the prompts.

When another device attempts to send a file to your device using Wi-Fi Direct, your device begins downloading the file.

To open the file, drag down the Status bar and tap File received.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Wi-Fi > Wi-Fi Direct.

3. Tap a device to disconnect it.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Bluetooth, and then tap On/Off to turn on Bluetooth.

Your device scans for discoverable Bluetooth devices. To scan again, tap Scan.

3. Tap a device, and follow the prompts to connect.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Bluetooth, and then tap On/Off to turn on Bluetooth.

3. Tap Settings next to the previously paired device, and then tap Rename.

4. Enter a new name, and tap Rename.

1. From an app, tap Share.

– or –

Tap More options > Share.

2. Tap Bluetooth and follow the prompts.

When another device attempts to send a file to your device using Bluetooth, you will see a request to accept the file.

1. Tap Accept.

2. To open the file, drag down the Status bar and tap File received.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Bluetooth, and then tap On/Off to turn on Bluetooth.

3. Tap Settings next to the paired device, and then tap Unpair to delete the paired device.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Phone visibility, and then tap On/Off.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Data usage.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Data usage > Data saver.

3. Tap On/Off to turn Data saver on.

To allow some apps to have unrestricted data usage, tap Allow app while Data saver on, and tap On/Off next to each app to specify restrictions.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Data usage. The following options are available:

Mobile data: Enable mobile data services.

International data roaming: Enable mobile data services while roaming internationally.

Mobile data usage: Monitor mobile data usage by app.

Billing cycle and data warning: Set the day of the month to start the bill cycle for your device.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Data usage. The following options are available:

Wi-Fi data usage: View data usage over Wi-Fi connections.

Restrict networks: Select networks to prevent apps that are running in the background from using them.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Airplane mode.

3. Tap On/Off to enable this feature.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > NFC and payment.

3. Tap On/Off to enable this feature.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > NFC and payment, and then tap On/Off to enable NFC.

3. Tap Android Beam, and then tap On/Off to enable this feature.

1. From an app, tap Share.

– or –

Tap More options > Share.

2. Tap Android Beam and follow the prompts. (This involves touching the backs of the devices).

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > NFC and payment, and then tap On/Off to enable NFC.

3. Tap Tap and pay, and tap an app to set it as the default payment method.

To specify when to use the default app, tap If open app supports Tap and pay.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Mobile hotspot and tethering > Mobile hotspot.

3. Tap On/Off to turn on Mobile hotspot.

4. Activate Wi-Fi on the target device.

5. Scan for Wi-Fi hotspots and select your device’s Mobile hotspot.

6. Enter your device’s Mobile hotspot password on the target device.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Mobile hotspot and tethering > Mobile hotspot.

3. Tap the password and enter a new password.

4. Tap Save.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Mobile hotspot and tethering > Mobile hotspot.

3. Tap More options > Allowed devices, and then tap Add to enter the other device’s Device name and MAC address.

4. Tap Add to add the device.

To restrict connections to your Allowed devices list, tap Allowed devices only.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Mobile hotspot and tethering > Mobile hotspot.

3. Tap More options > Configure mobile hotspot for the following settings:

Network name: View and change the name of your Mobile hotspot.

Hide my device: Prevent your Mobile hotspot from being discoverable by other devices.

Security: Choose the security level for your Mobile hotspot.

Password: If you choose a security level that uses a password, you can view or change it.

Show advanced options: Configure additional Mobile hotspot settings.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Mobile hotspot and tethering > Mobile hotspot.

3. Tap More options > Timeout settings, and then select an interval.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Mobile hotspot and tethering > Mobile hotspot.

3. Tap Wi-Fi sharing to enable this feature.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Mobile hotspot and tethering.

3. Connect the computer to the device using a USB cable, and then tap USB tethering.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Mobile networks. Options include:

Mobile data: Enable mobile data usage.

Enhanced LTE services: Enable HD Voice and advanced communication services where available.

International data roaming: Change voice, text and data roaming settings for international roaming.

Disable 2G: Do not use 2G mobile data networks.

VoLTE calls: Turn on enhanced communication using LTE.

Access Point Names: Choose or add APNs.

You can turn on Accessibility features to assist with visual aspects of the device by following these steps:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Accessibility > Vision.

From here, you can select various vision assistance options.

Voice Assistant gives spoken feedback to assist blind and low-vision users.

Voice Assistant can collect all of the text you enter, except passwords, including personal data and credit card numbers. It may also log your user interface interactions with the device.

You can view help on using Voice Assistant by accessing the Voice Assistant help feature within the Vision accessibility settings.

The Dark screen feature keeps the screen turned off at all times for privacy. It is one of the Vision accessibility options.

Rapid key input allows you to release your finger to enter a selection instead of double tapping. This is a Vision accessibility feature.

Voice Label allows you to write voice recordings to NFC tags to provide information about nearby objects. This is a Vision accessibility feature.

You can configure the screen zoom level and font size and style through the Font and screen zoom option in Vision accessibility settings.

High contrast fonts adjust the color and outline of fonts to increase the contrast with the background. This is a Vision accessibility feature.

High contrast keyboard allows you to adjust the size of the Samsung keyboard and change its colors to increase the contrast between the keys and the background. This is a Vision accessibility feature.

Show button shapes is a Vision accessibility feature that shows buttons with shaded backgrounds to make them stand out.

The Magnifier window feature, found under Vision accessibility settings, magnifies content shown on the screen.

Magnification is a Vision accessibility feature that allows you to use exaggerated gestures such as triple-tapping, double pinching, and dragging two fingers across the screen to magnify content.

You can enable a large pointer for a connected mouse or touchpad through the Large mouse/touchpad pointer option in Vision accessibility settings.

Negative colors is a Vision accessibility feature that reverses the display of colors from white text on a black background to black text on a white background.

Color adjustment allows you to adjust the color of the screen if you are color blind or have difficulty reading the display because of the screen color. This is a Vision accessibility feature.

Color lens is a Vision accessibility feature that adjusts the screen colors if you have difficulty reading the text.

You can turn on Accessibility features to assist with audio aspects of the device by following these steps:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Accessibility > Hearing, and then tap an option.

Sound detectors are a Hearing accessibility feature that allows you to receive alerts when the device detects a baby crying or a doorbell.

Flash notification is a Hearing accessibility feature that sets the camera light or screen to blink whenever you receive a notification.

Mute all sounds is a Hearing accessibility feature that turns off all notifications and audio for privacy.

The Hearing aids feature in Hearing accessibility settings helps improve the sound quality for use with hearing aids.

Samsung subtitles (CC) is a Hearing accessibility feature that allows you to use Samsung subtitles with multimedia files when available.

Google subtitles (CC) is a Hearing accessibility feature that allows you to use Google subtitles with multimedia files when available.

You can adjust the left and right sound balance when using a stereo device by using the slider in the Left/right sound balance feature, found under Hearing accessibility settings.

Mono audio is a Hearing accessibility feature that switches audio from stereo to mono for use with one earphone.

You can turn on Accessibility features to assist with dexterity and interaction aspects of the device by following these steps:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Accessibility > Dexterity and interaction, and then tap an option.

Universal switch is a Dexterity and interaction accessibility feature that allows you to control your device with your customized switches.

The Assistant menu is a Dexterity and interaction accessibility feature that improves device accessibility for users with reduced dexterity.

Easy screen turn on is a Dexterity and interaction accessibility feature that allows you to turn on the screen without having to press any buttons.

You can select a time interval for the touch and hold action through the Touch and hold delay feature in Dexterity and interaction accessibility settings.

Click after pointer stops is a Dexterity and interaction accessibility feature that automatically clicks on an item after the pointer stops over it.

Interaction control is a Dexterity and interaction accessibility feature that allows you to customize interactable or non-interactable areas, hardkeys, and the keyboard.

To customize additional accessibility features for your device:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Accessibility, and then tap an option under More accessibility settings.

You can set your preferred Text-to-Speech (TTS) engine and options via the Text-to-speech setting under More accessibility settings. Detailed options for TTS are available elsewhere.

Direction lock is an accessibility feature that allows you to unlock the screen by swiping in a series of directions. It’s found under More accessibility settings.

Direct access allows you to open your accessibility settings by pressing the Volume up key and the Power key together. This is found under More accessibility settings.

The Accessibility shortcut allows you to quickly enable accessibility features using the Volume keys. This is configured under More accessibility settings.

Notification reminder is an accessibility feature that beeps at set intervals to remind you of any unread notifications. It’s found under More accessibility settings.

You can select shortcuts for answering and ending calls through the Answering and ending calls option under More accessibility settings.

Single tap mode allows you to dismiss or snooze alarms, calendar events, and timer alerts, and answer or reject incoming calls with a single tap. This is an accessibility feature found under More accessibility settings.

You can import and export your accessibility settings, or share them with other devices, using the Accessibility settings backup feature found under More accessibility settings.

Additional accessibility apps may be downloaded. To configure these:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Accessibility.

3. Other installed accessibility services may be listed and configured under Services.

To view the user manual on your device:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Help.

Game Launcher automatically arranges all your games in one place. To manage game features and enable Game Launcher:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Advanced features > Games.

3. Tap On/Off to enable Game Launcher.

Device assistance apps help you by gathering information from the screen currently shown. To customize:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Advanced features > Device assistance app.

3. Tap an option to customize:

• Device assistance app: Select your default assistance app.

• Analyze on-screen text: Analyze text shown on the screen to provide related content.

• Analyze on-screen images: Take and analyze images of the screen.

Dual messenger allows you to use two separate accounts for the same app. To enable it:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Advanced features > Dual messenger.

3. Tap On/Off next to supported apps to enable the feature for each app.

To view information about your device, including current status, legal information, hardware and software versions, and more:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > About phone. Here you can view your phone number, model number, serial number, and IMEI information.

3. Tap additional items to view more information about your device.

To avoid electric shock and damage to your device, do not charge the device while it is wet or in an area where it could get wet. Do not handle the device, charger, or cords with wet hands while charging.

It is important that all compartments are closed tightly to maintain water and dust resistance.

Follow these tips carefully to prevent damage to the device:

• Any device which uses accessible compartments or ports that can be opened, should have these sealed or closed tightly to prevent liquid from entering the system.

• Whenever your device gets wet, dry it thoroughly with a clean, soft cloth. If your device has gotten wet, you should dry the inside of the charging port before inserting a power connector to charge your device. If the charging port is not fully dry, your device may operate abnormally, for example, it may charge more slowly or overheat.

• Do not expose the device to salt water or ionized water, or to water over 5.0 feet deep for more than 30 minutes. If your device is exposed to fresh water, dry it thoroughly with a clean, soft cloth. If the device is exposed to any liquid other than fresh water, rinse the device with fresh water immediately and dry it thoroughly with a clean, soft cloth. Failure to rinse the device in fresh water and dry it as instructed may cause the device to suffer from operability or cosmetic issues.

• The device is water resistant based on IP68 rating, which tests submersion in fresh water up to 5 feet for up to 30 minutes. If the device is exposed to fresh water, dry it thoroughly with a clean, soft cloth; if exposed to liquid other than fresh water, rinse with fresh water and dry as directed.

Warning! Liquid other than fresh water may enter the device faster. Failure to rinse the device in fresh water and dry it as instructed may cause the device to suffer from operability or cosmetic issues.

• Do not expose the device to water at high pressure.

• If the device is dropped or receives an impact, the water and dust resistant features of the device may be damaged.

• To maintain the water-resistant and dust-resistant features of your device, if an S Pen is available for use, verify it is securely inserted prior to any exposure to liquids.

• The touchscreen and other features may not work properly if the device is used in water or in other liquids.

Your device is not a toy. Do not allow children to play with it because they could hurt themselves and others, damage the device, or make calls that increase your device bill. Keep the device and all its parts and accessories out of the reach of small children.

Some apps may require location services to be turned on for full functionality. To configure them:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Location.

3. Tap On/Off to turn on Location services.

4. Tap Locating method to select how your location is determined:

• High accuracy: Uses GPS, Wi-Fi, and mobile networks.

• Battery saving: Uses Wi-Fi and mobile networks (no GPS).

• Phone only: Uses GPS only.

To use other connections for determining your location more accurately, after navigating to Settings > Connections > Location:

Tap Improve accuracy and configure the following options:

• Wi-Fi scanning: Allow apps and services to scan for Wi-Fi networks automatically, even when Wi-Fi is turned off.

• Bluetooth scanning: Allow apps to scan for and connect to nearby devices automatically through Bluetooth, even when Bluetooth is turned off.

Apps that have requested your location are listed under Recent location requests. To view them:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Location.

3. Ensure Location services are On/Off as desired.

4. Tap an entry under Recent location requests to view the app’s settings.

Location services store and use your device’s most recent location data. Google apps can use this data. To manage these services:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > Location.

3. Tap an entry under Location services to use as a location service.

Nearby device scanning helps you connect to and set up nearby devices easily. To enable it:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > More connection settings > Nearby device scanning.

3. Tap On/Off to enable the feature.

To connect your device to a printer on the same Wi-Fi network:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > More connection settings > Printing.

3. Tap + Add service and follow the prompts to add a print service.

4. Tap the print service, and then tap More options > Add printer.

MirrorLink mirrors your device’s display on your car’s entertainment screen using a USB connection. Your car system must support MirrorLink.

1. Connect your device to your car’s system using the USB cable.

2. From a Home screen, swipe up to access Apps.

3. Tap Settings > Connections > More connection settings > MirrorLink.

4. Tap Connect to car via USB, and follow the prompts.

To set up and manage your Virtual Private Networks (VPNs), you must first set a secured screen lock.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > More connection settings > VPN.

3. Tap Add VPN profile and follow the prompts to set up your VPN.

Use the VPN settings menu to edit or delete a VPN connection:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > More connection settings > VPN.

3. Tap Settings next to a VPN.

4. Edit the VPN and tap Save. Alternatively, tap Delete to delete the VPN.

Once you have set up a VPN connection:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > More connection settings > VPN.

3. Tap a VPN, enter your log in information, and tap Connect.

• To disconnect, tap the VPN, and then tap Disconnect.

To connect to a network using an Ethernet connection:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Connections > More connection settings > Ethernet, and follow the prompts.

To switch between sound modes:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Sounds and vibration > Sound mode, and then choose a mode:

• Sound: Use the sounds, vibrations, and volume levels you have chosen in Sound settings for notifications and alerts.

• Vibrate: Use vibration only for notifications and alerts.

• Mute: Set your device to make no sounds. You can also set a Temporary mute for a specific time limit.

Easy mute allows you to mute sounds and videos by covering the screen or turning over the device. To enable it:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Advanced features > Easy mute, and tap On/Off to enable.

To configure your device’s vibrations:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Sounds and vibration.

3. Tap options to customize:

• Vibrate while ringing: Set your device to vibrate in addition to ringing when you receive a call.

• Vibration intensity: Set vibration intensity levels for calls, notifications, and feedback by dragging the sliders.

• Vibration pattern: Choose from preset vibration patterns or create your own pattern.

To set the volume level for call ringtones, notifications, and other audio:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Sounds and vibration > Volume, and drag the sliders.

Note: You can also use the Volume key to adjust the volume. Tap More to customize all volume options.

To set the default of the Volume key to control the media volume:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Sounds and vibration.

3. Tap Use Volume keys for media to enable this feature.

To limit the maximum output of the device’s volume while using headphones or Bluetooth speakers:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Sounds and vibration > Volume.

3. Tap More options > Media volume limiter.

4. Tap On/Off to enable this feature.

• To set the maximum output volume, drag the Custom volume limit slider.

• To require a PIN to make changes to the volume setting, tap Set volume limit PIN.

To choose from preset ringtones or add your own:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Sounds and vibration > Ringtone.

3. Tap a ringtone to hear a preview and select it. Alternatively, tap Add to use an audio file as a ringtone.

To customize notification sounds for certain apps or choose a default for all notifications:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Sounds and vibration > Notification sounds and tap a sound to choose it.

To set your device to mute all or some notifications and sounds during specific time periods:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Sounds and vibration > Do not disturb and configure the following:

• Turn on now: Enable this option.

• Turn on as scheduled: Configure Days, Start time, and End time to set up a do not disturb schedule.

• Allow exceptions: Customize which notifications are allowed while your device is in Do not disturb mode.

• App rules: Manage rules set by apps.

• Hide visual notifications: Select options for preventing visual notifications for apps silenced by Do not disturb.

To set various other system sound options:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Sounds and vibration, and tap to enable each option:

• Touch sounds: Play tones when you touch or tap the screen to make selections.

• Screen lock sounds: Play a sound when you unlock the screen.

• Charging sound: Play a sound when a charger is connected.

• Vibration feedback: Enable vibration when the navigation keys are tapped.

To play tones when keys are tapped:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Sounds and vibration, and then tap to enable each option:

• Dialing keypad tones: Play a tone when the dialing keypad is tapped.

• Keyboard sound: Play a sound when the Samsung keyboard is tapped.

• Keyboard vibration: Enable vibrations when the Samsung keyboard is tapped.

To choose from advanced sound options to customize your audio experience:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Sounds and vibration > Sound quality and effects. The following options are available:

• Equalizer: Choose an audio preset that is customized to different genres of music.

• Advanced/Basic: Manually adjust various sound qualities.

• UHQ upscaler: Enhance the sound resolution of music and videos for a clearer listening experience.

• Surround: Recreate the richness of surround sound.

These are options available under Sound quality and effects:

• Tube Amp Pro: Simulate the soft timbre of a tube amplifier.

• Concert hall: Simulate the reverb of a concert hall.

• Adapt Sound: Customize your sound settings.

You can choose to have an app play sound on a speaker or headphones separate from the rest of the sounds on your device. To set this up:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Sounds and vibration > Separate app sound.

3. Tap On/Off to enable Separate app sound, and then set the following options:

• App: Choose an app to play its sound on a separate audio device.

• Audio device: Choose the audio device that you want the app’s sound to be played on.

To allow or block notifications from apps and services:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Notifications.

• To customize App icon badges, tap App icon badges.

• To enable notifications, tap All apps, or tap On/Off next to an app.

• To configure additional notification settings, tap Advanced.

• To customize individual notification settings, tap an app or service.

Smart alert sets the device to vibrate when you pick it up to notify you about missed calls and messages. To enable it:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Advanced features > Smart alert, and tap On/Off to enable.

To customize when the screen turns off:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Display.

3. Tap an option to customize:

• Screen timeout: Turn the screen off after a set amount of time.

• Block accidental touches: You can prevent the screen from turning on while the device is in a dark place, such as a pocket or a bag.

• Screen saver: Display colors or images after the screen has turned off or while charging.

To adjust the screen brightness:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Display.

3. Customize options under Brightness:

• Drag the Brightness slider to set a custom brightness level.

• Tap Auto brightness to automatically adjust the screen brightness based on the lighting conditions. You can also Reset usage patterns to clear your brightness adjustment history.

The Blue light filter can help you sleep better by reducing blue light at night. You can set a schedule for it:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Display > Blue light filter, and then choose one of the following options:

• Drag the Opacity slider to set the opacity of the filter.

• Tap Turn on now to enable this feature.

• Tap Turn on as scheduled to set a schedule for when Blue light filter should be enabled. You can choose Sunset to sunrise or Custom schedule.

To set the screen zoom level and the font size and style:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Display > Font and screen zoom for the following options:

• Drag the Screen zoom slider to adjust the zoom level.

• Drag the Font size slider to adjust the size of text.

• Tap a font to select it, or tap + Download fonts to find new fonts from Galaxy Apps.

3. Tap Apply to set the screen zoom and font.

To customize the screen mode to match your viewing preferences:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Display.

3. Tap Screen mode and choose Adaptive display or a specific type of screen mode based on what you are viewing.

To choose which apps you want to use in the full screen aspect ratio:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Display > Full screen apps and tap apps to enable this feature.

To light up the LED indicator when charging, voice recording, or receiving notifications:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Display > LED indicator to enable the feature.

Smart stay uses the front camera to detect your face so that the screen stays on while you are looking at it. To enable it:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Advanced features > Smart stay, and tap On/Off to enable the feature.

One-handed mode changes the screen layout to accommodate operating your device with one hand. To enable it:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Advanced features > One-handed mode.

3. Tap On/Off to enable the following methods to activate it:

• Gesture: Swipe up diagonally from either bottom corner to reduce the display size.

• Button: Tap Home three times in quick succession to reduce the display size.

The quick optimization feature improves device performance by identifying apps using excessive battery power, clearing unneeded items from memory, deleting unnecessary files, closing background apps, and scanning for malware. To use it:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Device maintenance.

3. Tap Optimize now.

To view how battery power is used and manage battery settings:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Device maintenance > Battery for options such as:

• Battery usage: View power usage by item.

• Power saving mode: Select a power mode to extend battery life.

• App power monitor: View power usage by app.

• Unmonitored apps: Select apps to exclude from being put to sleep by the App power monitor.

• Always sleeping apps: Select apps to put to sleep immediately when not being used.

• More options > Advanced settings: Configure advanced battery settings and notifications.

To optimize your device’s performance features to best fit your usage:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Device maintenance > Performance mode.

You can then choose from modes like Optimized (recommended), Game, Entertainment, or High performance.

To view the device memory and usage, and to clean storage:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Device maintenance > Storage.

• To increase available memory, tap Clean now.

If you have unmounted an optional memory card without removing it, you need to mount it before it can be accessed:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Device maintenance > Storage.

3. Tap More options > Storage settings.

4. Under Portable storage, tap your SD card, and then tap Mount.

Warning: To prevent damage to information stored on the memory card, unmount the card before removing it from the device.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Device maintenance > Storage.

3. Tap More options > Storage settings.

4. Under Portable storage, tap your SD card, and then tap Unmount.

5. Remove your memory card from the device.

Warning: When formatting an SD card, you should back up your music and photo files that are stored on the card because formatting the SD card deletes all the stored data.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Device maintenance > Storage.

3. Tap More options > Storage settings.

4. Under Portable storage, tap your SD card, tap Format, and then follow the prompts.

To check the amount of available memory (RAM) and free it up:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Device maintenance > Memory.

• The used and available memory are shown.

3. To free up as much memory as possible, tap Clean now and follow the prompts. The selected apps and services in the list will be closed.

To add languages to your list and change the device language:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > General management > Language and input > Language.

3. Tap + Add language, and select a language from the list.

4. Tap Set as default to change the device language.

• To switch to another language on the list, drag Move next to the desired language to the top of the list, and then tap Apply.

To select a default keyboard for your device’s menus and keyboards:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > General management > Language and input.

3. Tap Default keyboard, and select a keyboard.

To configure Google Voice typing:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > General management > Language and input.

3. Tap On-screen keyboard > Google voice typing. You can then configure options such as:

• Languages: Select languages for Google voice typing.

• Voice Match: Train Google Assistant to recognize your voice when you say “Ok Google”.

• Hands-free: Allow requests with the device locked.

• Speech output: Select options for spoken feedback.

• Offline speech recognition: Download and install speech recognition engines.

• Block offensive words: Hide search results that contain offensive words.

• Bluetooth headset: Records audio through a Bluetooth headset, if available.

To enable or disable on-screen keyboards:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > General management > Language and input.

3. Tap On-screen keyboard > Manage keyboards.

4. Tap each keyboard to enable or disable.

To customize options when you have a physical keyboard connected to your device (sold separately):

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > General management > Language and input.

3. Tap Physical keyboard, and then choose an option:

• Show on-screen keyboard: Show the on-screen keyboard while a physical keyboard is also being used.

• Keyboard shortcuts: Show explanations of the keyboard shortcuts on the screen.

To show a button on the Navigation bar to quickly switch between keyboards:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > General Management > Language and input.

3. Tap Show keyboard button to enable this feature.

To save time entering information using autofill services:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > General Management > Language and input.

3. Tap Autofill service and select your preferred service.

To configure your Text-to-Speech (TTS) options:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > General management > Language and input > Text-to-speech for options:

• Preferred engine: Choose either the Samsung or Google Text-to-speech engine. Tap Settings for options.

• Language: Select a default language.

• Speech rate: Set the speed at which the text is spoken.

• Pitch: Set the pitch of the speech.

• Play: Tap to play a short demonstration of speech synthesis.

• Reset: Reset the speech rate and pitch.

To configure pointer speed for an optional mouse or trackpad (not included):

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > General management > Language and input.

3. Under Pointer speed, drag the slider to the right to go faster or to the left to go slower.

By default, your device receives date and time information from the wireless network. To set it manually or change options:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > General management > Date and time. The following options are available:

• Automatic date and time: Receive date and time updates from your wireless network. When Automatic date and time is disabled, you can:

– Set date: Enter the current date.

– Set time: Enter the current time.

• Select time zone: Choose a new time zone.

• Use 24-hour format: Set the format for displaying time.

This feature sends diagnostic information about your device when you are having technical problems.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > General management > Report diagnostic information.

3. Read and accept the consent information to enable this feature.

You can reset your device to its factory default settings, which resets everything except the security, language, and account settings. Personal data is not affected.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > General management > Reset > Reset settings.

3. Tap Reset settings, and confirm when prompted.

You can reset Wi-Fi, mobile data, and Bluetooth settings with Reset network settings.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > General Management > Reset > Reset network settings.

3. Tap Reset settings, and confirm when prompted.

A Factory data reset permanently erases ALL data from the device, including Google or other account settings, system and application data and settings, downloaded applications, music, photos, videos, and other files. Data on an external SD card is not affected.

Warning: If you reset your Google Account password, it can take 24 hours for the password reset to sync with all devices registered to the account.

Note: When you sign in to a Google Account on your device, Factory Reset Protection is activated. If you reset with FRP active, you must enter the original Google Account credentials.

Before resetting your device:

1. Verify that the information you want to keep has been transferred to your storage area.

2. Log in to your Google Account and confirm your user name and password.

To reset your device:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > General management > Reset > Factory data reset.

3. Tap Reset and follow the prompts to perform the reset.

4. When the device restarts, follow the prompts to set up your device.

Adding a Google Account to your device automatically activates the Factory Reset Protection (FRP) security feature. FRP prevents other people from using your device if it is reset to factory settings without your permission.

To disable FRP, remove all Google Accounts from the device. Caution: Before shipping your device back to Samsung or taking it to a service center, you should remove your Google Account before resetting the device to factory settings.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Cloud and accounts > Accounts > [Google account].

3. Tap Remove account.

Auto restart optimizes your device by restarting it automatically at set times. Any unsaved data will be lost when the device restarts.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > General management > Reset > Auto restart.

3. Tap On/Off to activate Auto restart, and then set the following parameters:

• Time: Set the time of day to restart your device.

• Day: Select the day of the week to automatically restart your device.

To check for and install available software updates for your device:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Software update for the following options:

• Check for updates: Manually check for software updates.

• Continue update: Resume an update that was interrupted.

It is recommended that you secure your device using a secure screen lock (Pattern, PIN, or Password).

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > Screen lock type and tap a secure screen lock (Pattern, PIN, or Password).

3. Tap On/Off to enable showing notifications on the lock screen. The following options are available:

• Hide content: Enable to hide the content of notifications.

• Notification icons only: Enable to hide notification details and show only the icon.

• Transparency: Adjust the transparency of notifications.

• Auto-reverse text color: Reverse the color of notification text automatically based on the background color.

4. Tap Done when finished.

5. Configure the following screen lock options:

• Smart Lock: Unlock your device automatically when trusted locations or other devices have been detected. A secure screen lock is required for this feature.

• Secure lock settings: Customize your secure lock settings. A secure screen lock is required for this feature.

To configure display settings for the Lock screen and Always On Display:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security for options:

• Clock and FaceWidgets: Customize the clock, FaceWidgets, and contact information that displays on the Lock screen and Always On Display screen.

• Notifications: Select which notifications to display on the Lock screen and Always On Display screen.

• App shortcuts: Select which apps to open from the Lock screen.

To configure app safety checks from Google Play:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > Google Play Protect.

3. Tap options to customize security.

Find My Mobile helps protect your device from loss or theft, allowing it to be locked, tracked, and data to be deleted remotely. You must sign up for a Samsung account and enable Google location service.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > Find My Mobile.

3. Enter your Samsung account password or, if you are not logged in, tap Add account and follow the prompts. The following options are available:

• Remote controls: Activate or deactivate Remote controls, which allows you to access your device remotely.

• Google location service: Activate or deactivate Google location service. This service must be on in order to find your device.

• Send last location: Allow your device to send its last location to the Find My Mobile server when the battery falls below a certain level.

To check the date of the last security software update and see if the latest update is installed:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > Security update.

Use Samsung Pass to access your favorite services with biometric data. You must sign in to your Samsung account to use Samsung Pass.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > Samsung Pass.

3. Follow the prompts to sign in to your Samsung account and add your biometric data.

Secure Folder locks your private content and apps to enhance security. You must sign in to your Samsung account and set a secure lock for your device to use Secure Folder.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > Secure Folder and follow the prompts to secure content on your device.

The App permission monitor notifies you when permissions you select are being used by apps running in the background.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > App permission monitor.

3. Tap On/Off next to the apps you want to be notified about when they use certain permissions.

Secure startup protects your device by requiring a numeric PIN, pattern, or password to be entered before it starts up. You must have a secured screen lock for this option to be available.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > Secure startup and select an option.

To protect your optional memory card (not included) by encrypting its data:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > Encrypt SD card.

3. Tap Encrypt SD card and follow the prompts to encrypt all data on your memory card.

To require a password to reset your device to factory default settings:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > Other security settings > Set up/change password and enter a password.

To require your SIM card PIN to unlock and use your SIM card:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > Other security settings > Set up SIM card lock and follow the prompts.

• Tap Lock SIM card to enable the feature.

• Tap Change SIM card PIN to create a new PIN.

To display password characters briefly as you type them:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > Other security settings > Make passwords visible to enable the feature.

To manage how your device receives security updates:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > Other security settings for the following Security update service options:

• Security policy updates: Automatically or manually check for security policy updates. Automatic updates can also be limited to only when your device is connected to a Wi-Fi network.

• Send security reports: Use Wi-Fi to send security reports to Samsung for threat analysis.

To manage your device administrators and application installation privileges:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > Other security settings > Device admin apps.

3. Tap an option to enable it as a device administrator.

To manage your security certificates (disable or remove):

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > Other security settings for the following options related to credential storage:

• Storage type: Select a storage location for credential contents.

• View security certificates: Display certificates in your device’s ROM and other certificates you have installed.

• User certificates: View user certificates.

• Install from device storage: Install a new certificate from storage.

• Clear credentials: Erase the credential contents from the device and reset the password.

To use options to configure advanced security settings:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Lock screen and security > Other security settings for the following advanced options:

• Trust agents: Perform selected actions when trusted devices are connected. This option is only displayed when a lock screen is enabled.

• Pin windows: Pin an app on your device screen, preventing access to other features of your device.

• Usage data access: View the applications that can access your device’s usage history.

• Notification access: View the applications that can access notifications you receive on your device.

• Do not disturb permission: View which apps have permission to change the Do not disturb settings.

Samsung Cloud helps keep your data safe by backing up and restoring your device, and syncing data across multiple devices.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Cloud and accounts > Samsung Cloud.

• If a Samsung account has not been added, follow the prompts to add one.

3. Once a Samsung account is configured, you can view and manage items stored in the Samsung Cloud.

You can add and manage all your email, social networking, and picture and video sharing accounts.

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Cloud and accounts > Accounts > + Add account.

3. Tap one of the account types.

4. Follow the prompts to enter your credentials and set up the account.

• Tap Auto sync data to enable automatic updates to your accounts.

Each account has its own set of settings. To configure common settings or individual account settings:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Cloud and accounts > Accounts > [Account type].

3. Tap an account to configure that account’s sync settings.

4. Tap other available options for the account type.

You can remove accounts from your device:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Cloud and accounts > Accounts > [Account type].

3. Tap the account and then tap Remove account.

To enable backup of your information to your Samsung account:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Cloud and accounts > Backup and restore for options:

• Back up data: Configure your Samsung account to back up your data.

• Restore data: Use your Samsung account to restore your backup data.

To enable backup of your information to your Google account:

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Cloud and accounts > Backup and restore for options:

• Back up my data: Enable back up of application data, Wi-Fi passwords, and other settings to Google servers.

• Backup account: Select a Google Account to be used as your backup account.

• Automatic restore: Enable automatic restoration of settings from Google servers.

To configure your device’s Google settings (available options depend on your Google account):

1. From a Home screen, swipe up to access Apps.

2. Tap Settings > Google, and select an option to customize.