SAMSUNG GALAXY S10+ (S10PLUS) (02) PDF MANUAL

Slide the SIM card and optional microSD™ card (sold separately) into the tray with the gold contacts facing down.

Before turning on your device, charge it fully.

Use only charging devices and batteries that are approved by Samsung. Samsung charging devices and batteries are designed for your device to maximize battery life. Using other charging devices and batteries may void your warranty and may cause damage.

Your device is IP68 rated for dust and water resistance. To maintain the water-resistant and dust-resistant features of your device, make sure that the SIM card/Memory card tray openings are maintained free of dust and water, and the tray is securely inserted prior to any exposure to liquids.

While charging, the device and the charger may become hot and stop charging. This usually does not affect the device’s lifespan or performance and is in the normal range of operation. Remove the device from the charger and wait for the device to cool down.

For best results when using Wireless PowerShare, please note:

Remove any accessories or covers before using the feature. Depending on the type of accessory or cover, Wireless PowerShare may not work properly.

The location of the wireless charging coil may vary by device, so you may need to adjust the placement to make a connection. When charging starts, a notification or vibration will occur, so the notification will help you know you have made a connection.

Call reception or data services may be affected, depending on your network environment.

Charging speed or efficiency can vary depending on device condition or surrounding environment.

Do not use headphones.

Only devices that support the wireless charging feature can be charged using this feature. Some devices may not be charged.

To charge properly, do not move or use either device while charging.

If the remaining battery power drops below a certain level, power sharing will stop.

Wireless PowerShare is limited to Samsung or other brand smartphones and accessories with WPC Qi wireless charging. It may not work with certain accessories, covers, or other brand devices. It may affect call reception or data services depending on your network environment. Speed and power efficiency of charge varies by device.

1. From Quick Settings, tap Wireless PowerShare.

2. With the phone face down, place the compatible device on the back of the phone to charge. A notification sound or vibration occurs when charging begins.

Use the Power key to turn your device on or off. Do not use the device if the body is cracked or broken. Use the device only after it has been repaired.

Press and hold the Power key.

To turn the device off, press and hold the Power key, and tap Power off. Confirm when prompted.

To restart your device, press and hold the Power key, and tap Restart.

The first time you turn your device on, the Setup Wizard guides you through the basics of setting up your device.

Follow the prompts to choose a default language, connect to a Wi-Fi® network, set up accounts, choose location services, learn about your device’s features, and more.

Use Smart Switch™ to transfer contacts, photos, music, videos, messages, notes, calendars, and more from your old device. Smart Switch can transfer your data via USB cable, Wi-Fi, or computer. You can also use the included On-the-Go adapter to transfer content quickly and easily from your old device without installing the Smart Switch app.

1. From Settings, tap Accounts and backup > Smart Switch.

2. Follow the prompts and select the content to transfer.

The USB option must be set to Media device (MTP) on the other device. Transferring content with a USB cable may increase battery consumption. Make sure your battery is fully charged.

Use your device’s screen lock features to secure your device. By default, the device locks automatically when the screen times out.

Press the Power key to lock. Press the Power key to turn on the screen, and then drag your finger across the screen to unlock.

Sign in to your Google Account to access your Google cloud storage, apps installed from your account, and make full use of your device’s Android™ features.

1. From Settings, tap Accounts and backup > Accounts.

2. Tap + Add account > Google.

When you sign in to a Google Account, Factory Reset Protection (FRP) is activated. FRP requires your Google Account information when resetting to factory settings.

Sign in to your Samsung account to access exclusive Samsung content and make full use of Samsung apps.

1. From Settings, tap Accounts and backup > Accounts.

2. Tap + Add account > Samsung account.

TIP: To quickly access your Samsung account, from Settings tap Samsung account.

Sign in to one or more of your email accounts to view and manage email messages.

From Settings, tap Accounts and backup > Accounts, and then tap + Add account > Email.

You can set up your voicemail service when you access it for the first time. You can access voicemail through the Phone app.

1. From Phone, touch and hold the 1 key.

2. Follow the tutorial to create a password, record a greeting, and record your name.

A touch screen responds best to a light touch from the pad of your finger or a capacitive stylus. Using excessive force or a metallic object on the touch screen may damage the tempered glass surface and void the warranty.

Lightly touch items to select or launch them.

Tap an item to select it.

Double-tap an image to zoom in or out.

Lightly drag your finger across the screen.

Swipe the screen to unlock the device.

Swipe the screen to scroll through the Home screens or menu options.

Touch and hold an item, and then move it to a new location.

Drag an app shortcut to add it to a Home screen.

Drag a widget to place it in a new location.

Bring your thumb and forefinger together or apart to zoom in and out.

Bring your thumb and forefinger together on the screen to zoom out.

Move your thumb and forefinger apart on the screen to zoom in.

Touch and hold items to activate them.

Touch and hold a field to display a pop-up menu of options.

Touch and hold a Home screen to customize the Home screen.

To make more space on the screen, you can hide the navigation keys, and instead use gestures to navigate the device. Simply swipe up on the screen where the navigation buttons normally are to navigate the device.

From Settings, tap Display > Navigation bar > Full screen gestures.

Tap Gesture hints to display lines at the bottom of the screen where gestures must be done for each navigation button.

TIP: You can also quickly switch between navigation gestures and navigation buttons using the Quick settings menu.

Personalize your device by changing where the Recent apps and Back buttons display on the Navigation bar.

From Settings, tap Display > Navigation bar, and tap an option under Button order.

You can use app icons to launch an app from any Home screen.

From Apps, touch and hold an app icon, and tap + Add to Home.

Touch and hold an app icon, and tap Remove from Home.

Removing an icon does not delete the app, it just removes the icon from a Home screen.

No, removing an icon does not delete the app, it just removes the icon from a Home screen.

You can change the look of the Home and Lock screens by choosing a favorite picture or preloaded wallpaper.

1. From a Home screen, touch and hold the screen.

2. Tap Wallpapers.

3. Tap View all to see all available wallpapers.

4. Tap an image to choose it.

Tap the screen or screens to which you want to apply the wallpaper.

5. Tap Set as wallpaper, and confirm when prompted.

Set a theme to be applied to your Home and Lock screens, wallpapers, and app icons.

1. From a Home screen, touch and hold the screen.

2. Tap Themes to customize.

3. Tap View all to see downloaded themes.

4. Tap a theme to preview and download it to My themes.

5. Tap a theme, and then tap Apply to apply the selected theme.

Apply different icon sets to replace the default icons.

1. From a Home screen, touch and hold the screen.

2. Tap Wallpapers > Icons to customize.

3. Tap View all to see downloaded icons.

4. Tap an icon set to preview and download it to My icons.

5. Tap an icon, and then tap Apply to apply the selected icon set.

Add widgets to your home screens for quick access to info or apps.

1. From a Home screen, touch and hold the screen.

2. Tap Widgets, and then touch and hold a widget, drag it to a Home screen, and release it.

Once you have added a widget, you can customize where it’s located and how it functions.

From a Home screen, touch and hold a widget, and tap an option:

Remove from Home: Delete a widget from your screen.

Widget settings: Customize the function or appearance of the widget.

App info: Review the widget usage, permissions and more.

Customize your Home and Apps screens.

1. From a Home screen, touch and hold the screen.

2. Tap Home screen settings to customize:

Home screen layout: Set your device to have separate Home and Apps screens, or only a Home screen where all apps are located.

Home screen grid: Choose a layout to determine how icons are arranged on the Home screen.

Apps screen grid: Choose a layout to determine how icons are arranged on the Apps screen.

Apps button: Add a button to the Home screen for easy access to the Apps screen.

App icon badges: Enable to show badges on apps with active notifications. You can also choose the badge style.

Lock Home screen layout: Prevent items on the Home screen from being removed or repositioned.

Add apps to Home screen: Automatically add newly-downloaded apps to the Home screen.

Quick-open notification panel: Enable this feature to open the Notification panel by swiping down anywhere on the Home screen.

Rotate to landscape mode: Rotate the Home screen automatically when your device’s orientation is changed from portrait to landscape.

Hide apps: Choose apps to hide from the Home and App screens. Return to this screen to restore hidden apps. Hidden apps are still installed and can appear as results in Finder searches.

About Home screen: View version information.

The Easy mode layout has larger text and icons, making for a more straightforward visual experience. Switch between the default screen layout and a simpler layout.

1. From Settings, tap Display > Easy mode.

2. Tap Easy mode to enable this feature.

3. Tap Apply to confirm.

1. From Settings, tap Display > Easy mode > Standard mode.

2. Tap Apply to exit Easy mode.

Configure display options for the Status bar.

From Quick settings, tap More options > Status bar for the following options:

Show notification icons: Choose how to display notification icons on the Status bar.

Show battery percentage: Display the battery charge percentage next to the battery icon on the Status bar.

You can access the Notification panel from any screen.

1. Drag the Status bar down to display the Notification panel.

2. Swipe down the list to see notification details.

To open an item, tap it.

To clear a single notification, drag the notification left or right.

To clear all notifications, tap Clear.

To customize notifications, tap Notification settings.

3. Drag upward from the bottom of the screen or tap Back to close the Notification panel.

The Notification panel also provides quick access to device functions using Quick settings.

1. Drag the Status bar down to display the Notification panel.

2. Drag – View all downward.

Tap a quick setting icon to turn it on or off.

Touch and hold a quick setting icon to open the setting.

Tap Search to search the device.

Tap Settings to quickly access the device’s settings menu.

Tap More options to reorder Quick settings or to change the button layout.

3. Drag – View all upward to close Quick settings.

The Bixby Home page displays customized content based on your interactions. Bixby learns from your usage patterns and will suggest content you may like.

From a Home screen, swipe right or press the Bixby key.

Bixby Voice allows you to use voice commands for opening apps, changing settings, entering text, and more.

1. Press and hold the Bixby key.

2. Say a command.

3. Release the Bixby key when you are finished speaking.

Activate Bixby at any time by saying “Hi Bixby” when this feature is enabled.

1. Press the Bixby key.

2. Tap More options > Settings > Voice wake-up.

3. Tap On/Off, and then follow the prompts.

You can use Bixby to show you information or change device settings based on where you are and what you are doing.

From Settings, tap Advanced features > Bixby Routines.

Bixby Vision is available on the Camera viewfinder to help understand what you see.

From Camera, tap Bixby Vision and follow the prompts.

Bixby Vision can be used on pictures and images saved in the Gallery app.

1. From Gallery, tap a picture to view it.

2. Tap Bixby Vision and follow the prompts.

Bixby Vision can help you find out more about an image you find in the Internet app.

1. From Internet, touch and hold an image until a pop-up menu is displayed.

2. Tap Bixby Vision and follow the prompts.

You can monitor and manage your digital habits by getting a daily view of how frequently you use apps, how many notifications you receive, and how often you check your device. You can also set your device to help you wind down before going to bed.

From Settings, tap Digital wellbeing for the following features:

Screen time: Tap the time value in the dashboard circle for details on how long each app has been opened and used today.

Times opened: Tap the Unlocks number to see how many times each app has been opened today.

Notifications received: Tap the Notifications number to see how many notifications have been received from each app today.

Dashboard: View all dashboard information shown above. Each app can have a timer set to limit usage throughout the day.

Wind down: Enable to turn the screen to grayscale and limit notifications before going to bed.

Notifications: Configure notification settings for each app.

View missed calls and message alerts, check the time and date, and view other customized information without unlocking your device using Always On Display (AOD).

1. From Settings, tap Lock screen > Always On Display.

2. Tap to enable the feature, and then set the following options:

Display mode: Customize when to show the AOD.

Screen orientation: Display the AOD in portrait or landscape mode.

Show music information: Show music details when the FaceWidgets music controller is in use.

Auto brightness: Automatically adjust the brightness of Always On Display.

About Always On Display: View the current software version and license information.

Some display settings can appear on both the Lock screen and Always On Display.

Apply custom themes for Always On Display.

1. From a Home screen, touch and hold the screen, and tap Wallpapers > AODs.

Tap an AOD to preview and download it to My Always On Displays.

2. Tap View all to see downloaded AODs.

3. Tap an AOD, and then tap Set to apply the selected AOD.

Face recognition is less secure than Pattern, PIN, or Password. Your device could be unlocked by someone or something that looks like your image.

Some conditions may affect face recognition, including wearing glasses, hats, beards, or heavy make-up.

When registering your face, ensure that you are in a well-lit area and the camera lens is clean.

You can enable Face Recognition to unlock your screen.

1. From Settings, tap Biometrics and security > Face recognition.

2. Follow the prompts to register your face.

TIP: To use your face to unlock your device, you must set a pattern, PIN, or password.

Customize how face recognition works.

From Settings, tap Biometrics and security > Face recognition.

Remove face data: Delete existing faces.

Face unlock: Enable or disable face recognition security.

Stay on Lock screen: When you unlock your device with face recognition, stay on the Lock screen until you swipe the screen.

Faster recognition: Turn on for faster face recognition. Turn off to increase security and make it harder to unlock using an image or video of your likeness.

Brighten screen: Increase the screen brightness temporarily so that your face can be recognized in dark conditions.

Samsung Pass: Access your online accounts using face recognition.

Use fingerprint recognition as an alternative to entering passwords in certain apps. You can also use your fingerprint to verify your identity when logging in to your Samsung account.

1. From Settings, tap Biometrics and security > Fingerprints.

2. Follow the prompts to register your fingerprint.

TIP: To use your fingerprint to unlock your device, you must set a pattern, PIN, or password. You can register up to three fingerprints.

Add, delete, and rename fingerprints.

From Settings, tap Biometrics and security > Fingerprints for the following options:

The list of registered fingerprints is at the top of this list. You can touch and hold a fingerprint to remove or rename it.

Add fingerprint: Simply follow the prompts to register another fingerprint.

Check added fingerprints: Scan your fingerprint to see if it has been registered.

Use fingerprint recognition to verify your identity in supported apps and actions.

From Settings, tap Biometrics and security > Fingerprints.

Fingerprint unlock: Use your fingerprint for identification when unlocking your device.

Show icon when screen is off: Show the fingerprint icon when the screen is off.

Samsung Pass: Use your fingerprint for identification when using supported apps.

Samsung Pay: Use your fingerprints to make payments quickly and securely.

Configure your preferences for biometric security options.

From Settings, tap Biometrics and security > Biometrics preferences for the following options:

Preferred biometric: Choose your preferred biometric. Only biometrics that have already been set up are listed.

Screen transition effect: Show a transition effect when you use biometrics to unlock your device.

Multitask by using two apps at the same time. Apps that support Multi window™ can be displayed together on a split screen. You can switch between the apps and adjust the size of their windows.

1. From any screen, tap Recent apps.

2. Tap the app icon, and then tap Open in split screen view.

3. Tap an app in the lower window to add it to the split screen view.

Drag the middle of the window border to adjust the window size.

TIP: After opening Multi window, you can quickly exit and open the split screen by tapping Recent apps.

Edge panels can be used to access apps, tasks, and contacts, as well as view news, sports, and other information on the Edge screen.

From any screen, drag the Edge panel handle to the center of the screen. Swipe left or right to view other panels.

1. From any screen, drag the Edge panel handle to the center of the screen, and then tap Edge panel settings.

2. Tap to enable the feature. The following options are available:

Checkbox: Enable or disable each panel.

Edit (if available): Configure individual panels.

More options > Reorder: Change the order of the panels by dragging them to the left or right.

More options > Uninstall: Remove an Edge panel from your device.

More options > Edge panel handle:

Move: Drag to change the position of the Edge panel handle along the edge of the screen.

Position: Choose either Right or Left to set which side the Edge screen displays on.

Move from any screen: Touch and hold the Edge panel handle to change its position from any screen.

Color: Choose the color of the Edge panel handle.

Transparency: Drag the slider to adjust the transparency of the Edge panel handle.

Size: Drag the slider to adjust the size of the Edge panel handle.

More options > Galaxy Store: Search for and download more Edge panels from Galaxy Store.

3. Tap Back to save changes.

You can add up to ten apps in two columns to the Apps edge panel.

1. From any screen, drag the Edge panel handle to the center of the screen. Swipe until the Apps edge panel is displayed.

2. Tap an app or app pair to open it.

1. From any screen, drag the Edge panel handle to the center of the screen. Swipe until the Apps edge panel is displayed.

2. Tap + Add app to add other apps to the Apps edge.

To add an app to the Apps edge, find it on the left side of the screen and tap it to add it to an available space on the right column.

To create a shortcut for two apps to open in Multi window, tap Create app pair.

To create a folder shortcut, drag an app from the left side of the screen on top of an app in the columns on the right.

To change the order of the apps on the Edge panel, drag each app to the desired location.

To remove an app, tap Remove.

3. Tap Back to save changes.

Set the Edge screen to light up when you receive calls or notifications while the device is turned over.

1. From Settings, tap Display > Edge screen > Edge lighting.

2. Tap to enable the feature.

3. Tap Show Edge lighting, and tap one of the following options:

While screen is on: Show Edge lighting only when the screen is on.

While screen is off: Show Edge lighting only when the screen is off.

Always: Show Edge lighting at all times.

Customize the color, width, and transparency of the Edge lighting feature.

1. From Settings, tap Display > Edge screen > Edge lighting.

2. Tap Edge lighting style to customize:

Effect: Choose an edge effect.

Color: Choose a preset or custom color, and enable app colors.

Transparency: Drag the Transparency slider to adjust the transparency of the Edge lighting.

Width: Drag the Width slider to adjust the width of the Edge lighting.

Duration: Adjust how short or long the Edge lighting displays.

3. Tap Done when finished.

You can tap or swipe the Edge lighting pop-up to open an app, open an app in a pop-up, or dismiss a notification.

1. From Settings, tap Display > Edge screen > Edge lighting.

2. Tap Edge lighting interaction, and then tap to enable the feature.

1. From Settings, tap Display > Edge screen > Edge lighting.

2. Tap Manage notifications to choose the apps that can activate Edge lighting when a notification is received.

From Settings, tap Display > Edge screen > About Edge screen.

Text can be entered using a keyboard or your voice.

Tap a field to display the Samsung keyboard.

Tap (T) Show predictive text to view suggested words while you type.

Tap Show toolbar functions to view all keyboard options.

• Clipboard: Access the clipboard.

• Emojis: Insert an emoji.

• GIF GIF keyboard: Add animated GIFs.

• Live message: Record an animated drawing or written message.

• Modes: Select a keyboard layout.

• Settings: Access keyboard settings.

• Stickers: Add illustrated stickers.

• Text editing panel: Use an editing panel to help pinpoint text that you want to cut, copy, and paste.

• Voice input: Use Samsung voice input.

From the Samsung keyboard, tap Settings for the following options:

• Languages and types: Set the keyboard type and choose which languages are available on the keyboard. To switch between languages, slide the Space bar sideways.

• Smart typing: Use predictive text and auto-correction features to prevent common typing mistakes. Type by swiping between letters.

• Keyboard layout and feedback: Customize the appearance and function of the keyboard.

• Reset to default settings: Return keyboard to original settings and clear personalized data.

• About Samsung keyboard: View version and legal information for the Samsung keyboard.

1. From the Samsung keyboard, tap Voice input.

2. Tap the screen and speak your text.

1. From the Samsung keyboard, tap Voice input.

2. Tap Settings for options.

• Keyboard language: Choose the language for the keyboard.

• Voice input language: Select the language for Samsung voice input.

• Hide offensive words: Hide potentially offensive words with asterisks.

• About Samsung voice input: View version and legal information for Samsung voice input.

• Restricts application usage to only essential applications and those you select.

• Turns off connectivity features and Mobile data when the screen is off.

1. Press and hold the Power key.

2. Tap Emergency mode. (When accessing for the first time, read and accept the terms and conditions.)

3. Tap Turn on.

• Flashlight: Use the device’s flash as a steady source of light.

• Emergency alarm: Sound an audible siren.

• Share my location: Send your location information to your emergency contacts.

• Phone: Launch the call screen.

• Internet: Launch the web browser.

• + Add: Email: Launch the Email app. Maps: Launch Google Maps™.

• Battery charge: Displays estimated battery charge percentage.

• Estimated battery life: Displays estimated remaining battery charge time based on current battery charge and usage.

• Emergency call: Dial the emergency telephone number (for example, 911). This kind of call can be made even without activated service.

• More options:

– Turn off Emergency mode: Disable Emergency mode and return to standard mode.

– Remove apps: Choose apps to remove from the screen.

– Manage emergency contacts: Manage your medical profile and ICE (In Case of Emergency) group contacts.

– Settings: Configure the available settings. Only a limited number of settings are enabled in Emergency mode.

1. Press and hold the Power key.

2. Tap Emergency mode.

When Emergency mode is activated, Locating method is set to Battery saving. After Emergency mode is turned off, you may need to adjust your location settings.

From a Home screen, swipe the screen upward to access the Apps list.

From Apps, touch and hold an app, and tap Uninstall/Disable.

1. From Apps, tap Finder search, and enter a word or words. As you type, matching apps and settings appear as results on the screen.

2. Tap a result to go to that app.

You can customize the search settings by tapping More options > Finder settings.

From Apps, tap More options > Sort for the following sorting options:

• Custom order: Arrange apps manually.

• Alphabetical order: Sort apps alphabetically.

When apps are arranged manually (Custom order), empty icon spaces can be removed by tapping More options > Clean up pages.

1. From Apps, touch and hold an app shortcut, and then drag it on top of another app shortcut until it is highlighted.

2. Release the app shortcut to create the folder.

• Enter folder name: Name the folder.

• Palette: Change the folder color.

• + Add apps: Place more apps in the folder. Tap apps to select them, and then tap Add.

3. Tap Back to close the folder.

From Apps, touch and hold a folder, and tap + Add to Home.

1. From Apps, touch and hold a folder to delete.

2. Tap Delete folder, and confirm when prompted.

From Apps, tap More options > Galaxy Essentials.

From Apps, tap Galaxy Store.

From Apps, tap Samsung folder > Wear Galaxy Wearable.

From Apps, tap Samsung folder > 8 Samsung Health.

Particularly if you have any of the following conditions:

• Heart disease; Asthma or lung disease; Diabetes, or liver or kidney disease; and Arthritis.

• Pain or discomfort in your chest, neck, jaw, or arms during physical activity;

• Dizziness or loss of consciousness;

• Shortness of breath with mild exertion or at rest, or when lying down or going to bed;

• Ankle swelling, especially at night;

• A heart murmur or a rapid or pronounced heartbeat;

• Muscle pain when walking upstairs or up a hill that goes away when you rest.

From Apps, tap Samsung Notes > + Create.

1. From Samsung Notes, tap a note to view it.

2. Tap Edit, and make changes. When you are finished, tap Save.

From Samsung Notes, tap More options for the following options:

• Edit: Select notes to share, delete, or move.

• Sort by: Change the way notes are organized.

• View by: Switch between Grid, List, or Simple list.

From Samsung Notes, tap Menu for the following options:

• All notes: View all notes.

• Trash: View deleted notes.

• Categories: View notes by category.

From Apps, tap Pay Samsung Pay, and tap Get started and follow the prompts.

1. From Pay Samsung Pay, select a card to pay with and authorize payments by scanning your finger or by entering your Samsung Pay PIN.

2. Hold your phone over the store’s card reader. (When your payment is complete, a receipt is sent to your registered email.)

Make sure the NFC feature is enabled on your device.

1. From Pay Samsung Pay, tap More options > Settings > Use Favorite Cards.

2. Tap On/Off to enable Simple Pay on each screen.

1. From any screen, swipe up from the bottom of the screen. (Your payment card and Simple Pay are displayed.)

2. Drag the card down to close Simple Pay.

If your device is ever lost, you can use the Find My Mobile function to remotely wipe your data for even more protection.

From Apps, tap Samsung folder > SmartThings, and sign in with your Samsung account.

From Apps, tap Calculator.

If icon is not visible, turn your phone landscape.

From Apps, tap 1 Calendar.

Tap the menu icon.

Tap the “today” icon.

Double-tap to edit event.

Tap the “+” icon.

1. From Calendar, tap Menu.

2. Tap Settings > Add new account, and select an account type.

3. Enter your account information and follow the prompts.

1. From Calendar, tap + Add to add an event.

2. Enter details for the event, and then tap Save.

1. From Calendar, tap an event, and tap again to edit it.

2. Tap Delete, and confirm when prompted.

From Apps, tap Camera.

If Quick launch is enabled, quickly press the Power key twice.

From Camera, set up your shot with the following features:

• Tap the screen where you want the camera to focus. (When you tap the screen, a brightness scale appears. Drag the light bulb to adjust the brightness.)

• To quickly switch between the front and rear cameras, swipe the screen up or down.

• To change to a different shooting mode, swipe the screen right or left.

• To change camera settings, tap Settings.

Tap Capture.

1. From Camera, swipe left to Super slow-mo.

2. Tap Super Slow-mo to record.

Hold your device steady for best results.

1. From Camera, tap AR Emoji > Create my emoji.

2. Tap Capture, and follow the prompts to create your emoji.

1. From Camera, swipe right or left to change the shooting mode to Video.

2. Tap Capture to begin recording a video.

• To take a picture while recording, tap Capture.

• To temporarily stop recording, tap Pause. To continue recording, tap Resume.

3. Tap Stop when you are finished recording.

From Camera, the shooting modes are located in a row above Capture.

• To change the shooting mode, swipe the screen right or left.

• To view the entire list of shooting modes and each mode’s description, touch and hold a shooting mode.

From Camera, swipe to the right or left to see the available shooting modes. To view and reorganize all available shooting modes, touch and hold a shooting mode. Available modes include:

• Food: Take pictures that emphasize the vivid colors of food.

• Panorama: Create a linear image by taking pictures in either a horizontal or vertical direction.

• Pro: Manually adjust the ISO sensitivity, exposure value, white balance, and color tone while taking pictures.

• Live focus: Take artistic pictures by adjusting the depth of field.

• Photo: Allow the camera to determine the ideal mode for the picture.

• Video: Allow the camera to determine the ideal mode for the video.

• Super slow-mo: Record videos at an extremely high frame rate for viewing in high quality slow motion. You can play a specific section of each video in slow motion after recording it.

• Slow motion: Record videos at a high frame rate for viewing in slow motion.

• Hyperlapse: Create a time lapse video by recording at various frame rates. The frame rate is adjusted depending on the scene being recorded and the movement of the device.

From Camera, tap Settings for the following options under Intelligent features:

• Scene optimizer: Automatically adjust the color settings of your pictures to match the subject matter.

• Shot suggestions: Get tips to help you choose the best shooting mode.

• Flaw detection: Receive warning when someone blinks, the subject is not in focus, or the lens needs cleaning.

From Camera, tap Settings for the following options under Pictures:

• Motion photos: Create a short video by taking pictures.

• Hold Shutter button to: Choose whether to take a picture, take a burst shot, or create a GIF when holding the shutter button down.

• Save options: Choose picture format and whether to flip your selfies.

From Camera, tap Settings for the following options under Videos:

• Rear video size: Choose resolution and aspect ratio for videos recorded with the rear camera.

• Front video size: Choose resolution and aspect ratio for videos recorded with the front camera.

• Advanced recording options: Choose to record in either HDR10+ or HEVC formats.

From Camera, tap Settings, then under Videos, find and enable Video stabilization to activate anti-shake to keep the focus steady when the camera is moving.

From Camera, tap Settings for the following options under Useful features:

• HDR (rich tone): Enables the light sensitivity and color depth features of the device to produce a brighter and richer picture.

• Tracking auto-focus: Keep a moving subject in focus.

• Grid lines: Display viewfinder grid lines to help compose a picture or video.

• Location tags: Attach a GPS location tag to the picture.

• Selfie shape correction: Automatically correct face shapes in selfies.

• Camera modes: Set the default camera mode. You can also reorder or hide your shooting modes.

From Camera, tap Settings, then under Shooting methods:

– Press Volume key to: Use the Volume key to take pictures, record video, zoom, or control system volume.

– Voice control: Take pictures speaking key words.

– Floating Shutter button: Add an extra shutter button that you can move anywhere on the screen.

– Show palm: Hold your hand out with your palm facing the camera to have your picture taken in a few seconds.

From Camera, tap Settings, then under Useful features, tap Storage location: Select a memory location. (A memory card (not included) must be installed to view Storage location.)

From Camera, tap Settings for the following options:

• Quick launch: Press the Power key twice in quick succession to open the camera.

• Quick review: Review pictures after taking them.

• Shutter sound: Play a tone when taking a picture.

• Reset settings: Reset the camera settings.

• About Camera: View app and software information.

From Apps, tap Contacts > + Create contact.

You can take a new photo or select one from the Gallery.

Use the plus and minus icons to Add, delete, and expand additional fields.

1. From Contacts, tap a contact.

2. Tap Edit.

3. Tap any of the fields to add, change, or delete information.

4. Tap Save.

1. From Contacts, tap a contact.

2. Tap Call or Message.

From Settings, tap Advanced features > Direct share, and tap to enable the feature.

1. From Contacts, tap a contact.

2. Tap Add to Favorites to mark the contact as a favorite.

To remove the contact from Favorites, tap Favorite.

1. From Contacts, tap a contact.

2. Tap Share.

3. Tap either vCard file (VCF) or Text.

4. Choose a sharing method and follow the prompts.

1. From Contacts, tap Menu > Groups.

2. Tap Create group, and then tap fields to enter information about the group:

• Group name: Enter a name for the new group.

• Group ringtone: Customize the sounds for the group.

• Add member: Select contacts to add to the new group, and then tap Done.

3. Tap Save.

From Contacts, tap Menu > Groups, and then tap a group.

• To remove a contact, touch and hold a contact to select it, and then tap Delete.

• To add a contact, tap More options > Edit group > Add member, and then tap the contacts you want to add. When finished, tap Done > Save.

1. From Contacts, tap Menu > Groups, and then tap a group.

2. Tap More options > Send message.

1. From Contacts, tap Menu > Groups, and then tap a group.

2. Tap More options > Send email.

3. Tap contacts to select them, or tap the All checkbox at the top of the screen to select all, and then tap Done. (Only group members that have an email address in their records are displayed.)

4. Choose an email account and follow the prompts.

1. From Contacts, tap Menu > Groups, and then tap a group.

2. Tap More options > Delete group.

• To only delete the group, tap Group only.

• To delete the group and the contacts in the group, tap Group and members.

1. From Contacts, tap Menu > Manage contacts.

2. Tap Import/Export contacts.

3. Tap Import and follow the prompts.

1. From Contacts tap Menu > Manage contacts.

2. Tap Import/Export contacts.

3. Tap Export and follow the prompts.

1. From Contacts, tap the contact to select it.

2. Tap More options > Link to another contact.

3. Tap contacts to choose them.

4. Tap Link.

1. From Contacts, tap the contact to select it.

2. Tap More options > Add/remove linked contacts.

3. Tap Unlink beside contacts to unlink them from the main contact.

1. From Contacts, touch and hold a contact to select it. (You can also tap other contacts to select them for deletion.)

2. Tap Delete, and confirm when prompted.

From Apps, tap Clock, and tap a tab to use a feature.

Tap the + icon.

Tap the toggle switch next to the alarm.

1. From Clock, tap + Add alarm.

2. Tap the following items to configure an alarm:

• Time: Set a time for the alarm.

• Date: Choose the day for this alarm.

• Alarm name: Enter a name for the alarm.

• Alarm sound: Choose a sound to play for the alarm, and drag the slider to set the volume of the alarm.

• Vibration: Choose whether the alarm uses vibration alert.

• Snooze: Allow snoozing. Set interval and repeat values for the alarm while snoozing.

3. Tap Save to save the alarm.

1. From Clock, touch and hold an alarm.

2. Tap Delete.

1. From Clock, tap World clock.

2. Tap + Add city > Search for city, and enter the name of the city.

3. Tap the city name in the list, and then tap Add.

To remove a city, touch and hold it, and tap Delete.

Use the search bar.

Tap the location icon.

1. From Clock, tap World clock.

2. Tap More options > Time zone converter.

3. Tap Menu to choose a different city. (To add a city to the list, tap + Add city.)

4. Swipe the hours, minutes, and period (AM or PM) on the clock to set a time. Local times for the other cities listed are automatically updated.

• To return the clock to the current time, tap Reset.

1. From Clock, tap Stopwatch.

2. Tap Start to begin timing. (To keep track of lap times, tap Lap.)

3. Tap Stop to end timing.

• To continue timing after stopping the clock, tap Resume.

• To reset the Stopwatch to zero, tap Reset.

1. From Clock, tap Timer.

2. Use the keypad and tap Hours, Minutes, and Seconds to set the Timer.

3. Tap Start to begin the Timer.

• To temporarily stop the Timer, tap Pause. To continue, tap Resume.

• To stop and reset the Timer, tap Cancel.

• To save a preset timer, tap + Add preset timer.

From Apps, tap Email.

Tap the attachment icon.

Tap the send icon.

1. From Email, tap Compose new email. (Different email account may have additional steps and options.)

2. Tap the To field to add an email address or tap Add from Contacts to select a recipient from your contacts.

• When adding multiple recipients, separate them with a semicolon (;). More recipients can be added at any time before the message is sent.

• If adding a recipient from your Contacts, tap the contact to place a checkmark, and then tap Done. The contact is displayed in the recipients field.

• Tap Show additional fields to add Cc and Bcc fields.

3. Tap the Subject and Message fields to enter text.

• Tap Attach to add files, images, audio, and more to your email.

• Tap More options for additional email options.

4. Review your message and tap Send.

From Email:

• Tap a message to read and reply or forward it.

• Tap Q to search for key words in your email inbox.

• Tap More options > Edit for additional message options.

• Tap More options > Sort to customize how messages display.

From Email, tap Menu for the following options:

• [Account name]: View email for only one email account.

• All accounts: View all email in a combined inbox.

From Email, tap Menu > Settings.

• Under General, tap an option, and then follow the prompts.

• Tap an account to configure specific settings for only that account.

1. From Email, tap Menu > Settings.

2. Tap the account you want to remove.

3. Tap Remove, and confirm when prompted.

From Apps, tap Gallery.

1. From Gallery, tap Pictures.

2. Tap a picture to view it. Swipe left or right to view other pictures or videos.

• To mark the picture as a favorite, tap Favorite. The picture is added to Favorites under the Albums tab.

• To access the following features, tap More options:

– Details: View and edit information about the picture.

– Set as wallpaper: Set the picture as wallpaper.

– Set as Always On Display image: Set the picture as the background image for the Always On Display.

– Share by Live message: Use Live message to draw an animation on a picture and share it.

– Move to Secure Folder: Move the picture to a Secure Folder.

– Print: Send the picture to a connected printer.

1. From Gallery, tap Pictures.

2. Tap a picture to view it, and then tap Edit for the following options:

• Transform: Rotate, flip, crop, or make other changes to the overall appearance of the picture.

• Effects: Add color effects.

• Stickers: Overlay illustrated or animated stickers.

• T Text: Add text to the picture.

• Draw: Add handwritten text or hand drawn content.

• Brightness: Adjust brightness image controls.

1. From Gallery, tap Pictures.

2. Tap a video to view it. Swipe left or right to view other pictures or videos.

• To mark the video as a favorite, tap Favorite. The video is added to Favorites under the Albums tab.

• To access the following features, tap More options:

– Details: View and edit information about the video.

– Set as wallpaper: Set the video as wallpaper on the Lock screen.

– Move to Secure Folder: Add this video to your Secure Folder.

3. Tap Play video to play the video.

1. From Settings, tap Advanced features > Video enhancer.

2. Tap to enable this feature.

1. From Gallery, tap Pictures.

2. Tap a video to view it.

3. Tap Edit to use the following tools:

• Rotate: Rotate the video clockwise.

• Trim: Cut segments of the video.

• Effects: Add visual effects to the video.

• Beauty face: Enhance faces.

• Sticker: Overlay illustrated or animated stickers.

• Audio: Adjust the volume levels and add background music to the video.

4. Tap Save, and then confirm when prompted.

1. From Gallery, tap Pictures.

2. Tap More options > Share, and then tap pictures and videos to select them.

3. Tap Share, and then choose an app or connection to use for sharing your selection. Follow the prompts.

1. From Gallery, tap More options > Edit.

2. Tap pictures and videos to select them, or tap the All checkbox at the top of the screen to select all pictures and videos.

3. Tap Delete, and confirm when prompted.

From any screen, press and hold the Power and Volume down keys.

1. From Settings, tap Advanced features > Smart capture.

2. Tap to enable this feature.

1. From Settings, tap Advanced features > Motions and gestures > Palm swipe to capture.

2. Tap to enable this feature.

Capture an image of the screen by swiping the edge of your hand across it, from side to side, keeping in contact with the screen.

From Apps, tap Internet.

Tap the star icon.

Tap the reload icon.

Use the navigation buttons.

Tap the tabs/bookmarks icon.

From Internet, tap Tabs > New tab.

To close a tab, tap Tabs > X Close tab.

1. From Internet, tap Menu > Bookmarks.

2. Tap a bookmark entry.

From Internet, tap Menu > Add page to > Saved pages.

To view saved web pages, tap Menu > Saved pages.

From Internet, tap Menu > History.

To clear your browsing history, tap More options > Clear history.

From Internet, tap Menu > Share, and follow the prompts.

1. From Internet, tap Tabs > Turn on Secret mode.

2. Tap Set password to protect your Secret mode data with a password.

From Internet, tap Tabs > Turn off Secret mode.

From Internet, tap Menu > Settings.

From Apps, tap Messages > Compose.

Tap the attachment icon.

Tap the send icon.

1. From Messages, tap Search.

2. Enter keywords in the Search field, and then tap Search on the keyboard.

1. From Messages, tap More options > Edit.

2. Tap each conversation you want to delete.

3. Tap Delete, and confirm when prompted.

1. From Messages, tap More options > Settings.

2. Tap Emergency alert settings to customize notifications for emergency alerts.

1. From Settings, tap Advanced features > Send SOS messages, and then tap to enable this feature.

2. Tap Send messages to > Add and add recipients by creating new contacts or selecting from Contacts.

• To include a picture from your front and rear camera, tap Attach pictures.

• To include a five-second audio recording in your SOS message, tap Attach audio recording.

Press the Power key quickly three times to send an SOS message.

From Messages, tap More options > Settings.

From Apps, tap Samsung folder > My Files.

Tap the search icon.

From My Files, the following options are available:

• Search: Search for a file or folder.

• More options:

– Clear recent files: Remove the list of recently accessed files. This option is only available after a file has been opened through My Files.

– Storage analysis: See what’s taking up space in your storage.

– Settings: View settings for the app.

From a Home screen, tap Phone.

Press and hold the 1 key or the designated voicemail key.

Enter the number on the keypad and tap the call button.

From Phone, enter a number on the keypad and tap Call. (Tap Keypad if the keypad is not displayed.)

1. From Settings, tap Advanced features > Motions and gestures > Swipe to call or send messages.

2. Tap to enable this feature.

Swipe a contact or number to the right to make a call.

1. From Phone, tap Recents to display a list of recent calls.

2. Tap a contact, and then tap Call.

From Contacts, swipe your finger across a contact to the right to call the contact.

On the incoming call screen, drag Answer to the right to answer the call.

On the incoming call pop-up screen, tap Answer to answer the call.

From Settings, tap Accessibility > Hearing enhancements and tap an option:

• Sound detectors: Receive alerts when the device detects a baby crying or a doorbell.

• Mute all sounds: Turn off all notifications and audio for privacy.

• Hearing aid support: Improve the sound quality of hearing aids.

• Left/right sound balance: Use the slider to adjust the left and right balance when listening to audio in stereo.

• Mono audio: Switch audio from stereo to mono when using one earphone.

From Settings, tap Accessibility > Hearing enhancements and tap an option:

• Samsung subtitles (CC): Use Samsung subtitles with multimedia files when available.

• Google subtitles (CC): Use Google subtitles with multimedia files when available.

• Speech-to-text: Use the microphone to record speech and convert it to text.

From Settings, tap Accessibility > Interaction and dexterity and tap an option:

• Universal switch: Control your device with your customized switches.

• Assistant menu: Improve device accessibility for users with reduced dexterity.

• Click after pointer stops: Automatically click on an item after the pointer stops over it.

From Settings, tap Accessibility > Interaction and dexterity and tap an option for Answering and ending calls:

– Read caller names aloud: Hear callers’ names read aloud when using Bluetooth or headsets (not included).

– Press Volume up to answer: Use the Volume keys to answer calls.

– Automatic answering: Answer calls after a set duration when using Bluetooth or headsets (not included).

– Press Power key to end: End calls by pressing the Power key.

You can also customize Interaction control for areas of screen interactions, hardkeys, and the keyboard.

From Settings, tap Accessibility > Interaction and dexterity and tap an option:

• Touch and hold delay: Select a time interval for this action.

• Tap duration: Set how long an interaction must be held to be recognized as a tap.

• Ignore repeated touches: Set a time duration in which to ignore repeated touches.

From Settings, tap Accessibility > Advanced settings and tap an option:

• Power and Volume up keys: Configure selected Accessibility settings to open by quickly pressing the Power and Volume up keys at the same time.

• Volume up and down keys: Configure selected services to turn on when you press and hold the Volume up and Volume down keys for three seconds.

From Settings, tap Accessibility > Advanced settings and tap an option:

• Flash notification: Flash either the camera light or the screen when you receive notifications or when alarms sound.

• Notification reminders: Set periodic reminders for any unread notifications.

• Voice Label: Write voice recordings to NFC tags (not included) to provide you with information about objects or locations as you near them.

From Settings, tap Accessibility > Installed services. Additional accessibility services are listed and configured here after they are installed.

From Settings, tap Help.

From Settings, tap Advanced features > Game Launcher.

1. From Settings, tap Advanced features > Dual messenger.

2. Tap next to supported apps to enable the feature for each app.

1. From Settings, tap About phone, and then view your phone number, model number, serial number, and IMEI information.

2. Tap additional items to view more information about your device.

On the incoming call screen, drag Decline to the left to reject the call and send it to your voicemail.

TIP: On the incoming pop-up screen, tap Decline to reject the call and send it to your voicemail.

On the incoming call screen, drag Send message upward and select a message.

TIP: On the incoming call pop-up screen, tap Send message and select a message.

Tap End when you are ready to end your call.

Press the Volume keys to increase or decrease the volume.

Tap Speaker to hear the caller using the speaker or tap Bluetooth to hear the caller using a Bluetooth headset.

Drag the Status bar down to display the Notification panel and tap the call.

Drag the Status bar down to display the Notification panel, and then tap End call.

1. From Phone, tap Places.

2. Tap a location for contact information and directions.

From Phone, tap Recents. A list of recent calls is displayed. If the caller is in your Contacts list, the caller’s name is displayed.

1. From Phone, tap Recents.

2. Tap the call that contains the information that you want to save to your Contacts list, and tap Add to contacts.

3. Tap Create contact or Update existing.

1. From Phone, tap Recents.

2. Touch and hold the call you want to delete from the Call log.

3. Tap Delete.

1. From Phone, tap Recents.

2. Tap the caller you want to add to the Block list.

3. Tap Details > Block, and confirm when prompted.

From Phone, tap More options > Settings > Block numbers.

1. From Phone, tap Keypad > More options > Speed dial numbers. The Speed dial numbers screen displays the reserved speed dial numbers.

2. Tap an unassigned number.

• Tap Menu to select a different Speed dial number than the next one in sequence.

• Number 1 is reserved for Voicemail.

3. Type in a name or number, or tap Add from Contacts to assign a contact to the number.

• The selected contact is displayed in the Speed dial number box.

From Phone, touch and hold the Speed dial number.

• If the Speed dial number is more than one digit long, enter the first digits, and then hold the last digit.

1. From Phone, tap More options > Speed dial numbers.

2. Tap Remove by the contact you want to remove from Speed dial.

1. From Phone, touch and hold the 1 key.

2. Follow the voice prompts from the voicemail center.

1. From Phone, enter the emergency telephone number (911 in North America) and tap Call.

2. Complete your call. During this type of call, you have access to most in-call features.

1. Drag Phone upward to open the call screen.

2. Tap Emergency call to display the Emergency dialer.

3. Enter the emergency telephone number (911 in North America) and tap Call.

4. Complete your call. During this type of call, you have access to most in-call features.

If your service plan supports this feature, you can make another call while a call is in progress.

1. From the active call, tap Add call to dial the second call.

2. Dial the new number and tap Call. When the call is answered:

• Tap the On hold number to switch between the two calls.

• Tap Merge to hear both callers at once (multi-conferencing).

From Phone, tap More options > Settings.

A teletypewriter (TTY) is a telecommunications device that allows people who are deaf, hard of hearing, or who have speech or language disabilities to communicate by telephone.

1. From Phone, tap More options > Settings.

2. Tap Other call settings > TTY mode.

3. Tap TTY Off, TTY Full, TTY HCO, or TTY VCO.

• Drag down the Status bar, and then tap Settings.

• Or, from Apps, tap Settings.

1. From Settings, tap Search, and enter keywords.

2. Tap an entry to go to that setting.

1. From Settings, tap Connections > Wi-Fi, and then tap to turn on Wi-Fi and scan for available networks.

2. Tap a network, and enter a password if required.

Ask the Wi-Fi network administrator for the name and password before you begin.

1. From Settings, tap Connections > Wi-Fi, and then tap to turn on Wi-Fi.

2. Tap Add network at the bottom of the list.

3. Enter information about the Wi-Fi network:

• Network name: Type the exact name of the network.

• Security: Select a security option from the list, and enter the password if required.

• Auto reconnect: Choose this option if you want to automatically reconnect to this network whenever you are in range.

• Advanced: Add any advanced options, such as IP and Proxy settings.

4. Tap Save.

1. From Settings, tap Connections > Wi-Fi, and then tap to turn on Wi-Fi.

2. Tap Advanced. Options include:

• Switch to mobile data: When enabled, your device will switch to mobile data whenever the Wi-Fi connection is unstable. When the Wi-Fi signal is strong, it switches back to Wi-Fi.

• Turn on Wi-Fi automatically: Turn on Wi-Fi in frequently-used locations.

• Detect suspicious networks: Get notified when suspicious activity is detected on the current Wi-Fi network.

• Secure Wi-Fi: Get extra privacy protection while using unsecured Wi-Fi networks.

• Network notification: Receive notifications when open networks in range are detected.

• Manage networks: View saved Wi-Fi networks and configure whether to auto reconnect to or forget individual networks.

3. Tap View more to see additional network settings. Options include:

• Wi-Fi control history: View apps that have recently turned your Wi-Fi on or off.

• Hotspot 2.0: Connect automatically to Wi-Fi networks that support Hotspot 2.0.

• Install network certificates: Install authentication certificates.

• MAC address: View your device’s MAC address, which is required when connecting to some secured networks (not configurable).

• IP address: View your device’s IP address (not configurable).

1. From Settings, tap Connections > Wi-Fi, and then tap to turn on Wi-Fi.

2. Tap Wi-Fi Direct.

3. Tap a device, and then follow the prompts to connect.

TIP: When sharing a file, tap Wi-Fi Direct to use this feature.

From Settings, tap Connections > Wi-Fi > Wi-Fi Direct, and then tap a device to disconnect it.

1. From Settings, tap Connections > Bluetooth, and then tap to turn on Bluetooth.

2. Tap a device, and follow the prompts to connect.

TIP: When sharing a file, tap Bluetooth to use this feature.

1. From Settings, tap Connections > Bluetooth, and then tap to turn on Bluetooth.

2. Tap Settings next to the device name, and then tap Rename.

3. Enter a new name, and tap Rename.

TIP: You will need to pair with the device again in order to connect to it.

1. From Settings, tap Connections > Bluetooth, and then tap to turn on Bluetooth.

2. Tap Settings next to the device, and then tap Unpair.

1. From Settings, tap Connections > Bluetooth.

2. Tap Advanced for the following options:

• Dual audio: Play audio from your device to two connected Bluetooth devices.

• Media volume sync: Sync the volume level set on the connected Bluetooth devices to your device.

• Ringtone sync: Use the ringtone set on your phone when you receive calls through a connected Bluetooth device.

• Bluetooth control history: View apps that have used Bluetooth recently.

From Settings, tap Connections > Phone visibility, and then tap to make your device visible.

From Settings, tap Connections > NFC and payment, and then tap to turn on this feature.

TIP: The device that you are transferring to needs to support NFC, and it needs to be within four centimeters of your device.

1. From Settings, tap Connections > NFC and payment, and then tap to turn on NFC.

2. Tap Android Beam, and then tap to turn on this feature.

TIP: When sharing a file, tap Android Beam to use this feature.

1. From Settings, tap Connections > NFC and payment, and then tap to turn on NFC.

2. Tap Tap and pay > Payment to see the default payment app.

• To use another payment app when it is open instead of the default app, tap Tap and pay with open apps.

• To set another payment app as the default, tap Others, and then tap the app you prefer.

TIP: NFC technology is used with Samsung Pay. Turn on this feature to see how easy and secure it is to use your device to make payments.

1. From Settings, tap Connections > Airplane mode.

2. Tap to enable this feature.

From Settings, tap Connections > Data usage.

1. From Settings, tap Connections > Data usage.

2. Tap Wi-Fi data usage to view data usage over Wi-Fi connections over a period of time. You can view total usage as well as usage by app.

1. From Settings, tap Connections > Mobile hotspot and tethering > Mobile hotspot.

2. Tap to turn on Mobile hotspot.

3. On the devices you want to connect, activate Wi-Fi and select your device’s Mobile hotspot. Enter the Mobile hotspot password to connect.

TIP: Check with your carrier about service fees.

1. From Settings, tap Connections > Mobile hotspot and tethering > Mobile hotspot.

2. Tap the password, enter a new password, and then tap Save.

1. From Settings, tap Connections > Mobile hotspot and tethering > Mobile hotspot.

2. Tap More options > Allowed devices, and then tap Add to enter the other device’s Device name and MAC address.

3. Tap Add to add the device.

• To restrict connections to your Allowed devices list, tap Allowed devices only.

TIP: You need the device name and MAC address of devices that you want to add to the Allowed devices list.

1. From Settings, tap Connections > Mobile hotspot and tethering > Mobile hotspot.

2. Tap More options > Configure mobile hotspot for the following settings:

• Network name: View and change the name of your Mobile hotspot.

• Hide my device: Prevent your Mobile hotspot from being discoverable by other devices.

• Security: Choose the security level for your Mobile hotspot.

• Password: If you choose a security level that uses a password, you can view or change it.

• Power saving mode: Reduce battery usage by analyzing hotspot traffic.

• Show advanced options: Configure additional Mobile hotspot settings.

TIP: This feature can help you manage your data usage.

1. From Settings, tap Connections > Mobile hotspot and tethering > Mobile hotspot.

2. Tap More options > Timeout settings, and then select an interval.

1. From Settings, tap Connections > Mobile hotspot and tethering > Mobile hotspot.

2. Tap Wi-Fi sharing to turn on this feature.

TIP: Use this feature to share your Wi-Fi network without giving out your Wi-Fi password.

1. From Settings, tap Connections > Mobile hotspot and tethering.

2. Tap an option:

• Tap Bluetooth tethering to share your device’s Internet connection using Bluetooth.

• Connect the computer to the device using a USB cable, and then tap USB tethering.

NOTE: The other device does not need Wi-Fi to use this sharing method.

1. From Settings, tap Connections > More connection settings > Nearby device scanning.

2. Tap to turn on the feature.

1. From Settings, tap Connections > More connection settings > Printing.

2. Tap Download plugin and follow the prompts to add a print service.

3. Tap the print service, and then tap More options > Add printer.

TIP: Make sure the app you want to print from supports printing.

1. Connect your device to your car’s system using the USB cable.

2. From Settings, tap Connections > More connection settings > MirrorLink.

3. Tap Connect to car via USB, and follow the prompts.

From Settings, tap Connections > More connection settings > Download booster, and tap to enable.

NOTE: Download booster uses mobile data services.

You will need the connection information from your VPN administrator.

1. From Settings, tap Connections > More connection settings > VPN.

2. Tap More options > Add VPN profile.

3. Enter the VPN network information provided by your network administrator, and tap Save.

TIP: A secured screen lock is required to set up a VPN.

1. From Settings, tap Connections > More connection settings > VPN.

2. Tap Settings next to a VPN.

3. Edit the VPN and tap Save, or tap Delete to remove the VPN.

1. From Settings, tap Connections > More connection settings > VPN.

2. Tap a VPN, enter your log in information, and tap Connect.

• To disconnect, tap the VPN, and then tap Disconnect.

1. From Settings, tap Connections > More connection settings > Private DNS.

2. Tap one of the available options to configure a private DNS connection.

3. Tap Save.

1. Connect an Ethernet cable to your device.

2. From Settings, tap Connections > More connection settings > Ethernet, and follow the prompts.

TIP: You need an adapter (not included) to connect an Ethernet cable to your device.

From Settings, tap Sounds and vibration > Sound mode, and then choose a mode:

• Sound: Use the sounds, vibrations, and volume levels you have chosen in Sound settings for notifications and alerts.

• Vibrate: Use vibration only for notifications and alerts.

• Mute: Set your device to make no sounds.

Temporary mute: Set a time limit for muting the device.

From Settings, tap Advanced features > Motions and gestures > Easy mute, and tap to enable. You can mute sounds by covering the screen or turning the device over.

1. From Settings, tap Sounds and vibration.

2. Tap options to customize:

• Vibrate while ringing: Set your device to vibrate in addition to ringing when you receive a call.

• Vibration pattern: Choose from preset vibration patterns.

• Vibration intensity: Set vibration intensity levels for calls, notifications, and feedback by dragging the sliders.

From Settings, tap Sounds and vibration > Volume, and drag the sliders.

TIP: You can also use the Volume key to adjust the volume. Slide the volume controls to customize all volume options.

1. From Settings, tap Sounds and vibration.

2. Tap Use Volume keys for media to enable this feature.

1. From Settings, tap Sounds and vibration > Volume.

2. Tap More options > Media volume limiter.

3. Tap to enable this feature.

• To set the maximum output volume, drag the Custom volume limit slider.

• To require a PIN to make changes to the volume setting, tap Set volume limit PIN.

1. From Settings, tap Sounds and vibration > Ringtone.

2. Tap a ringtone to hear a preview and select it, or tap Add to use an audio file as a ringtone.

1. From Settings, tap Sounds and vibration > Notification sounds.

2. Tap a sound to hear a preview and select it.

TIP: You can also customize notifications sounds to be unique for each app using the App settings menu.

From Settings, tap Sounds and vibration > System sounds and vibration for the following options:

• Touch sound: Play tones when you touch or tap the screen to make selections.

• Screen lock sound: Play a sound when you unlock the screen.

• Charging sound: Play a sound when a charger is connected.

• Dialing keypad tone: Play a tone when dialing numbers on the Phone keypad.

• Keyboard sound: Play a sound when typing with the Samsung keyboard.

• Keyboard vibration: Vibrate when typing with the Samsung keyboard.

• Touch vibration: Vibrate when you tap navigation buttons or touch and hold items on the screen.

From Settings, tap Sounds and vibration > Advanced sound settings > Sound quality and effects for the following options:

• Dolby Atmos: Experience breakthrough audio that flows above and around you.

• Dolby Atmos for gaming: Apply Dolby Atmos optimized for gaming.

1. From Settings, tap Sounds and vibration > Advanced sound settings > Sound quality and effects.

2. Tap Equalizer to choose a music genre.

From Settings, tap Sounds and vibration > Advanced sound settings > Sound quality and effects, and tap an option to turn it on:

• UHQ upscaler: Sharpens audio resolution for crisp sound. (This feature is only available with a headset connected).

1. From Settings, tap Sounds and vibration > Advanced sound settings > Sound quality and effects > Adapt sound.

2. Tap the sound profile that fits you best, and tap Settings to customize.

TIP: Tap Add personalized sound profile to take a hearing test and let your device identify the best sound for you.

1. From Settings, tap Sounds and vibration > Advanced sound settings > Separate app sound.

2. Tap to enable Separate app sound, and then set the following options:

• App: Choose an app to play its sound on a separate audio device.

• Audio device: Choose the audio device that you want the app’s sound to be played on.

TIP: You need to connect to a Bluetooth device to make this option available in the Audio device menu.

From Settings, tap Notifications. Options include:

• App icon badges: Identify which apps have active notifications with badges that appear on their icons. Tap to choose whether or not badges indicate the number of unread notifications.

• Do not disturb: Allow notifications from this app even when Do not disturb is turned on.

• Status bar: Modify how many notifications appear on the Status bar.

• To block notifications from an app, tap next to the app. Tap See all to open the complete list of apps.

1. From Settings, tap Notifications > See all.

2. Tap an app for the following options:

• Show notifications: Receive notifications from this app.

• App icon badges: Show a badge on the icon when there are notifications.

• Categories: Configure notification options that are specific to this app.

From Settings, tap Advanced features > Motions and gestures > Smart alert, and tap to enable.

From Settings, tap Advanced features > Smart pop-up view, and tap to enable.

1. From Settings, tap Display.

2. Customize options under Brightness:

• Drag the Brightness slider to set a custom brightness level.

• Tap Adaptive brightness to automatically adjust the screen brightness based on the lighting conditions.

Reset usage patterns: Clear your brightness adjustment history. Your device begins learning your preferences again after the reset.

From Settings, tap Display > Blue light filter, and then choose one of the following options:

• Drag the Opacity slider to set the opacity of the filter.

• Tap Turn on now to enable this feature.

• Tap Turn on as scheduled to set a schedule for when Blue light filter should be enabled. You can choose Sunset to sunrise or Custom schedule.

From Settings, tap Display > Night mode for the following options:

• Turn on now: Put your device in Night mode.

• Turn on as scheduled: Configure Night mode for either Sunset to sunrise or Custom schedule.

1. From Settings, tap Display > Screen mode.

2. Tap an option to set a different screen mode.

From Settings, tap Display > Font size and style for the following options:

• Drag the Font size slider to adjust the size of text.

• Tap Font style to choose a different font.

Tap a font to select it, or tap Download fonts to add fonts from Galaxy Store.

• Tap Bold font to make all fonts appear with bold weight.

1. From Settings, tap Display > Screen zoom.

2. Drag the Screen zoom slider to adjust the zoom level.

1. From Settings, tap Display > Screen resolution.

2. Tap your preferred resolution, and then tap Apply.

NOTE: Some apps may not support higher or lower screen resolution settings and may close when you change the resolution.

From Settings, tap Display > Full screen apps and tap apps to enable this feature.

From Settings, tap Display > Screen timeout, and tap a time limit to set it.

From Settings, tap Display > Accidental touch protection to enable or disable the feature.

From Settings, tap Display > Touch sensitivity to enable the feature.

1. From Settings, tap Display > Screen saver.

2. Tap to enable the feature and configure the following options:

• Colors: Tap the selector to display a changing screen of colors.

• Photo table: Display pictures in a photo table.

• Photo frame: Display pictures in a photo frame.

• Photos: Display pictures from your Google Photos account.

3. Tap Preview for a demonstration of the selected Screen saver.

TIP: Tap Settings next to a feature for additional options.

From Settings, tap Advanced features > Reduce animations, and tap to enable the feature.

From Settings, tap Advanced features > Motions and gestures > Lift to wake, and tap to enable.

From Settings, tap Advanced features > Motions and gestures > Double tap to wake up, and tap to enable.

From Settings, tap Advanced features > Motions and gestures > Smart stay, and tap to enable the feature.

1. From Settings, tap Advanced features > Motions and gestures > One-handed mode.

2. Tap to enable the following:

• Gesture: Swipe up diagonally from either bottom corner to reduce the display size.

• Button: Tap Home three times in quick succession to reduce the display size.

The quick optimization feature improves device performance by:

• Identifying apps that use excessive battery power and clearing unneeded items from memory.

• Deleting unnecessary files and closing apps running in the background.

• Scanning for malware.

To use the quick optimization feature: From Settings, tap Device care > Optimize now.

From Settings, tap Device care > Battery for options:

• Battery usage: View power usage by app and service.

• Power mode: Select a power mode to extend battery life.

• Usage by apps: View power usage by app today or over the past week.

• More options > Settings: Configure advanced battery settings and notifications.

From Settings, tap Device care > Storage > Clean now.

1. From Settings, tap Device care > Storage.

2. Tap More options > Storage settings.

3. Under Portable storage, tap your SD card, and then tap Mount.

To prevent damage to information stored on the memory card, unmount the card before removing it from the device.

1. From Settings, tap Device care > Storage.

2. Tap More options > Storage settings.

3. Under Portable storage, tap your SD card, and then tap Unmount.

4. Remove your memory card from the device.

When formatting an SD card, you should back up your music and photo files that are stored on the card because formatting the SD card deletes ALL stored files.

1. From Settings, tap Device care > Storage.

2. Tap More options > Storage settings.

3. Under Portable storage, tap your SD card, tap Format, and then follow the prompts.

1. From Settings, tap Device care > Memory.

• The used and available memory are shown.

2. To free up as much memory as possible, tap Clean now and follow the prompts.

• The selected apps and services in the list will be closed.

From Settings, tap Device care > Device security for the following options:

• Tap Scan phone to scan for security threats.

1. From Settings, tap General management > Language and input > Language.

2. Tap Add language, and select a language from the list.

3. Tap Set as default to change the device language.

• To switch to another language on the list, drag Move next to the desired language to the top of the list, and then tap Apply.

1. From Settings, tap General management > Language and input.

2. Tap Default keyboard, and select a keyboard. Additional keyboards can be downloaded from the Google Play store.

1. From Settings, tap General management > Language and input.

2. Tap On-screen keyboard > Google voice typing to customize settings.

1. From Settings, tap General management > Language and input.

2. Tap On-screen keyboard > Manage keyboards.

3. Tap each keyboard to enable or disable.

1. From Settings, tap General management > Language and input.

2. Tap Physical keyboard, and then choose an option:

• Show on-screen keyboard: Show the on-screen keyboard while a physical keyboard is also being used.

• Keyboard shortcuts: Show explanations of the keyboard shortcuts on the screen.

1. From Settings, tap General management > Language and input.

2. Tap Show keyboard button to enable this feature.

1. From Settings, tap General Management > Language and input.

2. Tap Autofill service and select your preferred service.

From Settings, tap General management > Language and input > Text-to-speech for options:

• Preferred engine: Choose either the Samsung or Google Text-to-speech engine. Tap Settings for options.

• Language: Set the default speech language.

• Speech rate: Set the speed at which the text is spoken.

• Pitch: Set the pitch of the speech.

• Play: Tap to play a short demonstration of speech synthesis.

• Reset: Reset the speech rate and pitch.

1. From Settings, tap General management > Language and input.

2. Under Pointer speed, drag the slider to the right to go faster or to the left to go slower.

1. From Settings, tap General management > Language and input.

2. Tap Primary mouse button, and choose either Left or Right.

By default, your device receives date and time information from the wireless network. Outside of network coverage, you can set the date and time manually.

From Settings, tap General management > Date and time. The following options are available:

• Automatic date and time: Receive date and time updates from your wireless network. When Automatic date and time is disabled, the following options are available:

Select time zone: Choose a new time zone.

Set date: Enter the current date.

Set time: Enter the current time.

• Use 24-hour format: Set the format for displaying time.

From Settings, tap Software update for the following options:

• Download and install: Check for software updates and install if any are available.

• Auto download over Wi-Fi: Automatically download software updates when the device is connected to a Wi-Fi network.

• Last update: View information about the installation of the current software.

This resets everything except the security, language, and account settings. Personal data is not affected.

1. From Settings, tap General management > Reset > Reset settings.

2. Tap Reset settings, and confirm when prompted.

1. From Settings, tap General management > Reset > Reset network settings.

2. Tap Reset settings, and confirm when prompted.

Accessibility settings in downloaded apps and your personal data are not affected.

1. From Settings, tap General management > Reset > Reset accessibility settings.

2. Tap Reset settings, and confirm when prompted.

Any unsaved data will be lost when the device restarts.

1. From Settings, tap General management > Reset > Auto restart.

2. Tap to activate Auto restart, and then set the following parameters:

• Day: Select the day of the week to automatically restart your device.

• Time: Set the time of day to restart your device.

This action permanently erases ALL data from the device, including Google or other account settings, system and application data and settings, downloaded applications, as well as your music, photos, videos, and other files. Any data stored on an external SD card is not affected.

NOTE: When you sign in to a Google Account on your device, Factory Reset Protection is activated. This protects your device in the event it is lost or stolen.

If you reset your device to factory default settings with the Factory Reset Protection (FRP) feature activated, you must enter the user name and password for a registered Google Account to regain access to the device. You will not be able to access the device without the correct credentials.

NOTE: If you reset your Google Account password, it can take 24 hours for the password reset to sync with all devices registered to the account.

1. Verify that the information you want to keep has transferred to your storage area.

2. Log in to your Google Account and confirm your user name and password.

1. From Settings, tap General management > Reset > Factory data reset.

2. Tap Reset and follow the prompts to perform the reset.

3. When the device restarts, follow the prompts to set up your device.

Adding a Google Account to your device automatically activates the FRP security feature.

To disable FRP, remove all Google Accounts from the device.

1. From Settings, tap Accounts and backup > Accounts > [Google Account].

2. Tap Remove account.

1. From Settings, tap Lock screen > Screen lock type and tap a secure screen lock (Pattern, PIN, or Password).

2. Tap to enable showing notifications on the lock screen. The following options are available:

• View style: Display notification details or hide them and show only an icon.

• Hide content: Do not show notifications in the notification panel.

• Show on Always On Display: Display notifications on the Always on Display screen.

3. Tap Done when finished.

4. Configure the following screen lock options:

• Smart Lock: Unlock your device automatically when trusted locations or other devices have been detected. A secure screen lock is required for this feature.

• Secure lock settings: Customize your secure lock settings. A secure screen lock is required for this feature.

• Always On Display: Enable the Always On Display screen.

From Settings, tap Lock screen for the following options:

• Clock style: Set the type and color of the clock on the Lock screen and Always On Display screen.

• Roaming clock: Change to digital clocks showing both local and home time zones when roaming.

• FaceWidgets: Enable widgets on the Lock screen and Always On Display screen to get quick access to useful information.

• Contact information: Show your contact information, such as your phone number or email address.

• Notifications: Select which notifications to display on the Lock screen and Always On Display screen.

• App shortcuts: Select which apps to open from the Lock screen.

• About Lock screen: Update the Lock screen’s software.

1. From Settings, tap Biometrics and security > Google Play Protect.

2. Tap options to customize security features.

TIP: A Samsung account is required, and Google location service must be turned on in order to use Find My Mobile.

1. From Settings, tap Biometrics and security > Find My Mobile.

2. Tap Add Samsung account and follow the prompts. The following options are available:

• Remote controls: Turn on to access your device remotely.

• Google location service: Turn on to enable Google location service to find your device.

• Remote unlock: Allow Samsung to store your PIN, pattern, or password, allowing you to unlock and control your device remotely.

• Send last location: Allow your device to send its last location to the Find My Mobile server when the remaining battery charge falls below a certain level.

From Settings, tap Biometrics and security > Security update to see the latest security update installed and check if a newer update is available.

You must sign in to your Samsung account to use Samsung Pass.

1. From Settings, tap Biometrics and security > Samsung Pass.

2. Sign in to your Samsung account and add your biometric data.

1. From Settings, tap Biometrics and security > Install unknown apps.

2. Tap an app or source, and then tap Allow from this source.

TIP: Installing unknown third-party apps could make your device and personal data more vulnerable to security risks.

From Settings, tap Biometrics and security > Secure Folder and follow the prompts to secure content on your device.

TIP: You must sign in to your Samsung account, and use secured lock on your device to set up and use Secure Folder.

This only allows the SD card information to be accessed from your device with a password.

1. From Settings, tap Biometrics and security > Encrypt SD card.

2. Tap Encrypt SD card and follow the prompts to encrypt all data on your memory card.

NOTE: Performing a Factory data reset on your device prevents it from accessing an encrypted SD card. Before initiating a Factory data reset, make sure to decrypt the installed SD card first.

1. From Settings, tap Biometrics and security > Decrypt SD card.

2. Tap Decrypt SD card and follow the prompts to decrypt all data on your memory card.

From Settings, tap Biometrics and security > Other security settings > Make passwords visible to turn on the feature.

From Settings, tap Biometrics and security > Other security settings, and then tap Security policy updates to check for security updates.

1. From Settings, tap Biometrics and security > Other security settings > Device admin apps.

2. Tap an option to turn it on as a device administrator.

From Settings, tap Biometrics and security > Other security settings for the following options:

• Storage type: Select a storage location for credential contents.

• View security certificates: Display certificates in your device’s ROM and other certificates you have installed.

• User certificates: View user certificates that identify your device.

• Install from device storage: Install a new certificate from storage.

• Clear credentials: Erase credential contents from the device and reset the password.

From Settings, tap Biometrics and security > Other security settings > Strong protection, and then tap to enable this feature.

From Settings, tap Biometrics and security > Other security settings. Options include:

• Trust agents: Allow trusted devices to perform selected actions when connected. This option is only displayed when a lock screen is turned on.

• Pin windows: Pin an app on your device screen, which prevents access to other features of your device.

1. From Settings, tap Biometrics and security > Location.

2. Tap to turn on Location services.

3. Tap Improve accuracy to use other connections for determining your location:

• Wi-Fi scanning: Allow apps and services to scan for Wi-Fi networks automatically, even when Wi-Fi is turned off.

• Bluetooth scanning: Allow apps to scan for and connect to nearby devices automatically through Bluetooth, even when Bluetooth is turned off.

TIP: Some apps require location services be turned on for full functionality.

1. From Settings, tap Biometrics and security > Location.

2. Tap to turn on Location services.

3. Tap an entry under Recent location requests to view the app’s settings.

1. From Settings, tap Biometrics and security > Location.

2. Tap an entry under Location services to see how your location information is used.

1. From Settings, tap Biometrics and security > App permissions.

2. Tap a category, and tap next to the apps you want to be notified about.

• Tap an app to select which permissions you want to be notified about.

1. From Settings, tap Biometrics and security > Send diagnostic data.

2. Read and accept the consent information to enable this feature.

From Settings, tap Biometrics and security > Samsung Ads, and then tap the toggle to enable or disable this feature.

• Tap About Samsung Ads and Privacy to learn about Samsung’s privacy policies.

1. From Settings, tap Accounts and backup > Samsung Cloud.

• If a Samsung account has not been added, the screens explain how to create or sign in to your account.

2. Once a Samsung account is configured, you can view and manage items stored in the Samsung Cloud.

1. From Settings, tap Accounts and backup > Accounts > Add account.

2. Tap one of the account types.

3. Follow the prompts to enter your credentials and set up the account.

• Tap Auto sync data to enable automatic updates to your accounts.

1. From Settings, tap Accounts and backup > Accounts > [Account type].

2. Tap an account to configure that account’s sync settings.

3. Tap other available options for the account type.

1. From Settings, tap Accounts and backup > Accounts > [Account type].

2. Tap an account to view the sync settings for that account.

3. Tap individual data items to sync.

4. Tap More options > Sync now to synchronize the account.

1. From Settings, tap Accounts and backup > Accounts > [Account type].

2. Tap the account and then tap Remove account.

From Settings, tap Accounts and backup > Backup and restore for options:

• Back up data: Configure your Samsung account to back up your data.

• Restore data: Use your Samsung account to restore your backup data.

From Settings, tap Accounts and backup > Backup and restore for options:

• Back up my data: Enable back up of application data, Wi-Fi passwords, and other settings to Google servers.

• Backup account: Select a Google Account to be used as your backup account.

• Automatic restore: Enable automatic restoration of settings from Google servers.

From Settings, tap Accounts and backup > Backup and restore > External storage transfer.

From Settings, tap Google, and select an option to customize. (Available options depend on your Google Account.)

From Settings, tap Accessibility > Screen reader and tap an option:

• Voice assistant: Receive spoken feedback when using your device, such as what you touch, select, or activate.

• Tutorial: Learn how to use Voice assistant.

• Settings: Configure Voice assistant to better assist you.

From Settings, tap Accessibility > Visibility enhancements and tap an option:

• High contrast theme: Adjust colors and screen fonts to increase the contrast for easier viewing.

• High contrast fonts: Adjust the color and outline of fonts to increase the contrast with the background.

• High contrast keyboard: Adjust the size of the Samsung keyboard and change its colors to increase the contrast between the keys and the background.

• Show button shapes: Show buttons with shaded backgrounds to make them stand out better against the wallpaper.

• Negative colors: Reverse the display of colors from white text on a black background to black text on a white background.

• Color adjustment: Adjust the color of the screen if you find it difficult to see some colors.

• Color lens: Adjust the screen colors if you have difficulty reading the text.

• Remove animations: Remove certain screen effects if you are sensitive to motion.

From Settings, tap Accessibility > Visibility enhancements and tap an option:

• Magnifier window: Magnify content shown on the screen.

• Magnification: Use exaggerated gestures such as triple-tapping, double pinching, and dragging two fingers across the screen.

• Large mouse/touchpad pointer: Use a large pointer for a connected mouse or touchpad (accessories not included).

• Font size and style: Configure screen fonts.

• Screen zoom: Configure the screen zoom level.