FREE ENGLISH NUWATT NW-BL-2X4-30.40.50W-5CCT (01) PDF DOCUMENT.
FREE ENGLISH NUWATT NW-BL-2X4-30.40.50W-5CCT (01) PDF USER GUIDE.
FREE ENGLISH NUWATT NW-BL-2X4-30.40.50W-5CCT (01) PDF USER MANUAL.
FREE ENGLISH NUWATT NW-BL-2X4-30.40.50W-5CCT (01) PDF OWNER GUIDE.
FREE ENGLISH NUWATT NW-BL-2X4-30.40.50W-5CCT (01) PDF OWNER MANUAL.
FREE ENGLISH NUWATT NW-BL-2X4-30.40.50W-5CCT (01) PDF REFERENCE GUIDE.
FREE ENGLISH NUWATT NW-BL-2X4-30.40.50W-5CCT (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH NUWATT NW-BL-2X4-30.40.50W-5CCT (01) PDF REFERENCE MANUAL.
FREE ENGLISH NUWATT NW-BL-2X4-30.40.50W-5CCT (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH NUWATT NW-BL-2X4-30.40.50W-5CCT (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD NUWATT NW-BL-2X4-30.40.50W-5CCT (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What safety precautions should be followed during installation?
WARNING: To avoid electric shock or component damage, disconnect power before attempting installation or servicing.
WARNING: This product must be installed in accordance with the national electric code (NEC) and all applicable federal, state and local electric codes and safety standards.
WARNING: Please follow the correct installation instructions to install the product.
WARNING: Do not use the product in wet locations.
How do I adjust the wattage and color temperature before installation?
Before installing, select the desired color temperature and wattage using the switches on the back of the luminaire.
What are the wattage settings for the different models?
The wattage is adjusted using a 3-position switch (Left, Middle, Right). The settings are as follows:
| Items | Left Position | Middle Position | Right Position |
|---|---|---|---|
| NW-BL-2X2-20.30.40W-5CCT | 20W | 30W | 40W |
| NW-BL-1X4-20.30.40W-5CCT | 20W | 30W | 40W |
| NW-BL-2X4-30.40.50W-5CCT | 30W | 40W | 50W |
What are the color temperature (CCT) settings?
The CCT is selected using a 5-position switch. The settings from the left position to the right position are:
3000K / 3500K / 4000K / 5000K / 6500K
How do I install the luminaire?
1. Carefully unpack the fixture from its packaging and check contents.
2. Turn off power at circuit breaker.
3. Locate all four earthquake clips on the back of luminaire. Twist each tab away from luminaire. Hook them on the T-Bar.
4. Rest the luminaire on the T-Bar of the ceiling suspension system in the desired location.
How do I perform the wiring for installation?
1. Open the connection box and connect the incoming electrical wires to the set of power wires: black to black (LIVE), white to white (NEUTRAL) and green to green (GROUND).
2. For 0-10V dimming, make sure to connect the same wire color. See wiring diagram for 0-10V dimming.
3. Check the wiring, make sure everything is correct. Recover the connection box. Then turn on power to the luminaire.
What are the standard wiring connections?
Connect the incoming electrical wires to the luminaire wires as follows:
BLACK (LIVE) to BLACK (LIVE)
GREEN (GROUND) to GREEN (GROUND)
WHITE (NEUTRAL) to WHITE (NEUTRAL)
How do I wire for 0-10V dimming?
For 0-10V dimmer wiring, connect the dimmer wires to the luminaire wires as follows:
PURPLE (+) to PURPLE (+)
PINK (-) to PINK (-)
CLICK HERE TO DOWNLOAD NUWATT NW-BL-2X4-30.40.50W-5CCT (01) PDF DOCUMENT