ZELMER ZHB4552 (01) PDF Document

Ensure that all packaging elements have been removed. Before using the ZELMER ZHB4552 for the first time, clean the parts that will come into contact with food, according to the instructions in the cleaning section of the manual.

To use the ZELMER ZHB4552, follow these steps:

1. Unwind the cable fully before plugging it in.

2. Connect the appliance to the mains.

3. Turn on the appliance using the on/off button.

4. Select the desired function and speed.

5. Start mixing the food you wish to process.

To stop the ZELMER ZHB4552, release the pressure on the on/off button, disconnect the appliance from the mains, put the cable back in the cable box, and clean the appliance.

The blender accessory can be used to make sauces, soups, mayonnaise, milk shakes, baby food, etc. Connect the rod to the body of the motor and turn it in the direction indicated by the arrow. Place the food in the recipient and turn on the ZELMER ZHB4552. We suggest cutting the food into cubes no more than 15 mm in size. To remove the rod for cleaning, turn it in the opposite direction indicated by the arrow. Do not use the ZELMER ZHB4552 for more than one minute at a time; if operating in cycles, allow the appliance to rest for at least one minute between cycles.

The whisk accessory can be used for whisking cream, egg whites, etc. Connect the whisk to the whisk mechanism unit of the motor by turning it in the direction indicated by the arrow. Place the food in a large recipient and turn on the ZELMER ZHB4552. To achieve the best results, turn the whisk to the right. To remove the whisk, pull it to release it from the mechanism’s mount.

The chopping accessory can be used to chop vegetables, meat, etc. Place the food into the recipient with the blades inside and close the lid tight. We suggest cutting food into appropriate sizes, such as meat into 2 cm x 2 cm x 6 cm strips or onions into 4 to 6 discs. Place the adaptor into the motor unit by turning it in the direction indicated by the arrow. Attach the motor unit to the cover and turn on the ZELMER ZHB4552. Do not turn on the appliance if the whole unit has not been properly installed. Turn off the appliance when the food reaches the desired texture, remove the unit from the lid, and release the adaptor.

Unplug the power cable of the ZELMER ZHB4552 before cleaning. Do not touch the blade. Use a dry kitchen cloth to clean the product. It is strictly forbidden to rinse the main unit with water or immerse it in water. Do not use metal or nylon brushes, abrasive household products, thinners, or other similar cleaning products to clean the ZELMER ZHB4552, as they can damage its surface structure. Use a soft, dry cloth to remove any dirt from the power cable.

Always disconnect the ZELMER ZHB4552 from the base when it is not in use and before assembling, disassembling, or cleaning it. Turn off the appliance and disconnect it from the mains before changing any accessories or touching parts that move during use. Be careful when handling the sharp blades when emptying the cup and during cleaning. When pouring hot liquid into the mixing recipient, be careful as it may bubble over due to sudden steam. The ZELMER ZHB4552 should not be used by children, and it should be kept out of their reach. If the power cable is damaged, it must be replaced by the manufacturer or authorized professionals to prevent hazards.