VT VT 9000 DECT (01) PDF Document

The VT VT 9000 DECT headset features include wideband audio for exceptional sound quality, volume and mute controls, an intuitive multi-function button for easy call handling, LED and audio indicators, advanced hearing protection with safetone, and a noise-canceling microphone.

The VT VT 9000 DECT base features a headset recharge docking cradle, visual call status indicators, visual wireless connection status indicators, mute indicators, battery indicators, voice-prompted configuration, volume adjustment, and a port for VT Link adapter and remote handset lifter.

1. On the desk phone, unplug the handset cable from the phone body.

2. Connect the handset cable to the port marked on the base.

3. Plug the supplied telephone cable into the port marked on the base.

4. Connect the telephone cable into the handset port on the desk phone.

1. Plug the supplied telephone cable into the port marked on the base.

2. Connect the telephone cable to the headset port on the desk phone.

1. On the desk phone, unplug the handset cable from the phone body.

2. Connect the handset cable to the port marked on the base.

3. Plug the supplied telephone cable into the port marked on the base.

4. Connect the telephone cable into the handset port on the desk phone.

5. Connect the Lifter cable into the port marked AUX on the base.

1. Plug the power adapter into the port marked on the base.

2. Connect the power adapter to the mains power socket.

1. Press the Multiple function button, it will be powered on after the LED lights for 2S. Press the Multiple function button again or dock the headset with the base, then lifting the headset, the headset with paired light will lit up when the headset and base are in the connection.

2. When docked correctly the headset battery will begin charging. Charge for 20 minutes or until the battery indicator on the base is steady green.

1. Put on the headset.

2. Get a dial tone by pressing the headset button on the desk phone, or by lifting the desk phone handset.

3. Locate the clear dial tone switch on the back of the VT VT 9000 DECT base and while listening in the headset for a clear dial tone, rotate the switch from A to G.

4. Determine the best switch position. The dial tone should be strong, clear and undistorted.

5. When the clear dial tone is set, press the headset button on the desk phone, or return the desk phone handset to the receiver.

1. Put on the headset and get a dial tone.

2. Make a test call to a friend or colleague to test your speaking volume.

3. Adjust the microphone volume using the microphone + / – volume buttons if your speaking volume is too loud or too quiet for the listener.

4. Adjust the receiver volume using the receiver + / – volume buttons if your listening volume is too loud or too quiet.

5. When the volumes are set, end the call.

The VT VT 9000 DECT is able to pair with four headsets in total for conferencing, one primary and three secondary headsets.

1. Consistently press the PAGE switch for 5S, the headset with paired light will flash to search the headset, consistently press the headset mute button until the headset status LED flash, then the headset are in the paired status.

2. Repeat the procedure to connect up to four headsets.

3. Press the multiple function button to connect the headsets, then the audio will be shared between the headsets.

4. Dialing to enter the conference call.

5. The headset user can hang up the phone call to end the conference.

Please dispose of the headset according to local regulations and recycle when possible. Do not dispose as household waste. Do not dispose of the headset in a fire as the battery may explode. Batteries may also explode if damaged.