XGIMI AURA 2 (01) PDF Document

Free English XGIMI AURA 2 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.

CLICK HERE TO DOWNLOAD XGIMI AURA 2 (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.

How should I read the Product Instructions for the XGIMI AURA 2?

You should read the Product Instructions carefully before using the XGIMI AURA 2 product for both your safety and interests.

What happens if the content of the Product Instructions for the XGIMI AURA 2 differs from the actual product?

In case of inconformity between the content of the Instructions and the actual product, the actual product shall prevail when using the XGIMI AURA 2.

What is the model number for the XGIMI AURA 2?

The model number for the XGIMI AURA 2 is WM03B.

How do I remove the battery compartment from the XGIMI AURA 2 remote control for first use?

Upon the first use, press the battery compartment release button on the back of the remote control to remove the battery compartment. Then, insert two AAA batteries.

How should I insert batteries into the XGIMI AURA 2 remote control?

When you insert the batteries, make sure that the + and – symbols on the batteries match the + and – symbols inside the battery compartment, and then press the battery compartment back onto the remote control. If you need to replace the batteries later, repeat the directions above.

How do I power on the XGIMI AURA 2?

First, connect the power cord to the XGIMI AURA 2. Next, connect the power cord into a power socket. Finally, press the power button. The device will start, and the auto lens cover will slowly open.

How do I pair the remote control with the XGIMI AURA 2?

Ensure the remote control is within 10 cm of the device, press and simultaneously until the indicator light begins flashing. This means that the remote control has entered pairing mode. When you hear a “Ding”, the connection is successful. If pairing fails, the remote control will exit pairing mode after 30 seconds. Repeat the above steps after exiting.

How do I adjust the focus on the XGIMI AURA 2?

Press the button to trigger auto focus. You can hold the button for manual focus. Manually adjust the focus by pressing the or buttons. After completing the adjustment, you can press any button to exit focusing.

How can I set up Android TV on the XGIMI AURA 2 after pairing the remote control?

After the remote control is paired, follow the onscreen instructions to complete the Android TV setup.

For Android users, they can follow the onscreen instructions to quickly set up Android TV with their smartphones.

For iOS users, follow the instructions below to complete the setup:

Skip the quick setup process.
Connect XGIMI AURA 2 to your network.
Log in with your Google account.

Your XGIMI AURA 2 will be powered by Android TV after the setup process is complete.

How can I enable Auto Keystone Correction on the XGIMI AURA 2?

Enabling method 1: In the system settings, select [Projection Settings] -> [Auto Keystone Correction].

Enabling method 2: In the system settings, select [Projection Settings] -> [More Image Correction Settings] -> [Keystone Correction Settings] -> [Displacement Auto Keystone Correction]. When the system detects device movement after enabling, it will trigger the “Auto Keystone Correction” feature.

How does Screen Alignment Assist work on the XGIMI AURA 2?

The device will automatically identify the screen within the projected image and adjust the four sides of the projected image to align with the edges of the screen.

To enable it: In the system settings, select [Projection Settings] -> [Screen Alignment Assist], move the device according to the prompt on the page, and make the four sides of the projected image exceed the edges of the screen. Press the OK button to align the image with the screen.

How can I enable Wall Flatness Adaption on the XGIMI AURA 2 for non-flat projection walls?

When the projection wall is not flat, the device can perform smart adaption to project with optimal image quality. To enable it: In the system settings, select [Projection Settings] -> [More Image Correction Settings] -> [Wall Flatness Adaption] and follow the following steps to complete the adaption:

Use your mobile phone to scan the QR code on the page to open the photo upload page.
Take a photo of the projected image and upload it.
Select the display option after adaption.

How can I enable Wall Color Adaption on the XGIMI AURA 2?

The wall color adaption feature can improve the color of the image projected by the device on a colored wall so that the image appears as if it were projected on a white wall. To enable it: In the system settings, select [Projection Settings] -> [More Image Correction Settings] -> [Wall Color Adaption].

Note: If you switch the device brightness or image mode or use the brightness adaption feature when the wall color adaption feature is enabled, the wall adaption feature will be disabled.

The results of the wall color adaption feature may vary depending on the operating environment and wall color. The Wall Color Adaption feature needs to be enabled in the system settings to take effect. Once activated, it can calibrate the picture based on wall colors with a color temperature ranging from 3000K to 15000K. However, the calibration effect may vary depending on the wall color. For optimal results, it is recommended for use in dimly lit environments.

How can I access Android TV features on the XGIMI AURA 2 after connecting to a wireless network?

After the projector is connected to a wireless network, you can access Android TV online services and enjoy movies, music, and pictures. In addition to the pre-installed apps, you can also install other apps from the Google Play store and ask Google Assistant to help via various voice commands.

Press the Google Assistant button on your remote to search for movies and shows, get recommendations and answers, control smart home devices, and more!

You can project photos, videos, and music from your smartphone or PC directly to your projector by:

Playing a video clip with a smartphone or PC app that supports Chromecast built-in™, and then selecting on the screen.
Selecting the target device, “XGIMI AURA 2,” to begin projecting your smartphone content.

Note: Make sure the projector and your smartphone or PC are connected to the same network.

How can I connect a Bluetooth Speaker to the XGIMI AURA 2?

Open [System Settings] and choose [Remotes & Accessories] -> [Add New Device]. Search for and pair a Bluetooth speaker. To switch back to the projector speaker while the Bluetooth speaker is connected, press and then choose [Sound Output] -> [Internal Speaker].

How can I play music via Bluetooth on the XGIMI AURA 2?

Use smartphone Bluetooth settings to search for “XGIMI AURA 2” to pair with the device and play songs.

How do I play local music on the XGIMI AURA 2 using Bluetooth music?

When your smartphone Bluetooth is connected to XGIMI AURA 2, the XMusic Player app will open automatically. You can also select on the homepage to go to the app list and open the app. If you need to turn off the projection frame during music playback, you can press the button and select “Display Off.”

For local music, you can access an internal or external storage device using the built-in app File Manager. Open a music file, and it will play on the XMusic Player app by default.

Note: Some wallpapers may contain flashing lights and spectrums that may trigger epileptic seizures. If you experience dizziness, convulsions, or vision changes, switch the wallpaper to “Classic CD” and seek medical attention.

How can I check for and perform a System Upgrade on the XGIMI AURA 2?

Check for the latest version and upgrade the system by selecting [Settings] -> [Device Preferences] -> [About] -> [System Update].

What are the main settings available on the XGIMI AURA 2?

The main settings include:

Brightness: In the brightness settings, you can press the button to switch between levels 1 to 10 of the brightness mode. If you need higher brightness, you can enable level 10+ to enter Boost mode.
Image Mode: When watching content or movies through HDMI, you can choose different image modes for different content (such as movies, sports, TV, games) to enjoy the optimal watching experience. Modes include: Standard, TV, Movie, Sport, Brilliant, Custom, High Power, and Game.
Sound Effect: XGIMI AURA 2 offers professional sound quality with DTS Studio Sound and Harman Kardon. Select different sound effects for different scenarios, such as movie, music, and sport, to enjoy the optimal sound experience.
Eco Mode: The device will automatically reduce the brightness when it does not detect any person. After some time, the screen turns off automatically. The screen turns back on automatically when someone is detected. The default waiting duration before the screen is turned off is 15 minutes, and it can be adjusted according to personal preferences.

What are the LED indicator statuses on the XGIMI AURA 2 and what do they mean?

The LED indicator statuses are:

LED indicator status	Description
Steady on	1. The device is being powered on after the power cord is plugged in. 2. The device is being powered on/off. 3. The device is restarting.
Slow pulsing, as if breathing	1. The device enters eco mode. 2. The device is powered on and “Display Off” is pressed.
Fast flashing	The auto lens cover cannot be opened/closed properly.

What is the Bluetooth transmitter frequency range and power for the XGIMI AURA 2?

Bluetooth transmitter frequency range: 2402 MHz -2480 MHz. Bluetooth transmitter power: <10 dBm(EIRP).

What is the 2.4G Wi-Fi transmitter frequency range and power for the XGIMI AURA 2?

2.4G Wi-Fi transmitter frequency range: 2412 – 2472 MHz. 2.4G Wi-Fi transmitter power: <20 dBm (EIRP).

What is the 5G Wi-Fi transmitter frequency range and power for the XGIMI AURA 2?

5G Wi-Fi transmitter frequency range: 5.15-5.35GHz, 5.470-5.725GHz, 5.725-5.850GHz. 5G Wi-Fi transmitter power: 5.15-5.25GHz <23dBm(EIRP), 5.25-5.35GHz <20dBm (EIRP), 5.470-5.725GHz <20dBm (EIRP), 5.725-5.825GHz <13.98dBm(EIRP).

What is the operating frequency range and maximum transmit power for the 24G millimeter-wave radar in the XGIMI AURA 2?

This product’s 24G millimeter-wave radar operates in the frequency range of 24.00GHz-24.25GHz and has a maximum transmit power of 100mW(EIRP). Note: This power is for EU only.

What are the recommended operating conditions for the XGIMI AURA 2?

The device should be used in a dry and ventilated environment. Do not store the device in overheated or overcooled places, because extreme temperatures will shorten the life of electronic devices. Place and use the device in an environment of 0°C-40°C.

How should I clean the lens of the XGIMI AURA 2?

Do not wipe the lens directly with cleaning tools including paper and cloth in order to avoid damage to the lens. Please clean up the dust on the lens surface through clean air blowing.

What should I do if dust accumulates on the chassis fabric of the XGIMI AURA 2?

When dust accumulates on the chassis fabric, use a small brush or a miniature vacuum cleaner to remove it.

What precautions should be taken when moving the auto lens cover of the XGIMI AURA 2?

During the movement of the auto lens cover, ensure that there are no obstacles so that the auto lens cover can be opened/closed properly. Do not place your hands around the lens cover during the movement of the auto lens cover or you may be pinched. If the auto lens cover cannot be opened/closed properly, check for obstructions around the lens cover and the slide rail. Remove the obstructions and try again. Do not forcibly push or pull the auto lens cover as it may be damaged.

What is the default waiting duration before the screen of the XGIMI AURA 2 turns off in Eco Mode, and can it be adjusted?

The default waiting duration before the screen is turned off is 15 minutes, and it can be adjusted according to personal preferences.

What does it mean when the LED indicator on the XGIMI AURA 2 is steady on?

A steady on LED indicator means: 1. The device is being powered on after the power cord is plugged in. 2. The device is being powered on/off. 3. The device is restarting.

What causes the XGIMI AURA 2 LED indicator to slow pulse, as if breathing?

A slow pulsing LED indicator means: 1. The device enters eco mode. 2. The device is powered on and “Display Off” is pressed.

What does a fast flashing LED indicator on the XGIMI AURA 2 signify?

A fast flashing LED indicator means the auto lens cover cannot be opened/closed properly.

How can I adjust the brightness on the XGIMI AURA 2?

In the brightness settings, you can press the button to switch between levels 1 to 10 of the brightness mode. If you need higher brightness, you can enable level 10+ to enter Boost mode.

What image modes are available for content viewed through HDMI on the XGIMI AURA 2?

When watching content or movies through HDMI, you can choose different image modes for different content to enjoy the optimal watching experience. The modes are:

Standard: For most daily usage scenarios
TV: For watching TV series
Movie: For watching movies
Sport: For watching sports events
Brilliant: For more vivid colors
Custom: Customize image parameters such as contrast, saturation, clarity, noise reduction and motion compensation levels
High Power: For higher brightness
Game: For playing video games with low latency