XGIMI MOGO 3 PRO (01) PDF Document

The XGIMI MOGO 3 PRO features the following connection ports for external devices:

USB Type-C: Supports PD3.0 power input.

Micro HDMI: Supports ARC (Audio Return Channel).

USB 2.0: For connecting compatible USB peripherals.

Power Port: For the dedicated power connection.

The remote control for the XGIMI MOGO 3 PRO includes the following buttons and functions:

Power: Turns the device on or off.

Google Assistant: Activates voice search and smart home controls.

Streaming Media: Quick access to streaming services.

Shortcut: Custom or preset shortcut functions.

Profile: Switch between user profiles.

Input: Select the source signal.

Focus: Adjusts the clarity of the projection.

D-Pad: Navigation button for moving through menus.

Back: Returns to the previous screen.

Home: Returns to the main home screen.

Settings: Opens the device configuration menu.

Volume + and Volume -: Adjusts the audio output levels.

To turn on the device:

Step 1. Connect the power cable to the device and wait for the indicator light to go out.

Step 2. Lift the projector to turn it on.

Step 3. Rotate the projector to enter viewing mode.

To shut down the device while it is powered on, press and hold the power button or close the projector vertically.

Follow these steps to pair the remote control:

Step 1. Position the remote control within 10cm of the device.

Step 2. Press the “Back” and “Home” buttons simultaneously.

Step 3. An indicator light will begin flashing as the remote enters pairing mode. Release the buttons when the flashing begins.

Step 4. Once you hear a “ding” sound, the connection is successful. If pairing fails, wait 30 seconds and repeat the steps above.

You can use the focus key on the remote control to sharpen the image. Press the focus key once for auto focus. To use manual focus, press and hold the focus key and then use the left and right keys on the D-Pad to adjust the focus manually.

When automatic keystone correction is enabled, the frame adjusts automatically if you move the device. If automatic obstacle avoidance is enabled, the frame will automatically avoid objects in the projection area. Additionally, the automatic screen alignment function will match the frame to a 16:9 or 16:10 screen if one is detected.

To access these settings, use the settings button on the remote and go to Settings > Projector > Keystone > Auto Keystone Correction. You can also select Manual Keystone Correction to manually adjust the four points and the size of the frame.

Online upgrades can be performed through the system settings. Navigate to the settings menu using the remote control and select the system settings option to check for and perform an online upgrade.

The XGIMI MOGO 3 PRO uses a power adapter with the following ratings:

Input: AC 100V-240V, 50/60 Hz, 1.8A Max

Output: DC 20.0V, 3.25A

Follow these safety guidelines to ensure proper operation:

Do not stare directly into the projector lens as the bright light may be harmful to your eyes.

Do not block the air inlet or outlet to prevent heat dissipation issues and internal damage.

Do not wipe the lens with cleaning paper or cloth; use an air blower to remove dust.

Operate the device in a dry and ventilated environment with temperatures between 0 degrees Celsius and 40 degrees Celsius.

Do not place the device in heating equipment like microwaves or dryers.

Only use attachments and accessories specified by the manufacturer, such as the dedicated power supply adapter.

The XGIMI MOGO 3 PRO is allowed to be used in the following EU member states as outlined in the Declaration of Compliance:

Note that operations in the 5.15-5.25 GHz band are restricted to indoor usage only.