Free English XGIMI H2 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD XGIMI H2 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the functions of the buttons on the XGIMI H2 remote control?
The remote control for your XGIMI H2 has the following functions:
1. On/off: Powers the device on or off.
2. Air Mouse: Toggles the air mouse cursor function.
3. Menu / Shortcut: Opens the menu or a shortcut.
4. OK / Directions: A directional pad for navigation and an OK button to confirm selections.
5. Return: Goes back to the previous screen or menu.
6. Home: Takes you to the home screen.
7. Volume+ (Focus+): Increases the volume or manually adjusts the focus when in focus mode.
8. Volume- (Focus-): Decreases the volume or manually adjusts the focus when in focus mode.
9. Function Switch: Switches the function of the +/- buttons between Volume control and Focus control.
How do I power on or off my XGIMI H2?
To power on or off your XGIMI H2, first connect the power cable to the device and a power outlet. Then, press the power button on the device to turn it on or off.
How do I pair the remote control with my XGIMI H2?
To pair the remote control with your XGIMI H2, position the remote within 10cm of the device. Press and hold the “return” and “home” buttons simultaneously. Release the buttons when the power key on the remote begins to flash. The remote will then pair with the device.
How can I adjust the focus on my XGIMI H2?
You can adjust the focus on your XGIMI H2 using either the auto-focus or manual focus feature on the remote control.
Auto Focus: Switch the function key (labeled VOL/Focus) on the bottom of the remote to the right. Your XGIMI H2 will then automatically focus.
Manual Focus: To manually adjust the focus, ensure the function key is switched to the right (Focus mode). Then, press the “+” or “-” buttons to fine-tune the focus until the image is sharp.
What should I do if my XGIMI H2 is causing interference with my radio or television reception?
If you determine that your XGIMI H2 is causing harmful interference with your radio or television reception (which can be confirmed by turning the projector off and on), you are encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD XGIMI H2 (01) PDF DOCUMENT