WISBERG WBSBSIW177CB (01) PDF Document

Press the TEMP. SELECT button to set the temperature of the refrigerator. At this point the cooling temperature icon will illuminate and the digital temperature display will flash. You can then set the temperature with the + and – buttons. The selected temperature is only set definitively after the display is locked. The minimum refrigerator temperature is 2 degrees, and the maximum is 8 degrees.

Press the TEMP. SELECT button to set the temperature of the freezer. The freezer icon will illuminate and the digital display will flash. You can then set the temperature with the + and – buttons. The temperature is set definitively after the display is locked. The minimum freezer temperature is -16 degrees, and the maximum is -24 degrees.

The recommended temperature setting for this appliance is 4 °C for the refrigerator and -18 °C for the freezer.

Press and hold the Mode Select button for three seconds to activate or deactivate the lock function.

To unlock: When the buttons are locked, press and hold the Mode Select button for 3 seconds; the buttons are unlocked and the Lock On/Off indicator disappears.

To lock: When the buttons are unlocked, press and hold the Mode Select button for 3 seconds; the buttons are locked and the Lock On/Off indicator appears on the display.

Press the Mode Select button to switch the holiday mode on or off. The holiday mode is switched on after the display is locked, and the holiday mode indicator appears on the display. This function is useful during long-term absence, as the fridge cooling is switched off completely and the freezer temperature is set to -18 degrees. To deactivate, unlock the display first, then press the Mode Select button.

Press the Mode Select button to select the Super Cool mode. When selected, the refrigerator is additionally cooled, reducing the temperature temporarily for six hours to 2 degrees. This is useful when many products are placed in the refrigerator at once. It switches off automatically after six hours. To deactivate manually, press the Mode Select button.

Press the Mode Select button to select the Super Freeze mode. When selected, the freezer is additionally cooled, reducing the temperature to -24 degrees. This is useful when many products are placed in the freezer at once. The mode switches off automatically after 40 hours. To deactivate manually, press the Mode Select button.

If the refrigerator door remains open for more than 2 minutes, the alarm sounds every minute. You can switch this off by closing the door or by pressing the + and – buttons for 3 seconds.

Step 1. Slide the water tank out of the refrigerator.

Step 2. Open the water inlet cover on the water tank.

Step 3. Add drinking water from bottles or alkaline water, without exceeding the maximum level.

Step 4. Close the water inlet cover.

Step 5. Push the water tank back into the refrigerator until it is securely in place.

Note: Only fill with drinking water such as mineral water or purified water. Do not exceed the maximum level.

Step 1. Press the Water icon. The icon lights up.

Step 2. Push the glass against the dispenser lever and fill the glass with cold water.

Step 3. Pull the glass away from the dispenser lever to stop taking water.

Step 1. Press the Crushed icon. The icon lights up.

Step 2. Place the glass against the mouth of the dispenser to prevent spillage.

Step 3. Push the glass against the dispenser lever and fill the glass with crushed ice.

Step 4. Pull the glass away from the dispenser lever to stop taking crushed ice.

Step 1. Press the Cubed icon. The icon lights up.

Step 2. Push the glass against the dispenser lever. The glass is filled with ice cubes.

Step 3. Pull the glass away from the dispenser lever to stop taking ice cubes.

Step 1. Empty the water tank by taking water until it is empty.

Step 2. Pull the water tank out of the refrigerator.

Step 3. Lift the water tank out of the holder.

Step 4. Clean the water tank.

Step 5. Put the water tank back in the holder.

Step 6. Fill the water tank with two liters of water.

Step 7. Clean the water pipe.

Step 8. Fill the water tank completely.

Step 9. You can use the function for taking water normally again.

Possible causes include: incorrect temperature setting, plug not inserted properly, no power in the socket, blown fuse, or the appliance is in a location below 10°C.

Solutions: Set the thermostat to a different position, insert the plug correctly, have the socket repaired by an electrician, check/replace the fuse, or move the appliance to a location above 10°C.