VTECH CS6124 (02) PDF MANUAL


Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD VTECH CS6124 (02) PDF MANUAL


PDF Content Summary: Set number of rings You can set the answering system to answer an incoming call after 2, 3, 4, 5 or 6 rings; or toll saver. If you choose toll saver, the answering system answers a call after 2 rings when you have new messages, or after 4 rings when you have no Quick start guide (Canada version) CS6124/CS6124-11/CS6124-2/ new messages. Press MENU when the handset is not in use. Scroll to Answering sys then press SELECT. CS6124-21/CS6124-31 Scroll to Ans sys setup then press SELECT. Scroll to # of rings then press SELECT. Press CID or to choose 6, 5, 4, 3, 2 or Toll saver and then press SELECT to save. Introduction This quick start guide provides you with the basic installation instructions. A limited set of features are described in abbreviated form. Record your own announcement You can use the preset announcement to answer calls, or replace it with your own recorded announcement. The announcement can be Please refer to the online user’s manual for complete installation and operation instructions. up to 90 seconds in length. Press MENU when the handset is not in use. Telephone base and charger installation Install the telephone base and charger as shown below. Scroll to Answering Sys then press SELECT twice. Press 7 to record. After the handset announces, “Record after the tone. Press 5 when you are done,” speak towards the handset microphone. Press 5 when done. Press 2 to play the recorded announcement; or 7 to record again if desired. Press 3 to delete the recorded announcement. Press 5 to stop the playback at any time. Use only the power adapters and batteries supplied with this product. 1.2.3.4.5.1.2.3.4.Telephone wall jack 5.A DSL filter 6. (not included) is required if you have DSL high-speed Internet service Telephone line cord Telephone base IMPORTANT! Refer to the online user’s manual for a full set of installation and operation instructions. For manual download or customer service, visit our website at vtechcanada.com or call 1 (800) 267-7377. Copyright © 2012 for VTECH TELECOMMUNICATIONS LTD. All rights reserved. Printed in China. 96-008393-020-100 Telephone base power adapter Charger Electrical outlet (not controlled by a wall switch) Charger adapter Battery installation and charging Install the battery as shown below. Once you have installed the battery, you may be able to make and receive short calls. For best performance, charge the handset battery continuously for at least 16 hours. 1 Plug the battery connector 2 Place the battery with the securely into the socket. wires inside the battery compartment. 3 Slide the battery compartment cover towards the center of the handset until it clicks into place. Enter the handset menu Press MENU when the phone is not in use. Press CID or until the screen displays the desired feature menu. Press SELECT to enter that menu. To return to the previous menu, press CANCEL. To return to idle mode, press and hold CANCEL. Set date and time Press MENU when the handset is not in use. Scroll to Settings then press SELECT. Scroll to Set date/time then press SELECT. Use the dialing keys (0-9) to enter the current month, date and year. Then press SELECT. Use the dialing keys (0-9) to enter the hour and minute. Then press CID or to select AM or PM. Press SELECT to save. 4 Charge the handset in the telephone base or charger. ChARgE light remains on when charging. 1.2.3. ••1.2.3.4.5.6.


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply