Free English VORNADO PIVOT (02) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD VORNADO PIVOT (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the features of the VORNADO PIVOT personal circulator?
The VORNADO PIVOT includes the following features:
THREE SPEEDS: Speed setting for every comfort level.
PIVOTING HEAD: Direct the airflow where you want it.
SILICONE FEET: Non-marking feet added for stability.
FINGER FRIENDLY DESIGN: Resists curious fingers.
AIR INLETS: Signature inlets and powerful motor to move more air.
WARNING: Choking Hazard. Keep small parts like silicone feet away from children and pets.
How do I operate the controls of the VORNADO PIVOT?
To operate the VORNADO PIVOT, use the POWER ON/OFF control dial.
Select High (III), Medium (II), or Low (I) fan speed, or turn the power off by selecting (O).
What are the cleaning instructions for the VORNADO PIVOT?
Because your VORNADO PIVOT moves a substantial amount of air, it will need regular cleaning. The fan has no user serviceable parts inside and cannot be opened for cleaning. Follow these steps to clean the unit:
1. Power off and unplug the unit prior to cleaning.
2. Dust or wipe the circulator with a damp cloth.
3. Use the brush attachment on your household vacuum cleaner to vacuum any accumulated dust.
How should I store my VORNADO PIVOT when not in use?
During the off-season or after extended periods of non-use, you may choose to store your VORNADO PIVOT. To ensure the long life of the product, it is recommended to store your circulator by following these instructions:
Tip: Cleaning is recommended before storage.
1. Unplug the power cord and bundle it loosely.
2. Cover, or place back in the retail carton if available. This prevents the circulator from accumulating dust over time.
3. Store the circulator in a cool and dry location.
How do I troubleshoot common issues with my VORNADO PIVOT?
| PROBLEM | POSSIBLE CAUSE AND SOLUTION |
|---|---|
| Unit fails to power on. |
Unit is not plugged in. Plug Power Cord into electrical outlet. Ensure unit fan speed setting is selected. Plug fuse has blown. Replace fuse. Unit is damaged or in need of repair. Cease usage and unplug. The outlet is worn or damaged. Try another outlet or contact a qualified electrician. |
| Airflow is weak or slow. |
Unit set to a low speed setting. Adjust to a higher speed setting. Airflow is blocked. Remove obstruction. Adjust direction of airflow towards the user. |
| GFCI has tripped. | Under certain conditions, it is possible for a reset GFCI (Ground Fault Circuit Interrupter) outlet to trip when the user is changing speeds on a Vornado circulator. In this event, change to an outlet that is not connected to a GFCI device. It could also indicate a weak or defective GFCI outlet. Contact a qualified electrician to check the GFCI outlet. |
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD VORNADO PIVOT (02) PDF DOCUMENT