VIZIO D43-E2 (01) PDF Document

The package for the VIZIO D43-E2 contains the following items:

• VIZIO TV Display

• TV Stands

• Power Cable

• Quick Start Guide

• IR Remote with Batteries

• 4 x Phillips Screws

Two AAA batteries are included for you to use with the basic remote control. To insert or replace the batteries:

1. Remove the battery cover by pressing gently on the logo and sliding away from the remote. Insert two AAA batteries (included).

2. Be sure to align the + and – signs on the batteries and remote. Gently slide the battery cover back into place.

WARNING: keep the remote control batteries away from children. It may cause choking and/or lead to a fire or chemical burn if mishandled. Do not dispose of batteries in fire. Replace only with batteries of the correct type.

It is recommended that two people take part in the stand installation.

Step 1: Prepare the TV

• Remove any plastic film from the TV and stands.

• Place the TV screen-down on a clean, flat surface. To prevent scratches or damage to the screen, place the TV on a soft surface such as a carpet, rug, or blanket, and avoid any sharp edges.

• Make sure the top and bottom edges of the screen are being supported by the surface to avoid damage.

Step 2: Attach the Stands

• Insert the stands into the base of the TV. (The stands are identical.)

• Secure each stand to the TV with two (2) Phillips screws (included).

• Insert the screws into the back of the TV and tighten them using a Phillips screwdriver.

• When you are finished, place the TV on a stable, level surface.

1. Connect your devices. Connect all of your devices to the TV first. Choose one connection type for each device (e.g., HDMI, Component, AV).

2. Connect the power cable. Connect one end of the power cable to the back of the TV. The flat edge of the connector faces the outer edge of the TV. Plug the other end of the power cord into an electrical outlet.

3. Connect to the Internet (optional). If you have a high-speed Internet connection, connect an Ethernet cable from your modem or router to the back of your TV for the best experience. The TV also has built-in Wi-Fi.

4. Turn on the TV and follow the on-screen guide. Turn the TV on by pressing the POWER button on the remote. The Guided Setup will be displayed.

• Use the Arrow buttons on the remote to select Home Use and press OK.

• Use the Arrow buttons on the remote to select your preferred language and press OK.

• Follow the remaining on-screen instructions to complete the first-time setup.

1. Press the MENU button on the Remote Control to display the TV SETTINGS menu.

2. Highlight User Manual and press OK.

• Use the Up and Down Arrow buttons to select the chapter you want to view.

• Use the Left and Right Arrow buttons to browse through the pages in each chapter.

• Press the EXIT button to exit the on-screen User Manual.

• Press the BACK button to return to the Table of Contents Page.

To access the Accessibility menu:

1. Press the Menu button on the remote control.

2. Use the Arrow and OK buttons to navigate and select System → Accessibility.

From here you can adjust the following settings:

• Talk Back – Turn Text-to-Speech Talk Back On or Off. This feature enables your TV to speak all settings changes and adjustments using the remote in English.

• Speech Rate – Adjusts the rate in which Text-to-Speech is spoken. Select Slow, Normal (Default), or Fast.

• Zoom Mode – Enlarges a section of the screen by 200%.

To access the Closed Caption menu:

• Press the Menu button on the remote control.

• Use the Arrow and OK buttons to navigate and select Closed Captions.

If you have already set up a wireless connection during the first-time setup, you can skip this section. To connect to a wireless network you will need a Wireless Router, High-speed Internet connection, SSID (Wireless network name), and Network Password.

1. From the TV SETTINGS menu, highlight Network and press OK. The Network Setup guide is displayed.

2. Highlight the name of your wireless network (this is the network’s SSID) and press OK.

3. If you do not see your SSID, you will need to enter it manually by selecting Hidden Network.

4. Using the on-screen keyboard, enter your network’s password, then highlight Connect and press OK.

For best streaming video, your Internet connection speed should be 1.5 Mbps or higher. If you are having trouble connecting, check your router placement as walls, large metal objects, and other broadcasting devices can interfere with the signal.

VIZIO Internet Apps Plus® (V.I.A. Plus) delivers popular online content to your TV. A high-speed Internet connection is required.

• To display the V.I.A. Plus App Dock, press the V Button.

• To scroll through the Apps on the dock, press the Left/Right Arrow buttons. The highlighted App is in the center of the dock.

• To launch an App, highlight it and press the OK button.

• To launch the fullscreen V.I.A. Plus Apps window, press the V Button twice. This window allows you to add and store apps.

Your TV can output sound to an audio device, such as a receiver or sound bar. To connect your TV to an audio device:

1. Verify that your device has an audio port that matches an available port on the TV (HDMI, Digital Optical, RCA, etc.).

2. Turn the TV and your audio device off.

3. Connect the appropriate cable (not included) to the TV and the device.

4. Turn the TV and your device on.

To reset the TV to factory defaults, which will return you to the initial Setup App, press MENU > System > Reset & Admin > Reset TV to Factory Defaults. If you have changed the default Parental Control Passcode, enter it now. Select Reset. Remember that all of your settings will be lost.

• Press the VOLUME UP button on the remote.

• Press the MUTE button on the remote to ensure that mute is off.

• Press MENU > Audio. Be sure TV Speakers is set to On.

• Be sure your connected devices are turned on.

• Press the INPUT button on the remote and select the input to which your device is connected (HDMI-1, HDMI-2, COMP, etc.).

• Note that some television channels add black bars to the picture.

• Set the TV to Wide or Zoom mode. Press the WIDE button, highlight Wide or Zoom, and press OK.

• Adjust the video settings of your external device.

• Be sure the power cord is securely connected to the AC socket on the TV and to a working electrical outlet.

• Press the POWER button on the remote or on the side of the TV.

• If the above steps do not work, try plugging the power cord into a different outlet.

• Be sure your TV is connected to the Internet.

• Restart the App by pressing the EXIT button to close the App, then open the App.

• Reboot your TV by pressing the POWER button on the remote, then turn it back on.

• If you are using an Ethernet cable, ensure it is securely connected to your router/modem and the TV.

• If you are connecting wirelessly, try repositioning your router for the best connection.

• Turn off all devices. Restart your router/modem.

• Try to use another internet-connected device. If it is not working, call your Internet Service Provider (ISP).

• Make sure the batteries are properly inserted, matching the – and + symbols.

• Replace the batteries with fresh ones.

Caution: Battery cells may explode. Do not dispose of the battery in a fire or with ordinary household waste. Dispose of batteries promptly. Replace the battery only with the same or equivalent type of battery recommended by VIZIO.