Free English VENTS NB MICRA 110 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD VENTS NB MICRA 110 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is the purpose of the VENTS NB MICRA 110 outer ventilation hood?
The outer ventilation hood, referred to as the “hood,” is designed to prevent ingress of water and foreign objects into the ventilation equipment from outside.
What components are included in the delivery set for the VENTS NB MICRA 110?
The delivery set includes the following items:
Hood: 1 pc.
Installation instruction: 1 pc.
Fastening kit: 1 pc.
Packing box: 1 pc.
What are the overall dimensions in mm for the VENTS NB MICRA 110?
The dimensions for the VENTS NB MICRA 110 are as follows:
| Dimension | Value [mm] |
| Ød | 4.8 |
| ØD | 98 |
| A | 518 |
| A1 | 400 |
| A2 | 270 |
| B | 107 |
| H | 230 |
| H1 | 150 |
What is the first step in installing the VENTS NB MICRA 110 hood?
Step 1 is to insert the air duct from indoors to protrude from outside on the outer wall surface. Then, cut the air duct excess with a hack saw or with any other suitable tool. The protrusion should be 10-12 mm.
How should the VENTS NB MICRA 110 hood be disassembled for installation access?
To enable access to the fastening holes, disassemble the hood. This involves removing the screws that secure the front part of the hood and then removing the front part.
What is required for marking the mounting holes for the VENTS NB MICRA 110 installation?
Use the back part of the ventilation hood to mark the mounting holes. Drill 4 holes for 6×40 dowels to a depth of 50 mm.
How is the back part of the VENTS NB MICRA 110 hood fixed to the wall?
First, insert the supplied expansion anchors 6×40 into the drilled holes. Then, fix the back part of the hood on the wall using the supplied screws 4×40.
What is the final step in assembling the VENTS NB MICRA 110 hood after fixing the back part?
Place the front part of the hood on the back part and secure it with screws.
What warning applies if the mounting place for the VENTS NB MICRA 110 is at high altitude?
If the mounting place is located at high altitude please refer to a mounting company possessing an appropriate mounting equipment!
Who should operate the VENTS NB MICRA 110 unit?
The unit should not be operated by children or persons with reduced physical, mental, or sensory capacities, or those without the appropriate training.
Who is permitted to install and connect the VENTS NB MICRA 110 unit?
The unit must be installed and connected only by properly qualified personnel after the appropriate briefing.
What consideration must be given to the choice of installation location for the VENTS NB MICRA 110?
The choice of unit installation location must prevent unauthorised access by unattended children.
CLICK HERE TO DOWNLOAD VENTS NB MICRA 110 (01) PDF DOCUMENT