Free English VENTS NB MICRA 200 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD VENTS NB MICRA 200 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is the purpose of the outer ventilation hood for the VENTS NB MICRA 200?
The outer ventilation hood (hereinafter referred to as the “hood”) is designed to prevent ingress of water and foreign objects into the ventilation equipment from outside.
What components are included in the delivery set for the VENTS NB MICRA 200?
The delivery set includes the following items:
Hood: 1 pc.
Installation instruction: 1 pc.
Fastening kit: 1 pc.
Packing box: 1 pc.
What are the overall dimensions for the VENTS NB MICRA 200?
The dimensions for the VENTS NB MICRA 200 are as follows in [mm]:
| Model | Ød | ØD | A | A1 | A2 | B | H | H1 |
| NB MICRA 200 | 4.8 | 98 | 488 | 370 | 240 | 107 | 230 | 150 |
What safety precautions must be observed when installing the VENTS NB MICRA 200?
The following safety precautions must be observed:
THE UNIT SHOULD NOT BE OPERATED BY CHILDREN OR PERSONS WITH REDUCED PHYSICAL, MENTAL, OR SENSORY CAPACITIES, OR THOSE WITHOUT THE APPROPRIATE TRAINING.
THE UNIT MUST BE INSTALLED AND CONNECTED ONLY BY PROPERLY QUALIFIED PERSONNEL AFTER THE APPROPRIATE BRIEFING.
THE CHOICE OF UNIT INSTALLATION LOCATION MUST PREVENT UNAUTHORISED ACCESS BY UNATTENDED CHILDREN.
What should be considered if the mounting place for the VENTS NB MICRA 200 is located at high altitude?
If the mounting place is located at high altitude please refer to a mounting company possessing an appropriate mounting equipment!
What is the first step in installing the VENTS NB MICRA 200?
Step 1 is to insert the air duct from indoor to protrude from outside on the outer wall surface. Then, cut the air duct excess with a hack saw or with any other suitable tool, leaving 10-12 mm protruding.
How should the VENTS NB MICRA 200 hood be disassembled for installation?
To enable access to the fastening holes, disassemble the hood. First, remove the screws that secure the front part of the hood and then remove the front part.
How do you mark the mounting holes when installing the VENTS NB MICRA 200?
Mark the mounting holes using the back part of the ventilation hood. Then, drill 4 holes for 6×40 dowels to a depth of 50 mm.
How is the back part of the VENTS NB MICRA 200 hood fixed to the wall?
Insert the supplied expansion anchors 6×40 into the holes. Then, fix the back part of the hood on the wall using the supplied screws 4×40.
What is the final step in securing the VENTS NB MICRA 200 hood after fixing the back part?
Place the front part of the hood on the back part and secure with screws.
CLICK HERE TO DOWNLOAD VENTS NB MICRA 200 (01) PDF DOCUMENT