Free English VALCOM V-9808 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD VALCOM V-9808 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I prepare the wall for installing the VALCOM V-9808?
Remove the VALCOM V-9808 Vandal Resistant Faceplate from the packing container. Hold the faceplate in the desired position on the wall and mark the location of mounting holes. Depending on wall construction type, prepare the mounting hole locations on the wall to securely attach the faceplate.
Does the VALCOM V-9808 include a speaker?
No, the VALCOM V-9808 does not include a speaker. The speaker is sold separately.
How do I attach a speaker to the VALCOM V-9808?
Mounting studs and nuts are provided on the back of the grille/baffle assembly to securely attach any Valcom 8″ speaker. Follow these steps:
1. Remove the four nuts from the studs.
2. Align speaker mounting holes on the studs.
3. Install and securely tighten the nuts.
How do I finalize the mounting of the VALCOM V-9808 to the wall?
First, connect the cable to the speaker. Then, use mounting hardware (not included) appropriate for the wall type to securely mount the enclosure to the wall.
What are the dimensions of the VALCOM V-9808?
The dimensions of the VALCOM V-9808 are 10.00″H x 12.25″W x 16 GA (25.4cm H x 31.12cm W x 16 GA).
What is the weight of the VALCOM V-9808?
The VALCOM V-9808 weighs 2.4 lbs. (1.1 kg).
What type of fasteners are used for the VALCOM V-9808 assembly?
The assembly utilizes 8-32 x .75″ Button Head Machine Screws and #8-32 Keps Nuts in 4 places.
CLICK HERE TO DOWNLOAD VALCOM V-9808 (01) PDF DOCUMENT