Free English VALCOM V-450 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD VALCOM V-450 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the applications for the VALCOM V-450?
The VALCOM V-450 is designed for use with Valcom Paging Systems.
What are the features of the VALCOM V-450?
The features of the VALCOM V-450 include:
Dynamic element
Omnidirectional pickup pattern
Chrome screen with a black housing
4 foot, 4 conductor, 2 shielded cable with cable permanently attached
Pushbutton sealed micro switch
5/8″-27 mounting thread
Mounting flange included
Low impedance (balanced)
What are the dimensions and weight of the VALCOM V-450?
Microphone: 1-3/4″ D x 4-5/8″ L
Gooseneck: 19″ L
Weight: 1.3 lbs. (.59kg)
What are the technical specifications of the VALCOM V-450?
Element: Dynamic
Pattern: Omnidirectional
Frequency Response: 50 to 12K Hz
Output Impedance: Lo Z 400 Ohms
Output Level: Lo Z -58 dB (0db = 1 mw/10 microbars) -152 dB EIA
How do I connect the VALCOM V-450 to the V-9939C Microphone Adapter?
To connect the VALCOM V-450 shielded cable to the V-9939C Microphone Adapter, use the following connecting arrangement based on the wire colors:
RED (+): Connect to LO Z1
SHIELD: Connect to MIC SHIELD
BLACK (-): Connect to LO Z2
GREEN: Connect to GND OUT
WHITE: Connect to SWITCH
CLICK HERE TO DOWNLOAD VALCOM V-450 (01) PDF DOCUMENT