GOODBABY UU 24 (01) PDF Document

Strangulation Hazard: Children can become entangled in cords. Power cords should be kept more than 3 feet away from the crib and baby’s reach all the time. Baby monitors and cameras with power cords should never be hung on or near the crib. This product is not a toy and should be kept out of children’s reach.

Aim to provide the best viewing area: Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight.

Avoid installing the camera where there are thick walls or obstructions between the camera and the monitor.

Never place the camera or cords within 3 feet of the crib or playpen.

Any large metal object, like a refrigerator, a mirror, a filling cabinet, metallic doors or reinforced concrete between the baby and parent unit may block the radio signal.

The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical equipment, such as TV, computers, cordless or mobile phones, fluorescent lights or dimmer switches.

Use of other 2.4GHz products, such as wireless networks (Wi-Fi routers), Bluetooth systems, or microwave ovens, may cause interference with this product, so keep the baby monitor away at least 5ft (1.5m) from these types of products, or turn them off if they appear to be causing interference.

Only use the A/C adapter included in the package (5V, 700mA). Use the provided AC adapter to connect the wall outlet with the baby unit. Once the adapter connects, the unit will turn on automatically and the power LED will light up.

Only use the A/C adapter included in the package (5V, 700mA). The parent unit is supplied with a built-in rechargeable Li-ion battery. Press and hold the power key on the front side of the parent unit. Once the parent unit is turned on, the power LED will light up and the image will display on the LCD screen.

To adjust the volume: Press the UP key to increase the volume. Press the DOWN key to decrease the volume.

To adjust the brightness: Press the Left key to decrease the brightness. Press the Right key to increase the brightness.

Press and hold the Zoom/CAM key for around 2 seconds to operate Zoom in / out. At the Zoom mode, press the navigation key to Pan/Tilt the image. During digital zoom mode, the zoom icon will be displayed on the top of the screen.

Note: If you want to adjust the volume/Brightness, you have to exit the Zoom mode before you operate it.

Note: This function is only available if you have paired two or more cameras.

Press the Zoom/CAM key to view/scan the camera. During scan mode, the scan icon will be displayed on the top of the screen. Each camera’s video will stay on the LCD for around 10 seconds then change to the next camera.

To talk, press and hold the talk key on the front of the monitor. Release the button when you finish talking and you can listen to the sound from the baby’s room. Bear in mind that you can’t listen to your baby whilst you’re talking to them; to listen to it, you will have to stop pressing this button.

The infrared night vision function allows the camera to pick up images of your baby or the monitored area in dark or low light conditions. In this mode, only black and white images will be displayed on the monitor. The optimum image is 6 feet distance between the baby unit and the object.

You can soothe the baby to sleep by playing a gentle lullaby from the baby or parent unit.

From the Baby Unit: Press the lullaby key on the baby unit to play or stop the lullaby. Press the volume +/- key on the baby unit to increase or decrease the volume of the lullaby.

From the Parent Unit:

1. Press the Menu/OK key and the menu will pop up.

2. Press the LEFT key or RIGHT key until the lullaby icon is highlighted.

3. Press UP key or DOWN key to select.

4. Press OK key to confirm.

This mode allows you to control the sound activation of your baby monitor. The ECO default setting is OFF. If there is no sound around the camera within 30 Seconds, it will stop transmitting. The monitor screen turns off when the camera is not transmitting. When the camera detects the sound is louder than the set sensitivity level, it will start transmitting the signal to the monitor again.

To change the ECO level:

1. Press the Menu/OK key and the menu will pop up.

2. Press the LEFT key or RIGHT key until the ECO icon is highlighted then press UP key or DOWN key to select the desired level.

3. Press OK key to confirm.

You can use the alarm to remind yourself to feed the baby, change diapers, sleep, etc.

1. Press the Menu/key and the menu will pop up.

2. Press the LEFT key or RIGHT key until the alarm icon is highlighted.

3. Press UP key to increment or press DOWN key to decrement.

4. Press OK key to confirm.

Note: If the alarm is ringing and no one answers, then the ringing will last 1 minute and then stop. After 3 minutes the ringing will start again. The ringing will sound up three times total if no one answers.

1. Press the Menu/OK key then the menu will pop up.

2. Press the LEFT key or RIGHT key until the camera icon is highlighted then press UP key or DOWN key to select the desired camera to pair.

3. Press OK key to start the pairing.

4. While the LED is flashing then press the PAIR button on the back of the camera.

5. Once paired, then the screen will display the image from the camera.

6. If unsuccessful, please repeat the above steps.

1. Press the Menu/OK key and the menu will pop up.

2. Press the LEFT key or RIGHT key until the temperature icon is highlighted.

3. Press UP key or DOWN key to select between °C or °F.

4. Press OK key to confirm.

Clean the surfaces of the camera and monitor with a soft, fluff-free cloth. Never use cleaning agents or solvents. If the units become dirty, use a lightly dampened cloth to wipe surfaces, taking care to not allow water into any openings.