FREE ENGLISH TP-LINK BE19000 (01) PDF DOCUMENT.
FREE ENGLISH TP-LINK BE19000 (01) PDF USER GUIDE.
FREE ENGLISH TP-LINK BE19000 (01) PDF USER MANUAL.
FREE ENGLISH TP-LINK BE19000 (01) PDF OWNER GUIDE.
FREE ENGLISH TP-LINK BE19000 (01) PDF OWNER MANUAL.
FREE ENGLISH TP-LINK BE19000 (01) PDF REFERENCE GUIDE.
FREE ENGLISH TP-LINK BE19000 (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH TP-LINK BE19000 (01) PDF REFERENCE MANUAL.
FREE ENGLISH TP-LINK BE19000 (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH TP-LINK BE19000 (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD TP-LINK BE19000 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How to power on the TP-LINK BE19000?
Connect the power adapter to the TP-LINK BE19000 and press the Power button to turn it on. Wait until its LED turns into a solid exclamation point.
Use the charger provided in the package to power on the device. Keep the TP-LINK BE19000 vertical while working.
How to set up the TP-LINK BE19000 using the WPS button?
1. Activate the WPS function on your router by pressing the WPS button. The WPS button might look like one of these: WPS or an icon with two arrows.
2. Immediately press the WPS button on the TP-LINK BE19000 for 1 second, and the top 10 LEDs will start blinking. Wait for the LED turns into a solid vertical line, indicating a successful connection.
WPA3 required for 6 GHz bands does not allow WPS connection. To connect to a router’s 6 GHz band, please connect via the Tether app or web browser.
3. Done. You can connect to the TP-LINK BE19000’s Wi-Fi.
Extended Network Names:
Router’s network name with _EXT at the end
or
Same as your EasyMesh router
Passwords:
Same as your router
How to set up the TP-LINK BE19000 using the Tether App?
1. Download the Tether app.
2. Launch the Tether app, you can create an account or skip the creation and set up directly.
3. Tap the + button and select Range Extender > RE800BE.
4. Follow the app instructions to complete the setup. The LED should turn into a solid vertical line, indicating a successful connection to your router.
How to set up the TP-LINK BE19000 via a web browser?
1. Connect your computer or smartphone to the TP-LINK BE19000’s network TP-Link Extender.
2. Visit http://www.tplinkrepeater.net or http://192.168.0.254 in a web browser. Create a password to log in, and follow web instructions to complete the setup.
4. Follow the app instructions to complete the setup. The LED should turn into a solid vertical line, indicating a successful connection to your router.
How to find a suitable location for the TP-LINK BE19000?
1. Plug in the TP-LINK BE19000 about halfway between your router and the Wi-Fi dead zone. The location you choose must be within the range of your router.
2. Wait for about 2 minutes until the LED indicates that the TP-LINK BE19000 is currently in the suitable location, as shown below. If the LED indicates a weak signal, relocate the TP-LINK BE19000 closer to the router to achieve better signal quality.
How to access TP-LINK BE19000 settings via the Tether App after setup?
1. Connect your smartphone to the TP-LINK BE19000’s or router’s network.
2. Launch the Tether app, select your TP-LINK BE19000, and log in.
3. View or change TP-LINK BE19000 settings as needed.
How to access TP-LINK BE19000 settings via a web browser after setup?
1. Connect your computer or smartphone to the TP-LINK BE19000’s network. If you are using a computer, unplug the Ethernet cable if any.
2. Launch a web browser, enter http://www.tplinkrepeater.net in the address bar, and log in.
3. View or change TP-LINK BE19000 settings as needed.
How to change the TP-LINK BE19000 to Access Point Mode?
Stable wireless performance and wired connection with a main router required. To change your TP-LINK BE19000 to Access Point Mode, do the following:
a. By Web: Login → Find the Mode button on top.
b. By Tether: Login to your TP-LINK BE19000 → More → Operation Mode
What are the functions of the buttons on the TP-LINK BE19000?
Three physical buttons are located on the front of the TP-LINK BE19000.
WPS Button: Press the WPS button on your router, and immediately press this button on the TP-LINK BE19000 for 1 second. The LED of the TP-LINK BE19000 should change from blinking to a solid vertical line, indicating a successful WPS connection.
Wi-Fi Button: Press and hold this button for about 1 second to turn on or off the wireless function of your TP-LINK BE19000.
LED Button: Press the LED button to turn on or off the LED of your TP-LINK BE19000.
What do the LEDs on the TP-LINK BE19000 indicate in Range Extender Mode?
| Status | Indication |
|---|---|
| Cycling | The system is starting up or firmware is being upgraded. |
| All LEDs are solid | The TP-LINK BE19000 is connected to your router’s wireless network and the TP-LINK BE19000’s Wi-Fi is on. It is in a suitable location and receives a strong signal. |
| 3/4 LEDs from bottom to top are solid | The TP-LINK BE19000 is connected to your router’s wireless network and the TP-LINK BE19000’s Wi-Fi is on. It is in a suitable location and receives a moderate signal. |
| 1/2 LEDs from bottom to top are solid | The TP-LINK BE19000 is connected to your router’s wireless network and the TP-LINK BE19000’s Wi-Fi is on. It receives a weak signal. Try relocating it closer to your router. |
| Solid Exclamation Point | The TP-LINK BE19000 is not connected to the wireless network of your router. |
| Pulsing | The TP-LINK BE19000’s Wi-Fi is off. |
| Blinking Top 10 LEDs | Establishing a WPS connection. |
| Off | The TP-LINK BE19000 is off. |
What should I do if the Tether app cannot find my TP-LINK BE19000 during setup?
Try another method by following the steps below:
1. Connect your smartphone to the TP-LINK BE19000’s network TP-Link_Extender.
2. Launch the Tether app, and select your TP-LINK BE19000.
3. Follow app instructions to complete the setup. If you are still having problems, contact our technical support.
What should I do if the LED on the TP-LINK BE19000 doesn’t turn into a solid vertical line after completing the setup via the Tether app or web browser?
You may have entered an incorrect Wi-Fi password for your main router during the configuration. Check the password and try again.
Make sure the TP-LINK BE19000 is close to your router, preferably within 16 feet, and away from large electrical appliances.
If you have enabled wireless MAC filtering, wireless access control, or access control list (ACL) on your router, disable them first, then follow any method on the front page to complete the configuration.
Try setting it up via the WPS button.
Reset the TP-LINK BE19000 and go through the configuration again.
If you are still having problems, contact our technical support.
How do I reset the TP-LINK BE19000?
With the TP-LINK BE19000 powered on, use a pin to press the Reset button for 2 seconds. The TP-LINK BE19000 will reboot.
What safety information should I know about the TP-LINK BE19000?
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use the device where wireless devices are not allowed.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Adapter shall be installed near the equipment and shall be easily accessible.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device.
Please use this product with care and operate at your own risk.
CLICK HERE TO DOWNLOAD TP-LINK BE19000 (01) PDF DOCUMENT