SPIRIT CSF-LEGP (01) PDF DOCUMENT

Please take a moment to record the following information to make any future, needed contact easy:

• Serial Number

• Date of Purchase

• Dealer / Place of Purchase

• Date of Installation

WARNING – Serious injury could occur if these safety precautions are not observed:

1. Obtain a medical exam before beginning any exercise program.

2. Stop exercising if feeling faint, dizzy or experiencing pain and consult your physician.

3. Obtain instructions before using.

4. Read and understand the owner’s manual and all warnings posted on the unit before using.

5. Keep all children (12 and under) away. Teenagers (13 and over) and disabled must be supervised.

6. Keep body and clothing free from and clear of all moving parts.

7. Use the unit only for the intended use. DO NOT modify the unit.

8. Inspect unit prior to use. DO NOT use if it appears damaged or inoperable.

9. Inspect all cables and connections prior to use. DO NOT use if any components are worn, frayed or damaged.

10. DO NOT attempt to fix a broken or jammed unit. Notify floor staff.

11. DO NOT use if guards are missing or damaged.

12. Be sure that the weight pin is completely inserted. Use only the pin provided by the manufacturer.

13. If unsure seek assistance.

14. Never pin the weights in an elevated position. DO NOT use this unit if found in this condition.

15. Seek assistance from floor staff.

16. DO NOT use dumbbells or other incremental weights, except those provided by the manufacturer.

17. Report any malfunctions, damage or repairs to the facility.

18. Replace any warning labels if damaged, worn or illegible.

19. DO NOT use this unit outdoors.

20. Carriage Max Loading Capacity: 770 lb (385 lb per side)

Please ensure that you review and adhere to the user weight restrictions of your new unit. Failure to do so may result in serious injury or damage to your unit.

Read the Owner’s Manual carefully before assembling, servicing or using the equipment.

Make sure that each unit is set up and operated on a solid level surface.

Make sure that all users are properly trained on how to use the equipment.

Make sure there is enough room for safe access and operation of the equipment.

Perform regular maintenance checks on the equipment. Also pay close attention to all areas most susceptible to wear, including (but not limited to) cables, pulleys, belts and grips.

Immediately replace worn or damaged components. If unable to immediately replace worn or damaged components then remove from service until the repair is made.

Use only Spirit Fitness supplied components to maintain/repair the equipment.

Keep a repair log of all maintenance activities.

Inspect all cables and belts and connections prior to use. DO NOT use if any components are worn, frayed or damaged.

NOTE: It is the sole responsibility of the user/owner or facility operator to ensure that regular maintenance is performed.

These safety notes are directed to you as the owner of the Strength Equipment. Please train all your users and fitness staff to follow these safety instructions.

DO:

• Do encourage each of your users to discuss their health program or fitness regimen with a healthcare professional.

• Do stop operating your Strength Equipment if you feel dizzy or faint.

• Do perform regular preventative maintenance.

• Do exercise slowly until you reach a level of comfort.

DO NOT:

• Do not let unsupervised children operate the Strength Equipment.

• Do not use without proper athletic shoes.

• Do not use in rainy weather outdoors, or in an enclosed pool environment.

• Do not drop or insert any object, hands, or feet into any opening or within the area of the product.

• Do not attempt to remove any shrouds or modify the Strength Equipment.

WARNING:

• Your Strength Equipment is designed for exercise in a commercial or consumer environment.

• Please check with your physician prior to beginning any exercise program.

• Do not push yourself to excess. Stop if you are feeling faint, dizzy, or exhausted. Use common sense during workout.

• Read the owner’s manual in its entirety before operating the Strength Equipment.

• Failure to obey this warning can result in injury or death.

• Spirit Fitness recommends that all fitness equipment be used in a supervised area, preferably in an access-controlled area.

• Use the machine only as described in the manual. Failing to follow proper instructions may result in injury.

• Do not lean against or pull on the framework or any component, whether the machine is at rest or in use.

• Do not use the machine if it is not located on a solid level surface or is improperly installed.

• Provide an adequate safety perimeter between the machine, walls and other equipment to ensure that the facility has the proper clearance for usage and training.

Live Area and Training Area

The live area shall be not less than 180cm (70.86″) greater than the training area in the directions from which the equipment is accessed. The live area must also include the area for emergency dismount.

The dimensions of the SPIRIT CSF-LEGP are approximately 63.6″ (1616 mm) in width and 84.5″ (2146.5 mm) in length.

Proper Usage

• DO NOT use any equipment in any way other than designed or intended by the manufacturer. It is imperative that SPIRIT FITNESS equipment is used properly to avoid injury.

• Injuries may result if exercising improperly or excessively. It is recommended that all individuals consult a physician prior to commencing an exercise program. If at any time during exercise you feel faint, dizzy or experience pain, STOP EXERCISING and consult your physician.

• Keep body parts (hands, feet, hair, etc.), clothing and jewelry away from moving parts to avoid injury.

• Follow instructions provided in this manual for correct foot position and basic techniques.

• The maximum carriage weight should not exceed 770 pounds.

Inspection

• DO NOT use or permit use of any equipment that is damaged and/or has worn or broken parts. For all SPIRIT FITNESS equipment use only replacement parts supplied by SPIRIT FITNESS.

• Cables and belts pose an extreme liability if used when frayed. Always replace any cable or belt at first sign of wear (consult SPIRIT FITNESS if uncertain).

Equipment Maintenance

• Preventative maintenance is the key to smooth operating equipment as well as to keep your liability to a minimum. Equipment needs to be inspected at regular intervals.

• Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so.

• DO NOT ATTEMPT TO USE OR REPAIR ANY ACCESSORY APPROVED FOR USE WITH THE SPIRIT FITNESS EQUIPMENT WHICH APPEARS TO BE DAMAGED OR WORN.

• Check all belts, pulleys and bungee cords regularly for signs of wear, and replace if needed.

• Check regularly and follow all instructions for maintenance as specified in this manual.

• Replace immediately any defective parts and do not operate unit until all repairs are complete.

• Keep children away from the equipment. Parents or others supervising children must provide close supervision of children if the equipment is used in the presence of children.

• Do not allow users to wear loose fitting clothing or jewelry while using equipment. It is also recommended to have users’ secure long hair back and up to avoid contact with moving parts.

• All bystanders must stay clear of all users, moving parts and attached accessories and components while machine is in operation.

Maximum Carriage Capacity: 770 lb

Weight: 397 lb

Overall Dimensions: 2147x1616x1272 mm

Use the following procedures to unpack your Strength Equipment:

1. Cut the straps then lift the box over the unit and unpack. Remove all parts from the shipping carton and foam inserts, and verify that all parts are included in your shipment.

2. Locate the hardware package. The hardware is separated into four steps. Remove the tools first. Remove the hardware for each step as needed to avoid confusion.

If parts are missing, or if you have any operational questions, please call your local Spirit Fitness’s Service department or the distributor who sold you the product. Have your serial number ready.

CAUTION: Damage to the Strength Equipment during assembly is not covered as part of the limited Spirit Fitness warranty. Take care not to drop or lean the Strength Equipment on its side. Carefully stand the Strength Equipment up in the normal upright position on a stable surface so it will not tip over during assembly.

Follow these steps to assemble your SPIRIT CSF-LEGP. The numbers in parentheses correspond to the item numbers in the assembly drawings.

Step 1: Attach Bottom Frame to Main Frame

Parts Needed:

• (1) bottom frame

• (2) main frame

• (49) hexagon socket button head screw M10*25 (Qty: 4)

• (63) plain washer φ20*φ10.5*2 (Qty: 4)

• (66) spring washer M10 (Qty: 4)

Procedure: Attach the bottom frame (1) to the main frame (2) using four sets of screws (49), plain washers (63), and spring washers (66).

Step 2: Attach Pedal and Barbell Tube

Parts Needed:

• (7) pedal frame

• (12) barbell tube

• (17) round rubber pad (Qty: 2)

• (53) hex socket head cap screw M8*70 (Qty: 1)

• (61) plain washer φ16*φ8.4*1.6 (Qty: 2)

• (70) nylon insert lock nut M8 (Qty: 1)

Procedure: Attach the pedal frame (7) and barbell tube (12) to the main assembly using the hex socket head cap screw (53), plain washers (61), and nylon insert lock nut (70). Attach the round rubber pads (17).

Step 3: Attach Side Barbell Stands and Bumpers

Parts Needed:

• (2) main frame

• (11) side barbell stand (Qty: 4)

• (43) bumper (Qty: 4)

• (48) hexagon socket button head screw M10*30 (Qty: 4)

• (63) plain washer φ20*φ10.5*2 (Qty: 4)

• (66) spring washer M10 (Qty: 4)

Procedure: Attach the bumpers (43) and side barbell stands (11) to the main frame (2) using four sets of screws (48), plain washers (63), and spring washers (66).

Step 4: Attach Back Cushion and Seat Pad

Parts Needed:

• (20) back cushion

• (21) seat pad

• (51) hexagon socket button head screw M8*35 (Qty: 4)

• (52) hex socket head cap screw M8*75 (Qty: 4)

• (61) plain washer φ16*φ8.4*1.6 (Qty: 8)

• (67) spring washer M8 (Qty: 8)

Procedure: Attach the back cushion (20) and seat pad (21) to the frame using the specified screws (51, 52), plain washers (61), and spring washers (67).

A regular preventative maintenance schedule ensures that the equipment works at an optimal condition. All preventive maintenance activities must be performed on a regular basis. Performing routine preventive maintenance actions can aid in providing safe, trouble-free operation of all SPIRIT equipment. SPIRIT is not responsible for performing regular inspection and maintenance actions for your machines. Instruct all personnel in equipment inspection and maintenance actions and also in accident reporting and recording.