BABY LOCK SPIRIT BLPY (01) PDF MANUAL

Improved functionality of mouse operation.

1. Press the power switch to turn on your machine. The LCD screen comes on.

2. Touch anywhere on the initial screen.

3. Press the Machine Setting Mode Key at the bottom of the display. The Settings screen appears.

4. Switch screens by using the Previous page key or Next page key to display the software version.

5. If “Version 1” shown in the screen is already 4.01 or later, it is not necessary to update your machine. If “Version 1” shown in the screen is lower than 4.01, follow the procedure to update your machine.

The following two methods are available to update your machine’s software.

1. Update procedure using USB media

2. Update procedure using a computer connection (USB Function)

Follow the procedure described in the instruction manual.

Do not turn off your machine while the machine is saving the update software to itself. If the machine’s power is turned off while saving the update software, it may result in damage to the machine.

When using USB Flash drive (USB Flash memory) to update the machine’s software, check that no data except for the update file is saved on the USB Flash drive (USB Flash memory) being used before beginning update.

When using a computer connection to update the machine’s software, check your computer’s operating system. USB functionality is only available to be used with Microsoft Windows 7/ 8.1/ 10.

1. Improved machine’s functionality for reading the pattern data from USB DVD/CD drive.

1. Version number change only / No change in functionality.

1. Improved machine’s functionality for keeping the proper position of the embroidery foot when moving the embroidery frame after cutting the thread.

2. Improved machine’s functionality for sewing reinforcement stitches when embroidering.

1. Improved machine’s functionality for sewing reinforcement stitches when embroidering.

1. Improved the thumbnails display of some embroidery characters.

1. Improved machine’s functionality for the following features or some issues.

1-1. Capability for recalling particular PES data that contains incompatible format

1-2. Embroidering frame patterns

1. Fixed the situation where the machine may not raise the presser foot when moving the carriage of the embroidery unit for rethreading the upper thread during embroidering.

1. Corrected the misspellings of the word.

1. Improved the upgrade function.

2. Fixed the situation where the machine did not initialize the thread cutter unit correctly, which may cause trouble such as failure of the thread trimming or improper thread trimming.

1. Improved the quality of reinforcement stitches when embroidering.

2. Fixed the situation where the machine reboots when loading an embroidery pattern in the original embroidery card created by ESS/ ESS-2.

1. Fixed the situation where the machine might reboot when touching the screen while playing the opening movie in the display.

1. Improved so that the machine remembers the name for removable disk when it is named by user on the PC.

2. Electric power consumption of the machine in the “Shutoff Support Mode” is reduced to 0.5W or less.

1. Fixed the situation where the machine may not recognize USB flash drive when re-inserting it to the USB port on the machine.

2. Improved the program for initializing the machine when the machine is turned on.