SHARPER IMAGE SIT50 (01) PDF MANUAL

SHARPER IMAGE SIT50 (01) PDF SUMMARY:

How do I charge the fitness band?

Connect the charging cable to a computer to charge. You will see a battery icon on the band when it is fully charged. You can also check the battery status of your band on the settings screen of the “Me by Sharper Image” app.

---

What devices are compatible with the fitness band?

The device is only compatible with: Android devices that run OS 4.3 or later, and that supports Bluetooth 4.0; Apple iPhone 4S and later, iPod Touch (5th gen.); iPad 3, 4, Mini, and Air.

---

How do I install the app?

Launch the Google Play store or iOS app store (Apple devices) on your smartphone or tablet. Search for “Me by Sharper Image” on the app store. Select “Me by Sharper Image”. Install the “Me by Sharper Image” app.

---

How do I pair the fitness band to my device?

Before launching the app, make sure your device’s Bluetooth feature is enabled, and the band is charged. When you open the app for the first time, you will be prompted to connect your device to the band. Select “PAIR NOW”. When the “pairing screen” appears, press the “mode” button of the band. When the band is connected and paired to your device, “connected” is displayed on the bottom of the home screen.

---

What does it mean when “disconnected” is shown on the home screen?

When the band is not connected or paired to a device, “disconnected” is shown. If you are not paired or connected to your band, you will see “disconnected” on the bottom of the home screen. Tapping on “disconnected” will pair and connect the band to your device.

---

What happens when the band is separated from the device?

The band will disconnect when separated from your device (over 20 ft).

---

How do I sync the band to the app?

Swipe down on the home screen to sync the band to the app and update your activity data. Make sure that the band is connected to your device when syncing. After using the band, be sure to sync it with your device within 48 hours so that you do not lose your data.

---

How long is data stored on the band?

Up to 7 days of data will be stored.

---

What are some important safety instructions?

• Do not expose your band to liquid, moisture, humidity, or rain.
• Do not drop the band.
• Do not puncture, or bend the band.
• Do not use abrasive cleaners to clean your band.
• Do not leave your band near open flames, such as cooking burners, candles, or fireplaces.
• Do not bring your band into contact with sharp objects, as this could cause scratches and damage.
• Do not insert anything into your band unless otherwise specified in the user instructions. This may damage the internal components.
• Do not attempt to repair or modify your band, as it does not contain any user-serviceable components.
• Do not attempt to replace your band’s battery, as it is built-in and not changeable.
• Use only the supplied USB cable to charge the band.
• Only charge the battery in accordance with the user instructions supplied with the band.
• Avoid charging your band in extremely high or low temperatures.
• Do not charge the band in damp areas because this could result in electric shock.
• Do not clean your band while it is being charged. Always unplug the charger before cleaning the band.
• Do not dispose of your band in a fire. The battery could explode, causing injury or death.

---

What should I do to reduce the risk of fire or electrical shock?

Do not expose the product to rain or moisture.

---

What are some measures I can take to correct harmful interference?

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

---

What are the FCC rules for this device?

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

---

What type of battery does this device use?

This device contains a Lithium-ion battery.

---

How should I dispose of the battery?

The battery must be recycled or disposed of properly. Contact your local waste management office for information on battery recycling or disposal.

---

What does the warranty cover?

The warranty covers manufacturer’s defects in materials and workmanship encountered in normal consumer use.

---

What does the warranty NOT cover?

The warranty does not cover damage caused by improper use, accidents, modifications, or exposure to extreme temperatures. The warranty also does not cover images “burned” into the screen. Additionally, the warranty does not cover products sold “AS IS,” with all faults, sold as reconditioned, refurbished, or remanufactured, or consumables (e.g., fuses, batteries, bulbs, etc.). The warranty is void if the serial number has been altered or removed from the product.

---

How can I obtain warranty service?

• Call the Customer Support number, or go to the website to receive an SRO number.
• Provide proof of the date of purchase, within the warranty period (bill of sale).
• Prepay all shipping costs to the authorized service center, and insure your shipment.
• Include a return shipping address, contact number, and the defective unit within the package.
• Describe the defect or reason you are returning the product.

---

How do I change my daily step goal?

On the menu screen, you can adjust your goal. Your daily goal is set to 10,000 steps by default. You can change the goal by using the arrows. You can only adjust the first two digits.

---

How do I update the band’s software?

1. To check for updates, tap “band software” in “settings”.
2. If there is an update available, your band will begin updating automatically.

---

How do I pair or unpair my band?

Pair or unpair your band by tapping on band status.