FREE ENGLISH SCUBAPRO NOVA 250 (01) PDF USER GUIDE
FREE ENGLISH SCUBAPRO NOVA 250 (01) PDF USER MANUAL
FREE ENGLISH SCUBAPRO NOVA 250 (01) PDF OWNER GUIDE
FREE ENGLISH SCUBAPRO NOVA 250 (01) PDF OWNER MANUAL
FREE ENGLISH SCUBAPRO NOVA 250 (01) PDF REFERENCE GUIDE
FREE ENGLISH SCUBAPRO NOVA 250 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH SCUBAPRO NOVA 250 (01) PDF REFERENCE MANUAL
FREE ENGLISH SCUBAPRO NOVA 250 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH SCUBAPRO NOVA 250 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD SCUBAPRO NOVA 250 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the technical specifications of the Nova 250 dive light?
| Specification | Value |
|---|---|
| Light source | 1 x CREE XP-G3 LED |
| Color temperature | 4500° K |
| Rated output | up to 250 Lumens * |
| Rated Lux | Up to 3100 lux at 1m/3feet distance * |
| Battery cell type | CR 123 or RCR 123A |
| Number of cells | 1 |
| Run time | 1 hour at 100% |
| Diameter | 25 mm / 1.0 inches |
| Length | 100 mm / 3.9 inches |
| Weight | 52 grams / 1.8 ounces |
| Waterproof depth | 100 meters / 330 feet ** |
| Approx. lifetime of bulb | 50,000 hours |
* Luminous flux (lumens) / Lux output are measured when switching on with a fully charged accumulator / new set of fresh alkaline batteries. The measures are average values and may vary +/- 15% depending on the type of chip and batteries used.
How to prevent damage to O-rings when handling the casing?
Make sure to not over tighten the casing as this could result in premature wear and/or damage to the O-rings.
Should I use tools to tighten the casing?
Never use a tool of any kind to tighten the case.
How do I operate the SCUBAPRO Nova 250 dive light?
To turn ON the SCUBAPRO Nova 250 full press the button at the rear of the light and the light turns on.
To switch between 100%, 25% and STROBE mode just half press the button.
To turn OFF the Nova 250 full press the button again and the light turns off.
What is a warning regarding looking directly into the light?
Do not look directly into the light, or direct the light into the eyes of others.
Can I alter or modify the dive light?
Do not alter or modify the dive light. If modification causes water entry or other malfunctions, the warranty will be void.
What is the function of the overpressure valve in the dive light?
The light is fitted with an overpressure valve for your safety.
In case the battery produces gas leading to a high internal pressure of the light, the valve will open. This could cause water to enter the light.
How should I store the dive light for long periods?
If the dive light is not to be used for a long period of time, remove batteries to avoid accidental leakage.
What is the proper maintenance for the dive light’s O-rings?
Frequent use of the dive light may cause O-rings to dry out. To avoid leakage, clean O-ring groove with a cotton swab and regularly apply lubricant to O-rings to help prevent dry cracking.
Please rinse the Nova 250 with fresh water before storing.
How should I dispose of the dive light and its batteries?
Dispose of this product only at a specific collection point for electrical refuse.
Batteries do not belong in household waste!
Please dispose of batteries and/or the dive light in appropriate collection facilities.
CLICK HERE TO DOWNLOAD SCUBAPRO NOVA 250 (01) PDF MANUAL