Free English RUSSOUND OB-SOLO (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD RUSSOUND OB-SOLO (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the all-weather design features of the RUSSOUND OB-SOLO?
The RUSSOUND OB-SOLO is designed to withstand harsh outdoor environments, including rain, snow, saltwater, and UV rays. Key design features include:
Gold-plated binding posts, solid brass and stainless steel hardware, and a rust-proof aluminum grille.
A resonance-free, mineral filled composite cabinet that can withstand extreme temperature fluctuations from -50F to 200F.
How should I connect the RUSSOUND OB-SOLO speakers to an amplifier?
The RUSSOUND OB-SOLO uses gold-plated binding posts that are color-coded for polarity: red is positive and black is negative. These binding posts are designed to accept either bare wire or Banana Plugs.
Step 1. Turn off the amplifier prior to making connections to avoid possible damage from accidental speaker wire shorting.
Step 2. Ensure all connections are tight and that there is no shorting of wires from one terminal to another.
Step 3. Check that the polarity is correct on both speakers. If the polarity is incorrect, bass response and imaging will suffer from cancellation.
How do I specifically attach wires to the RUSSOUND OB-SOLO binding posts?
To connect the wires to the red and black speaker terminals on the RUSSOUND OB-SOLO, follow these steps:
Step 1. Press down on the gold plated binding post.
Step 2. Insert the wire into the hole.
Step 3. Release the binding post.
Step 4. Ensure that no stray strands of wire have detached and are touching the other main wire.
What mounting precautions should I take with the RUSSOUND OB-SOLO?
Do NOT mount the RUSSOUND OB-SOLO speaker with the front facing up. This orientation can allow water to enter the cabinet directly through the port opening.
How do I mount the RUSSOUND OB-SOLO using the included standard bracket?
The RUSSOUND OB-SOLO comes with mounting brackets that allow for either vertical or horizontal mounting. Follow these procedures for installation:
Step 1. Use a level when mounting the brackets to ensure correct positioning.
Step 2. Confirm that the mounting surface and fasteners can safely support the weight of the speaker.
Step 3. Connect the speaker wiring, ensuring correct polarity.
Step 4. Secure the speaker to the bracket using the supplied knobs.
Step 5. Adjust the speaker for optimum sound quality.
Step 6. Hand-tighten the knobs only. Do not use power tools, as they can damage the threaded inserts and cause them to break free from the cabinet.
Can I use aftermarket brackets to mount the RUSSOUND OB-SOLO?
Yes, the RUSSOUND OB-SOLO features dual 1/4-20 brass inserts for use with various aftermarket mounting systems. When using these, follow the specific directions provided with the aftermarket product.
What are the technical specifications for the RUSSOUND OB-SOLO series?
The following table details the specifications for the different models in the RUSSOUND OB-SOLO series:
| Feature | OB-4.1 | OB-5.1 | OB-6.1 | OB-Solo |
|---|---|---|---|---|
| Woofer | 4 inch Long Throw | 5 inch Long Throw | 6 inch Long Throw | 5 inch Long Throw |
| Tweeter | 1/2 inch Polyamide | 3/4 inch Mylar/Titanium | 1 inch Mylar/Titanium | Dual 3/4 inch Mylar/Titanium |
| Amplifier Power | 10 to 75 watts | 10 to 100 watts | 10 to 150 watts | 10 to 100 watts |
| Frequency Response | 80 to 20kHz | 65 to 20kHz | 55 to 20kHz | 65 to 20kHz |
| Sensitivity | 87dB | 89dB | 90dB | 89dB |
| Nominal Impedance | 8 Ohms | 8 Ohms | 8 Ohms | 8 Ohms |
| Dimensions (HxWxD) | 8 5/8 x 6 3/4 x 5 7/8 inches | 9 5/8 x 7 1/4 x 6 1/2 inches | 11 7/8 x 8 1/2 x 7 1/2 inches | 11 7/8 x 8 1/2 x 7 1/2 inches |
| Weight Each | 4 lb 9 oz | 5 lbs 1 oz | 7 lbs 3 oz | 6 lbs 8.5 oz |
CLICK HERE TO DOWNLOAD RUSSOUND OB-SOLO (01) PDF DOCUMENT