Free English RUSSOUND OB-6.1 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD RUSSOUND OB-6.1 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What environmental conditions can the RUSSOUND OB-6.1 withstand?
The RUSSOUND OB-6.1 features an all weather design suitable for harsh environments. It is built to withstand rain, snow, saltwater, and the sun’s harmful UV rays. The resonance-free, mineral filled composite cabinet can handle extreme temperature fluctuations ranging from -50F to 200F.
How do I connect the speaker wires to the RUSSOUND OB-6.1?
The RUSSOUND OB-6.1 features gold-plated binding posts that are color-coded for polarity, where red is positive and black is negative. To connect your speakers, follow these steps:
Step 1. Turn off the amplifier before making any connections to prevent damage from accidental speaker wire shorting.
Step 2. Prepare the wires or use “Banana Plugs” as the binding posts are designed to accept both.
Step 3. Ensure that all connections are tight and that there is no shorting of wires from one terminal to another.
Step 4. Verify that the polarity is correct on both speakers, as incorrect polarity will cause the bass response and imaging to suffer from cancellation.
What are the mounting requirements for the RUSSOUND OB-6.1?
When mounting the RUSSOUND OB-6.1, it is critical to never mount the speaker with the front facing up. This orientation allows water to enter the cabinet directly through the port opening. You should also ensure the mounting surface and fasteners are strong enough to support the speaker safely.
How do I install the RUSSOUND OB-6.1 using the standard included bracket?
The RUSSOUND OB-6.1 includes brackets that allow for either vertical or horizontal mounting. Follow these instructions for installation:
Step 1. Mount the brackets using a level to ensure correct positioning.
Step 2. Connect the speaker wiring to the terminals while ensuring correct polarity.
Step 3. Secure the speaker to the bracket using the supplied knobs.
Step 4. Adjust the speaker to achieve optimum sound.
Step 5. Hand-tighten the knobs only. Do not use power tools, as they can cause the threaded inserts to break free from the cabinet.
Can I use an aftermarket mounting system with the RUSSOUND OB-6.1?
Yes, the RUSSOUND OB-6.1 is equipped with dual 1/4-20 brass inserts. These are designed for use with various aftermarket mounting systems. You should follow the specific directions included with your chosen aftermarket product for installation.
What are the technical specifications for the RUSSOUND OB-6.1?
The technical specifications for the RUSSOUND OB-6.1 are as follows:
| Woofer | 6″ Long Throw |
| Tweeter | 1″ Mylar/Titanium |
| Amplifier Power | 10 – 150 watts |
| Frequency Response | 55 – 20kHz |
| Sensitivity | 90dB |
| Nominal Impedance | 8 Ohms |
| Dimensions | 11 7/8″H x 8 1/2″W x 7 1/2″D |
| Weight Each | 7 lbs 3 oz |
CLICK HERE TO DOWNLOAD RUSSOUND OB-6.1 (01) PDF DOCUMENT