REXING A1 (01) PDF Document

The REXING A1 Action Camera package includes the following items:

01. A1 Action Camera

02. Remote Control

03. Adhesive Mount

04. Mounting Buckle with Thumb Screw

05. Pivot Arm with Thumb Screw

06. USB to Micro USB Cable

07. Quick Release Plate

08. Charger

09. User Manual

The indicator lights on your REXING A1 provide information about battery status, charging, recording, and Wi-Fi connectivity.

Green Indicator (Battery Level):

– Quick Flashing: Battery level is lower than 30%.

– Slow Flashing: Battery level is between 30% and 49%.

– ON: Battery level is over 50%.

Red Indicator (Charging Status):

– OFF: The camera is fully charged.

– ON: The camera is currently charging.

White Indicator (Operating Status):

– Slow Flashing: The camera is under duplex or simplex recording.

– Quick Flashing Twice: A remote shooting or lock command has been received.

– Quick Flashing for 5 Times: The memory card is being formatted.

– ON: The camera is in standby mode.

Blue Indicator (Wi-Fi Status):

– OFF: Wi-Fi is turned off.

– Slow Flashing: The camera is waiting to be connected to a device via Wi-Fi.

– ON: The camera is connected via Wi-Fi.

Power Key:

– Press: Start or stop video recording.

– Press & Hold: Turn the device on or off.

Wi-Fi Key:

– Press: Turn on Wi-Fi.

– Press & Hold: Turn off Wi-Fi.

Vibrating once:

1. The device is turning on. Release the key once it vibrates to turn on the camera.

2. A valid operation was performed, such as starting/stopping video recording or Wi-Fi (excludes shutdown and formatting).

3. A remote operation was performed.

Vibrating for 5 times:

1. The memory card has been formatted.

2. There is a device error.

Long vibration for 2 times:

The device is powering off (including manual, automatic, and low battery shutdown).

1. Take out the device and the Micro USB cable.

2. Connect the charger and computer with the USB cable to charge the recorder.

3. The Red Indicator will be ON while charging and will turn OFF after charging is complete.

4. If the battery runs out of power during use, the device will turn off automatically.

1. Open the waterproof cover cap from the Micro SD card slot.

2. Insert a high-speed Micro SD card (Class 10 or above) according to the direction indicated on the slot.

3. Close the card slot cover cap.

4. DO NOT insert or remove the Micro SD card when the device is turned on.

1. Press the Power Key to turn on the device (it will vibrate once).

2. Once ON, the recorder automatically enters video mode and starts recording (the white indicator will flash). Press the Power Key again to stop recording (the camera will vibrate once).

3. Press the Power Key again to turn the device off (the camera will vibrate twice).

To format the memory card, press the Power Key continuously for 5 times. The white indicator will flash 3 times, and the camera will vibrate 5 times, indicating the card is being formatted.

The REXING A1 Action Camera features a Power Saving Mode. Even if the camera is ON and recording, it will turn itself off if no motion is detected for 5 minutes.

1. The action camera automatically pairs with its remote control after starting.

2. To lock a video file, press the Lock Button on the remote. Its red indicator light will flash once, and the camera’s white indicator will flash twice. The video file currently being recorded will be locked and saved.

3. To take a picture, press the Camera Key on the remote. Its green light will flash once, and the camera’s white indicator will flash twice, indicating a picture has been taken.

4. The remote control uses one CR2032 battery.

Connecting to the App:

1. Download the RexingConnect APP via the Appstore/Playstore to your cell phone.

2. On your phone, search for the Wi-Fi network named REXING_xxxxxxxxxxxx. The Wi-Fi password is: 12345678.

3. After a successful connection, return to the APP homepage. You will be able to preview videos and images in real time.

Operating via the App:

1. Modes can be changed via the app keys: Playback, Record, Camera, and Change View.

2. Click the lower right settings icon to set up the action camera. You can adjust Wi-Fi Password, Audio Recording, Date Stamp, Loop Recording, G-sensor sensitivity, Video Resolution, as well as format the memory card and reset to default settings.

Automatic Wi-Fi Activation:

After the recorder is turned on, Wi-Fi will be activated automatically, and the blue indicator will flash. If a connection is not established with a cellphone within 1 minute, Wi-Fi will turn off. Upon successful connection, the blue Wi-Fi indicator light turns on. Note: If the Wi-Fi Key is held down for 5 seconds, Wi-Fi will not turn on automatically at the next booting.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.