FREE ENGLISH ONE FOR ALL URC 1919 (01) PDF DOCUMENT.
FREE ENGLISH ONE FOR ALL URC 1919 (01) PDF USER GUIDE.
FREE ENGLISH ONE FOR ALL URC 1919 (01) PDF USER MANUAL.
FREE ENGLISH ONE FOR ALL URC 1919 (01) PDF OWNER GUIDE.
FREE ENGLISH ONE FOR ALL URC 1919 (01) PDF OWNER MANUAL.
FREE ENGLISH ONE FOR ALL URC 1919 (01) PDF REFERENCE GUIDE.
FREE ENGLISH ONE FOR ALL URC 1919 (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH ONE FOR ALL URC 1919 (01) PDF REFERENCE MANUAL.
FREE ENGLISH ONE FOR ALL URC 1919 (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH ONE FOR ALL URC 1919 (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD ONE FOR ALL URC 1919 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I install the batteries?
1. Open the battery door.
2. Insert 2 AAA batteries.
3. FINISH
What are the functions of the buttons on the remote?
| Key Number | Function Description |
|---|---|
| 1 | LINK – Link, HDMI Control |
| 2 | SWAP – Last Channel, Previous Program |
| 3 | UPDATE – Text Update |
| 4 | EXPAND – Text Expand |
| 5 | NET – Internet |
| 6 | ROOT – Root Folder |
| 7 | TITLE – Title |
| 8 | QUICK – Quick Menu |
| 9 | SOURCE – Source, Input Select |
| 10 | EPG – TV Guide |
| 11 | REVEAL – Text Reveal |
| 12 | HOLD – Text Hold |
| 13 | MEDIA – Media Browser |
How do I set up the remote for my television?
The majority of newer Toshiba TVs should work directly. After putting batteries in, just test some of the keys, and if they work, your remote is ready. If not, follow the next steps:
1. Make sure your TV is on (not on standby).
2. Hold down RED + BLUE until the LED behind the Power Key blinks twice.
3. Point towards the TV and hold down the POWER KEY until the TV turns off.
4. The remote will send a different Power signal every 3 seconds. As soon as the TV turns off, let go of the POWER KEY.
5. The LED will blink twice. Now test the rest of the keys on the remote. If they work as your original did, your remote is ready to use.
What should I do if some keys are not working as expected?
If you find some keys do not work as expected (or not at all), proceed to the next step.
1. Make sure your TV is on (not on standby).
2. Hold down RED + BLUE until the LED behind the Power Key blinks twice.
3. Point towards the TV and hold one of the keys that is not working correctly (for example MENU).
4. The remote will send a signal every 3 seconds.
5. When the correct function is shown on the screen (in this case the MENU), let go of the key.
6. The LED will blink twice – your remote is ready to use.
How can I teach a new function to my remote?
Your One For All remote can learn any function from your original (working) remote.
1. Place the original remote facing the One For All remote on a flat surface.
2. To learn: Hold down GREEN + YELLOW until the LED blinks twice.
3. Press 975. The LED will blink twice.
4. Press the key on the One For All remote you want to learn on, for Example: the VOL + key.
5. Press the key on the Original remote you want to learn, for Example: the VOL + key of your AUDIO Device.
6. The remote’s LED will blink. Two blinks: ok. Repeat from step 4 for any more keys to learn. Long blink: try again from step 4.
7. When you have learned all the keys you need, press and hold the OK KEY for 3 seconds. The LED will blink twice.
How do I delete a learned function?
1. Hold down GREEN + YELLOW until the LED blinks twice.
2. Press 976.
3. Press the key to reset twice.
The LED flashes twice and the key will get back the original function.
CLICK HERE TO DOWNLOAD ONE FOR ALL URC 1919 (01) PDF DOCUMENT