Free English TOTAL CONTROL URC-2910 (01) PDF Document. Free English TOTAL CONTROL URC-2910 (01) PDF User Guide. Free English TOTAL CONTROL URC-2910 (01) PDF User Manual. Free English TOTAL CONTROL URC-2910 (01) PDF Owner Guide. Free English TOTAL CONTROL URC-2910 (01) PDF Owner Manual. Free English TOTAL CONTROL URC-2910 (01) PDF Reference Guide. Free English TOTAL CONTROL URC-2910 (01) PDF Instruction Guide. Free English TOTAL CONTROL URC-2910 (01) PDF Reference Manual. Free English TOTAL CONTROL URC-2910 (01) PDF Instruction Manual. Free English TOTAL CONTROL URC-2910 (01) PDF Operating Instructions.
CLICK HERE TO DOWNLOAD TOTAL CONTROL URC-2910 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What type of batteries does the TOTAL CONTROL URC-2910 remote require?
Your TOTAL CONTROL URC-2910 universal remote requires 2 new AAA alkaline batteries.
How do I set up the TOTAL CONTROL URC-2910 using the Direct Code Set Up method?
To set up the TOTAL CONTROL URC-2910 for your television using a direct code, follow these steps:
1. Find the four-digit code for your device in the Code list provided in the manual. Codes are listed by device type and brand name. The most popular code is listed first. Make sure your device is switched on (not on standby).
2. Press and hold down the SETUP key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice).
3. Enter your four-digit device code using the number keys. The red LED will blink twice.
4. Now, aim the TOTAL CONTROL URC-2910 at your device and press POWER. If your device switches off, the remote is ready to operate your device.
What should I do if my device does not respond after entering a code for my TOTAL CONTROL URC-2910?
Some codes can be quite similar. If your device does not respond or is not functioning properly with one of the codes, try another code listed under your brand.
If your device does NOT switch off after entering a code and pressing POWER, please repeat the setup steps trying the next code listed for your brand.
How do I search for my device code if it’s not listed or the listed codes don’t work with the TOTAL CONTROL URC-2910?
If your device does not respond after trying all the codes listed for your brand, or if your brand is not listed at all, you can use the Search Method. This method scans through all the codes in the remote’s memory.
To search for your TV code:
1. Switch your television on (not on standby) and aim your TOTAL CONTROL URC-2910 at your TV.
2. Press and hold down the SETUP key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice).
3. Press 9 9 1. The red LED will blink twice.
4. Next, press POWER.
5. Aim the TOTAL CONTROL URC-2910 at your television. Now press CH+ over and over, until your television switches off. Every time you press the CH+ key, the remote will send out a POWER signal from the next code in its memory. You may have to press this key many times (up to 150 times), so please be patient.
6. As soon as your television switches off, press the SETUP key to store the code.
How will I know when the batteries are low in my TOTAL CONTROL URC-2910 remote?
The TOTAL CONTROL URC-2910 will indicate a low battery level by having the red LED light up 5 times after a key is pressed.
My TV turned off during setup with the TOTAL CONTROL URC-2910, but now it won’t turn on with the POWER key. What should I do?
Some TVs do not switch on when pressing the POWER key. Please try pressing a “number” key or the “TV-text off” key to switch your TV back on.
What is the function of the AV button on the TOTAL CONTROL URC-2910 remote?
When using the TOTAL CONTROL URC-2910 with a TV, the AV button functions as the AV / C / P input selection key.
CLICK HERE TO DOWNLOAD TOTAL CONTROL URC-2910 (01) PDF DOCUMENT