FREE ENGLISH OMEGA 1000 (01) PDF USER GUIDE
FREE ENGLISH OMEGA 1000 (01) PDF USER MANUAL
FREE ENGLISH OMEGA 1000 (01) PDF OWNER GUIDE
FREE ENGLISH OMEGA 1000 (01) PDF OWNER MANUAL
FREE ENGLISH OMEGA 1000 (01) PDF REFERENCE GUIDE
FREE ENGLISH OMEGA 1000 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH OMEGA 1000 (01) PDF REFERENCE MANUAL
FREE ENGLISH OMEGA 1000 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH OMEGA 1000 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD OMEGA 1000 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What important safeguards should be followed when using the Omega Juicer?
When using electrical appliances, basic safety precautions should always be followed including the following:
• Read all instructions.
• To protect against risk of electrical shock, do not put the motor base in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
• Avoid contact with moving parts.
• DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or electrical adjustment.
• The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
• DO NOT use outdoors.
• DO NOT let cord hang over edge of table or counter.
• Always make sure juicer cover is clamped securely in place before motor is turned on.
• Be sure to turn switch to off position after each use of your juicer.
• DO NOT put your fingers or other objects into the juicer opening while it is in operation. If food becomes lodged in the opening, use plunger or another piece of fruit to push it down. When this method is not possible, turn the motor off and disassemble juicer to remove the remaining food.
• The red button on the bottom of the machine is a thermal protection device. Should the juicer overheat for any reason this switch will cut off the electrical current and the machine will stop, thus saving it from possible damage or fire. To reset, simply push the red button and the juicer will again function normally.
WARNING: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
SAVE THESE INSTRUCTIONS.
What should I do if the Omega Juicer malfunctions, or is dropped or damaged?
DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or electrical adjustment.
Can I use attachments not recommended or sold by the manufacturer with the Omega Juicer?
The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
Can the Omega Juicer be used outdoors?
DO NOT use outdoors.
What precautions should be taken regarding the power cord?
DO NOT let cord hang over edge of table or counter.
What should be ensured before turning the motor on?
Always make sure juicer cover is clamped securely in place before motor is turned on.
What should be done after each use of the juicer?
Be sure to turn switch to off position after each use of your juicer.
What should I do if food becomes lodged in the juicer opening while it is in operation?
DO NOT put your fingers or other objects into the juicer opening while it is in operation. If food becomes lodged in the opening, use plunger or another piece of fruit to push it down. When this method is not possible, turn the motor off and disassemble juicer to remove the remaining food.
What is the purpose of the red button on the bottom of the Omega Juicer and how do I use it if the juicer overheats?
The red button on the bottom of the machine is a thermal protection device. Should the juicer overheat for any reason this switch will cut off the electrical current and the machine will stop, thus saving it from possible damage or fire. To reset, simply push the red button and the juicer will again function normally.
What type of plug does the Omega Juicer have and how should it be handled?
WARNING: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
What are the basic components of the Omega Juicer in proper assembly order?
The basic parts to the Omega Juicer in proper assembly order are:
PLUNGER
COVER
CLUTCH NUT
BLADE
BASKET
BOWL
What is the Omega Citrus Attachment?
The Omega Citrus Attachment converts your Omega Juice Extractor into a professional citrus squeezer. This optional attachment is available from your local dealer.
How do I assemble the Omega Juicer?
NOTE: For best results, go through the assembly procedures, carefully noting all cautionary points and hints, which are included for your understanding and benefit.
STEP 1 Place bowl on motor base housing with spout facing you and in the middle of the two raised projections.
STEP 2 Place strainer basket inside bowl, making certain that it rests flat on platform center hex nut.
STEP 3 Insert cutter blade inside strainer basket with teeth up centering it over hex nut.
STEP 4 Tighten clutch nut finger tight.
STEP 5 Insert optional filter liner into strainer basket.
STEP 6 Place cover on bowl with feeder chute opening to rear.
STEP 7 Place tabs of latch arms over cover and secure.
STEP 8 Insert plunger in cover opening.
How do I disassemble the Omega Juicer?
STEP 1 Remove plunger from cover opening.
STEP 2 Release side latch arms by inserting finger into side opening at bottom of the motor base and pulling upward.
STEP 3 Remove cover.
STEP 4 Unscrew clutch nut by turning counter-clockwise.
STEP 5 Lift out cutter blade from inside strainer basket.
STEP 6 Remove strainer basket.
STEP 7 Remove bowl.
What are some general helpful hints for using the Omega Juicer?
NOTE: For best results, go through the operating procedures, carefully noting all cautionary points and hints, which are included for your understanding and benefit.
• Make sure the machine is running at full speed before beginning to juice.
• Do not force feed the juicer. For most fruits and vegetables, a slow, steady push down the chute will work best. If the juicer begins to vibrate, a slightly harder push should bring it back into balance.
• There is no need to cut a fruit or vegetable into sections that will fit whole into the feeder chute. If it must be cut, cut only into large pieces that easily fit down the feeder chute.
• When making a drink that uses a combination of more than one fruit or vegetable, we suggest alternating the various fruits or vegetables when placing them in the machine. For example: Carrot Apple Juice – place one or two pieces of carrot in feeder chute, then a piece or two of apple. Keep alternating in this manner.
• When juicing leafy greens, we suggest that you twist and roll the green into a ball the size of a golf ball. Always place the greens into the juicer first, followed by crispier vegetables such as carrots, celery, etc. The juice from these vegetables will force additional juice from the greens.
• When juicing very soft fruits and vegetables, such as tomatoes, grapes and peaches, we suggest that you do not use the filters! Feed the machine slowly, pausing between placing each fruit or vegetable into the feeder chute. This will allow the juicer additional time to extract juice through the strainer basket. It is also very helpful to alternate with firmer fruits and vegetables. We suggest using seedless grapes and removing the peels from tomatoes and peaches. Due to the softness of these fruits and vegetables, some vibration may occur.
• Allow the Omega Juicer to run for one or two minutes after turning off the Juicer to allow all juice to be extracted from the pulp. Once the juicer is turned off, it is normal for the juicer to continue to spin for a minute or two due to the precision balancing of the Omega Juicer.
• SELECTING FRUITS AND VEGETABLES. It is very important that you select fruits and vegetables that are very fresh – firm, crisp and juicy!
• CLEANING THE FRUITS AND VEGETABLES. Before you begin juicing, thoroughly wash all dirt and sprays from the fruits and vegetables as many of the valuable food elements are under the surface near the skin. HINT: The only exceptions are cucumbers, pineapples, oranges and grapefruit. These should be peeled.
How should I feed fruits and vegetables into the Omega Juicer?
Do not force feed the juicer. For most fruits and vegetables, a slow, steady push down the chute will work best. If the juicer begins to vibrate, a slightly harder push should bring it back into balance.
Do I need to cut fruits or vegetables before juicing with the Omega Juicer?
There is no need to cut a fruit or vegetable into sections that will fit whole into the feeder chute. If it must be cut, cut only into large pieces that easily fit down the feeder chute.
How should I juice a combination of different fruits or vegetables with the Omega Juicer?
When making a drink that uses a combination of more than one fruit or vegetable, we suggest alternating the various fruits or vegetables when placing them in the machine. For example: Carrot Apple Juice – place one or two pieces of carrot in feeder chute, then a piece or two of apple. Keep alternating in this manner.
How should I juice leafy greens with the Omega Juicer?
When juicing leafy greens, we suggest that you twist and roll the green into a ball the size of a golf ball. Always place the greens into the juicer first, followed by crispier vegetables such as carrots, celery, etc. The juice from these vegetables will force additional juice from the greens.
How should I juice very soft fruits and vegetables (like tomatoes, grapes, peaches) with the Omega Juicer?
When juicing very soft fruits and vegetables, such as tomatoes, grapes and peaches, we suggest that you do not use the filters! Feed the machine slowly, pausing between placing each fruit or vegetable into the feeder chute. This will allow the juicer additional time to extract juice through the strainer basket. It is also very helpful to alternate with firmer fruits and vegetables. We suggest using seedless grapes and removing the peels from tomatoes and peaches. Due to the softness of these fruits and vegetables, some vibration may occur.
What should I do after turning off the Omega Juicer to ensure all juice is extracted?
Allow the Omega Juicer to run for one or two minutes after turning off the Juicer to allow all juice to be extracted from the pulp. Once the juicer is turned off, it is normal for the juicer to continue to spin for a minute or two due to the precision balancing of the Omega Juicer.
What kind of fruits and vegetables are best for juicing with the Omega Juicer?
It is very important that you select fruits and vegetables that are very fresh – firm, crisp and juicy!
How should I prepare fruits and vegetables before juicing?
Before you begin juicing, thoroughly wash all dirt and sprays from the fruits and vegetables as many of the valuable food elements are under the surface near the skin.
Which fruits and vegetables should be peeled before juicing?
The only exceptions for peeling are cucumbers, pineapples, oranges and grapefruit. These should be peeled.
How do I clean the Omega Juicer parts after use?
NOTE: Cleaning is done after the Omega Juicer is turned off and disassembled.
STEP 1 Follow disassembling instructions.
STEP 2 Wash parts with cool or cold water. No detergent required, but mild detergent may be used if desired. Bowl, plunger, cover and clutch nut require only light rinsing.
STEP 3 Wash cutter blade under running water. Stiff brush may be used to loosen any food residue.
STEP 4 If desired, all stainless steel parts may be cleaned in the dishwasher. Never place top and plunger in dishwasher.
STEP 5 To remove pulp from the strainer basket, simply “scoop” out by hand or with a spoon. To remove any remaining pulp, rotate the strainer basket under running water. Any remaining particles inside the strainer basket can be removed with a damp towel or sponge. HINT: Before juicing, an Omega Juicer filter liner can be inserted inside the strainer basket, which greatly facilitates in removal of the pulp. (The optional filters are available from your local dealer).
STEP 6 Towel dry all parts before assembling again.
STEP 7 After repeated use, mineral stains may begin to appear on the juicer parts that come in contact with juice. Immerse all removable parts and completely submerge in water overnight with a solution of eight tablespoons of Cascade or similar dishwasher detergent per gallon of water. REMEMBER: Don’t immerse the motor base housing.
STEP 8 Your Omega Juicer never needs lubrication of any kind.
How do I remove pulp from the strainer basket?
To remove pulp from the strainer basket, simply “scoop” out by hand or with a spoon. To remove any remaining pulp, rotate the strainer basket under running water. Any remaining particles inside the strainer basket can be removed with a damp towel or sponge.
Can an Omega Juicer filter liner be used?
HINT: Before juicing, an Omega Juicer filter liner can be inserted inside the strainer basket, which greatly facilitates in removal of the pulp. (The optional filters are available from your local dealer).
What should I do if mineral stains appear on the juicer parts after repeated use?
After repeated use, mineral stains may begin to appear on the juicer parts that come in contact with juice. Immerse all removable parts and completely submerge in water overnight with a solution of eight tablespoons of Cascade or similar dishwasher detergent per gallon of water. REMEMBER: Don’t immerse the motor base housing.
Does the Omega Juicer require lubrication?
Your Omega Juicer never needs lubrication of any kind.
What should I do if my Omega Juicer stops running or does not start when I turn the machine on?
SPECIAL NOTE: Should your Omega Juicer stop running or not start when you turn the machine on, it is most likely due to the fact that the electrical overload switch has been tripped. This red button is located on the bottom of the juicer. Simply push the button to reset the machine and the machine should now function normally.
What are the suggested proportions for juice recipes made with the Omega Juicer?
NOTE: Proportions of juices are usually in sixteen ounce totals. If you only desire eight ounces, then just divide by two.
What can the pulp from the Omega Juicer be used for?
With the Omega Juicer, nothing is wasted. It may be used for flavoring in soups, breads, cakes and salads. Also use the pulp as compost for gardens and plants.
CLICK HERE TO DOWNLOAD OMEGA 1000 (01) PDF MANUAL