NOISE AIR BUDS 6 (01) PDF Document

The package for the NOISE AIR BUDS 6 contains the following items:

• Noise Air Buds 6 x 1

• Charging Cable x 1

• Charging Case x 1

• Ear-tips (Small x 1 pair, Large x 1 pair)

• User manual x 1

• Thank you card x 1

The specifications for the NOISE AIR BUDS 6 earbuds are as follows:

• Earbud weight: 4.1g (each)

• Speaker driver size: 12.4mm

• Supported profiles: A2DP/AVRCP/HFP/SPP/AVDTP

• Bluetooth version: 5.3

• Earbud charging time: Up to 60 minutes

• Working voltage: 5V

• Standby time: Up to 500 hours

• Playtime without ANC: Up to 7 hours at 60% volume

• Playtime with ANC: Up to 5.5 hours at 60% volume

• Bluetooth range: 10m

• Waterproof rating: IPX5

• Working temperature: 0-45

The specifications for the NOISE AIR BUDS 6 charging case are as follows:

• Charging case weight: 39.9g

• Charging port: Type-C

• The number of earbud charges from the case: 6.5 times

• Case charging time: Up to 90 minutes

• Total playtime with charging case (without ANC): Up to 50 hours

• Total playtime with charging case (with ANC): Up to 40 hours

Power On: The NOISE AIR BUDS 6 earbuds will automatically turn on when you open the charging case.

Power Off: The earbuds will automatically turn off once placed inside the charging case with the lid closed.

To pair your NOISE AIR BUDS 6 with a device, follow these steps:

1. Open the charging case and long press the charging case button for 5 seconds.

2. On your device, select ‘Add Device’ from the Bluetooth menu and select Noise Air Buds 6 from the list of devices.

3. Your Noise Air Buds 6 are now paired and ready to use.

Note: Your NOISE AIR BUDS 6 will automatically connect to the last paired device as soon as you take them out of the charging case.

Follow these steps to reset your NOISE AIR BUDS 6:

1. Make sure your earbuds are fully charged.

2. Delete or remove Noise Air Buds 6 from the list of paired devices in your phone’s Bluetooth menu.

3. Insert both earbuds into the charging case, keep the lid open, and long press the charging case button for 10 seconds.

4. The white LED on the charging case will start blinking to indicate that the earbuds have been reset.

Charging the Earbuds:

Place both earbuds inside the case to charge them. The indication on the case will be a white LED flashing for 2 seconds to show they are charging.

Charging the Case:

Charge the case via the supplied Type-C charging cable, preferably from any PC or laptop as compared to a USB charger. The indications for the case are:

• White LED flashing = Charging

• Solid white LED = Fully charged

The NOISE AIR BUDS 6 earbuds are fitted with medium-sized tips. However, if you find that they don’t fit perfectly, please remove them and try the small and large ear tips that are included in the package to find the most comfortable and secure fit.

Play/Pause: Tap either earbud twice.

Previous Song: Tap the left earbud thrice.

Next Song: Tap the right earbud thrice.

Volume Up: Tap the right earbud once.

Volume Down: Tap the left earbud once.

Answer Call: Tap either earbud twice.

End Call: Tap either earbud twice.

Reject Call: Touch and hold either earbud for 2 seconds.

Voice Assistant: Tap the right earbud four times.

Gaming mode: Long press the left earbud for 2 seconds.

ANC Mode: Long press the right earbud for 2 seconds.

Transparency Mode: Touch and hold the right earbud for 2 seconds.

Normal Mode: Touch and hold the right earbud for 2 seconds.

Before pairing with the Noise BudsLink App, make sure that your NOISE AIR BUDS 6 is connected to your smartphone.

1. On your smartphone, download the Noise BudsLink App from the Play Store or App Store and install it.

2. Slide to agree to the terms and conditions.

3. Allow requested permission in the app.

4. Turn on the Bluetooth and location on your mobile device.

Note: Ensure that your smartphone is running on Android 9.0+ or iOS 11+ and is connected to mobile data or a Wi-Fi network.

1. Connect your Noise Air Buds 6 with your smartphone by following the steps in the PHONE PAIRING section.

2. Install and open the Noise BudsLink App. Go to the Bluetooth device search page on the app.

3. “Noise Air Buds 6″ will appear on the screen. Click on the Connect option.

4. Once it is connected, the main dashboard window will appear.

Note: It might take up to 15 seconds to establish connection between the app and the Air Buds 6.

The Noise BudsLink App offers the following features for your NOISE AIR BUDS 6:

• Action Button – Set the actions for each earbud.

• Voice Control – Control your device with voice prompts.

• Smart Calls – Set voice commands to control calls, turn on Side Tones to hear your voice and activate caller announcements.

• Superhearing – Control ANC and Transparency settings.

• Equalizer – Choose from preset modes or customise your own.

• Battery Prediction – Check how much charge is left for calls and media.

• Fast Mute – Quickly mute/unmute during calls by setting an action on either earbud.

• Multipoint – Enable this feature to simultaneously connect to two devices.

• Low Latency Audio – Enable for synchronised audio output.

• Assistant – Explore voice prompts and action buttons for voice assistance.

To update your NOISE AIR BUDS 6, follow these steps:

1. In the Noise BudsLink App, you will see a “New Update Available” banner under the product name on the dashboard.

2. Tap on the banner and click on “Start Update”.

3. Click on “Start” to begin the update. It may take about 5 minutes to update the product.

Disclaimer: Ensure your product is charged more than 50% before starting the update.

Follow these tips to get the best out of your new NOISE AIR BUDS 6:

• Do not expose the earbuds to liquids, moisture, or humidity as they have electronics and batteries inside.

• Do not try to disassemble your earbuds. There are no user-serviceable parts inside it.

• Do not use abrasive cleaning solvents to clean your new earbuds. Wipe them down with a slightly damp cloth if and when necessary.

• Remove and clean the earbud tips regularly to ensure that you always enjoy the best sound possible.

• Do not expose the earbuds to extremely high or low temperatures as this may damage the battery or even deform the plastic parts.

• Do not throw the earbuds in a fire to dispose of them. The internal battery may explode.

• Try not to drop the earbuds and keep them away from sharp objects such as keys in your pockets.

• Only charge your earbuds from 5V USB ports such as phone chargers and laptop or PC chargers.

• Never listen to music at high volume or you may permanently damage your hearing.

• Pay attention to your surroundings and never wear any earphones while riding, driving or walking in traffic.