FREE ENGLISH NISSAN ARIYA 2023 (02) PDF USER GUIDE
FREE ENGLISH NISSAN ARIYA 2023 (02) PDF USER MANUAL
FREE ENGLISH NISSAN ARIYA 2023 (02) PDF OWNER GUIDE
FREE ENGLISH NISSAN ARIYA 2023 (02) PDF OWNER MANUAL
FREE ENGLISH NISSAN ARIYA 2023 (02) PDF REFERENCE GUIDE
FREE ENGLISH NISSAN ARIYA 2023 (02) PDF INSTRUCTION GUIDE
FREE ENGLISH NISSAN ARIYA 2023 (02) PDF REFERENCE MANUAL
FREE ENGLISH NISSAN ARIYA 2023 (02) PDF INSTRUCTION MANUAL
FREE ENGLISH NISSAN ARIYA 2023 (02) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD NISSAN ARIYA 2023 (02) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
NISSAN ARIYA 2023 (02) PDF SUMMARY:
How do I lock the Nissan Ariya?
To lock the vehicle, push the driver door handle touch sensor. For all other doors, press and hold the driver door handle touch sensor. For the liftgate door, press the power liftgate door request switch or press and hold the button on the key.
How do I unlock the Nissan Ariya?
To unlock the vehicle, pull on the door handle to unlock the corresponding door. The hazard indicator flashes once and the vehicle will beep once and open. Alternatively, press the button on the key fob to unlock the driver’s side door. Press the button again within 60 seconds to unlock all other doors.
How can I activate the panic alarm?
Press and hold the button on the Intelligent Key for more than 0.5 seconds to activate the panic alarm. Once activated, the panic alarm and headlights will stay on for a period of time.
How do I turn the panic alarm off?
Press any button on the key fob to turn the panic alarm off if the key fob is in range.
How do I open the liftgate?
To open the liftgate, press the button for longer than 1 second.
How do I close the liftgate?
To close the liftgate, press the button for longer than 1 second.
How do I adjust the front seats?
To slide the seat forward or backward, push the switch forward or backward. To recline the seatback, push the switch forward or backward.
How do I raise or lower the front portion or height of the seat?
To raise or lower the front portion or height of the seat, push the front or back end of the switch up or down.
How do I adjust the seat lumbar support?
To adjust the seat lumbar support, push the front, back, upper, or downside end of the switch.
How do I fold the rear seatbacks down?
To fold the seatback down, pull the release lever.
How do I return the seatbacks to the seating position?
To return the seatback to the seating position, lift up each seatback and push it to the upright position until it is latched. Then return the seat belt to its original position.
How do I activate Rear Door Alert in the vehicle information display?
- Press the buttons on the steering wheel until the “Settings” menu screen appears.
- Using the buttons, select “Vehicle Settings”, “Rear Door Alert” and press the OK button.
- Choose from the following options: “Horn & Alert”, “Alert Only”, or “OFF” and then press the OK button.
How do I dismiss Rear Door Alert?
To dismiss the warning, use the buttons on the steering wheel to select “Dismiss Message”. If no selection is made, this message will disappear after a period of time.
How do I temporarily disable Rear Door Alert?
To temporarily disable Rear Door Alert for the remainder of the current trip, use the buttons on the steering wheel to select “Disable Alert” and press the OK button.
How do I start the EV system?
- Make sure the NISSAN Intelligent Key® is with you.
- Push the power switch to start the EV system.
- Confirm the parking brake is applied and push the P (PARK) switch on the shift lever to place it in the P (PARK) position.
- Depress the brake pedal.
- Check that the READY to drive indicator light illuminates and the start-up sound is audible.
- Check the Li-ion battery level and the estimated driving range shown on the meter.
How do I turn off the EV system?
- Push the P (PARK) switch on the shift lever to place it in the P (PARK) position.
- Apply the parking brake.
- Push the power switch to the OFF position.
What does the rear seatbelt warning indicate?
The rear seatbelt warning appears for 65 seconds after the power switch is placed in the ON position and the EV system is started. This warning shows the status of the rear seat belts.
What do the different colors of the rear seat belt status mean?
When one of the rear seat belts is buckled, the corresponding rear seat belt status will appear in gray or green, depending on the model. When one of the rear seat belts is unbuckled, the rear seat belt status image will appear red and a chime will sound. This chime will continue to sound until the seat belt is buckled again.
How do I adjust the outside mirrors?
- Push the left switch to select the driver-side outside mirror or push the right switch to select the passenger-side outside mirror.
- Adjust each mirror to the desired position using the outside mirror control switch.
How does the reverse tilt-down feature work?
When backing up the vehicle, the right or left outside mirror will turn downward automatically to provide better rear visibility.
How do I set up the reverse tilt-down feature?
- Place the ignition switch in the ON position.
- Using or , choose which mirror you would like to tilt-down when R (REVERSE) is selected.
- Move the shift lever to the R (REVERSE) position.
- The selected outside mirror will move to the reverse tilt-down position. While in R (REVERSE), you can adjust the selected mirror’s tilt-down position using.
- The mirror will return to the position set in Step 4 the next time the vehicle is placed in R (REVERSE).
When will the outside mirror surfaces return to their original positions?
The outside mirror surfaces will return to their original positions when one of the following conditions has occurred: The shift lever is moved to any position other than R (REVERSE) for a short period of time, the selected mirror is deselected using the left switch or the right switch, the vehicle speed increases to more than 5 mph (8 km/h), or the ignition switch is placed in the OFF position.
How do the automatic folding mirrors work?
The Automatic Folding Mirrors will automatically fold the mirrors in and out as needed by pressing the switch.
How do I switch between the two modes of the Intelligent Rear View Mirror?
You can switch between conventional rearview mirror mode and Intelligent Rear View Mirror mode (camera view mode) by using the mode select lever.
How do I access the settings menu when the Intelligent Rear View Mirror mode is on?
When the Intelligent Rear View Mirror mode is on, the settings menu can be selected by pressing the menu button.
What settings can I adjust in the Intelligent Rear View Mirror settings menu?
You can adjust the following settings: Brightness, Down/Up, Language, Rotation, Left/Right, Switch Backlight, Indication, and License.
How do I program the HomeLink® Universal Transceiver?
- Press and release the desired HomeLink® button. The indicator light will flash.
- Position the hand-held transceiver 1-3 in (2-8 cm) away from the HomeLink® surface, keeping the HomeLink® indicator light in view.
- While the indicator light is flashing in orange, press and hold the hand-held transmitter button. DO NOT release until the HomeLink® indicator light changes. When the indicator light illuminates in green, the hand-held transmitter button may be released.
How do I verify HomeLink programming is complete?
To verify the programming is complete, press and hold the HomeLink® button and observe the indicator light: A solid, continuous light indicates the programming is complete and the HomeLink® button will activate your device. If the device does not operate or operates but no door status indicator appears, this indicates additional steps are required to complete the programming.
What additional steps are required to complete the programming process?
- At the receiver of the device that you are programming to the HomeLink® button, press and release the learn or smart button (the name may vary by manufacturer, but it is usually located near where the hanging antenna wire is attached to the unit). You have approximately 30 seconds to initiate the following step.
- Press and hold the programmed HomeLink® button for 2 seconds and release. You may have to repeat the previous two steps up to 3 times to complete the programming process. HomeLink® should now activate your device.
- The two-way communication must be programmed and confirmed. For details on the procedure for your vehicle and garage door opener, please visit http://www.homelink.com/Nissan.
How do I use the Emergency Call (SOS) feature?
- Press the switch cover to release.
- Press the SOS button on the overhead console.
How do I access the Heater and Air Conditioner screen?
The Heater and Air Conditioner screen can be accessed by pressing the “Climate Controls” button on the touch screen bar.
How do I turn the climate control system on or off?
Press the ON•OFF button/key on the front display or press the button/key on the touch screen to turn the climate control system on or off.
How do I use the automatic mode for climate control?
Press the AUTO button/key on the front display or on the touch screen. The system will automatically control the inside temperature (automatic cooling and/or dehumidified heating), air flow distribution, and fan speed.
How do I adjust the temperature?
Press the temperature control buttons/keys on the front display or touch screen to turn up for warmer air or down for cooler air.
How do I manually adjust the fan speed?
Press the fan speed control button/key on the front display or touch screen to manually adjust the fan speed up or down.
How do I control the air flow?
Touch the air flow control key on the touch screen to cycle through the following air flow outlets: Air flows from the center and side vents, air flows from the center, side and foot vents, air flows mainly from the foot vents, or air flows from the front defroster and foot vents.
How do I manually turn the A/C on or off?
Press the A/C button on the touch screen to manually turn the A/C on or off.
How do I defrost/defog the front and side windows?
Press the front defroster button on the front display to turn the system on. Both the air conditioner and heater will automatically turn on when the front defroster mode is selected.
How do I quickly remove moisture or fog on the front window?
Set the temperature control buttons and the fan speed control buttons to their maximum settings.
How do I control air intake?
For air recirculation, press the intake air control button/key on the front display or touch screen to recirculate air inside the vehicle. The indicator light on the button/key will illuminate. For outside air recirculation, press the intake air control button/key three times to turn off air recirculation. For automatic air intake control mode, press the intake air control button/key. The inside/outside circulation will then be controlled automatically.
How do I turn the rear window and outside mirror defroster on or off?
Push the rear window and outside mirror defroster switch on the front display to turn the system on or off.
How do I access the climate control screen for each seat?
Push the or key on the touch screen to access the climate control screen for each seat.
How do I turn the climate-controlled seats on or off?
Press the climate control key to turn the climate-controlled seats ON or OFF.
How do I adjust the temperature of my seat?
Use the temperature keys to adjust the temperature of your seat.
How do I activate the heated steering wheel?
Push the A key to open the climate control screen. Press the indicator light key on the touch screen. The icon will illuminate.
How do I turn on the headlights?
Turn the headlight control switch to the position to turn on the front parking, tail, license plate and instrument panel lights. Turn the switch to the position to turn on the headlights.
How do I activate the Intelligent Auto Headlight system?
Turn the headlight control switch to the AUTO position then turn the power switch to ON.
How do I deactivate the auto headlight system?
Turn the headlight control switch to the OFF position, position or position.
How do I select the high beam function?
With the headlights turned to the position, push the headlight control switch forward to select the high beam function. The blue indicator light will illuminate in the instrument panel. Pull the headlight switch back to the original position to select the low beam. The blue indicator light will extinguish.
How do I flash the headlamp high beams on and off?
Pull and release the headlight control switch to flash the headlamp high beams on and off.
How do I activate the High Beam Assist system?
Push the switch as shown. The high beam assist indicator light in the meter will illuminate while the headlights are turned on.
How do I operate the fog lights?
In order to operate the fog lights, you must have your headlights on with the low beams selected. Turn the switch (inside collar) to the position to turn on the fog lights. Turn the switch (inside collar) to the OFF position to turn off the fog lights.
How do I signal a lane change?
Move the lever up or down until the turn signal begins to flash but the lever does not latch to signal a lane change. Hold the lever until the lane change is completed. Move the lever up or down until the turn signal begins to flash but the lever does not latch and release the lever. The turn signal will automatically flash three times.
How do I operate the windshield wipers?
Move the lever to one of the following positions to operate the windshield wipers: Mist (MIST) – This is a one-sweep operation of the front wipers. Intermittent (INT)/AUTO (if so equipped) – Front wipers operate intermittently by moving the lever down to the INT position and then rotating the control ring to increase or decrease INT wiper speed. Also, the intermittent operation speed varies in accordance with the vehicle speed. Low (LO) – Front wipers operate at a continuous low speed. High (HI) – Front wipers operate at a continuous high speed.
How do I activate the front washer?
Pull the lever toward you to activate the front washer. The front wipers will operate several times.
How do I set the rain-sensing auto wiper system?
Push the lever down to the AUTO position. The wiper will sweep once while the power switch is in the “ON” position.
How do I adjust the rain sensor sensitivity level?
The rain sensor sensitivity level can be adjusted by turning the knob toward (High) or (Low).
How do I operate the rear wiper?
Intermittent (INT) – Rear wiper operates intermittently. Low (ON) – Rear wiper operates at a continuous low speed.
How do I activate the rear washer?
Push the lever forward to activate the rear washer. The rear wiper will operate several times.
What items are displayed on the vehicle information display?
The vehicle information display displays items such as battery information, audio, navigation, energy economy, Safety Shield, average vehicle speed, driving distance, driving time, cruise control information, Intelligent Key information, indicators and warnings, and settings.
How do I use the vehicle information display?
The vehicle information display can be changed or selected using the scroll/OK dial and the or buttons located on the steering wheel. Press the or buttons on the steering wheel to navigate the vehicle information display. Press the scroll/OK dial on the steering wheel to change or select an item. Press the button on the steering wheel to go back to the previous menu.
How do I reset the drive computer?
- Using the buttons on the steering wheel, navigate to find the Drive Computer screen in the vehicle information display.
- Press the buttons to cycle through to the drive computer you wish to reset. Then press and hold the scroll/OK dial on the steering wheel.
- Select what you would like to reset from the list: ALL Items, Avg Energy Economy, Average Speed, Driving distance and Driving Time. Press the scroll/OK dial to make your selection.
- Make your selection and press the scroll/OK dial again. The reset is complete.
What settings can I change in the setting mode?
The setting mode allows you to change the information displayed in the vehicle information display: VDC Setting, Driver Assistance, Personal Display, Head-Up Display, ECO Mode Setting, TPMS Setting, Clock, Vehicle Settings, EV Settings, Maintenance, Customize Display, Unit/Language, and Factory Reset.
How do I change the meter screen view?
- Push the shortcut menu button on the steering wheel.
- “ShortCut Menu” will appear on the vehicle information display.
- Select “Change Meter View” by rotating the scroll dial and push it to make a selection.
How do I activate the Map in the Meter View?
Pressing the buttons on the steering wheel to cycle through the screens in the vehicle information display until you get to the map. With navigation in full screen on the center console display, use two fingers (in a “peace sign”) and swipe from the right side of the screen to the left.
How do I access the Ambient Lighting and Accent Lighting settings?
- Select the “Settings” screen.
- Select “Vehicle Settings”.
- Select “Lighting”. Then choose from “Ambient Lighting” or “Accent Lighting to adjust the lighting feature of your vehicle information display.
What does it mean when the low tire pressure warning light illuminates?
The low tire pressure warning light and a Tire Pressure Low – Add Air warning will illuminate when one or more tires are low in pressure and air is needed.
Where can I find the recommended tire pressure?
Adjust the tire pressure to the recommended tire pressure shown on the Tire and Loading Information label located in the driver’s door opening.
What does it mean if the low tire pressure warning light flashes?
When the low tire pressure warning light flashes for approximately 1 minute and then remains on, the TPMS is not functioning properly. Have the system checked.
How do I use the Easy-Fill Tire Alert system?
- Move the shift lever to the P (PARK) position and apply the parking brake.
- Place the power switch in the ON position. Do not place the power switch in the READY to drive mode.
- Add air to the under-inflated tire, and within a few seconds, the hazard warning lights start flashing.
- When the designated tire pressure is reached, the horn will beep once and the hazard warning flashers will stop flashing.
- Repeat this procedure for any additional under-inflated tires.
How do I open the power liftgate when it is closed and locked?
When the power liftgate release is closed and locked, the rear liftgate will open automatically by pushing and holding the switch on the instrument panel.
How do I unlock the power liftgate?
Push the liftgate opener switch. Pull the power liftgate up to open. The power liftgate can also be unlocked by pressing the button on the NISSAN Intelligent Key® twice, pushing the liftgate opener switch while carrying the Intelligent Key with you, pressing the button on the NISSAN Intelligent key for more than 1 second, pushing the door handle touch sensor twice, or pushing the power door lock switch to the unlock position.
How do I lock the power liftgate?
The power liftgate does not lock when closed. To lock the power liftgate, use the power liftgate request switch, power door lock, or key fob.
How do I open the charge port lid?
To open the charge port lid, unlock the doors then push the part of the lid near the rear of the vehicle. When the charge port lid springs up slightly, place your hand underneath the lid and open it fully.
How do I close the charge port lid?
To close the charge port lid, slowly move the lid and lock it securely in place.
How do I lock the charge connector to the normal charge port?
The normal or trickle charge connector can be locked to the normal charge port by selecting the charge connector lock mode in the vehicle information display.
What are the different modes of the charge connector lock system?
AUTO – The charge connector is locked while charging is in progress and will automatically unlock when charging is complete. LOCK – The charge connector will remain locked until UNLOCK mode is selected or until the temporary unlock operation is performed. UNLOCK – When the unlock mode is selected, the charge connector will unlock and remain unlocked.
How does the temporary unlock mode work?
When the charge connector lock mode is selected as AUTO or LOCK in the vehicle information display: The light will turn on after the charge connector lock is unlocked. The light will turn off after the charge connector lock is locked. When the charge connector is disconnected, the light illuminates for about 30 seconds.
What happens to the vehicle range in cold weather?
Vehicle range is reduced when the heater is used and the battery temperature drops below 77°F (25°C). Using the climate control system to heat the cabin when the outside temperature is below 32°F (0°C) uses more electricity and affects vehicle range more than using the heater at temperatures above 32°F (0°C).
What are the recommendations for parking in extremely cold weather?
Do not store the vehicle in temperatures below -13°F (-25°C) for over seven days. If the outside temperature is -13°F (-25°C) or lower, the Li-ion battery may freeze, and it cannot be charged or provide power to run the vehicle.
What does it mean if the Electric Vehicle (EV) system warning light illuminates?
The warning light will illuminate if there is a malfunction in the following systems: Traction motor and inverter system, charge port or on-board charger, Li-ion battery system, cooling system, shift control system, or emergency shut-off system is activated. If the warning light illuminates, it is recommended that you visit a NISSAN® certified ARIYA dealer.
What methods are available to perform the charge operation?
Normal charge, trickle charge, and quick charge.
How do I perform a normal charge?
- Perform a normal charge using the charging device installed in your home.
- Normal charging uses SAE J1772 compliant charger connected to a dedicated 220-240 volt circuit.
- Place the power switch in the OFF position.
- Press the charge port tab and open the cap.
- Connect the charge connector to the charge port. When connected correctly, a beep will sound once.
How do I stop a normal charge?
- Ensure that the charge connector lock is not engaged.
- Press the button on the charge connector to release the lock and remove the charge connector from the charge port.
- Close the charge port cap and the charge port lid.
How do I perform a trickle charge?
- Perform a trickle charge by connecting CCS charge connector to the Electric Vehicle Supply Equipment (EVSE) (if so equipped) or a SAE J1772 compliant cord set to connect the vehicle to a dedicated AC 110-120 volt, 15A dedicated outlet.
- Place the power switch in the OFF position.
- Open the charge port lid.
- Connect the EVSE plug to the 110-120 volt, 15A dedicated electrical outlet. The EVSE control box’s green indicator light will illuminate when connected properly.
- Open the charge port cap.
- Remove the safety cap from the charge connector.
- Connect the charge connector to the charge port. A beep will sound once.
- While the Li-ion battery is charging, you can hang it up by passing a rope through the hole in the EVSE control box.
How do I stop trickle charging?
- Ensure that the charge connector lock is not engaged.
- Press the button on the charge connector to release the lock and remove the charge connector from the charge port.
- Close the charge port cap and the charge port lid.
- Attach the safety cap to the charge connector, remove the electrical plug from the dedicated outlet, and store it in the case.
How do I perform a quick charge?
- Perform a quick charge by connecting a CCS charge connector at a public charging station to charge the battery in a short period of time.
- Quick charging is possible if the battery temperature is not near the red zone.
- Place the power switch in the OFF position.
- Open the charge port lid and the charge port cap.
- Align the groove of the charge connector with the groove of the charge port, then insert the charge connector.
- Grasp the lock lever and lock the charge connector.
- Follow the instructions on the quick charge equipment to start charging. When the equipment is properly installed and ready to charge, a beep sounds twice and the charging status indicator light will change.
How do I stop quick charging?
- The charge connector can be disconnected from the vehicle when the charging is stopped.
- Unlock the charge connector and remove it from the vehicle.
- After closing the charge port cap, close the charge port lid.
What do the Li-ion Battery Gauges display?
The Li-ion Battery Available Charge Gauge displays the approximate available Li-ion battery power remaining to drive the vehicle. Charge the Li-ion battery before the blue bar of the gauge disappears. The driving range provides an estimated distance that the vehicle can be driven before recharging is necessary. The driving range is constantly being calculated based on the amount of available Li-ion battery charge and the actual power consumption average.
What does it mean when the power limitation indicator light illuminates?
When the power limitation indicator light illuminates, power provided to the traction motor is reduced. This light illuminates in the following conditions: The Li-ion battery available charge is extremely low, the Li-ion battery temperature is very low, the temperature of the Electric Vehicle (EV) system is high (motor, inverter, coolant system, Li-ion battery, etc.), or the EV system has a malfunction. If the power limitation indicator light is illuminated, follow the instructions provided on the center display.
What does the power meter display?
The power meter displays the traction motor power consumption and the regenerative brake power applied to the Li-ion battery. The white segment moves to the right when power is provided to the traction motor. The white segment moves to the left when power is generated and provided to the Li-ion battery by the regenerative brake system. The illuminated segments on the display are narrowed if the power provided to the motor is limited or if regenerative braking is limited.
What affects quick charge times in cold weather?
It may take more time to charge the Li-ion battery using the quick charger if the vehicle is parked in a cold location (for example, 32°F [0°C]) for a long period of time. It may take more time to charge the Li-ion battery using the quick charger if the temperature of the Li-ion battery is high or low.
How do I operate the liftgate hands-free?
- Ensure you have the NISSAN Intelligent Key® within 31.5 in (80 cm) of the liftgate.
- Use a quick kicking motion under the center of the rear bumper. After 2 seconds, the vehicle will beep three times and the liftgate will open.
- Do not swing foot side to side or pause during kicking motion.
How do I update the vehicle software over-the-air?
If so equipped, when new software is available, a message will be shown. Choose one of the following prompts on the screen: Yes – Triggers the Software update to start in the background. You can continue to use the system during the Software update. Later – Skips the Software update, the pop-up message is hidden and will be shown again in the next power cycle. No (display may vary) – Skips the software update, the pop-up message is hidden and will be shown again at a later date.
How do I manually update the software?
- Press the MENU button on the control panel.
- Touch “Info” and then touch “System Updates”.
- Touch “Software Update”.
- Touch “Start Software Update” and then “Download”.
What do I do after downloading the software update?
When the message appears, turn the vehicle off for at least 20 minutes. The update will be applied on the next power on cycle.
How do I connect to a Wi-Fi network?
- Press the MENU button on the control panel. Then press the “Info” key to take you to the “Connections” screen.
- Touch “Connections” and then touch “Wi-Fi”.
- Touch “Wi-Fi” to turn it on.
- Touch, and then enter your Wi-Fi network name and password when prompted. A message will appear under the network name when your vehicle is successfully connected.
How do I manually update my software using Wi-Fi?
- Press the MENU button on the control panel.
- Touch “Info” and then touch “System Updates”.
- Touch “Software Update”, “Start Software Update”, touch “Software Update”, and then touch “Download”.
What do I do after updating the software using Wi-Fi?
When the message appears, turn the vehicle off for at least 20 minutes. When the vehicle is restarted a message will appear verifying that the update is complete.
How do I turn on automatic updates of map software?
- Press the MENU button on the control panel.
- Touch “Info” and then touch “System Updates”.
- Touch “Map Update” and then touch “Map Update Settings”.
- Select an area to be updated and touch “Start”.
What happens when a map update is available for the selected region?
When a map update is available for the selected region, a pop-up message will be shown on the screen. Touch “Yes” to start the map download and update or ”Later” to see the pop-up again in the next power cycle.
How do I manually update the map software via Wi-Fi?
- Connect the vehicle to an available Wi-Fi network.
- Press the MENU button on the control panel.
- Touch “Info” and then touch “System Updates”.
- Touch “Map Update” and then touch “Update via Wi-Fi”.
- Select an area to be updated and touch “Start”.
How do I access various functions on the touch-screen display?
Various functions can be accessed by touching the items on the Launch Bar, which is displayed on most of the main screens. Touching these keys will bring up the corresponding screens.
How do I access clock settings?
Press Clock.
How do I access the “Settings” menu?
This key will navigate you to the “Settings” menu, where you can access other features for this vehicle.
How do I set up shortcuts and widgets?
The shortcut and widget selections can be set up in the “Customize Menus” screen which can be accessed by touching the Settings key followed by the “Customize Menus” key then select the “Customize Home Menu”. This will display the “Customize Menus” screen, which allows shortcuts and widgets to be added, replaced, rearranged, or deleted.
How do I access Quick Settings?
Quick Settings allows you to make quick changes to the interior of your vehicle for the audio. The Quick Settings screen is displayed by swiping the touch screen display from top to bottom.
How else can I locate the sound settings?
- Touch the “Settings” key.
- Touch the “Sound and Beeps” key.
- Touch the “Sound” key.
How can I review notifications that I receive?
You can review notifications that you receive by pressing the “Notification” key on the screen. This will show you text messages and phone calls that you have received. Your phone must be paired by Bluetooth® in order for this feature to work.
How do I navigate the vehicle screens?
Two fingers are required in order to move between the screens. A single finger can be used to select items on the screen.
How do I access the Intelligent Route Planner (IRP)?
From the Settings screen, select “Navigation”. Then select “Route Settings”. This feature should be turned on by default and labeled as “Add Chargers Along Route”.
How do I access the Charging Waypoints Screen?
A popup is displayed when a route is completed with charging stops. The info button can be pressed to bring you to the Charging Waypoints Screen, or open the navigation menu and touch the charging waypoints icon.
How do I end or reject an incoming call?
To end or reject an incoming call:
- Press and hold the button on the steering wheel, or
- Touch the Hang up key on the screen
How do I switch to handset during a call?
Start the call using your Bluetooth hands-free phone and touch the “Use Handset” key on the screen to use the handset (cellular phone).
How do I access the current audio source?
Touch the Audio key on the Launch Bar to display the current audio source.
How do I access the source selection screen?
Touch the Source key.
How do I turn the audio system on or off?
To turn the audio system on or off, press the (on•off) button.
How do I increase or decrease the volume?
Turn the VOL (volume) control knob right or left.
How do I adjust the current setting?
Use the TUNE/SCROLL knob to adjust the current setting.
How do I view all audio settings?
Touch the Settings key on the Launch Bar and then touch the “Sound” key.
How do I manually tune the radio?
Turn the TUNE/SCROLL knob left or right.
How do I seek up or down to the next receivable station?
Press the button or the button.
How do I switch to the first channel of the previous or next category for satellite radio?
Press the button or the button.
How do I access different audio sources?
Pressing the AUDIO (SOURCE) button will give access to the AM, FM, SiriusXM®, USB1, USB2, Bluetooth®, Apple CarPlay® or Android Auto™ audio source.
How many preset stations can be set for the FM, AM and satellite radio?
36 preset stations can be set for the FM, AM and satellite radio. These appear at the bottom of the screen when one of these sources is selected.
How do I store a station in a preset?
To store a station in a preset, you must first select a radio band by touching the ”AM” key, “FM” key or “SiriusXM” key then tune to the desired AM, FM or satellite radio station. Next, press and hold the desired station preset key until you hear a beep. The channel indicator will then display, and the sound will resume. Programming is now complete.
How do I retrieve a previously set station?
Select the radio band where the preset was stored, then press the corresponding station select key.
How do I use Apple CarPlay?
Apple CarPlay® lets you use your compatible iPhone® to make calls, listen to music, send and receive messages, get directions and use iPhone® apps directly from your vehicle display.
How do I connect my iPhone to use Apple CarPlay?
Connect your compatible iPhone® to the USB connection port located beneath the climate controls or wirelessly via Bluetooth®.
- Depending on the setting, the startup information screen will appear on the center display.
- Touch “Yes” then “OK” to use Apple CarPlay®.
- After the iPhone is connected, the Apple CarPlay® home screen will appear, and the iPhone® functions displayed on the screen can be operated by the in-vehicle system.
How do I access Siri while connected to Apple CarPlay?
There are two ways to start a Siri® session:
- Press and hold the button on the steering wheel.
- Touch and hold the or key on the lower left corner of the Apple CarPlay® screen.
How do I end a Siri session?
Press the button on the steering wheel or touch the or key on the lower left corner of the Apple CarPlay® screen.
How do I exit the Apple CarPlay screen?
Press the MENU button on the control panel.
How do I return to the Apple CarPlay screen from the main menu?
- Touch the Apple CarPlay® key.
What happens when Apple CarPlay is active?
NISSAN® Phone menu and NISSAN® Voice Recognition cellular phone commands will not be available when Apple CarPlay® is active.
How do I use Android Auto?
Android Auto™ connects with your compatible Android® phone to control your phone, apps and navigation directly from your vehicle display.
How do I set up Android Auto?
Download the Android Auto™ app from the Google Play™ store to your compatible Android phone. Launch the app from your Android® phone and follow the directions for setting up the application. Several permissions will need to be given to the app for Android Auto to fully function on your in-vehicle system.
How do I connect my Android phone to use Android Auto?
To connect your Android® phone to the in-vehicle system, you must connect a USB cable to the USB connection port located beneath the climate controls.
- Depending on the setting, the startup information screen will appear on the center display.
- Touch “Yes” then “OK” to use Android Auto™.
- After the cellular phone is connected, the Android Auto™ home screen will appear and can be operated by the in-vehicle system.
How do I access Google Assistant when connected to Android Auto?
There are three ways to start Google Assistant™:
- Press and hold the button on the steering wheel until a beep is heard.
- Touch the key on the launch bar.
- Say “OK Google” (requires appropriate permissions enabled via cellular phone).
How do I return to the Android Auto home screen after operation?
Touch the key on the Launch Bar.
How do I exit the Android Auto screen?
Touch the key on the Launch Bar and then touch the exit key.
How do I return to the Android Auto home screen from the main menu?
- Touch the key on the Launch Bar, or
- Touch the Info key on the Launch Bar, touch the “Smartphone Connection” key, and then touch the “Android Auto” key.
What happens when Android Auto is active?
NISSAN® Phone menu and NISSAN® Voice Recognition cellular phone commands will not be available when Android Auto™ is active.
What should I do if I have difficulties with connection or performance with Android Auto?
Try a different USB cable.
Where is the wireless charger located?
The wireless charger is located under the center console arm rest.
How do I use the wireless charger?
Ensure the smartphone is positioned horizontally and fully seated on the center of the charging pad over the “Qi” logo. Charging will start automatically. The smartphone will be charged continuously while the ignition switch is in the ON position. All doors should be closed for charging operation to work properly. Phone cases may impact charging condition.
What does the indicator light on the wireless charger mean?
- The indicator will illuminate in orange when the charging process is started.
- When the charging is complete, the indicator illuminates in green.
- If a malfunction occurs or the charging process stops, the indicator will blink in orange.
How do I access the EV Functions feature?
This feature can be accessed by:
- While on the Home Screen, use two fingers (in a “peace sign”) to swipe the screen to the left.
- Touch the “EV ” key.
- Choose which feature you want to view.
What is the Climate Ctrl. Timer function?
This function pre-heats or pre-cools the vehicle’s passenger compartment before driving. This helps reduce power consumption from the Li-ion battery while driving.
How do I adjust the temperature for the Climate Ctrl. Timer?
Touch the -/+ key to adjust the temperature.
How do I set the timer for the Climate Ctrl. Timer?
- Touch to turn on/off the timer. The indicator light will turn on when the timer setting is turned on.
- key:
- Touch to display the Climate Ctrl. Timer setting screen. Set preferred time and day of the week for Climate Ctrl. Timer activation. After completing the settings, place the power switch in the OFF position, and then connect the charge connector to the vehicle.
What is the Charge Timer function?
Use charge timer to schedule when the LI-ion battery charges. You can save three timer settings, including the charging start time and end time. The vehicle automatically begins charging at the scheduled times when the charge connector is connected to the vehicle.
What actions are available for the Charge Timer?
- Charge only at Home:
- When this item turns on, charging timer only works at home.
- Timer Settings:
- Touch to turn the timer on/off. The indicator light will turn on when the timer setting is turned on.
- key:
- Touch key to display the charging time setting screen.
What does the navigation system do?
Your navigation system can calculate a route from your current location to a preferred destination. The real-time map display and turn-by-turn voice guidance will lead you along the route. The navigation system will continually update your vehicle’s position. If you have deviated from the original route, it will recalculate the route from your current location.
What functions are limited when the vehicle speed is above 5 mph (8 km/h)?
To help promote safe driving, some functions cannot be operated or have limited operation when the vehicle speed is above 5 mph (8 km/h). The on-screen text and keys for these restricted functions will be grayed-out or muted and cannot be selected while driving. These functions will become available again when the vehicle speed is reduced to 5 mph (8 km/h). Voice commands may be available for some of the restricted functions.
How do I access different navigation options using the touch screen?
Touch-screen Map Menu – Touch to access different navigation options such as “Save Location”, “Points of Interest”, “Map Icons” and “Cancel Route”. Navigation Options Bar – Bar with personally selected options to choose from. Navigation key – Press to display the map. Settings – Touch to display the system settings.
How do I set a destination using the touch-screen display?
- Touch the “Destination” key on the Launch Bar and touch “Enter POI/Address”. Enter a nearby location name or the street address of the desired location.
How do I set a destination using voice recognition?
- Press the button on the steering wheel, and after the tone, say “Navigation”. From here, the system will give you the options available for setting a destination.
How do I set a destination using Points of Interest (POI) with the touch-screen display?
- Touch the “POI” key and then select one of the displayed options for choosing your destination. To find a specific location, touch the “Spell Name” key and type the desired location’s name using the on-screen keyboard.
How do I set a destination using Points of Interest (POI) with voice recognition?
- Press the button on the steering wheel, and after the tone, say “Navigation”. Next, say “Nearby” or “POI by category”. The system will give you the options available for setting a POI.
What is NissanConnect Services?
NissanConnect® Services is a collection of security and convenience services that make it easy to access information, stay connected to your vehicle and get assistance when you need it.
What remote functions can I perform with NissanConnect?
NissanConnect® enables you to perform remote functions from a compatible internet-enabled smartphone, such as:
- Battery status check – The status of the battery can be checked even if you are not in the vehicle.
- Unplugged status and charge status – A notification e-mail can be sent if the charging connector is disconnected or if charging is complete.
- Remote charge and remote climate control – Start battery charging, or climate controls can be set.
- Destinations by Google™ – Allows you to search for locations near your vehicle’s current location, near a plotted destination, near the map’s scroll position or near a searched city center.
How do I enroll in NissanConnect Services?
To enroll in NissanConnect® Services, create an account or log into your Nissan Owner Portal with your Vehicle Identification Number (VIN). Follow the prompts to enroll in NissanConnect® Services. Next, download the NissanConnect® Services app on your compatible iPhone® or Android® smartphone and log into it using your Nissan Owner Portal ID and password.
What are some of the features that may be available for my vehicle with NissanConnect Services?
- Automatic Collision Notification – A service that generates an automatic connection between the vehicle and the Emergency Response Center when the vehicle has been involved in an accident that was severe enough to deploy the air bags.
- Connection to Roadside Assistance – Allows you to contact a Roadside Response Specialist who can dispatch roadside assistance in non-emergency situations.
- Stolen Vehicle Locator – A service that works in coordination with law enforcement agencies to assist in the recovery of a stolen vehicle.
- Remote Door Lock/Unlock – For use when you forget to lock your car or if you need to open it and don’t have the keys. To use this feature, log into the NissanConnect® Services companion app or website or contact a NissanConnect® Services Response Specialist.
- Alarm Notification – This system will notify you when the factory-installed vehicle alarm system has been activated.
- Maintenance Alert – Review notifications via a selected method of a vehicle system malfunction that triggers instrument panel warning lights.
- Valet Alert – Use Valet Alert to set up a 0.2-mile radius around your vehicle. Activate alerts via the NissanConnect® Services companion app.
- Curfew Alert – Specify curfew limits via the NissanConnect® Services companion app and will be notified via a selected method if curfew is violated.
- Route Planner – Allows you to plan your itinerary and simplify your trip. By entering a starting point and end destination, Route Planner will look at the vehicle’s range and suggest routes by identifying charging station waypoints along the way.
- Boundary Alert- A feature that allows you to monitor the movement of your vehicle in and out of specified regions you have set on the Monitoring section of the NissanConnect® Services companion app.
- Speed Alert – Sends you alerts when your vehicle speed exceeds a threshold you have set on the companion app.
How do I access the NissanConnect Services features in my vehicle?
- From the Home Screen, swipe the screen to the left.
- Touch the “All Apps” key.
- Touch the “NissanConnect Services” key.
How do I access SiriusXM® Travel Link and SiriusXM® Traffic?
Touch the Info key to access SiriusXM® Travel Link and SiriusXM® Traffic.
What information does SiriusXM® Travel Link provide?
SiriusXM® Travel Link provides access to real-time weather information and forecasts, Charging Station Info, movie listings, sport scores and stock quotes.
What information does SiriusXM® Traffic provide?
SiriusXM® Traffic provides information that may help to avoid delays due to traffic incidents. Traffic jams, roadwork, road closures around the current location, etc., are represented graphically on the map by icons depicting the nature of the event. Incidents on the route are automatically displayed as they are approached.
How does the Hands-Free Text Messaging Assistant work?
This system allows for sending and receiving text messages through the vehicle’s interface. Using predefined or custom messages, send a text to an entry stored in your Bluetooth® Hands-free Phone System. Once enabled, the date, sender and delivery time are shown on the control panel display when the vehicle speed is less than 5 mph (8 km/h). Text messages have the option of being read aloud at all speeds. Once the vehicle is in motion, text messages can only be replied to using the Voice Recognition button on the steering wheel. Text messages can be created manually when the vehicle is not in motion. Custom text messages must be created in advance.
What is required for text messages to appear on the touch-screen display?
Many cellular phones may require special permission to enable text messaging. Check the cellular phone’s screen during Bluetooth® pairing. For some cellular phones, you may need to enable “Notifications” in the cellular phone’s Bluetooth® menu.
How do I use Bluetooth streaming audio?
If you have a compatible Bluetooth® device with streaming audio (A2DP profile), you can set up the wireless connection between your Bluetooth® device and the in-vehicle audio system. This connection allows you to listen to audio from the Bluetooth® device using your vehicle’s speakers.
- Touch the “Settings” key on the main menu screen, then touch the “Connections” key.
- On the “Bluetooth” tab, touch the key next to you connected phone.
- Touch the “Bluetooth Audio” key to turn this feature on to “Active”.
What is Awake-Words capability “Hello Nissan”?
Awake words is a feature that allows you to interact with your vehicle while loud music is playing. Your voice can overlap with voice guidance for navigation. It is not necessary to push any keys on your steering wheel to say the next command.
How do I allow the “Hello Nissan” feature?
This feature can be found by going to:
- Touch the “Settings” key"
- Touch the “Sound and Beeps” key
- Touch the “System Voice” key
- Touch the “Allow “Hello Nissan”” Key This feature can be used for the following items:
- Audio
- Navigation
- Bluetooth
What is Amazon Alexa?
Alexa Built-in can be used as a Virtual Personal Assistant. You can log in to your Amazon account and use Alexa like you would with an Amazon speaker device.
How do I get to the Amazon Alexa screen?
- From the Home Screen, swipe the screen to the left.
- Touch the “Alexa” key.
What supports the forward driving aids for my vehicle?
A camera and sensor support the forward driving aids for your vehicle. The camera sensor is located above the inside mirror and the radar sensor is located on the front of the vehicle.
What Forward Driving Aid systems are supported by the camera and radar sensors?
Forward Driving Aid systems supported by these sensors include, but are not limited to:
- Intelligent Cruise Control (ICC)
- Automatic Emergency Braking (AEB) with Pedestrian Detection
- Intelligent Forward Collision Warning (I-FCW)
- Lane Departure Warning
- Intelligent Lane Intervention
- ProPILOT Assist Systems
What does it mean if the “Forward Driving Aids temporarily disabled Front Sensor blocked See Owner’s Manual” warning illuminates?
The warning may illuminate if the front radar sensor is obstructed.
What does it mean if the warning light illuminates and blinks?
The warning light may illuminate and blink if the front camera sensor is obstructed. If this icon is flashing, turn on the windshield wipers to clean the front windshield and/or turn on the windshield defrost setting for a few minutes until it clears.
What can cause the front sensor areas to become obstructed?
Front sensor areas may become obstructed due to mud, dirt, snow, ice, and inclement weather (rain, fog, snow, etc).
What should I do if the warning message appears?
If the warning message appears, stop the vehicle in a safe place, place the shift lever in the P (PARK) position and turn the EV system off. Clean the sensor areas and restart the EV system. If the message and light continue to appear after cleaning sensor areas, it may mean that forward driving aids are not functioning properly. It is recommended that you have the systems checked by a NISSAN dealer.
How does the Blind Spot Warning (BSW) system work?
An indicator light located on the outside mirrors will illuminate if the side radar sensors detect a vehicle in the detection zone. The BSW system helps to alert the driver when another vehicle moves into the vehicle’s detection zone and is detected.
How does the Intelligent Blind Spot Intervention (I-BSI) system work?
The I-BSI system helps alert the driver of other vehicles in adjacent lanes when changing lanes, and helps assist the driver to return the vehicle to the center of the traveling lane. An indicator light located on the outside mirrors will illuminate if the radar sensors detect a vehicle in the detection zone. When the BSI system is turned on the I-BSI ON indicator light on the instrument panel illuminates. To turn on the I-BSI system, push the switch on the steering wheel. The I-BSI system operates above approximately 37 mph (60 km/h). If the system detects a vehicle in the detection zone and your vehicle is approaching the lane marker, the BSI system provides an audible warning (three times), flashes the side indicator light and slightly applies the brakes for a short period of time on one side to help return the vehicle back to the traveling lane.
How can the I-BSI system be turned on or off?
The I-BSI system can be turned on or off through the “Driver Assistance” menu in the vehicle information display.
What happens if the turn signal is activated and a vehicle is detected by the BSW system?
If the turn signal is activated and a vehicle is detected, the system will chime (twice), the side indicator light will flash, and the BSW indicator will illuminate (yellow) in the vehicle information display.
How does the Rear Cross Traffic Alert (RCTA) system work?
The RCTA system helps to alert the driver of an approaching vehicle when the driver is backing out of a parking space. The system operates when the shift lever is in the R (REVERSE) position and the vehicle speed is less than approximately 5 mph (8 km/h). The side radar sensors can detect an approaching vehicle from up to 66 ft (20 m). The sensors are located on both sides near the rear bumper. The system gives visual and audible warnings if an approaching vehicle is detected.
How can the RCTA and BSW system be turned on or off?
The RCTA and BSW system can be turned on or off through the “Driver Assistance” menu in the vehicle information display.
What is ProPILOT Park?
ProPILOT Park is a parking assist system that can help detect an available parking space and support parallel and perpendicular back-in parking maneuvers. Once activated, the system controls the accelerator, brake, steering wheel and shifting operations in order to support the series of parking operations.
How do I operate ProPILOT Park?
-
Push the ProPILOT Park Switch.
- The ProPILOT Park display appears on the navigation system screen.
- ProPILOT park can also be activated by touching CAMERA button on the navigation system and then touch the P AUTO key on the Intelligent Around View® Monitor screen.
NOTE: Vehicle speed must be less than 12 mph (19 km/h) to activate and search for an available parking space.
-
Select desired parking method by using the switch on the screen:
- Bay Reverse parking (Perpendicular Back-in) parking: Supports reversing into a parking space where vehicles are parked next to each other or within two painted parking lines
- Parallel parking: Supports reversing into a parking space where vehicles are parking in line with each other.
-
Drive forward slowly while the system searches for a space:
- Stop the vehicle next to the available space within approximately 3 ft (1 m). When a parking space is detected, the system will provide a chime and the indicator will appear.
- See owner’s manual for detailed detection requirements.
-
Adjust space, if necessary.
- Using the P arrows key to adjust target parking position as desired.
-
Keep the brake pedal depressed and touch the Start key on the screen.
- The ProPILOT Park icon turns green and the brakes are applied automatically to keep the vehicle stopped.
- Parking control cannot be started if the system detects an obstacle with the parking sonar sensors or cameras.
-
Release the brake pedal and monitor surrounds:
- Vehicle will move in the intended direction as indicated by the green rectangle.
- Vehicle will control accelerator, brake, steering wheel and gear shift as necessary to complete the parking maneuver.
- Parking control may be interrupted if an obstacle or object is detected in the intended path.
- See owner’s manual for additional deactivation or cancellation conditions.
-
Parking complete.
- When the vehicle is in the intended parking space as indicated by the blue rectangle the parking maneuver is complete.
- The shift position changes to P (PARK) and the electronic parking brake is applied.
- A sound and display will notify the driver when the parking control ends.
NOTE: Sonar system alerts are active during the parking maneuver.
How do I pause the ProPILOT Park system?
- Apply the brake pedal. System will resume when brake pedal is released.
How do I deactivate the ProPILOT Park system?
- Shift Gears
- Apply steering wheel input
- Press the accelerator pedal
What is ProPILOT Assist?
ProPILOT Assist is a hands-on driver assistance system intended for limited access expressways and is not designed to be used on city/rural streets. The system is intended to help keep the vehicle in the center of the lane and help maintain a preset distance to the vehicle ahead traveling in the same lane. The two primary features of ProPILOT Assist include Intelligent Cruise Control (ICC) and Steering Assistance. ProPILOT Assist with Navi-link equipped vehicles include Speed Adjust by Route and Speed Limit Assist. ProPILOT Assist 2.0 (if so equipped and subscribed) offers hands-off capability on compatible freeways along with features like Lane Change Assist, Passing Assist, and Route Assist. Driver is responsible for the driving task and must be prepared to steer and brake the vehicle at all times. Vehicles equipped with ProPILOT Assist 2.0 will have two roof mounted antennas.
How do I operate ProPILOT Assist?
- Push the ProPILOT Assist switch on the steering wheel.
- The ProPILOT Assist display appears
- Safety Shield status screen is temporarily displayed.
- Once the vehicle is at the desired speed, push down the cancel switch to the SET- direction.
- The vehicle will maintain the set speed, unless the vehicle detects a slower vehicle in the traveling lane, or Speed Limit Assist or Speed Adjust by Route is active.
- Adjust distance setting using the distance switch, if necessary.
- Distance will vary based on vehicle speed as this setting is time dependent, not based on vehicle length.
How do I increase speed while using ProPILOT Assist?
- Push up and hold the CANCEL switch to the RES+ direction to increase speed in 5 mph (5 km/h) increments.
- Push up and quickly release the CANCEL switch to the RES+ direction to increase speed by 1 mph (1 km/h).
- Accelerate to new desired speed and press the CANCEL switch to the SET- direction.
How do I decrease speed while using ProPILOT Assist?
- Push down and hold the CANCEL switch to the SET- direction to decrease speed in 5 mph (5 km/h) increments.
- Push down and quickly release the CANCEL switch to the SET- direction to decrease speed by 1 mph (1 km/h).
How do I cancel the ProPILOT Assist system?
- Push the CANCEL switch or tap the brake pedal.
- These actions will keep the system in standby. To resume, push up the cancel switch to the RES+ direction to return to the original vehicle set speed, or push down the cancel switch to the SET- direction to set the current vehicle speed.
How do I use Intelligent Cruise Control (by disabling Steering Assist)?
- Push the Steering Assist switch on the instrument panel to the left of the steering column or in the settings of “Driver Assistance” in the vehicle information display.
How do I use conventional (fixed speed) cruise control?
-
Push and Hold the ProPILOT Assist switch on the steering wheel for approximately 1.5 seconds.
NOTE: No other ProPILOT Assist features will be available in conventional (fixed speed) cruise control mode.
What does the color of the ProPILOT Assist display indicate?
Display color will change depending on ProPILOT Assist modes.
What do the ProPILOT Assist indicators on the display mean?
- ProPILOT Assist indicator – Indicates the status of the ProPILOT Assist function.
- Steering Assist indicator – Indicates the status of the Steering Assist function.
- Vehicle Set Speed Indicator – Indicates the vehicle set speed.
- Intelligent Cruise Control (ICC) Status Indicator – Displays the status of the speed control including the distance setting and detection of a lead vehicle.
- Speed Limit Adjust Indicator – Indicates the detected speed limit. “A” indicates Auto mode.
- Route Assist Indicator – Icon is displayed when Route Assist feature is available.
- Lane Change Assist Indicator – Icon is displayed when Lane Change Assist feature is available.
- Lane Marker Indicator – Displays real world lane condition.
- Blind Spot Detection – Indicates when a vehicle is detected in the blind spot.
- Surrounding Vehicle Display – Displays other detected vehicles, including passenger vehicles, trucks and motorcycles. The multi-lane display is only available on HD mapped divided highways
What is the set speed range for Intelligent Cruise Control (ICC)?
The set speed range is between approximately 20 and 90 mph (30 and 144 km/h). Hands-off driving is only available for speeds up to 85 mph (136 km/h).
How does the Intelligent Cruise Control (ICC) system work?
When a vehicle is detected in the lane ahead, the ICC system helps control the vehicle speed to maintain the distance from the vehicle ahead set by the driver. The system may not detect a vehicle that is already stopped in the traveling lane before it enters the detection zone. The driver must control the vehicle to prevent a collision. When the vehicle ahead decelerates, your vehicle decelerates to maintain the distance from the vehicle ahead set by the driver. Once the vehicle ahead stops, the ICC system will stop your vehicle and keep the vehicle stopped. When the vehicle ahead begins to move, push and release the toggle switch towards RES+ or tap the accelerator pedal if your vehicle has been stopped for more 3 seconds (and up to 30 seconds on the highway). The ICC system starts to follow the vehicle ahead. If your vehicle comes closer to the vehicle ahead due to rapid deceleration of that vehicle or if another vehicle cuts in, the system may warn the driver with a chime and ICC system display. The driver must control the vehicle to prevent a collision. ICC may not operate as expected under all conditions. Always be prepared to brake if needed. For example, vehicles cutting into your lane or approaching stopped traffic may not be detected.
How does the Steering Assist system work?
When the lane markers are clear and consistent on both sides of the vehicle, the Steering Assist system assists the driver to help keep the vehicle within the traveling lane. This feature can operate when vehicle speed is above 37 mph (60 km/h). Below 37 mph (60 km/h), ProPILOT Assist must detect a vehicle ahead in order for steering assistance to activate. With the Steering Assist active, when a curve or strong cross wind exceeds the capabilities of the system and your vehicle approaches either the left or the right side of the traveling lane, the I-LI system will flash the I-LI indicator on the vehicle information display and provide steering wheel vibration to alert the driver.
Under what conditions may Steering Assist cancel or temporarily go into standby mode?
- The turn signal is activated (for vehicles not equipped with ProPILOT Assist 2.0)
- Hands are not detected on the steering wheel
- The system cannot detect clear and consistent lane markers
- The lane marker has been crossed
How do I turn off Steering Assist?
- Push the Steering Assist switch on the instrument panel to the left of the steering column or turn it off in the “Driver Assistance” settings under “Lane Centering Assist” in the vehicle information display.
How does the vehicle detect whether the driver has their hands placed on the steering wheel?
The vehicle uses capacitive and torque sensors in the steering wheel to detect whether the driver has their hands placed on the wheel.
CLICK HERE TO DOWNLOAD NISSAN ARIYA 2023 (02) PDF MANUAL