NICEBOY XW200 (01) PDF MANUAL

Wireless headphones

Charging USB-C cable

User manual

1. Power button

2. LED indicator

3. Charging USB-C port

4. Volume control

5. Microphone control

6. Microphone port

7. Mode switching button 2.4G/USB

8. Microphone

To turn the headphones on or off, press and hold the power button (1) for 3 seconds. If the headphones do not connect to any device within 10 minutes of being turned on, they will automatically turn off.

Turn on the headphones using the multifunction button (1). Slide the multifunction button (7) to the 2.4G position and insert the USB receiver into the USB port of your device.

The headphones are a Plug & Play device and will automatically connect after the USB receiver is plugged into your device.

Turn on the headphones using the multifunction button (1). Slide the multifunction button (7) to the USB position. Connect the cable to the USB-C port (3) and then connect the headphones to your device.

Power on/off: press and hold the multifunction button (1) for 3 seconds

Play/pause: briefly press the multifunction button (1)

Next track: double press the multifunction button (1)

Previous track: triple press the multifunction button (1)

Voltage:	5V/0.3A
Battery:	3.3V-4.2V/750mAh
Frequency bands:	2.4GHz
Battery life:	20h
Charging time:	2h
Range:	10m
Sensitivity:	112dB ± 3 dB
Microphone sensitivity:	-36dB ± 3 dB
Frequency range:	20Hz-20000Hz
Microphone frequency range:	100Hz-10000Hz
Connection:	USB-C, USB dongle (2.4GHz)
Battery capacity:	750mAh
OS requirements:	Windows 7/10/11, macOS, PlayStation, Xbox
Dimensions:	178 × 90 × 210 mm
Weight:	240g

Do not use the device in humid or dusty environments.

Do not use the product if it is not functioning properly due to a fall, damage, outdoor use, or water ingress.

Keep out of reach of small children (especially small parts that may pose a choking hazard).

Use the product in accordance with the user manual. Any loss or damage caused by improper use is the responsibility of the user.

Do not clean metal connectors with water.

The device may only be disassembled by a qualified technician. Unauthorized disassembly may result in injury.

Improper handling (prolonged charging, short circuit, breaking with another object, etc.) may result in fire, overheating, or battery leakage.

Do not ingest the battery, as there is a risk of chemical burns.

Throwing the battery into fire or a hot air oven, or mechanically crushing or cutting the battery may lead to an explosion.

Leaving the battery in an environment with extremely high temperatures may cause an explosion or leakage of flammable liquid.

A battery exposed to extremely low air pressure may result in an explosion or leakage of flammable liquid.

Household Use:

The symbol on the product or its original documentation indicates that used electrical or electronic products must not be disposed of with household waste. To dispose of these products properly, take them to a designated collection point where they will be accepted free of charge. Proper disposal of the product helps protect valuable natural resources and prevent potential negative impacts on the environment and human health caused by improper waste disposal. For more detailed information, contact your local authority or the nearest collection point. Fines may be imposed for improper disposal of this type of waste according to national regulations.

Commercial and Business Use:

For proper disposal of electrical and electronic devices for commercial and business use, contact the manufacturer or importer of the product. They will provide you with information about all disposal methods and, based on the date the electrical or electronic device was placed on the market, inform you who is responsible for financing the disposal of this equipment.