Free English MONESSEN AVFL42PIF-RB (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD MONESSEN AVFL42PIF-RB (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What safety actions should be taken if I smell gas around the MONESSEN AVFL42PIF-RB?
If you smell gas, follow these emergency procedures exactly:
Do not try to light any appliance.
Do not touch any electrical switch.
Do not use any phone in your building.
Leave the building immediately.
Immediately call your gas supplier from a neighbor’s phone and follow their instructions.
If you cannot reach your gas supplier, call the fire department.
What are the BTU specifications and orifice sizes for the MONESSEN AVFL42PIF-RB?
The specifications for the MONESSEN AVFL42PIF-RB are as follows:
| Model | Fuel Type | Elevation | Maximum Input BTU/h | Minimum Input BTU/h | Orifice Size (DMS) |
| MONESSEN AVFL42PIF-RB | Propane | 0 to 2000 FT | 24,000 | 19,000 | .0595 (#53) |
How should I prepare the MONESSEN AVFL42PIF-RB for its initial use?
The initial break-in procedure is necessary to cure the materials used during manufacturing. Follow these steps for the MONESSEN AVFL42PIF-RB:
Step 1. Run the appliance continuously on high for three to four hours.
Step 2. Turn the appliance off and allow it to completely cool.
Step 3. Open windows for air circulation during this process, as some people may be sensitive to smoke and odors, and smoke detectors may activate.
What are the operating positions for the MONESSEN AVFL42PIF-RB Electronic Control Module (IFT2-ECM)?
The IFT2-ECM on the MONESSEN AVFL42PIF-RB has a three-position selector switch that must be set properly. When changing positions, pause in each position for 1 to 2 seconds.
OFF Position: The appliance will not respond to any commands from mobile apps or remote controls. The unit should be in the OFF position during installation, service, fuel conversion, or to reset the module after a system error. Switching to OFF while operating will shut down the system.
ON Position: The appliance will ignite and run continuously at the HIGH flame setting. No adjustment in flame height is possible. As a safety feature, the fireplace will automatically shut down after 9 hours of continuous operation in this position.
REMOTE Position: This position allows the operation of the appliance from the remote controls or compatible mobile applications. The switch must be in this position to pair the module with a remote control.
How do I operate the MONESSEN AVFL42PIF-RB using battery power during a power outage?
The MONESSEN AVFL42PIF-RB includes a battery backup system. To operate using DC battery power:
Step 1. Access the control cavity. Ensure the unit is off and cool. Lift the barrier screen off and remove any logs, stone, crushed glass media, and the deflection glass panel.
Step 2. Remove the two screws securing the burner assembly. Lift the burner assembly and place the two engine supports against the lower front space at the bottom of the face and slide into the slots at the bottom of the engine assembly.
Step 3. Locate the battery tray and insert four AA cell batteries, ensuring the correct polarity to avoid module damage.
Step 4. Turn the appliance on using the appropriate control. Note that some functionality, such as lights or auxiliary functions requiring 110-120 VAC power, will be lost when using battery backup.
What is the required maintenance frequency for the MONESSEN AVFL42PIF-RB?
Routine maintenance is required to ensure the safe operation of the MONESSEN AVFL42PIF-RB. Use the following table as a guide:
| Task | Frequency | Responsible Party |
| Surrounds (vacuuming and inspection) | Annually | Homeowner |
| Remote Control (battery replacement and operation check) | Seasonally | Homeowner |
| Pilot Inspection and Cleaning | Annually | Qualified Service Technician |
| Log and Crushed Glass Media Inspection | Annually | Qualified Service Technician |
| Firebox Inspection | Annually | Qualified Service Technician |
| Control Compartment and Burner Cleaning | Annually | Qualified Service Technician |
| Burner Ignition and Operation Check | Annually | Qualified Service Technician |
How do I interpret the LED error codes on the MONESSEN AVFL42PIF-RB control module?
The IFT2-ECM status indicator LED on the MONESSEN AVFL42PIF-RB will blink a RED and GREEN error code if the system enters a lock-out condition. These codes include:
| LED Error Code | Description |
| 2 Red: 1 Green | Pilot valve solenoid not detected or open pilot flame coil. |
| 2 Red: 2 Green | Ignition feedback signal error, spark coil failure, or low-impedance short. |
| 3 Red: 1 Green | Appliance Safely Disabled; pilot sparks for 90 seconds with no flame rectification. |
| 4 Red: 1 Green | 110VAC power is connected to the wall switch. |
| 6 Red: 1 Green | Error ODS. Requires moving the switch to Off for 3 seconds before returning to Remote. |
| 7 Red: 1 Green | Error Power Vent. Requires moving the switch to Off for 3 seconds before returning to Remote. |
| 8 Red: 1 Green | ECM error. |
What should I do if the MONESSEN AVFL42PIF-RB remote control will not transmit?
If the remote for the MONESSEN AVFL42PIF-RB fails to transmit, check the following possible causes and corrective actions:
Low Batteries: Verify that the batteries are functional and installed correctly.
Child Lock: If the remote is in Child Lock mode, the screen will show a locked symbol. Disengage Child Lock mode by moving the internal switch to the unlock position.
Button Pressure: Ensure you are pressing the buttons firmly for one to two seconds to ensure transmission to the control module.
How do I perform a manual shutoff of the MONESSEN AVFL42PIF-RB if the remote fails?
If the remote or wall switch malfunctions and cannot turn off the MONESSEN AVFL42PIF-RB, you can manually shut down the appliance using these methods:
Method 1. Locate the house circuit breaker for the appliance and turn it to the OFF position.
Method 2. Unplug the appliance from its electrical source if it is not hard-wired.
Method 3. Turn the reset switch located on the front face of the appliance to the OFF position. Use caution as surfaces may be hot.
What are the clear space requirements for the MONESSEN AVFL42PIF-RB?
For the MONESSEN AVFL42PIF-RB, maintain a clear space of at least 3 feet in front of the appliance. Do not place combustible objects, candles, electronics, or other heat-sensitive items on the mantel or hearth, as high temperatures may damage them or start a fire.
CLICK HERE TO DOWNLOAD MONESSEN AVFL42PIF-RB (01) PDF DOCUMENT