FREE ENGLISH MIELE DA 5990 W (01) PDF USER GUIDE
FREE ENGLISH MIELE DA 5990 W (01) PDF USER MANUAL
FREE ENGLISH MIELE DA 5990 W (01) PDF OWNER GUIDE
FREE ENGLISH MIELE DA 5990 W (01) PDF OWNER MANUAL
FREE ENGLISH MIELE DA 5990 W (01) PDF REFERENCE GUIDE
FREE ENGLISH MIELE DA 5990 W (01) PDF INSTRUCTION GUIDE
FREE ENGLISH MIELE DA 5990 W (01) PDF REFERENCE MANUAL
FREE ENGLISH MIELE DA 5990 W (01) PDF INSTRUCTION MANUAL
FREE ENGLISH MIELE DA 5990 W (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD MIELE DA 5990 W (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
MIELE DA 5990 W (01) PDF SUMMARY:
How do I turn on the fan?
Press the On/Off button.
How do I select the power level?
Use the “–/+” controls to select the desired power level. The “+” increases the fan speed, and the “–” decreases the fan speed. Levels “1” to “3” are usually sufficient for normal cooking. Level “4” is an intensive setting that should be used for a short period when frying or cooking food with a strong aroma.
How do I program the intensive level to switch back automatically?
Turn the fan and the lights off. Press and hold the “–” control and “+” control at the same time for 10 seconds. The first indicator lights. Press the following buttons one after another: the light button, the “–” button, and the light button again. If the power level indicators “1” and “4” flash, the automatic switch back is not activated. To activate the automatic switch back press the “+” button. The power level indicators “1” and “4” light continuously. To deactivate, press the “–” button. To save the setting, press the on/off button. If the procedure is not stored within 4 minutes of programming, the hood will automatically default to the “old” data.
How do I turn off the fan?
Press the On/Off button to turn the fan off. The indicator goes out.
How does the automatic safety shut off work?
The fan will turn off automatically 10 hours after the last button was activated. The lighting will remain on. Press the On/Off button to turn the fan back on again.
How do I turn the lighting on and off?
Press the light button briefly to turn on the lighting. The light button indicator illuminates. Press the light button briefly again to turn off the lighting. The light button indicator will go out.
What should I avoid when cleaning the hood casing?
Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the hood. Avoid cleaning agents containing soda, acids, chlorides or thinners, abrasive cleaning agents, abrasive sponges, or limescale removers.
How should I clean the exterior surfaces and controls?
The exterior surfaces and controls can be cleaned with a mild solution of warm water and liquid dish soap applied with a soft sponge. Wipe dry using a soft cloth. Only use a slightly damp sponge when cleaning the controls.
How should I clean glass surfaces?
Glass surfaces can be cleaned using glass cleaner.
How should stainless steel surfaces be cleaned?
Stainless steel surfaces can be cleaned using a non-abrasive stainless steel cleaner. A conditioner for stainless steel can also be used to help prevent resoiling. Apply sparingly with even pressure.
How should stainless steel colored controls be cleaned?
Do not use a stainless steel cleaner on these controls.
How often should the grease filter be cleaned?
The grease filter should be cleaned every 3 – 4 weeks.
How do I remove the grease filter?
To remove the grease filter, pull the locking clip forward. Lower the filter 45°, unhook it at the front, and take it out. Support the grease filter so that it does not fall onto the cooktop.
How do I clean the grease filter by hand?
Use a scrub brush with a solution of warm water and mild detergent. Do not use pure detergent, aggressive all purpose cleaners, oven sprays, abrasive cleaning agents or limescale removers.
How do I clean the grease filter in a dishwasher?
Place the filter vertically in the lower basket, making sure that the spray arm is not blocked. Use a wash program with a max. temperature of 150°F (65°C). Use the recommended amount of dishwasher detergent.
What do I do after cleaning the grease filter?
The filter can be placed on a towel to air dry. While the filter is removed, clean any dirt or grease from the interior casing to prevent the risk of fire. When putting the grease filter back, make sure that the locking clip is facing the cooking surface.
How do I remove the grease filter if it is incorrectly installed?
Insert a small screwdriver into the slit along its edge to disengage it from the casing.
Where is the active charcoal filter placed?
The active charcoal filter will be placed in the canopy above the grease filter.
How do I access the active charcoal filter?
Remove the grease filter to access the charcoal filter.
How do I install the charcoal filter?
Insert the charcoal filter. Reinsert the grease filter.
How often should I replace the active charcoal filter?
Replace the active charcoal filter at least every 6 months or when it no longer absorbs odors efficiently.
How do I change the light bulbs?
Use the button above the lamp housing to press the lighting unit slightly downward. Then, turn the halogen light to the left to remove it from the fixture. Use the same bulb type as a replacement. Screw the new halogen bulb into the fixture and press it upward. Replace the grease filter and, if applicable, the charcoal filter.
What should I do if there is a fault I cannot fix myself?
Contact the Miele Technical Service Department.
What information should I provide when contacting the Technical Service Department?
Quote the model and serial number of your appliance. These are shown on the data plate which is visible when the grease filters are removed.
What are the different modes of operation for the ventilation hood?
The ventilation hood offers two modes of operation: air extraction and recirculation mode.
How does the air extraction mode work?
The air is drawn in and cleaned by the grease filter and directed outside. The hood comes equipped with a non-return flap that automatically closes when the hood is turned off, preventing the exchange of outside air and room air. When the hood is turned on, the air pressure of the exhaust fan automatically opens the flap, blowing the inside air and cooking odors outside.
How does the recirculation mode work?
Air is drawn through the grease filter and active charcoal filter. The filtered air is then recirculated back into the kitchen through a vent at the top of the hood’s chimney.
What must I do before using the hood in recirculation mode?
Ensure that the active charcoal filter is in place.
How do I dismantle the hood?
Follow the instructions on the installation diagram in the reverse order. A lever is enclosed for easier removal of the chimney extension. After loosening both of the clamping screws on the chimney, slide the lever between the chimney and the chimney extension and gently apply pressure to ease the chimney from its hooks.
What should I use for exhaust ducting?
Use smooth or flexible pipework made from approved non-flammable materials for exhaust ducting.
What should I consider for efficient air extraction and quiet noise levels?
The diameter of the ductwork should not be less than 6" (150 mm). If flat ducting is used, the cross section must not be smaller than the cross section of the ventilation exhaust. The ducting should be as short and straight as possible. Use ductwork with a wide radius. The exhaust duct must not be bent or compressed. Make sure all connections are secure. Where the ductwork is horizontal, it must slope away from the hood at least 1 /8" per foot (1 cm per meter) to prevent condensation dripping into the appliance. If the exhaust is ducted through an outside wall, a Telescopic Wall Vent can be used. If the exhaust is ducted into an inactive flue, the air must be expelled parallel to the flow direction of the flue.
Can I connect the exhaust hood to an active chimney or other venting systems?
Never connect an exhaust hood to an active chimney, dryer vent, flue, or room venting ductwork. Seek professional advice before connecting an exhaust hood vent to an existing, inactive chimney or vent flue.
What should I do if the ductwork runs through rooms with temperature variations?
It may need to be insulated to reduce condensation.
When is a condensate trap needed?
In some cases, a condensate trap may also be required to collect and evaporate any condensate which may occur.
How do I install a condensate trap?
Ensure that it is positioned vertically and if possible directly above the exhaust outlet.
What should I check before installing the hood?
Verify that the voltage, load and circuit rating information found on the data plate (located behind the grease filter), match the household electrical supply before installing the hood. Use only with ventilation hood cord-connection kits that have been investigated and found acceptable for use with this model hood.
What type of electrical outlet should I use?
The hood comes equipped with a 4 ft (1.2 m) power cord with a NEMA 5-15 molded plug for connection to a 120 VAC, 60 Hz, 15 A power outlet.
CLICK HERE TO DOWNLOAD MIELE DA 5990 W (01) PDF MANUAL