MIDEA MAP05S1AWT (01) PDF MANUAL

MIDEA MAP05S1AWT (01) PDF SUMMARY:

How do I download the app and activate the product?

Scan the QR code to download the SmartHome app from the app store or search for it directly on the Google Play Store or Apple’s App Store. Open the SmartHome app and log in directly if you have an existing SmartHome account, create a new account, or use a 3rd party login platform. When you log in, you may see the message “Smart devices discovered nearby” and you can tap to add your device. If no such message appears, tap on “+” and select your device in the list of nearby available devices. If your device is not listed, add your device manually, first selecting the device category e.g. Window AC. Follow the steps in the app to connect your device to the wireless network, and if your device fails to connect, follow the additional instructions in the app. After pairing successfully, a card will be created for the device in the SmartHome app. Shortcuts for basic functions will appear on the card such as changing the temperature or switching the device on or off. Tapping on the card will reveal additional features and settings.

---

What ambient temperature range is appropriate for unit operation?

When cooling, a temperature range of 16-35°C (60-95°F). When in dry mode, a temperature range of 13-35°C (55-95°F).

---

What are the requirements for the product installation location?

Install the unit on an even surface to minimize noise and vibration. The unit must be installed near a grounded plug, and the Collection Tray Drain (found on the back of the unit) must be accessible. The unit should be located at least 30cm (12”) from the nearest wall to ensure proper air conditioning. The air outlet of the unit should be at least 50cm(19.7”) away from obstacles. Do not cover the Intakes, Outlets or Remote Signal Receptor of the unit, as this could cause damage to the unit.

---

How do I perform exhaust hose and adapter installation?

Connect the adapter to the unit and the window. Base your window slider installation on the accessories in your kit and the size of your window. Choose the window sliders according to the size of your window. Some of the sliders may need to be cut to fit the exact window size, make sure to cut the sliders carefully if this is required. Use bolts to fasten the window sliders once they are adjusted to the proper length.

---

How do I prepare the adjustable window slider?

Install the exhaust hose assembly according to the fittings in your kit. Press the exhaust hose(or extended exhaust hose) into the window slider adaptor and unit adaptor. The pieces will clip together using the tabs on the adapters.

---

How do I complete the sealing of the window?

Insert the window slider assembly into the window opening. If desired, install the security bracket with 2 screws as shown. Cut the non-adhesive foam seal C strip to match the width of the window. Insert the seal between the glass and the window frame to prevent air and insects from getting into the room.

---

How do I perform hung window installation?

Cut the adhesive foam seal A and B strips to the proper lengths, and attach them to the window sash and frame as shown.

---

How do I perform sliding window installation?

Cut the adhesive foam seal A and B strips to the proper lengths, and attach them to the window sash and frame as shown.

---

How do I install the exhaust hose assembly to the unit?

Push the exhaust hose into the air outlet opening of the unit along the arrow direction.

---

How do I connect the adapter to the unit and the window?

Insert the window slider adapter into the hole of the window slider. Insert the window slider assembly into the window opening. If desired, install the security bracket with 2 screws as shown. Cut the non-adhesive foam seal C strip to match the height of the window and insert the seal between the glass and the window frame to prevent air and insects from getting into the room.

---

How do I turn the power on or off?

Press the POWER button.

---

How do I initiate the wireless connection mode?

For the first time using the wireless function, press the POWER button for 3 seconds to initiate the wireless connection mode. The LED DISPLAY shows ‘AP’ to indicate you can set wireless connection. If connection (router) is successful within 8 minutes, the unit will exit wireless connection mode automatically and the wireless indicator illuminates. If connection fails within 8 minutes, the unit exits wireless connection mode automatically. After Wireless connection is successful, for some models you can press MODE and UP (+) buttons at the same time for 3 seconds to turn off Wireless function and the LED DISPLAY shows ‘OF’ for 3 seconds. To turn on Wireless function press MODE button and UP(+) and the LED DISPLAY shows ‘On’ for 3 seconds.

---

How do I control the fan speed?

Press the FAN button to control the fan speed in four steps AUTO, HIGH, LOW, and CONT.

---

How do I turn the continuous fan function on or off?

In COOL or DRY mode, press the Fan button for 3 seconds to turn on or off the continuous fan function. When the function is turned on, the Cont. fan light will illuminate, indicating the fan will run continuously. When the function is turned off, the Cont. fan light will go out, indicating that the fan will stop when the compressor cycles off.

---

How do I select the operating mode?

Press the MODE button. Each time you press the button, the mode is selected in a sequence that goes from AUTO, DRY, COOL and FAN, The mode indicator light illuminates under the different mode setting.

---

How do I use AUTO mode?

Press the “MODE” button until the “Auto” indicator light comes on. In this mode, the fan speed or the temperature will be adjusted automatically.

---

How do I use DRY mode?

Press the “MODE” button until the “Dry” indicator light comes on. In this mode, the fan speed or the temperature cannot be adjusted. The fan motor operates at Auto speed.

---

How do I use COOL mode?

Press the “MODE” button until the “COOL” indicator light comes on. Press the UP and DOWN buttons " " or " " to select your desired room temperature. The temperature can be set within a range of 16°C~30°C/60°F~86°F. Press the "FAN " button to choose the fan speed.

---

How do I use FAN mode?

Press the “MODE” button until the"FAN " indicator light comes on. Press the “FAN SPEED” button on the remote controller to choose the fan speed. The temperature can not be adjusted and do not put the duct to window.

---

How do I adjust the temperature?

Use the UP and DOWN buttons to adjust (increasing/decreasing) temperature settings in 1°C/2°F (or 1°F) increments in a range of 16°C/60°F to 30°C/88°F (or 86°F).

---

How do I change the temperature display between Celsius and Fahrenheit?

Press and hold the Up and Down buttons at the same time for 3 seconds.

---

How do I activate the ComfortSense feature?

Point the remote control towards the unit and press the ComfortSense button. The remote control will send this signal to the AC until the ComfortSense button is pressed again. If the unit does not receive the ComfortSense signal during any 7 minute interval, the unit will exit the ComfortSense mode.

---

What do the error codes on the display mean?

EH00-EEPROM error. EH60-Room temperature sensor error. EH61-Evaporator temperature sensor error. EC52-Condenser temperature sensor error (on some models). EH0b-Display panel communication error. EC-Refrigerant leakage detection malfunction(on some models). P1-Bottom tray is full–Connect the drain hose and drain the collected water away. If protection repeats, call for service.

---

What do I do when a malfunction occurs?

Turn off the unit, and check for any obstructions. Restart the unit, if the malfunction is still present, turn off the unit and unplug the power cord. Contact the manufacturer, its service agents or a similar qualified person for service.

---

How do I handle the remote control?

Use the remote controller within a distance of 26.2 ft (8 meters) from the air conditioner, pointing it towards the receiver. Reception is confirmed by a beep. The air conditioner will not operate if curtains, doors or other materials block the signals from the remote control to the unit. Prevent any liquid from spilling onto the remote control and do not expose the remote control to direct sunlight or heat. If the infrared signal receiver on the indoor unit is exposed to direct sunlight, the air conditioner may not function properly. If other electrical appliances react to the remote control, either move these appliances or consult your local dealer.

---

How do I select the desired operation mode using the remote?

Press the MODE button.

---

How do I increase the indoor temperature setting using the remote?

Press the TEMP UP Button.

---

How do I decrease the indoor temperature setting using the remote?

Press the TEMP DOWN button.

---

How do I select the desired fan speed using the remote?

Use the SPEED button.

---

How do I activate the Sleep mode using the remote?

Press the SLEEP button. This function is available on COOL or AUTO mode only and will maintain the most comfortable temperature for you while saving energy.

---

How do I activate the ComfortSense mode?

Press the COMFORTSENSE button to active the ComfortSense mode, to optimize the temperature around you and ensure maximum comfort.

---

How do I activate the “Auto Start” or “Auto Stop” program?

Press the TIMER button.

---

How do I start or stop operation using the remote?

Operation starts when the ON/OFF button is pressed and stops when the button is pressed again.

---

How do I set the Auto-start/stop time?

Press the TIMER button, when the TIMER ON indicator is displayed on the LED window of the air conditioner, it indicates the Auto Start setting program is initiated. When the TIMER OFF indicator is displayed on the LED window of the air conditioner, it indicates the Auto Stop setting program is initiated. Press or hold the TEMP UP ( )/DOWN ( ) to change the Auto time. The control will count down the time remaining until start/stop. The selected time will register in 5 seconds and the air conditioner will automatically revert back to display the previous temperature setting. Turning the unit ON or OFF at any time will cancel the Auto Start/stop function. To cancel the TIMER setting, push the TIMER button and press or hold the TEMP UP ( )/ DOWN ( ) until 0 hour is displayed on the LCD window of the air conditioner.

---

How do I set a combined timer?

To stop the air conditioner 2 hours after setting and start it again 10 hours after setting: Press the TIMER button until the TIMER OFF indicator is displayed on the LED display of the air conditioner. Use the TEMP UP ( )/DOWN ( ) button to display “2.0” on the LED display of the air conditioner. Press the TIMER button again to display the TIMER OFF on the LED display of the unit. Use the TEMP UP ( )/DOWN ( ) button to display “10” on the LED display of the unit. Wait for 5 seconds until the previous display appears in LED window. To start the air conditioner 5 hours after setting, and stop it 8 hours after setting: Press the TIMER button until the TIMER ON indicator is displayed on the LED display of the air conditioner. Use the TEMP UP ( )/DOWN ( ) button to display “5.0” on the LED display of the air conditioner. Press the TIMER button again to display the TIMER OFF on the LED display of the unit. Use the TEMP UP ( )/DOWN ( ) button to display “8.0” on the LED display of the unit. Wait for 5 seconds until the previous display appears in LED window.

---

How do I set the TIMER ON function?

Press the TIMER ON button. By default, the last time period that you set and an “h” (indicating hours) will appear on the display. Press the TIMER ON button repeatedly to set the amount of time after the current time you want the unit to turn on. Wait 2 seconds, then the TIMER ON function will be activated. The digital display on your remote control will then return to the temperature display.

---

How do I set the TIMER OFF function?

Press the TIMER OFF button. By default, the last time period that you set and an “h” (indicating hours) will appear on the display. Press the TIMER OFF button repeatedly to set the time that you want the unit to turn off. Wait 2 seconds, then the TIMER OFF function will be activated and the digital display on your remote control will then return to the temperature display.

---

How do I connect to smart speakers through Matter?

Make sure your mobile device is connected to your wireless router and that the wireless router should support and turn on IPv6. Make sure your smartphone connect to 2.4G but not 5G network. Select your preferred ecosystems (Alexa, Google Home or Apple Home) and make sure you’ve got one of their Matter enabled products (such as their smart speakers) connected to your wireless router. Turn on Bluetooth on your mobile device. Windows AC: Hold down the CONNECT / Power button for 3 seconds to begin the pairing process (“AP” will appear on the AC’s display). Portable AC: Hold down the SWING / Power button for 3 seconds to begin the pairing process (“AP” will appear on the AC’s display). Open the Alexa, Google Home or Apple Home app on your mobile device. Tap the “+” and “Add Device/ Accessory” or tap “+Add” in your app and then select Matter device and scan the Matter QR code found on the side of the AC device. Follow the respective instructions in the Alexa, Google Home or Apple Home app to complete the pairing process. After pairing is successful, you can control your AC’s temperature and mode settings, etc. through the respective ecosystem app and smart speaker.

---

What do I do if the unit beeps 8 times and the digital display area shows “P1?” Carefully move the unit to a drain location, remove the bottom drain plug and let the water drain away. Reinstall the bottom drain plug and restart the machine until the “P1” symbol disappears. If the error repeats, call for service.

---

How do I use the water collection tray drainage guide?

Remove the bottom drain plug.

---

How do I use the dehumidifying mode drainage guide?

Remove the drain plug from the back of the unit, and install the drain connector (5/8" universal female mender) with 3/4" hose. Place the open end of the hose directly over the drain area in your basement floor.

---

How do I clean the air filter and cabinet?

Always unplug the unit before cleaning or servicing. Do NOT use flammable liquids or chemicals to clean the unit. Do NOT wash the unit under running water because doing so causes electrical danger. Do NOT operate the machine if the power supply was damaged during cleaning and a damaged power cord must be replaced with a new cord from the manufacturer. Clean the unit using a damp, lint-free cloth and mild detergent, then dry the unit with a dry, lint-free cloth. Be sure to clean the air filter every 2 weeks for optimal performance. In households with animals, you will have to periodically wipe down the grill to prevent blocked airflow due to animal hair.

---

How do I store the unit when not in use?

Drain the unit’s water collection tray according to the instructions in the drainage guide section. Run the appliance on FAN mode for 12 hours in a warm room to dry it and prevent mold. Clean the unit according to the instructions in the previous section. Clean the air filters according to the instructions in the previous section and reinstall the clean dry filter before storing. Remove the batteries from the remote control. Be sure to store the unit in a cool, dark place because exposure to direct sunshine or extreme heat can shorten the lifespan of the unit. The cabinet and front may be dusted with an oil-free cloth or washed with a cloth dampened in a solution of warm water and mild liquid dishwashing detergent. Rinse thoroughly and wipe dry and never use harsh cleansers, wax or polish on the cabinet front. Be sure to wring excess water from the cloth before wiping around the controls because excess water in or around the controls may cause damage to the unit.

---

What do I do if the unit does not turn on when pressing the ON/OFF button?

Check the set temperature.

---

What do I do if the unit does not cool well?

Decrease the set temperature. Make sure all windows and doors are closed. Double-check the cooling area. Remove the heat sources if possible. Turn off the unit, disconnect the hose, check for blockage and reconnect the hose. Call a service technician to inspect the unit and top off refrigerant.

---

What do I do if the unit is noisy and vibrates too much?

Place the unit on a flat, level surface.

---

What do I do if the air filter is blocked with dust or animal hair?

Turn off the unit and clean the filter according to instructions.